scholarly journals Test Study on Airtight Capability of Filter Cakes for Slurry Shield and Its Application in a Case

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Fanlu Min ◽  
Wei Zhu ◽  
Shengquan Xia ◽  
Rui Wang ◽  
Daiwei Wei ◽  
...  
Keyword(s):  
Yangtze River ◽  
Filter Cake ◽  
Water Pressure ◽  
Air Pressure ◽  
Test Results ◽  
Test Study ◽  
Capillary Bundle ◽  
Slurry Shield ◽  
Filter Cakes ◽  
The Relationship

To learn the airproof capacity of filter cakes as opening chambers under air pressure, a series of tests were carried out. The variations of discharged water with air pressure and time were observed, and the relationship between airproof capacity of filter cakes and surrounding air pressure was analysed. The test results indicated that there were three stages as compressed air acting on filter cakes: completely not infiltration, a very small amount of infiltration, and penetration leakage. The certain air pressure between the first and second stages was called the airproofing value of filter cake. And a capillary bundle model was used to explain the mechanism of air tightness of filter cakes. In Nanjing Yangtze River Tunnel, a 5 cm thickness filter cake was formed in gravel sand, and its airproofing value was a little lower than 0.12 MPa. The air pressure used as opening chamber should be equal to the summation of water pressure in sand and airproofing value of filter cake. While the air pressure is larger than the summation, the filter cake would be gas permeable. The slurry formulation and airproofing value of filter cakes obtained in the tests were applied successfully in Nanjing Yangtze River Tunnel.

Model Test Study on Added Mass Coefficient of Four Buckets Foundation Ocean Platform

2011 ◽  
Vol 243-249 ◽  
pp. 4728-4732
Author(s):  
Hong Yan Ding ◽  
Xian Qing Liu ◽  
Jing Hua Diao ◽  
Pu Yang Zhang
Keyword(s):  
Natural Frequency ◽  
Model Test ◽  
Bottom Water ◽  
Water Pressure ◽  
Added Mass ◽  
Air Pressure ◽  
Test Study ◽  
Pitch Frequency ◽  
Mass Coefficient ◽  
Added Mass Coefficient

In this paper, the internal air pressure and bottom water pressure of the buckets, the acceleration of swaying, surging and heaving of platform were determined by the sensors fixed on the platform, as a naval bucket foundation platform for example. The motion rules of heave and sway of bucket foundations are studied with different drafts. The results of this test showed that the added mass coefficient of heave, roll and pitch are declined with the increase of the draft; the natural frequency of heave is constant with different drafts but the roll frequency and pitch frequency are consistent with the changes of the draft; the frequency of heave is larger than that of roll and pitch but the added mass coefficient of heave is lesser than that of roll and pitch.

scholarly journals Air Pressure-Assisted Centrifugal Dewatering of Concentrated Fine Sulfide Particles

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
R. Asmatulu
Keyword(s):  
Centrifugal Force ◽  
Fine Particles ◽  
Applied Pressure ◽  
Air Pressure ◽  
The Novel ◽  
Test Results ◽  
Filtration Method ◽  
Cake Moisture ◽  
The Cost ◽  
Filter Cakes

An air pressure-assisted centrifugal dewatering method was developed and used for the dewatering of concentrated finesulfide particles, such as sphalerite, galena, and chalcopyrite. This filtration method was mainly designed to increase the filtration rate during the drainage cycle and, hence, produce drier filter cakes, which in turn could reduce the cost and emission problems/concerns of thermal dryers in the preparation plants. Several dewatering parameters, including applied pressure, centrifugal force (G-force), spin time, cake thickness, and surface hydrophobization, were tested to optimize the processing conditions. Test results showed that, at higher air pressure and centrifugal force, the cake moisture reduction was more than 70%, depending on the testing conditions. As a result, it can be-concluded that the novel filtration method effectively works on the dewatering of fine particles (–150 μm).

Problematic Internet Use digunakan Ketika Kesepian pada Remaja

2020 ◽  
Vol 14 (1) ◽  
pp. 45-60
Author(s):  
Yashinta Yashinta ◽  
Dwi Hurriyati
Keyword(s):  
Internet Use ◽  
Hypothesis Test ◽  
Problematic Internet Use ◽  
Coefficient Of Determination ◽  
Test Results ◽  
Research Subjects ◽  
Significance Level ◽  
Relationship Of ◽  
The Relationship ◽  
Effective Contribution

This study aims to determine the relationship of loneliness with problematic internet use on boarding students on Silaberanti street in Siantan jaya Opposite Ulu 1 Palembang city. Research subjects numbered 220 people using random sampling methods. Data was collected using a 60 item problematic internet use scale and a 60 item loneliness. Realibility is generated on scale of problematic internet use of 0,955 and loneliness of 0,946.Hypothesis testing uses product moment correlation analysis techniques. Hypothesis test results showed a positive relationshif between loneliness with problematic internet use on boarding students on Silaberanti street in Siantan jaya Opposite Ulu 1 Palembang city r= 0,684 with a significance level of 0,000 (p<0,01). Loneliness in this study made an effective contribution of 46,8% to problematic internet use which can be seen from the coefficient of determination (r²) that is equel to 0,468.

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

Adolescent smoking behavior and communication with parents: Depression as a mediator and gender as a moderator

2019 ◽  
Vol 47 (10) ◽  
pp. 1-9 ◽  
Author(s):  
Xieping Chen ◽  
Qian Xie ◽  
Yuting Yang
Keyword(s):  
Smoking Behavior ◽  
Depression Scale ◽  
Epidemiological Studies ◽  
Adolescent Smoking ◽  
Junior High Schools ◽  
Test Results ◽  
Negative Effect ◽  
And Gender ◽  
The Relationship ◽  
Communication Scale

Parent–adolescent communication is assumed to be an important factor affecting adolescent smoking behavior. However, the inner mechanism accounting for this association has still not been clarified in research. Our purpose in this study was to examine the relationships between parent–adolescent communication, adolescent smoking behavior, and depression, as well as gender differences in the relationship between depression and adolescent smoking behavior. Participants were 1,134 students at 6 junior high schools in China who completed the Parent-Adolescent Communication Scale, the Epidemiological Studies Depression Scale, and the Smoking Behavior Test. Results showed that parent-adolescent communication had a significant negative effect on adolescent smoking behavior and depression partially mediated the relationship between parent–adolescent communication and adolescent smoking behavior. In addition, gender moderated the relationship between depression and adolescent smoking behavior. Overall, these findings may help to promote better understanding of the relationship between parent–adolescent communication and adolescent smoking behavior.

A Study on Estimation of Internal Pressure Creep Life Using Small Punch Creep (SPC) Tests for Boiler Pipes

2009 ◽  
Author(s):  
Toshimi Kobayashi ◽  
Toru Izaki ◽  
Junichi Kusumoto ◽  
Akihiro Kanaya
Keyword(s):  
Internal Pressure ◽  
Residual Life ◽  
Test Results ◽  
Creep Life ◽  
Creep Tests ◽  
Good Correspondence ◽  
Small Punch ◽  
Uniaxial Creep ◽  
Wide Range ◽  
The Relationship

The small punch creep (SPC) test is possible to predict residual creep life at a high accuracy. But, the results of SPC tests cannot be compared with uniaxial creep or internal pressure creep results directly. In this report, the relationship between SPC test results and uniaxial creep test results in ASME A335 P11 (1.25Cr-0.5Mo Steel) was studied. The obtained relationship between SPC load and equivalent uniaxial creep stress formed a simple linear equation under the wide range of test temperature and test period. Then, the SPC results can be compared with uniaxial results by converting SPC loads to the equivalent uniaxial creep stresses. The relationship between SPC test results and internal pressure creep tests results was also studied. The internal creep life of as-received P11 pipe was almost same as SPC result when the hoop stress was converted to the SPC load. The creep lives of internal pressure creep influenced materials also showed good correspondence with SPC results. Therefore SPC can estimate the residual life of internal pressure creep influenced materials.

Size Effect on Mechanical Properties of LVL

2014 ◽  
Vol 887-888 ◽  
pp. 824-829
Author(s):  
Qing Fang Lv ◽  
Ji Hong Qin ◽  
Ran Zhu
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Size Effect ◽  
Tensile Test ◽  
Compression Test ◽  
Test Results ◽  
Laminated Veneer Lumber ◽  
Object Of Study ◽  
The Relationship

Laminated veneer lumber is taken as an object of study, and use LVL specimens of different sizes for compression test and tensile test. The goal of the experiment is to investigate the size effect on compressive strength and tensile strength as well as the influence of the secondary glued laminated face, which appears in the secondary molding processes. The results show that both compressive strength and tensile strength have the size effect apparently and the existence of the secondary glued laminated face lower the compressive strength of LVL specimens. Afterwards, the relationship between compressive strength and volume along with tensile strength and area are obtained by the test results.

scholarly journals Compressibility behaviour of remoulded, fine-grained soils and correlation with index properties

2000 ◽  
Vol 37 (3) ◽  
pp. 712-722 ◽  
Author(s):  
A Sridharan ◽  
H B Nagaraj
Keyword(s):  
Liquid Limit ◽  
Plasticity Index ◽  
Engineering Properties ◽  
Test Results ◽  
Index Properties ◽  
Initial Water ◽  
Fine Grained ◽  
Wide Range ◽  
The Relationship ◽  
Water Contents

Correlating engineering properties with index properties has assumed greater significance in the recent past in the field of geotechnical engineering. Although attempts have been made in the past to correlate compressibility with various index properties individually, all the properties affecting compressibility behaviour have not been considered together in any single study to examine which index property of the soil correlates best with compressibility behaviour, especially within a set of test results. In the present study, 10 soils covering a sufficiently wide range of liquid limit, plastic limit, and shrinkage limit were selected and conventional consolidation tests were carried out starting with their initial water contents almost equal to their respective liquid limits. The compressibility behaviour is vastly different for pairs of soils having nearly the same liquid limit, but different plasticity characteristics. The relationship between void ratio and consolidation pressure is more closely related to the shrinkage index (shrinkage index = liquid limit - shrinkage limit) than to the plasticity index. Wide variations are seen with the liquid limit. For the soils investigated, the compression index relates better with the shrinkage index than with the plasticity index or liquid limit.Key words: Atterberg limits, classification, clays, compressibility, laboratory tests.

Sign in / Sign up

Export Citation Format

Share Document