scholarly journals Brilliant Green and Acid Orange 74 Dyes Removal from Water by Pinus roxburghii Leaves in Naturally Benign Way: An Application of Green Chemistry

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Rabia Rehman ◽  
Sara Jan Muhammad ◽  
Muhammad Arshad
Keyword(s):  
Brilliant Green ◽  
Low Cost ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Pinus Roxburghii ◽  
Acid Orange ◽  
Pseudo Second Order ◽  
Optimized Conditions ◽  
Adsorbent Dose ◽  
Dyes Removal

The purpose of this study was to use low cost and easily accessible biosorbent for batch-scale elimination of brilliant green and acid orange 74 dyes from aqueous solution. Pinus roxburghii leaves were utilized to study their dye-eliminating capacities. The adsorbent was characterized by FTIR, TGA, DTA, and SEM. The optimized conditions for brilliant green and acid orange 74 dye elimination were adsorbent dose, 1.2 and 1.8 g; contact time, 30 and 45 min; pH, 2 and 1; temperature, 50°C and 60°C; and agitation speed, 125 rpm and 50 rpm for BG and AO-74, respectively. Adsorption records well fitted Langmuir isotherm. Possibility of the procedure was shown by negative values of the thermodynamic parameter ∆G° for both dyes. Kinetic studies showed that adsorption of BG and AO-74 dyes from watery solution by PR leaves followed pseudo-second-order kinetics.

Sorption of Acid Blue 9 on to Wheat Bran: Optimization, Equilibrium and Kinetic Studies

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Rajeshkannan Rajan ◽  
Manivasagan Rajasimman ◽  
Rajamohan Natarajan
Keyword(s):  
Wheat Bran ◽  
Contact Time ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Initial Substrate ◽  
Pseudo Second Order ◽  
Langmuir And Freundlich Equations ◽  
Acid Blue ◽  
Adsorbent Dose

In this study, the use of wheat bran as a possible adsorbent has been successfully demonstrated in the removal of Acid blue9 (AB9) from aqueous solution. The effect of different parameters such as temperature, adsorbent dose, contact time, adsorbent size and agitation speed were investigated. The optimum conditions obtained from response surface methodology are: temperature-38.1°C, adsorbent dose (3.1g/L), contact time (206 min), adsorbent size 0.1mm (150mesh), and agitation speed (222rpm). The effect of pH and initial substrate concentration were studied. The pseudo-first order and pseudo-second order kinetics were tested. The sorption equilibrium, expressed by the Langmuir and Freundlich equations, indicated that the process was in compliance with Freundlich isotherm.

scholarly journals Removal of brilliant green (BG) from aqueous solution by using low cost biomass Salix alba leaves (SAL): thermodynamic and kinetic studies

2020 ◽  
Vol 10 (1) ◽  
pp. 70-81
Author(s):  
Rashida Fiaz ◽  
Muhammad Hafeez ◽  
Rashid Mahmood
Keyword(s):  
Aqueous Solution ◽  
Brilliant Green ◽  
Low Cost ◽  
Kinetic Studies ◽  
Sorption Process ◽  
Salix Alba ◽  
Batch Studies ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Maximum Removal

Abstract The removal of brilliant green dye (BGD) from aqueous solution by using Salix alba leaves (SAL) was carried out via batch studies. The maximum removal efficiency was found to be 95.2% with initial dye concentration 50 mg/L at 0.15 g adsorbent dosage, pH = 6, and 298 K temperature, and the equilibrium was observed within 3½ hours. The adsorption capacity increased (2.21–15.89 mg/g) from 10 to 50 mg/L of dye concentration. Kinetic and isotherm studies were also carried out. The results showed that pseudo-second order model better describes the adsorption mechanism. The isotherm equilibrium data analysis was carried out by using Freundlich and Langmuir models and the sorption process was observed to conform with the Langmuir isotherm with linear correlation coefficient (R2 = 0.99). The thermodynamic properties ΔG°, ΔH°, and ΔS° delineated that BGD adsorption over SAL was feasible, spontaneous, and endothermic between 303 and 323 K temperature.

scholarly journals Adsorption of Cationic and Anionic Dyes from Aqueous Solution Using Sunflower Husk

2021 ◽  
Vol 15 (4) ◽  
pp. 567-574
Author(s):  
Huda A. Jaber ◽  
◽  
Marwa F. Abdul Jabbar ◽  
Keyword(s):  
Methyl Orange ◽  
Contact Time ◽  
Brilliant Green ◽  
Kinetic Studies ◽  
Anionic Dyes ◽  
Time Intervals ◽  
Ph Values ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Adsorbent Dose

The current study deals with the removal of cationic dye (brilliant green) and anionic dye (methyl orange) from wastewater by using sunflower husk as an adsorbent. The operation takes place batch wise by applying several concentrations of the dye solution with various adsorbent amounts, at a range of initial PH values and particle sizes at varying contact time intervals. The percent of dye removed for two dyes increased with increasing time and adsorbent dose and decreased with increasing the dye concentration and particle size. The equilibrium time differed according to conditions used. The optimum removal for brilliant green dye was 98 %, which was achieved at 50 ppm dye concentration, 2 g\l adsorbent dose, 75 µm particles size and pH 7 at contact time of 1 h, compared with low removal for methyl orange that reached 54 % under optimum conditions (dye concentration 10 ppm, adsorbent dose 4 g/l, pH 3 at the same particles size and time). Kinetic studies were conducted and revealed that the adsorption was well defined by pseudo-second order model and could be described by the Langmuir isotherm.

scholarly journals Modified Cenospheres as an Adsorbent for the Removal of Disperse Dyes

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Markandeya Tiwari ◽  
S. P. Shukla ◽  
D. Mohan ◽  
D. S. Bhargava ◽  
G. C. Kisku
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Agitation Speed ◽  
Disperse Dyes ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbate Concentration ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorbent Dose

The main objective of this investigation was to use modified cenospheres for the removal of disperse blue 79:1 (DB) and disperse orange 25 (DO) dyes from aqueous solution by batch adsorption process under different conditions (pH, adsorbent dose, adsorbate concentration, agitation speed, contact time, and temperature). Modified cenosphere was capable of removing up to 78% of DB and 81% of DO dyes from aqueous solutions of 40 mg/L dyes concentration. The investigated data was explained by the Langmuir isotherm. The experimental data were found to follow the pseudo-second-order kinetic model. The results of this study suggested that modified cenospheres could be used as a low-cost alternative to expensive adsorbents like activated carbon in wastewater treatment for the removal of disperse dyes.

scholarly journals Isothermal and Kinetic Investigation of Exploring the Potential of Citric Acid-Treated Trapa natans and Citrullus lanatus Peels for Biosorptive Removal of Brilliant Green Dye from Water

2021 ◽  
Vol 2021 ◽  
pp. 1-23
Author(s):  
Muhammad Sadiq Hussain ◽  
Rabia Rehman ◽  
Muhammad Imran
Keyword(s):  
Citric Acid ◽  
Contact Time ◽  
Brilliant Green ◽  
Citrullus Lanatus ◽  
Agitation Speed ◽  
Trapa Natans ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Bulk Scale ◽  
Adsorbent Dose

Trapa natans peels (TNPs) and Citrullus lanatus peels (CLPs) were utilized for the biosorptive removal of brilliant green dye (BGD), after modifying with citric acid. Characterization and surface morphology were studied by Fourier transform infrared spectroscopy and scanning electron microscopy. For the removal of BGD by citric acid-treated Trapa natans peels (CA-TNPs), the optimum conditions were obtained with adsorbent dose 0.8 g, contact time 25 minutes, initial pH 5, temperature 30°C, and agitation speed 100 rpm, while for the citric acid-treated Citrullus lanatus peels (CA-CLPs), adsorbent dose 0.8 g, contact time 20 minutes, pH 5, temperature 30°C, and agitation speed 100 rpm gave optimum results. The qmax values obtained were 108.6, 128, 144.9, and 188.68 mg/g for R-TNP, CA-TNP, R-CLP, and CA-CLP, respectively, while the correlation coefficient (R2) values obtained were 0.985, 0.986, 0.985, and 0.998 for R-TNP, CA-TNP, R-CLP, and CA-CLP, respectively. These favor the Langmuir isotherm and pseudo-second-order kinetics, with negative (ΔG0) values of all adsorbents, determining that the adsorption phenomenon is exothermic and spontaneous in nature. Both citric acid-treated peels of Trapa natans and Citrullus lanatus were found suitable for bulk-scale eradication of hazardous, toxic, and carcinogenic basic cationic dyes.

Preparation of cationic waste paper and its application in poisonous dye removal

2013 ◽  
Vol 67 (11) ◽  
pp. 2560-2567 ◽  
Author(s):  
Fan Yang ◽  
Xiaojie Song ◽  
Lifeng Yan
Keyword(s):  
Low Cost ◽  
Aqueous Suspension ◽  
Order Kinetic ◽  
Acid Orange 7 ◽  
Anionic Dyes ◽  
Experimental Conditions ◽  
Adsorption Models ◽  
Acid Orange ◽  
Initial Ph ◽  
Pseudo Second Order

Cationic paper was prepared by reaction of paper with 2,3-epoxypropyltrimethylammonium chloride in aqueous suspension, and tested as low-cost adsorbent for wastewater treatment. The experimental results revealed that anionic dyes (Acid Orange 7, Acid Red 18, and Acid Blue 92) were adsorbed on the cationic paper nicely. The maximum amount of dye Acid Orange 7 adsorbed on cationic paper was 337.2 mg/g in experimental conditions. The effects of initial dye concentration, temperature, and initial pH of dye solution on adsorption capacity of cationic paper were studied. The pseudo-first-order and pseudo-second-order kinetic models were applied to describe the kinetic data. The Freundlich and Langmuir adsorption models were used to describe adsorption equilibrium. The thermodynamic data indicated that the adsorption process of dye on cationic paper occurred spontaneously.

Removal of Methylene Blue Dye by Using Eggshell Powder

2013 ◽  
Vol 65 (1) ◽  
Author(s):  
Norzita Ngadi ◽  
Chin Chiek Ee ◽  
Nor Aida Yusoff
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Low Cost ◽  
Kinetic Studies ◽  
Operating Conditions ◽  
Blue Dye ◽  
Dye Wastewater ◽  
Order Model ◽  
Aquatic Life ◽  
Pseudo Second Order

Dyes contain carcinogenic materials which can cause serious hazards to aquatic life and the users of water. Textile industry is the main source of dye wastewater which results in environmental pollution. Many studies have been conducted to investigate the use of low cost adsorbent as an alternative technique for the adsorption of dye. The objective of this study is to determine the potential of eggshell powder as an adsorbent for methylene blue removal and find out the best operating conditions for the color adsorption at laboratory scale. The adsorption of cationic methylene blue from aqueous solution onto the eggshell powder was carried out by varying the operating parameters which were contact time, pH, dosage of eggshell powder and temperature in order to study their effect in adsorption capacity of eggshell powder. The results obtained showed that the best operating condition for removal of methylene blue was at pH 10 (78.98 %) and temperature 50°C (47.37 %) by using 2 g of eggshell powder (57.03 %) with 30 minutes equilibrium time (41.36 %). The kinetic studies indicated that pseudo-second-order model best described the adsorption process.

scholarly journals An alternative low-cost adsorbent for gold recovery from cyanide-leached liquors: Adsorption isotherm and kinetic studies

2018 ◽  
Vol 37 (1-2) ◽  
pp. 3-23 ◽  
Author(s):  
Refiloe Tsolele ◽  
Fanyana Moses Mtunzi ◽  
Michael John Klink ◽  
Vusumzi Emmanuel Pakade
Keyword(s):  
Activated Carbons ◽  
Selective Adsorption ◽  
Low Cost ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Gold Recovery ◽  
Attractive Alternative ◽  
Solution Ph ◽  
Initial Concentration ◽  
Modified Activated Carbons

Pristine Macadamia nutshell-based activated carbons were chemically oxidized with different concentrations of H3PO4 and HNO3 to increase their surface adsorption properties and further explore if they could be an attractive alternative low-cost adsorbent for gold recovery from cyanide-leached liquors. The modified activated carbons were labeled MACN20, MACN40 and MACN55 to signify the materials prepared from 20%, 40% and 55% (v/v) HNO3, respectively. Similar nomenclature was followed for H3PO4-modified activated carbons. Brunauer-Emmet-Teller, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, elemental analysis and X-ray diffraction spectroscopy were used to characterize the prepared activated carbons. The physical properties were attained through determining attrition, ash content, volatile matter and moisture content of all the activated carbons. Various parameters that affect selective adsorption such as the effect of initial concentration, time, agitation speed, interfering species and the dose of the adsorbent were investigated. Optimal parameters for gold ion adsorption were as follows: solution pH, 10; contact time, 6 h; agitation speed, 150 r/min; sorbent amount, 4 g and initial concentration, 5.5 mg/L. The observed selectivity order was not the same for all the adsorbents, but the adsorption of gold was found to be mostly influenced in the presence of nickel and least influenced by copper. MACN55 was found to be the most efficient adsorbent with 74% of gold adsorption from a real-world sample and displayed a similar performance to coconut-based activated carbons.

scholarly journals Enhanced Biosorption of Pb(II) Ions from Aqueous Solutions onto Citric Acid Treated Aspergillus niger Biomass: Equilibrium and Kinetic Studies

2020 ◽  
Vol 32 (3) ◽  
pp. 508-514
Author(s):  
Vinay Kumar Chintalapudi ◽  
Ramya Krishna S.L. Kanamarlapudi ◽  
Useni Reddy Mallu ◽  
Sudhamani Muddada
Keyword(s):  
Citric Acid ◽  
Aspergillus Niger ◽  
Kinetic Studies ◽  
Order Kinetic ◽  
Ftir Analysis ◽  
Structural Variations ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Optimized Conditions ◽  
Biosorption Kinetics

In the present study, initially Aspergillus niger was tested for biosorption of Pb(II) ions and then studied the effect of pretreatment for enhanced biosorption. It was found that the maximum biosorption potential was achieved with citric acid treatment (70.56 %) in comparison with the biomass without treatment (65.46 %) at a biosorbent dose of 20 mg/L, pH 4, 100 rpm, 37 ºC for 8 h. The optimized conditions for treated Aspergillus niger were determined by optimizing the biosorption parameters such as pH, temperature, biomass dose, incubation time and agitation speed. This study indicates that the citric acid treated Aspergillus niger is an effective biosorbent for removal of lead (II) at optimized conditions with the maximum biosorption potential of 83.6 % as compared to previous reported work. SEM-EDX and FTIR analysis showed the structural variations and the functional groups involved in lead biosorption, respectively. Biosorption kinetics showed that pseudo second order kinetic model as the better fit.

scholarly journals Hen feather a bio-waste material for adsorptive removal of methyl red dye from aqueous solutions

2021 ◽  
Author(s):  
Samina Zaman ◽  
Md. Nayeem Mehrab ◽  
Md. Shahnul Islam ◽  
Gopal Chandra Ghosh ◽  
Tapos Kumar Chakraborty
Keyword(s):  
Aqueous Solutions ◽  
Contact Time ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Methyl Red ◽  
Experimental Conditions ◽  
Potential Applicability ◽  
Pseudo Second Order ◽  
Red Dye ◽  
Adsorbent Dose

Abstract This study investigates the potential applicability of hen feather (HF) to remove methyl red (MR) dye from aqueous solution with the variation of experimental conditions: contact time (1–180 min), pH (4–8), initial dye concentration (5–50 mg/L) and adsorbent dose (3–25 g/L). Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) evaluate the surface morphology and chemistry of HF, respectively. The maximum removal of MR by HF was 92% when the optimum conditions were initial MR dye concentration 05 mg/L, pH 4.0, adsorbent dose 07.0 g/L and 90.0 min equilibrium contact time. Langmuir isotherm (R2 = 0.98) was more suited than Freundlich isotherm (R2 = 0.96) for experimental data, and the highest monolayer adsorption capacity was 6.02 mg/g. The kinetics adsorption data fitted well to pseudo-second-order model (R2 = 0.999) and more than one process were involved during the adsorption mechanism but film diffusion was the potential rate-controlling step. The findings of the study show that HF is a very effective and low-cost adsorbent for removing MR dye from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document