scholarly journals The CORE Sequence: A Nanoscale Fluorocarbon-Free Silicon Plasma Etch Process Based on SF6/O2 Cycles with Excellent 3D Profile Control at Room Temperature

2020 ◽  
Vol 9 (2) ◽  
pp. 024002 ◽  
Author(s):  
Vy Thi Hoang Nguyen ◽  
Chantal Silvestre ◽  
Peixiong Shi ◽  
Roy Cork ◽  
Flemming Jensen ◽  
...  
2014 ◽  
Vol 556-562 ◽  
pp. 2208-2211
Author(s):  
Xue Feng Yang

According to the need of the real-time monitoring and displaying of the environment in many areas,to put forward a method of temperature monitoring and displaying, using STC11F32XE microcontroller as the core controller, DS18B20 as temperature acquisition chip, 32X64LED dot matrix screen as a display screen,using the mothod of multi point detection method,real-time monitoring of swimming pool water temperature and room temperature, real-time displaying of Multipoint collecting information, Real time processing the detected temperature, the page display to multipoint temperature display through the wireless remote control module,the system will alarm When the water temperature is too high or too low, to remind managers of real-time processing.To design a clear temperature display for the swimming pool,real time monitoring and controlling is very convenient,after the experimental verification, the system reaches the anticipative goal,the system is an ideal and effective.


mBio ◽  
2015 ◽  
Vol 6 (5) ◽  
Author(s):  
Kathleen A. Glass ◽  
Max C. Golden ◽  
Brandon J. Wanless ◽  
Wendy Bedale ◽  
Charles Czuprynski

ABSTRACT A 2014 multistate listeriosis outbreak was linked to consumption of caramel-coated apples, an unexpected and previously unreported vehicle for Listeria monocytogenes. This outbreak was unanticipated because both the pH of apples (<4.0) and the water activity of the caramel coating (<0.80) are too low to support Listeria growth. In this study, Granny Smith apples were inoculated with approximately 4 log10 CFU of L. monocytogenes (a cocktail of serotype 4b strains associated with the outbreak) on each apple's skin, stem, and calyx. Half of the apples had sticks inserted into the core, while the remaining apples were left intact. Apples were dipped into hot caramel and stored at either 7°C or 25°C for up to 11 or 28 days, respectively. Data revealed that apples with inserted sticks supported significantly more L. monocytogenes growth than apples without sticks under both storage conditions. Within 3 days at 25°C, L. monocytogenes populations increased >3 log10 in apples with sticks, whereas only a 1-log10 increase was observed even after 1 week for caramel-coated apples without sticks. When stored at 7°C, apples with sticks exhibited an approximately 1.5-log10 increase in L. monocytogenes levels at 28 days, whereas no growth was observed in apples without sticks. We infer that insertion of a stick into the apple accelerates the transfer of juice from the interior of the apple to its surface, creating a microenvironment at the apple-caramel interface where L. monocytogenes can rapidly grow to levels sufficient to cause disease when stored at room temperature. IMPORTANCE Neither caramel nor apples are a food where the pathogenic bacterium Listeria monocytogenes should grow, as caramel does not contain enough free water and apples are too acidic. Caramel-coated apples, however, were recently linked to a deadly outbreak of listeriosis. We hypothesized that inserting a stick into the apple releases juice to the interface between the apple and caramel, providing a more hospitable environment than either component alone. To test this hypothesis, apples were inoculated with L. monocytogenes prior to caramel dipping. Some apples had sticks inserted into them before dipping, while others did not. No growth of L. monocytogenes occurred on refrigerated caramel apples without sticks, whereas slow growth was observed on refrigerated caramel apples with sticks. In contrast, significant pathogen growth was observed within 3 days at room temperature on caramel apples with sticks inserted. Food producers should consider interfaces between components within foods as potential niches for pathogen growth.


1988 ◽  
Vol 8 (7) ◽  
pp. 2690-2697
Author(s):  
P Friden ◽  
P Schimmel

LEU3 of Saccharomyces cerevisiae encodes an 886-amino-acid polypeptide that regulates transcription of a group of genes involved in leucine biosynthesis and has been shown to bind specifically to a 114-base-pair DNA fragment of the LEU2 upstream region (P. Friden and P. Schimmel, Mol. Cell. Biol. 7:2707-2717, 1987). We show here that, in addition to LEU2, LEU3 binds in vitro to sequences in the promoter regions of LEU1, LEU4, ILV2, and, by inference, ILV5. The largely conserved decanucleotide core sequence shared by the binding sites in these genes is CCGGNNCCGG. Methylation interference footprinting experiments show that LEU3 makes symmetrical contacts with the conserved bases that lie in the major groove. Synthetic oligonucleotides (19 to 29 base pairs) which contain the core decanucleotide and flanking sequences of LEU1, LEU2, LEU4, and ILV2 have individually been placed upstream of a LEU3-insensitive test promoter. The expression of each construction is activated by LEU3, although the degree of activation varies considerably according to the specific oligonucleotide which is introduced. A promoter construction with substitutions in the core sequence remains LEU3 insensitive, however. One of the oligonucleotides (based on a LEU2 sequence) was also tested and shown to confer leucine-sensitive expression on the test promoter. The results demonstrate that only a short sequence element is necessary for LEU3-dependent promoter binding and activation and provide direct evidence for an expanded repertoire of genes that are activated by LEU3.


Author(s):  
Nagaraj K. Arakere

Hot section components in high performance aircraft and rocket engines are increasingly being made of single crystal nickel superalloys such as PWA1480, PWA1484, CMSX-4 and Rene N-4 as these materials provide superior creep, stress rupture, melt resistance and thermomechanical fatigue capabilities over their polycrystalline counterparts. Fatigue failures in PWA1480 single crystal nickel-base superalloy turbine blades used in the Space Shuttle Main Engine (SSME) fuel turbopump are discussed. During testing many turbine blades experienced Stage II non-crystallographic fatigue cracks with multiple origins at the core leading edge radius and extending down the airfoil span along the core surface. The longer cracks transitioned from stage II fatigue to crystallographic stage I fatigue propagation, on octahedral planes. An investigation of crack depths on the population of blades as a function of secondary crystallographic orientation (β) revealed that for β = 45+/- 15 degrees tip cracks arrested after some growth or did not initiate at all. Finite element analysis of stress response at the blade tip, as a function of primary and secondary crystal orientation, revealed that there are preferential β orientations for which crack growth is minimized at the blade tip. To assess blade fatigue life and durability extensive testing of uniaxial single crystal specimens with different orientations has been tested over a wide temperature range in air and hydrogen. A detailed analysis of the experimentally determined Low Cycle Fatigue (LCF) properties for PWA1480 and SC 7-14-6 single crystal materials as a function of specimen crystallographic orientation is presented at high temperature (75 F – 1800 F) in high-pressure hydrogen and air. Fatigue failure parameters are investigated for LCF data of single crystal material based on the shear stress amplitudes on the 24 octahedral and 6 cube slip systems for FCC single crystals. The max shear stress amplitude [Δτmax] on the slip planes reduces the scatter in the LCF data and is found to be a good fatigue damage parameter, especially at elevated temperatures. The parameter Δτmax did not characterize the room temperature LCF data in high-pressure hydrogen well because of the noncrystallographic eutectic failure mechanism activated by hydrogen at room temperature. Fatigue life equations are developed for various temperature ranges and environmental conditions based on power-law curve fits of the failure parameter with LCF test data. These curve fits can be used for assessing blade fatigue life.


2010 ◽  
Vol 663-665 ◽  
pp. 1256-1259
Author(s):  
Gui Mei Shi ◽  
Ge Song ◽  
Shu Lian ◽  
Jin Bing Zhang

A new type of antiferromagnetic CoAl2O4 coated ferromagnetic Co solid solution is synthesized by arc-discharging. Typical HRTEM images show that the nanocapsules form in a core-shell structure. The size of the nanocapsules is in range of 10-90 nm and the thickness of the shell is about 3-10 nm. X-ray photoelectron spectrum (XPS) and X-ray diffraction (XRD) reveal that the core consists of Co solid solution, while the shell is CoAl2O4. The magnetic field and temperature dependence of magnetizations confirm that the Co solid solution nanocapsules are basically in the ferromagnetic state below Curie temperature. In addition, the antiferromagnetic order occurs with Neél temperature TN of about 5 K. The saturation magnetization of Ms = 76.1 Am2/kg and the coercive force of Hc= 23.28 kA/m are achieved at room temperature for the Co solid solution nanocapsules.


2016 ◽  
Vol 22 (5) ◽  
pp. 987-996 ◽  
Author(s):  
Liudmila D. Iskhakova ◽  
Filipp O. Milovich ◽  
Valery M. Mashinsky ◽  
Alexander S. Zlenko ◽  
Sergey E. Borisovsky ◽  
...  

AbstractThe nature of nanocrystalline inclusions and dopant distribution in bismuth-doped silicate fibers and preforms are studied by scanning and transmission electron microscopy, and energy and wavelength-dispersive X-ray microanalysis. The core compositions are Bi:SiO2, Bi:Al2O3–SiO2, Bi:GeO2–SiO2, Bi:Al2O3–GeO2–SiO2, and Bi:P2O5–Al2O3–GeO2–SiO2. Nanocrystals of metallic Bi, Bi2O3, SiO2, GeO2, and Bi4(GeO4)3 are observed in these glasses. These inclusions can be the reason for the background optical loss in bismuth-doped optical fibers. The bismuth concentration of 0.0048±0.0006 at% is directly measured in aluminosilicate optical fibers with effective laser generation (slope efficiency of 27% at room temperature).


Nutrients ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 348 ◽  
Author(s):  
Yasuhisa Ano ◽  
Tatsuhiro Ayabe ◽  
Rena Ohya ◽  
Keiji Kondo ◽  
Shiho Kitaoka ◽  
...  

Tryptophan-tyrosine (WY)-related peptides including the β-lactopeptide of the glycine-threonine-tryptophan-tyrosine peptide, β-lactolin, improve spatial memory. However, whether and how the WY dipeptide as the core sequence in WY-related peptides improves memory functions has not been investigated. This study assessed the pharmacological effects of the WY dipeptide on memory impairment to elucidate the mechanisms. Here, we showed that oral administration of dipeptides of WY, tryptophan-methionine (WM), tryptophan-valine, tryptophan-leucine, and tryptophan-phenylalanine improved spontaneous alternation of the Y-maze test in scopolamine-induced amnesic mice. In contrast, tyrosine-tryptophan, methionine-tryptophan, tryptophan, tyrosine, and methionine had no effect. These results indicated that the conformation of dipeptides with N-terminal tryptophan is required for their memory improving effects. WY dipeptide inhibited the monoamine oxidase B activity in vitro and increased dopamine levels in the hippocampus and frontal cortex, whereas tryptophan did not cause these effects. In addition, the treatment with SCH-23390, a dopamine D1-like receptor antagonist, and the knockdown of the hippocampal dopamine D1 receptor partially attenuated the memory improvement induced by the WY dipeptide. Importantly, WY dipeptide improved the spontaneous alternations of the Y-maze test in aged mice. These results suggest that the WY dipeptide restores memory impairments by augmenting dopaminergic activity. The development of supplements rich in these peptides might help to prevent age-related cognitive decline.


Author(s):  
Pei-Wen Sun ◽  
Yan-Hong Xu ◽  
Cui-Cui Yu ◽  
Fei-Fei Lv ◽  
Xiao-Lin Tang ◽  
...  

Abstract Agarwood is derived from wounded Aquilaria trees and is widely used in traditional medicine, incense, and perfume. Sesquiterpenes are one of the main active components in agarwood and are known to be induced by wounding or injury. The molecular mechanism by which wounding leads to sesquiterpene formation remains largely unknown. ASS1 is one of key enzymes responsible for the biosynthesis of sesquiterpenes and is a pivotal jasmonate (JA)-responsive wound-inducible synthase. However, why ASS1 does not express in healthy trees and how its expression is induced as a result of wounding remains unexplored. Here, we report that ASS1 is a wound-induced gene with a promoter in which the 242-bp (-973 to -731bp) region is identified as the core sequence for responding to wound signals. AsWRKY44 binds directly to this region and represses ASS1 promoter activity. Downregulation or disruption of AsWRKY44 can relieve the inhibition and activate ASS1 expression. Further, it is found that in response to the exogenous MeJA, AsWRKY44 is degraded and the expression of ASS1 is significantly upregulated. These findings confirm AsWRKY44 is a crucial negative regulator involved in the regulation of wound-induced ASS1 transcription, which reveals the core mechanism of agarwood sesquiterpenes biosynthesis.


2016 ◽  
Vol 4 ◽  
pp. 22
Author(s):  
Filip Fejt

The paper deals with thermal-hydraulic analysis during reactivity insertion accident, i.e. a step increase of nuclear system reactivity by 0.7 eff, at VR-1 Reactor. The reactor utilizes IRT-4M type of fuel assemblies, and even though these fuel assemblies are designed for an operation at the high-power research reactors, they might be also used for zero-power reactors. The thermal-hydraulic analyses must take into account several specific assumptions that are derived from VR-1 reactor specifications. The reactor does not require a forced water flow for a fuel cooling, the core is placed in an open vessel with atmospheric pressure, and amount of coolant water in the vessel is sufficient for providing the inlet water at room temperature for the whole event. Coolant circulation is expected to be formed only by natural convection.


2005 ◽  
Author(s):  
D. Vrtacnik ◽  
D. Resnik ◽  
U. Aljancic ◽  
M. Mozek ◽  
S. Amon

Sign in / Sign up

Export Citation Format

Share Document