scholarly journals Nonirritant and Cytocompatible Tinospora cordifolia Nanoparticles for Topical Antioxidant Treatments

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Jeimmy González-Masís ◽  
Jorge M. Cubero-Sesin ◽  
Yendry Regina Corrales-Ureña ◽  
Sara González-Camacho ◽  
Nohelia Mora-Ugalde ◽  
...  
Keyword(s):  
Cell Viability ◽  
Therapeutic Agent ◽  
Culture Media ◽  
Animal Health ◽  
Average Particle Size ◽  
Fibroblast Cell ◽  
Tinospora Cordifolia ◽  
Average Particle ◽  
Nanoparticle Formulation ◽  
Intermediate Concentration

Tinospora cordifolia extract contains antioxidants such as polyphenols, and thus, it has been used as a natural phytochemical antioxidant therapeutic agent. Many of these compounds are insoluble or only partially soluble in water. In this study, we produced a novel aqueous nanoparticle formulation, with an average particle size of 182.9 ± 3.8 nm, to improve the dispersion of the bioactive compounds in water and to increment its bioavailability. The nanoparticles are composed of polyphenols, alkaloids, and glycosides. We studied the effect of this nanoparticle formulation on mouse 3T3 fibroblast cell viability and New Zealand rabbit dermal irritability tests. Concentrations of 2.5, 25, and 250 µg/mL resulted in similar cell viability to cells in culture media. An intermediate concentration of 12.45 mg/ml was used for the acute dermal irritability test. There were no severe alterations that compromised animal health. These results represent a precedent for application of such nanoparticles derived from plant stems, such as Tinospora cordifolia, in biomedicine and in antiaging cosmetic treatments.

scholarly journals Synthesis, Characterization of Nano-β-Tricalcium Phosphate and the Inhibition on Hepatocellular Carcinoma Cells

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Langlang Liu ◽  
Yanzeng Wu ◽  
Chao Xu ◽  
Suchun Yu ◽  
Xiaopei Wu ◽  
...  
Keyword(s):  
Hepatocellular Carcinoma ◽  
Particle Size ◽  
Cell Viability ◽  
Tricalcium Phosphate ◽  
Hepg2 Cells ◽  
Drug Carrier ◽  
Average Particle Size ◽  
Crystal Habit ◽  
Average Particle ◽  
Dependent Manner

It is difficult to synthesize nano-β-tricalcium phosphate (nano-β-TCP) owing to special crystal habit. The aim of this work was to synthesize nano-β-TCP using ethanol-water system and characterize it by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Malvern laser particle size analyzer, and transmission electron microscope (TEM). In addition, the inhibitory effect of nano-β-TCP on human hepatocellular carcinoma (HepG2) cells was also investigated using MTT assay, lactate dehydrogenase (LDH) leakage test, and 4′-6-diamidino-2-phenylindole (DAPI) staining. The results showed that negatively charged rod-like nano-β-TCP with about 55 nm in diameter and 120 nm in length was synthesized, and the average particle size of nano-β-TCP was 72.7 nm. The cell viability revealed that nano-β-TCP caused reduced cell viability of HepG2 cells in a time- and dose-dependent manner. These findings presented here may provide valuable reference data to guide the design of nano-β-TCP-based anticancer drug carrier and therapeutic systems in the future.

scholarly journals Anticancer Activity of Ferulic Acid-Inorganic Nanohybrids Synthesized via Two Different Hybridization Routes, Reconstruction and Exfoliation-Reassembly

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Hyoung-Jun Kim ◽  
Kitae Ryu ◽  
Joo-Hee Kang ◽  
Ae-Jin Choi ◽  
Tae-il Kim ◽  
...  
Keyword(s):  
Particle Size ◽  
Ferulic Acid ◽  
Anticancer Activity ◽  
Layered Double Hydroxide ◽  
Culture Media ◽  
Average Particle Size ◽  
Average Particle ◽  
Cellular Delivery ◽  
Double Hydroxide

We have successfully prepared nanohybrids of biofunctional ferulic acid and layered double hydroxide nanomaterials through reconstruction and exfoliation-reassembly routes. From X-ray diffraction and infrared spectroscopy, both nanohybrids were determined to incorporate ferulic acid molecules in anionic form. Micrsocopic results showed that the nanohybrids had average particle size of 150 nm with plate-like morphology. As the two nanohybridization routes involved crystal disorder and random stacking of layers, the nanohybrids showed slight alteration inz-axis crystallinity and particle size. The zeta potential values of pristine and nanohybrids in deionized water were determined to be positive, while those in cell culture media shifted to negative values. According to thein vitroanticancer activity test on human cervical cancer HeLa cells, it was revealed that nanohybrids showed twice anticancer activity compared with ferulic acid itself. Therefore we could conclude that the nanohybrids of ferulic acid and layered double hydroxide had cellular delivery property of intercalated molecules on cancer cell lines.

scholarly journals Safety profile, antimicrobial and antibiofilm activities of a nanostructured lipid carrier containing oil and butter from Astrocaryum vulgare: in vitro studies

2021 ◽  
Vol 9 (5) ◽  
pp. 478-497
Author(s):  
Aline Rossato ◽  
Larissa da Silva Silveira ◽  
Pâmella Scharamm Oliveira ◽  
Thobias Toniolo de Souza ◽  
Ana Paula Becker ◽  
...  
Keyword(s):  
Cell Viability ◽  
Bacterial Infections ◽  
Average Particle Size ◽  
Aqueous Solubility ◽  
Human Erythrocytes ◽  
Antibiofilm Activity ◽  
Average Particle ◽  
Nanostructured Lipid Carrier ◽  
Cytotoxicity Studies

Ethnopharmacological relevance: Tucumã (Astrocaryum vulgare)is a fruit native to the Amazon region. Extracts from the peel and pulp are thought of as promising treatments for bacterial infections. The primary constituents of Tucumã oil and butter possess unsaturated carbon chains that are susceptible to oxidation by light or heat. The oils have high volatility and low aqueous solubility that limits their use without a vehicle. Nanotechnology refers to techniques to solve these problems. Nanostructured lipid carriers (NLC), for example, protect fixed oils degradation by heat or light, as well as from oxidation and evaporation, ensuring greater stability and function, thereby prolonging the useful life of the final product. Study objectives: The objective of this study was to evaluate the hemolytic, cytotoxic, antimicrobial and antibiofilm properties of an NLC containing Tucumã butter and oil soasto improve the solubility and photosensitivity of the compounds, generating better pharmacological efficacy. Materials and methods: The NLC was assessed for stability for 60 days. The cytotoxicity of nanoparticles in peripheral blood mononucleated cells was determined in culture using assays for cell viability, DNA damage, oxidative metabolism and damage to human erythrocytes. Antimicrobial activity was determined using the broth microdilution technique and antibiofilm activity according to standardized protocols. Results: The Tucumã NLC remained stable throughout the evaluated period, with pH between 5.22–5.35, monodisperse distribution (PDI<0.3) and average particle size of 170.7 ± 3nm. Cytotoxicity studies revealed that the NLC is safe and modulates inflammatory processes, demonstrated by increased cell viability and nitric oxide levels. There was low hemolytic activity of the NLC against human erythrocytes almost concentrations tested. Conclusion: Taken together, the data suggest that NLC containing Tucumã oil and butter showed antimicrobial and antibiofilm activity against organisms that cause morbidity and mortality in humans. They may be alternative solutions to public health problems related to bacterial infections.

scholarly journals Karakterisasi Nanopartikel Ekstrak Bunga Kecombrang dengan Penambahan Poloksamer

2018 ◽  
Vol 1 (3) ◽  
pp. 121-124
Author(s):  
Tresna Lestari ◽  
Tita Nofianti ◽  
Lilis Tuslinah ◽  
Ruswanto Ruswanto ◽  
Firda Adityas
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Average Particle Size ◽  
Particle Morphology ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Average Particle ◽  
Flower Extract ◽  
Round Form ◽  
Nanoparticle Formulation

Bunga kecombrang diketahui memiliki aktivitas sebagai antioksidan. Teknologi formulasi nanopartikel diharapkan dapat meningkatkan aktivitas biologis dari ekstrak.Penelitian ini dilakukan untuk memperoleh nanopartikel dari ekstrak bunga kecombrang dengan karakteristik yang baik.Pembuatan nanopartikel dilakukan dengan penambahan poloksamer dengan variasi konsentrasi 1, 3 dan 5%. Formulasi selanjutnya dianalisis meliputi ukuran partikel rata-rata, indeks polidispersitas, potensial zeta, efisiensi penjeratan dan morfologi partikel menggunakan SEM.Hasil karakterisasi diperoleh ukuran partikel rata-rata ketiga formula berada dalam rentang 134,7-193,1 nm, indeks polidispersitas <0,5 untuk semua formula, nilai potensial zeta antara -41,0 - (-24,3) mV dan efisiensi penjeratan terhadap senyawa flavonoid 89,93-97,99 %. Berdasarkan hasil SEM nanopartikel diketahui berbentuk bulat dengan permukaan yang halus.Berdasarkan hasil penelitian disimpulkan bahwa nanopartikel ekstrak bunga kecombrang dengan penambahan poloksamer 1, 3 dan 5% memiliki karakteristik yang baik dan memenuhi syarat sebagai sediaan nanopartikel.   Kecombrang flowers are known to have antioxidant activity. Nanoparticle formulation technology is expected to increase the biological activity of the extract. This study was conducted to obtain the nanoparticles from kecombrang flower extract with good characteristics. The preparation of nanoparticles was carried out by adding poloxamer with various concentrations of 1, 3 and 5%.Furthermore, the formula were analyzed, including the average particle size, polydispersity index, zeta potential, entrapment efficiency and particle morphology using SEM. The results of the characterization obtained an average particle size of the three formulas in the range of 134.7-193.1 nm, polydispersity index <0 , 5 for all formulas, zeta potential values ​​in range of -41.0 - (-24.3) mV and entrapment efficiency of flavonoid compounds of 89.93-97.99%The results of SEM examination showed that nanoparticles  was in round form with a smooth surface. Based on the results of the study,  itcan be concluded that kecombrang flower extract nanoparticles with the addition of poloxamer 1, 3 and 5% had good characteristics and met the criteria of  nanoparticle

Enhanced catalytic activity of low-Pt content nanocatalysts supported on hollow carbon spheres for the ORR in alkaline media

MRS Advances ◽  
2020 ◽  
Vol 5 (57-58) ◽  
pp. 2961-2972
Author(s):  
P.C. Meléndez-González ◽  
E. Garza-Duran ◽  
J.C. Martínez-Loyola ◽  
P. Quintana-Owen ◽  
I.L. Alonso-Lemus ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Anion Exchange ◽  
Average Particle Size ◽  
Synthesis Method ◽  
Alkaline Media ◽  
High Catalytic Activity ◽  
Average Particle ◽  
Carbon Spheres ◽  
Hollow Carbon ◽  
Hollow Carbon Spheres

In this work, low-Pt content nanocatalysts (≈ 5 wt. %) supported on Hollow Carbon Spheres (HCS) were synthesized by two routes: i) colloidal conventional polyol, and ii) surfactant-free Bromide Anion Exchange (BAE). The nanocatalysts were labelled as Pt/HCS-P and Pt/HCS-B for polyol and BAE, respectively. The physicochemical characterization of the nanocatalysts showed that by following both methods, a good control of chemical composition was achieved, obtaining in addition well dispersed nanoparticles of less than 3 nm TEM average particle size (d) on the HCS. Pt/HCS-B contained more Pt0 species than Pt/HCS-P, an effect of the synthesis method. In addition, the structure of the HCS remains more ordered after BAE synthesis, compared to polyol. Regarding the catalytic activity for the Oxygen Reduction Reaction (ORR) in 0.5 M KOH, Pt/HCS-P and Pt/HCS-B showed a similar performance in terms of current density (j) at 0.9 V vs. RHE than the benchmark commercial 20 wt. % Pt/C. However, Pt/HCS-P and Pt/HCS-B demonstrated a 6 and 5-fold increase in mass catalytic activity compared to Pt/C, respectively. A positive effect of the high specific surface area of the HCS and its interactions with metal nanoparticles and electrolyte, which promoted the mass transfer, increased the performance of Pt/HCS-P and Pt/HCS-B. The high catalytic activity showed by Pt/HCS-B and Pt/HCS-P for the ORR, even with a low-Pt content, make them promising cathode nanocatalysts for Anion Exchange Membrane Fuel Cells (AEMFC).

A New Method for Direct Determination of the Recoilless Fraction with Application to Magnetic Nanoparticles

2002 ◽  
Vol 721 ◽  
Author(s):  
Monica Sorescu
Keyword(s):  
Room Temperature ◽  
Average Particle Size ◽  
Direct Determination ◽  
Average Particle ◽  
Lattice Method ◽  
Recoilless Fraction ◽  
Single Room ◽  
Magnetite Particles ◽  
Physical Mixtures

AbstractWe propose a two-lattice method for direct determination of the recoilless fraction using a single room-temperature transmission Mössbauer measurement. The method is first demonstrated for the case of iron and metallic glass two-foil system and is next generalized for the case of physical mixtures of two powders. We further apply this method to determine the recoilless fraction of hematite and magnetite particles. Finally, we provide direct measurement of the recoilless fraction in nanohematite and nanomagnetite with an average particle size of 19 nm.

Determination of grinding parameters of fenugreek seed

1970 ◽  
Vol 26 (1) ◽  
pp. 16 ◽  
Author(s):  
S Balasubramanian ◽  
Rajkumar Rajkumar ◽  
K K Singh
Keyword(s):  
Particle Size ◽  
Energy Consumption ◽  
Moisture Content ◽  
Specific Energy ◽  
Feed Rate ◽  
Average Particle Size ◽  
Specific Energy Consumption ◽  
Average Particle ◽  
Fenugreek Seeds ◽  
Fenugreek Seed

Experiment to identify ambient grinding conditions and energy consumed was conducted for fenugreek. Fenugreek seeds at three moisture content (5.1%, 11.5% and 17.3%, d.b.) were ground using a micro pulverizer hammer mill with different grinding screen openings (0.5, 1.0 and 1.5 mm) and feed rate (8, 16 and 24 kg h-1) at 3000 rpm. Physical properties of fenugreek seeds were also determined. Specific energy consumptions were found to decrease from 204.67 to 23.09 kJ kg-1 for increasing levels of feed rate and grinder screen openings. On the other hand specific energy consumption increased with increasing moisture content. The highest specific energy consumption was recorded for 17.3% moisture content and 8 kg h-1 feed rate with 0.5 mm screen opening. Average particle size decreased from 1.06 to 0.39 mm with increase of moisture content and grinder screen opening. It has been observed that the average particle size was minimum at 0.5 mm screen opening and 8 kg h-1 feed rate at lower moisture content. Bond’s work index and Kick’s constant were found to increase from 8.97 to 950.92 kWh kg-1 and 0.932 to 78.851 kWh kg-1 with the increase of moisture content, feed rate and grinder screen opening, respectively. Size reduction ratio and grinding effectiveness of fenugreek seed were found to decrease from 4.11 to 1.61 and 0.0118 to 0.0018 with the increase of moisture content, feed rate and grinder screen opening, respectively. The loose and compact bulk densities varied from 219.2 to 719.4 kg m-3 and 137.3 to 736.2 kg m-3, respectively.  

Influence of temperature and humidity on the angle of repose of wood bulk materials

2016 ◽  
Author(s):  
И.В. Бачериков ◽  
Б.М. Локштанов
Keyword(s):  
Field Experiments ◽  
Bulk Material ◽  
Average Particle Size ◽  
Operating Conditions ◽  
Angle Of Repose ◽  
Wood Dust ◽  
Average Particle ◽  
Bulk Materials ◽  
Technical Literature ◽  
The Impact

При проектировании открытых и закрытых хранилищ измельченных сыпучих материалов древесных материалов, таких как щепа и опилки, большое значение имеет угол естественного откоса (статический и динамический) этих материалов. В технической литературе приводятся противоречивые сведения о величине этих углов, что приводит к ошибкам при проектировании складов. В справочных данных не учитываются условия, в которых эксплуатируются емкости для хранения сыпучих материалов, свойства и состояние этих сыпучих материалов. В свою очередь, ошибки при проектировании приводят к проблемам (зависание, сводообразование, «затопление» и т. д.) и авариям при эксплуатации бункеров и силосов на производстве. В статье представлены сведения, посвященные влиянию влажности и температуры на угол естественного откоса сыпучих материалов. На основании лабораторных и натурных экспериментов, проведенных с помощью специально разработанных методик и установок, была скорректирована формула для определения углов естественного откоса (статического и динамического) для измельченных древесных материалов в зависимости от их фракционного и породного состава, влажности (абсолютной и относительной) и температуры. При помощи скорректированной формулы можно определить угол естественного откоса древесных сыпучих материалов со среднегеометрическим размером частицы от 0,5 мм до 15 мм (от древесной пыли до технологической щепы) в различных производственных условиях. Статья может быть полезна проектировщикам при расчете угла наклона граней выпускающей воронки бункеров и силосов предприятий лесной отрасли и целлюлозо-бумажной промышленности. In the design of open and closed storage warehouses chopped wood materials for bulk materials such as wood chips and sawdust, great importance has an angle of repose (static and dynamic) of these materials. In the technical literature are conflicting reports about the magnitude of these angles, which leads to errors in the design of warehouses. In the referencesdoes not take into account the conditions under which operated capacities for storage of bulk materials, and properties and condition of the bulk material. The design errors lead to problems (hanging, arching, «flooding», etc.) and accidents in the operation of hoppers and silos at the mills. The article provides information on the impact of humidity and temperature on the angle of repose of granular materials. On the basis of laboratory and field experiments, conducted with the help of specially developed techniques and facilities has been adjusted formula for determining the angle of repose (static and dynamic) for the shredded wood materials depending on their fractional and species composition, humidity (absolute and relative) and temperature. It is possible, by using the corrected formula, to determine the angle of repose of loose wood materials with average particle size of from 0.5 mm to 15 mm (wood dust to pulpchips) in various operating conditions. The article can be helpful to designers in the calculation of the angle of inclination of the funnel faces produces bunkers and silos forest industries and pulp and paper industry.

Formulating SLN and NLC as Innovative Drug Delivery Systems for Non-Invasive Routes of Drug Administration

2020 ◽  
Vol 27 (22) ◽  
pp. 3623-3656 ◽  
Author(s):  
Bruno Fonseca-Santos ◽  
Patrícia Bento Silva ◽  
Roberta Balansin Rigon ◽  
Mariana Rillo Sato ◽  
Marlus Chorilli
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
Average Particle Size ◽  
Delivery Systems ◽  
Average Particle ◽  
Minor Importance ◽  
Routes Of Administration ◽  
Non Invasive

Colloidal carriers diverge depending on their composition, ability to incorporate drugs and applicability, but the common feature is the small average particle size. Among the carriers with the potential nanostructured drug delivery application there are SLN and NLC. These nanostructured systems consist of complex lipids and highly purified mixtures of glycerides having varying particle size. Also, these systems have shown physical stability, protection capacity of unstable drugs, release control ability, excellent tolerability, possibility of vectorization, and no reported production problems related to large-scale. Several production procedures can be applied to achieve high association efficiency between the bioactive and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes Lipid-based nanocarriers (LNCs) versatile delivery system for various routes of administration. The route of administration has a significant impact on the therapeutic outcome of a drug. Thus, the non-invasive routes, which were of minor importance as parts of drug delivery in the past, have assumed added importance drugs, proteins, peptides and biopharmaceuticals drug delivery and these include nasal, buccal, vaginal and transdermal routes. The objective of this paper is to present the state of the art concerning the application of the lipid nanocarriers designated for non-invasive routes of administration. In this manner, this review presents an innovative technological platform to develop nanostructured delivery systems with great versatility of application in non-invasive routes of administration and targeting drug release.

Azithromycin nanosuspension preparation using evaporative precipitation into aqueous solution (EPAS) method and its comparative dissolution study

2020 ◽  
Vol 17 ◽  
Author(s):  
Mohammad Hossain Shariare ◽  
Tonmoy Kumar Mondal ◽  
Hani Alothaid ◽  
Md. Didaruzzaman Sohel ◽  
MD Wadud ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Dissolution Rate ◽  
Average Particle Size ◽  
Scale Up ◽  
Average Particle ◽  
Total Drug ◽  
Residual Solvent ◽  
Dissolution Study ◽  
Drug Content

Aim: EPAS (evaporative precipitation into aqueous solution) was used in the current studies to prepare azithromycin nanosuspensions and investigate the physicochemical characteristics for the nanosuspension batches with the aim of enhancing the dissolution rate of the nanopreparation to improve bioavailability. Methods: EPAS method used in this study for preparing azithromycin nanosuspension was achieved through developing an in-house instrumentation method. Particle size distribution was measured using Zetasizer Nano S without sample dilution. Dissolved azithromycin nanosuspensions were also compared with raw azithromycin powder and commercially available products. Total drug content of nanosuspension batches were measured using an Ultra-Performance Liquid Chromatography (UPLC) system with Photodiode Array (PDA) detector while residual solvent was measured using gas chromatography (GC). Results: The average particle size of azithromycin nanosuspension was 447.2 nm and total drug content was measured to be 97.81% upon recovery. Dissolution study data showed significant increase in dissolution rate for nanosuspension batch when compared to raw azithromycin and commercial version (microsuspension). The residual solvent found for azithromycin nanosuspension is 0.000098023 mg/ mL or 98.023 ppb. Conclusion: EPAS was successfully used to prepare azithromycin nanoparticles that exhibited significantly enhanced dissolution rate. Further studies are required to scale up the process and determine long term stability of the nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document