scholarly journals Multifunction of Ni/Ag Nanocompound Fluid

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Mu-Jung Kao
Keyword(s):  
Thermal Conductivity ◽  
Visible Light ◽  
Nanoparticle Synthesis ◽  
Magnetic Characteristic ◽  
Electrical Energy ◽  
Characteristic Analysis ◽  
Synthesis System ◽  
Spectra Analysis ◽  
Heating Source ◽  
Higher Temperature

An arc-submerged nanoparticle synthesis system (ASNSS) is proposed and developed for fabricating Ni/Ag nanocompound fluid. In the development process, the positive and negative electrodes in the system are Ni and Ag, respectively. Applied electrical energy then produces heating source by generating an adequate arc with a high temperature that can melt and vaporize the two electrodes. The nanocompound fluid that is generated by the synthesis system is analyzed by morphological analysis, Zeta potential analysis, heat conductivity analysis, magnetic characteristic analysis, and UV-Vis absorption spectra analysis. Experimental results show that increasing the concentration of added particles and the higher temperature can be helpful to the enhancement of thermal conductivity. The Ni/Ag nanofluid not only preserves the magnetic character of the nickel and the ability of silver to absorb visible light but also enhances the thermal conductivity. The absorption occurs at 406 nm wavelength (redshift from 396 nm to 406 nm), which means that, under the excitement of visible light range (400~700 nm), it can let more easy electrons jump to the conductivity zone from the valence electron zone.

850.0 and 852.0 ALUMINUM ALLOY BEARING BARS

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Heat Treating ◽  
Light Metal ◽  
General Purpose ◽  
High Ductility ◽  
Higher Temperature ◽  
Bearing Alloy

Abstract 850.0 ALUMINUM Alloy can be considered the general purpose light metal bearing alloy. Its good thermal conductivity keeps operating temperatures low. It has high ductility. In many applications it has been found to be superior to steel backed bearings. 852.0 ALUMINUM Alloy has higher mechanical properties making it suitable for heavier load and higher temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Al-290. Producer or source: Federated Bronze Products Inc..

scholarly journals Apparatus for routine measurements of the thermal conductivity of ice cores

1999 ◽  
Vol 29 ◽  
pp. 151-154 ◽  
Author(s):  
Crescenzo Festa ◽  
Aristide Rossi
Keyword(s):  
Thermal Conductivity ◽  
Ice Cores ◽  
Maximum Temperature ◽  
Transient Hot Wire ◽  
Hot Wire ◽  
Standard Samples ◽  
Experimental Conditions ◽  
Heating Source ◽  
Central Segment ◽  
Wire Method

AbstractAn apparatus is described for measuring the thermal conductivity of ice by the transient hot-wire method. Thermal conductivity A, is determined by tracking the thermal pulse induced in the sample by a heating source consisting of a platinum resistor. A central segment of the same platinum heating resistor acts also as a thermal sensor. A heat pulse transferred to the ice for a period of 40s gives a maximum temperature increment of about 7-14°C. In good experimental conditions, the expected reproducibility of the measurements is within ±3%. The accuracy of the method depends on whether the instrument has been calibrated by reliable standard samples, certified by absolute methods.

MeV Ion-Beam Bombardment Effects on The Thermoelectric Figures of Merit of Zn4Sb3 and ZrNiSn-Based half-heusler compounds

2007 ◽  
Vol 1020 ◽  
Author(s):  
S. Budak ◽  
S. Guner ◽  
C. Muntele ◽  
C. C. Smith ◽  
B. Zheng ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Seebeck Coefficient ◽  
Measurement System ◽  
Ion Beam ◽  
Electrical Energy ◽  
Figures Of Merit ◽  
Material Systems ◽  
The Cross ◽  
Conductivity Of Thin Films

AbstractSemiconducting â-Zn4Sb3and ZrNiSn-based half-heusler compound thin films were prepared by co-evaporation for the application of thermoelectric (TE) materials. High-purity solid zinc and antimony were evaporated by electron beam to grow the â-Zn4Sb3thin film while high-purity zirconium powder and nickel tin powders were evaporated by electron beam to grow the ZrNiSn-based half-heusler compound thin film. Rutherford backscattering spectrometry (RBS) was used to analyze the composition of the thin films. The grown thin films were subjected to 5 MeV Si ions bombardments for generation of nanostructures in the films. We measured the thermal conductivity, Seebeck coefficient, and electrical conductivity of these two systems before and after 5 MeV Si ions beam bombardments. The two material systems have been identified as promising TE materials for the application of thermal-to-electrical energy conversion, but the efficiency still limits their applications. The electronic energy deposited due to ionization in the track of MeV ion beam can cause localized crystallization. The nanostructures produced by MeV ion beam can cause significant change in both the electrical and the thermal conductivity of thin films, thereby improving the efficiency. We used the 3ù-method measurement system to measure the cross-plane thermal conductivity ,the Van der Pauw measurement system to measure the cross-plane electrical conductivity, and the Seebeck-coefficient measurement system to measure the cross-plane Seebeck coefficient. The thermoelectric figures of merit of the two material systems were then derived by calculations using the measurement results. The MeV ion-beam bombardment was found to decrease the thermal conductivity of thin films and increase the efficiency of thermal-to-electrical energy conversion.

scholarly journals Estimations on Properties of Redox Reactions to Electrical Energy and Storage Device of Thermoelectric Pipe (TEP) Using Polymeric Nanofluids

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1812
Author(s):  
Qin Gang ◽  
Rong-Tsu Wang ◽  
Jung-Chang Wang
Keyword(s):  
Thermal Conductivity ◽  
Power Density ◽  
Heat Dissipation ◽  
Electrical Energy ◽  
Steel Tube ◽  
Storage Device ◽  
Stainless Steel Tube ◽  
The Novel ◽  
Empirical Formulas ◽  
Dissipative Heat

A thermoelectric pipe (TEP) is constructed by tubular graphite electrodes, Teflon material, and stainless-steel tube containing polymeric nanofluids as electrolytes in this study. Heat dissipation and power generation (generating capacity) are both fulfilled with temperature difference via the thermal-electrochemistry and redox reaction effects of polymeric nanofluids. The notion of TEP is to recover the dissipative heat from the heat capacity generated by the relevant machine systems. The thermal conductivity and power density empirical formulas of the novel TEP were derived through the intelligent dimensional analysis with thermoelectric experiments and evaluated at temperatures between 25 and 100 °C and vacuum pressures between 400 and 760 torr. The results revealed that the polymeric nanofluids composed of titanium dioxide (TiO2) nanoparticles with 0.2 wt.% sodium hydroxide (NaOH) of the novel TEP have the best thermoelectric performance among these electrolytes, including TiO2 nanofluid, TiO2 nanofluid with 0.2 wt.% NaOH, deionized water, and seawater. Furthermore, the thermal conductivity and power density of the novel TEP are 203.1 W/(m·K) and 21.16 W/m3, respectively.

Characterization of Tissue Thermal Conductivity During a Tissue Joining Process

2016 ◽  
Author(s):  
Che-Hao Yang ◽  
Yang Liu ◽  
Wei Li ◽  
Roland K. Chen
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Tissue Sample ◽  
Heat Transfer Analysis ◽  
Vessel Sealing ◽  
Inverse Heat Transfer ◽  
Thermal Spread ◽  
Higher Temperature ◽  
Postoperative Problems ◽  
Joining Process

Electrosurgical vessel sealing, a tissue joining process, has been widely used in surgical procedures, such as prostatectomies for bleeding control. The heat generated during the process may cause thermal damages to the surrounding tissues which can lead to detrimental postoperative problems. Having better understanding about the thermal spread helps to minimize these undesired thermal damages. The purpose of this study is to investigate the changes of tissue thermal conductivity during the joining process. We propose a hybrid method combining experimental measurement with inverse heat transfer analysis to determine thermal conductivity of thin tissue sample. Instead of self-heating the tissue by the thermistor, we apply an external cold boundary on the other side of the tissue sample to stimulate a higher temperature gradient without denaturing the tissue in comparison to the heated method. The inverse heat transfer technique was then applied to determine the tissue thermal conductivity. Tissue thermal conductivity at different levels (0%, 25%, 50%, 75%, and 100%) of the joining process was measured. The results show a decreasing trend in tissue thermal conductivity with increasing joining level. When the tissue is fully joined, an average of 60% reduction in tissue thermal conductivity was found.

Uni-Leg Thermoelectric Module Comprised by Coated Hybrid-Perovskite Thin Film

2019 ◽  
Author(s):  
Shrikant Saini ◽  
Ajay Kumar Baranwal ◽  
Tomohide Yabuki ◽  
Shuzi Hayase ◽  
Koji Miyazaki
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Flexible Electronics ◽  
Thermoelectric Module ◽  
Electrical Energy ◽  
Maximum Output ◽  
Thermoelectric Modules ◽  
Wet Process

Abstract Thermoelectric materials can convert thermal energy into electrical energy without any moving part which leads its path of application to the era of printed and flexible electronics. CsSnI3 perovskite can be a promising thermoelectric material for the next-generation energy conversion due to its intrinsic ultra-low thermal conductivity and large Seebeck coefficient but enhancement of electrical conductivity is still required. CsSnI3 can be prepared by wet process which can reduce the cost of flexible thermoelectric module. In this work, CsSnI3 thin films were fabricated by spin coating wet process. Thin films were structurally and chemically characterized using XRD and SEM. Thermoelectric properties such as electrical conductivity, Seebeck coefficient, and thermal conductivity were measured at 300 K. Uni-leg thermoelectric modules were fabricated on a glass substrate using CsSnI3 thin films. The maximum output is about 0.8 nW for 5 legs (25 mm × 3 mm × 600 nm) modules for the temperature difference of about 5°C. These results will open a new pathway to thermoelectric modules for flexible electronics in spite of low output power.

Thermoelectric Transport in Silicon Germanium Nanocomposite

2008 ◽  
Author(s):  
Hohyun Lee ◽  
Daryoosh Vashaee ◽  
Xiaowei Wang ◽  
Giri Joshi ◽  
Gaohua Zhu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Conversion ◽  
Silicon Germanium ◽  
Figure Of Merit ◽  
Waste Heat ◽  
Electrical Energy ◽  
Energy Conversion Efficiency ◽  
Thermoelectric Effects ◽  
Thermoelectric Transport ◽  
Potential Applications

Direct energy conversion between heat and electrical energy based on thermoelectric effects is attractive for potential applications in waste heat recovery and environmentally-friendly refrigeration. The energy conversion efficiency depends on the dimensionless figure of merit of thermoelectric materials, ZT, which is proportional to the electrical conductivity, the square of the Seebeck coefficient, and the inverse of the thermal conductivity. Currently, the low ZT values of available materials restrict the applications of this technology. However, significant enhancements in ZT were recently reported in nanostructured materials such as superlattices mainly due to their low thermal conductivities. According to recent studies, the reduced thermal conductivity of nanostructures is attributed to the large number of interfaces at which phonons are scattered. Based on this idea, nanocomposites are expected to have a lower thermal conductivity than their bulk counterparts with low fabrication cost just by mixing nano sized particles. In this work, we will discuss mechanisms of thermoelectric transport via modeling and provide experimental evidence on the enhancement of thermoelectric figure of merit in SiGe-based nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document