scholarly journals Content Determination of Active Component in Huangqi Yinyanghuo Group and Its Effects on hTERT and Bcl-2 Protein in Osteosarcoma

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Ying Tan ◽  
Lei Tan ◽  
Shuai Huang ◽  
Junfan Lu ◽  
Longtan Yu
Keyword(s):  
Cell Survival ◽  
Active Component ◽  
Extraction Process ◽  
Osteosarcoma Cell ◽  
Human Telomerase Reverse Transcriptase ◽  
Logarithmic Growth Phase ◽  
Survival Fraction ◽  
Duration Of Action ◽  
Content Determination

To screen the optimal extraction process and content determination of active component of Huangqi Yinyanghuo group (HYG) and to study the effects of HYG on human telomerase reverse transcriptase (hTERT) and Bcl-2 protein in osteosarcoma (HOS) cells, providing the theoretical basis for clinical application of HYG in treatment of osteosarcoma, orthogonal design table L9(43) was used to design the extraction process of HYG, and icariin was taken as the investigation index to optimize the extraction process of HYG. 0.125, 0.25, 0.5, 1, 2, 4, and 8 μmol/L HYG were taken to act separately on logarithmic growth phase osteosarcoma HOS cells, CCK-8 assay was used to determine cell viability, and immunohistochemical SP assay was used to determine the expression of hTERT and Bcl-2 protein. Apoptosis rate was positively correlated with the dose of HYG, and the expressions of hTERT and Bcl-2 protein were significantly decreased with the prolonged duration of action. Under the effect of HYG, dose was negatively correlated with osteosarcoma cell survival fraction; osteosarcoma cell survival fraction was positively correlated with hTERT and Bcl-2 protein; duration of action was negatively correlated with hTERT and Bcl-2 protein; and hTERT and Bcl-2 protein were in a synchronous relationship.

scholarly journals Study on the Effect of Different Extraction Methods in Four Pharmacopoeia on the Content and Structural Transformation of Ginsenoside and the Optimization of Extraction Process

2021 ◽  
Author(s):  
Kai Sun ◽  
Hua Jiang ◽  
Pingya Li ◽  
Lei Xu ◽  
Yaling Deng ◽  
...  
Keyword(s):  
United States ◽  
Structural Transformation ◽  
Extraction Method ◽  
The United States ◽  
Extraction Process ◽  
Extraction Methods ◽  
Detection Methods ◽  
Content Determination ◽  
Q Exactive

Abstract Background: In recent years, ginseng products are widely used in various fields. More and more people pay attention to the extraction methods and quality evaluation of ginseng. At present, China, the United States, Europe, Japan and Korea have the quality standards and content determination methods of ginseng. However, due to the different treatment methods adopted before the determination of ginseng samples, the content limits of the index components, such as ginsenoside Rb1, Rg1 and Re are also different. There have been literature analyzed the similarities and differences of ginseng content detection methods in pharmacopoeias of different countries, but the comparison of the effects of different methods on ginsenoside content and structural transformation has not been reported.Methods: In this paper, ginsenosides in ginseng were extracted according to four national Pharmacopoeia, and analyzed quantitatively and qualitatively by UPLC-Q-Exactive-MS and HPLC-UV. Finally, a simple and feasible extraction method was optimized by response surface method. Results: Twelve kinds of ginsenosides in ginseng were quantitatively analyzed by using the methods of four national pharmacopoeia. Among them, the contents of Rg1, Re and Rd were high, and they were the highest by using unheated J/KP (Japan/Korea Pharmacopoeia) method. Ten kinds of ginsenosides were determined by heated CP (China Pharmacopoeia), USP (the United States Pharmacopoeia) and EP (European Pharmacopoeia) method, and seven kinds of ginsenosides were determined by unheated J/KP method. In the following UPLC-Q-Exactive-MS study, 34, 36, 21 and 19 ginsenosides were identified by CP, USP, EP and J/KP method, respectively. In the optimization of ginsenoside extraction process, an efficient extraction method was selected from the solvent, extraction time, solid-liquid ratio and other factors. In conclusion, through the qualitative and quantitative comparison of CP, USP and EP samples after heating, it can be seen that ginsenoside heating will increase the content of rare saponins, and the heating time is directly proportional to the content of rare saponins. Conclusion: The pretreatment method has a significant effect on the content determination of ginseng. The analysis of the preparation method and process optimization of the four Pharmacopoeia can provide important reference for the revision of ginseng standard.

Study on Extraction Process and Content Determination of Safflor Yellow

2013 ◽  
Vol 781-784 ◽  
pp. 663-667 ◽  
Author(s):  
Jiang Li Nie ◽  
Cong Shi ◽  
Guo Yan Yan ◽  
Yi Pei
Keyword(s):  
Extraction Process ◽  
Scientific Basis ◽  
Orthogonal Test ◽  
Extraction Rate ◽  
Single Factor ◽  
Content Determination ◽  
Uv Visible ◽  
Herbal Quality ◽  
Optimum Extraction

The aim was to study the extraction process of safflor yellow (SY) from Cacthamus tinctorius. The SY contents of five varieties which were planted in safflower production base in Tianjin were measured and compared, in order to determine its growth adaptability and herbal quality. [Method Based on the single-factor test, the optimum extraction process can be obtained after selecting the lager factor which affected extraction rate of safflor yellow. Then the SY contents of five varieties were determined by UV-visible spectrophotometer. [Result The orthogonal test showed that the optimal extraction process was to add 10 and 12 times amount of water and extract for 30min every time at 60°C, totally for 2 times. The SY contents of five varieties were significantly higher than or equal to the standard medicinal safflor. [Conclusion Five varieties of safflower which were planted in Tianjin showed good adaptability and herbal quality. This study would provide scientific basis for improving saline-alkali soil in Tianjin.

Determination of readiness for laying based on material moisture, corresponding relative humidity, and water release

2020 ◽  
Vol 62 (10) ◽  
pp. 1033-1040
Author(s):  
Christoph Strangfeld ◽  
Sabine Kruschwitz
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Embedded Sensors ◽  
Residual Water ◽  
Floor Covering ◽  
Water Release ◽  
Content Determination ◽  
Two Samples ◽  
Moisture Content Determination

Abstract The moisture content of the subfloor has to be determined before installation to avoid damage to the floor covering. Only if readiness for layering is reached, can an installation without damage be expected in all cases. In general, three approaches exist to measure residual water content: determination of moisture content, determination of water release, or determination of the corresponding relative humidity. All three approaches are tested under laboratory conditions at eight screed types including two samples thicknesses in each case. Moisture content and water release are measured by sample weighing, the corresponding relative humidity is measured by embedded sensors. All three approaches are compared and correlated. The evaluations show only a weak correlation and, in several cases, contradicting results. Samples are considered ready for layering and not ready for layering at the same time, depending on the chosen approach. Due to these contradicting results, a general threshold for a risk of damage cannot be derived based on these measurements. Furthermore, the experiment demonstrates that the measurement of corresponding relative humidity is independent of the screed type or screed composition considered. This makes humidity measurement a potentially very promising approach for the installation of material moisture monitoring systems.

scholarly journals Quantitative Determination of Azithromycin in Human Plasma by Liquid Chromatography–Mass Spectrometry and its Application in Pharmackokinetic Study

2012 ◽  
Vol 11 (1) ◽  
pp. 55-63 ◽  
Author(s):  
Maizbha Uddin Ahmed ◽  
Mohammad Safiqul Islam ◽  
Tasmin Ara Sultana ◽  
AGM Mostofa ◽  
Muhammad Shahdaat Bin Sayeed ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Solid Phase ◽  
Internal Standard ◽  
Extraction Process ◽  
Serum Samples ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Linear Concentration Range ◽  
Linear Concentration

Azithromycin is an effective and well-known antimicrobial agent. In the present study, a simple, sensitive and specific LC/MS/MS method has been developed and validated for the quantification of Azithromycin in  human serum samples using Clarithromycin as internal standard. Azithromycin was extracted from biological matrix  by using solid phase extraction process. The chromatographic separation was performed on Luna C18 (3 ?, 2x150   mm) column with a mobile phase consisting of 35 mM ammonium acetate buffer (mobile phase-A) and acetonitrile  and methanol in ratio of 90:10 ( as mobile phase-B) at a flow rate of 0.25 mL/min. The method was validated over a  linear concentration range of 0.5?50.0 ng/mL and limit of quantification (LOQ) was 0.5 ng/mL with a coefficient of  correlation (r2) = 0.9998. The intra-day and inter-day precision expressed as relative standard deviation were 1.64% – 8.43% and 2.32% – 9.92%, respectively. The average recovery of azithromycin from serum was 98.11%. The method  was successfully applied to a pharmacokinetic study after oral administration of Azithromycin 200 mg/5 ml suspension in healthy Bangladeshi volunteers. DOI: http://dx.doi.org/10.3329/dujps.v11i1.12488 Dhaka Univ. J. Pharm. Sci. 11(1): 55-63, 2012 (June)

scholarly journals Red-lesion extraction in retinal fundus images by directional intensity changes’ analysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Maryam Monemian ◽  
Hossein Rabbani
Keyword(s):  
Sensitivity And Specificity ◽  
Retinal Disease ◽  
Extraction Process ◽  
Efficient Performance ◽  
Intensity Changes ◽  
Significant Intensity ◽  
Almost All ◽  
Retinal Fundus ◽  
Distinguishing Features

AbstractDiabetic retinopathy (DR) is an important retinal disease threatening people with the long diabetic history. Blood leakage in retina leads to the formation of red lesions in retina the analysis of which is helpful in the determination of severity of disease. In this paper, a novel red-lesion extraction method is proposed. The new method firstly determines the boundary pixels of blood vessel and red lesions. Then, it determines the distinguishing features of boundary pixels of red-lesions to discriminate them from other boundary pixels. The main point utilized here is that a red lesion can be observed as significant intensity changes in almost all directions in the fundus image. This can be feasible through considering special neighborhood windows around the extracted boundary pixels. The performance of the proposed method has been evaluated for three different datasets including Diaretdb0, Diaretdb1 and Kaggle datasets. It is shown that the method is capable of providing the values of 0.87 and 0.88 for sensitivity and specificity of Diaretdb1, 0.89 and 0.9 for sensitivity and specificity of Diaretdb0, 0.82 and 0.9 for sensitivity and specificity of Kaggle. Also, the proposed method has a time-efficient performance in the red-lesion extraction process.

scholarly journals The Ionic Associate of Metamizole as an Electrode-Active Component of a PVC Plasticized Membrane Electrode

Chemosensors ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 17
Author(s):  
Sarizhat D. Tataeva ◽  
Kurban E. Magomedov ◽  
Ruslan Z. Zeynalov ◽  
Naida D. Baygishieva ◽  
Viktorya S. Magomedova ◽  
...  
Keyword(s):  
Active Component ◽  
Limit Of Detection ◽  
Membrane Electrode ◽  
Ionic Associate ◽  
Selective Electrode ◽  
Coefficients Of Variation ◽  
Ion Associate ◽  
Phase Functions ◽  
Good Agreement

The technology for manufacturing a film membrane of the metamizole-selective electrode containing ion associate metamizole-octadecylammonium ODAH+MT− as an electrode active component (EAC) has been proposed. The main potentiometric characteristics of the metamizole-selective electrode have been determined. The expediency of the proposed design of the metamizole selective electrode for the determination of metamizole in dosage forms has been substantiated. The best composition of the membrane (wt.%) of the metamizole-selective electrode has corresponded to: ODAH+MT−—5.3; 2-nitrophenyloctylether—63.1; poly(vinyl chloride)—31.6. Electrode-active component in the membrane phase functions as an ion associate ODAH+MT−. Potentiometric characteristics of metamizole-selective electrode have been determined, which corresponded to: linear range 1 × 10−2–1 × 10−4 with limit of detection 4.58 × 10−5 M, electrode function slope −48.5 mV/dec., working interval pH 4.5–7.3, response time 60 s. The potentiometric coefficients of selectivity of the metamizole-selective electrode with respect to various ions have been determined. The possibility of determining metamizole in a medicinal product has been tested. The results of the analyses show good agreement between the two methods (relative error less than 7.0%) with coefficients of variation less than 5% for MT-SE and iodometric methods.

scholarly journals Classification of brown earths based on field and laboratory properties: Problematic issues and proposition of their solution

2019 ◽  
Vol 52 (2) ◽  
pp. 225
Author(s):  
Karolina Woźnica ◽  
Agnieszka Józefowska ◽  
Justyna Sokołowska ◽  
Ryszard Mazurek ◽  
Tomasz Zaleski
Keyword(s):  
Calcium Carbonate ◽  
Main Parameter ◽  
Ph Value ◽  
Soil Classification ◽  
Base Saturation ◽  
Carbonate Content ◽  
Field Guide ◽  
Content Determination

<p class="Default">In this paper, the current problems associated with the classification of brown earths, are presented. According to the Polish Soil Classification (PSC) (1989, 2011), base saturation is the main parameter for identifying eutrophic and dystrophic brown soils. In practice, however, it is not possible to determine the base saturation value in the field. Therefore, the aim of this study was to estimate the base saturation using a regression equation and create a field guide for brown earths, based on the pH value, measured using a Hellige indicator, and the calcium carbonate content. Determination of the pH ranges enabled the classification of brown earth types in the field. These results suggest that pH can be used as a proxy for base saturation especially in the field. A change in the hierarchy of soil (sub)types is proposed for the new Polish Soil Classification.</p>

Sign in / Sign up

Export Citation Format

Share Document