scholarly journals Microfluidization-Driven Changes in Some Physicochemical Characteristics, Metal/Mineral Composition, and Sensory Attributes of Sugarcane Juice

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Ayon Tarafdar ◽  
Barjinder Pal Kaur
Keyword(s):  
Electrical Conductivity ◽  
Mineral Composition ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Sugarcane Juice ◽  
Soluble Solids ◽  
Overall Acceptability ◽  
Sensory Score ◽  
Filtration Effect ◽  
Interaction Chamber

This work evaluated the effect of microfluidization at different pressure (50, 100, 150, and 200 MPa)-cycle (1, 3, 5, 7) combinations on the physicochemical (total soluble solids, titratable acidity, pH, and electrical conductivity), sensory, and metal/mineral composition of sugarcane juice which was previously unexplored. Juice extracted from blanched sugarcane stems (var Co 0238) was microfluidized, and the analysis for different parameters was conducted using standard protocols. The mineral/metal composition was determined using ICP-OES following a wet digestion method. Results showed that TSS decreased from 18.88 °Brix to a range of 10.15–15.7 °Brix with the former (lower value) being due to the release of insoluble matter after microfluidization which was further solubilised at higher processing cycles (as in the latter). The pH did not vary significantly as compared to control and was in the range of 5.2–5.7. However, a decrease in titratable acidity (0.1–0.26%) was found as compared to control (0.26%). The electrical conductivity of microfluidized sugarcane juice varied from 4.45 to 5.12 mS as compared to 4.95 mS for control. Metal/mineral analysis showed rich reserves of magnesium, phosphorus, potassium, and calcium in sugarcane juice which degraded after microfluidization perhaps due to filtration effect caused by the micropore in the interaction chamber of the microfluidizer. The sensory score showed acceptability of the juice after microfluidization (overall acceptability ∼7).

Optimization of nutritional beverage developed from radish, sugarcane and herbal extract using response surface methodology

2018 ◽  
Vol 48 (5) ◽  
pp. 733-743 ◽  
Author(s):  
Gagandeep Kaur ◽  
Vikas Kumar ◽  
Ankit Goyal ◽  
Beenu Tanwar ◽  
Jaspreet Kaur
Keyword(s):  
Salt Concentration ◽  
Statistical Significance ◽  
Statistical Design ◽  
Titratable Acidity ◽  
Sugarcane Juice ◽  
Soluble Solids ◽  
Herbal Extract ◽  
Process Conditions ◽  
Content Type ◽  
Overall Acceptability

Purpose Radish (Raphanus sativus) is valued for its nutritive and medicinal properties, but its juice is not palatable because of the pungent flavor. The purpose of this study is to optimize the blending process of radish juice by using sugarcane juice, herbal extract and salt concentration. Design/methodology/approach The statistical design provided 20 formulations; where herbal extract concentration varied from 0.5 to 2.5 per cent, sugarcane juice concentration from 20 to 50 per cent and salt concentration from 0 to 1.5 per cent. Findings The p = 0.05 was used to designate the statistical significance of all the responses under study. Different product formulations had total soluble solids (TSS) that ranged from 9.7 to 15.0°Brix, titratable acidity from 0.6 to 1.3%, pH from 3.3 to 4.0, reducing sugars from 0.6 to 0.8%, total sugars from 9.4 to 3.1%, total protein from 172.9 to 304.8 mg/100 ml, total phenols from 25.5 to 29.8 mg/100 ml, ascorbic acid from 10.4 to 19.8 mg/100 ml, antioxidant activity from 77.3 to 83.6% and overall acceptability from 5.6 to 7.7. Sugarcane juice concentration of 30%, herbal extract mixture and salt concentrations of 1 and 1.5%, respectively, were the optimized process conditions for the preparation of nutritional radish juice achieved with the best fit of desirability, i.e. 0.88. Cluster analysis revealed that concentration of sugarcane juice had the maximum significant effect on the quality characteristics of nutritional radish beverage as compared to the other two variables under study. Originality/value The developed product can help to promote the use of radish as a substrate for the beverage industry.

Study of the quality and antioxidant properties of tomatoes (Solanum lycopersicum L.) under different postharvest and dehydration conditions

2020 ◽  
Vol 13 (9) ◽  
Author(s):  
María Lorena Luna-Guevara ◽  
Teresita González-Sánchez ◽  
Adriana Delgado-Alvarado ◽  
María Elena Ramos-Cassellis ◽  
José Guillermo Pérez-Luna ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Rural Communities ◽  
Antioxidant Properties ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Soluble Solids ◽  
Convective Drying ◽  
Tomato Fruits ◽  
Solanum Lycopersicum L ◽  
Storage Temperatures

Objective: To study the effect of storage temperatures and dehydration conditions (solar and convective drying; SD, CD), on the quality, physicochemical parameters and antioxidant properties of tomato fruits. Methodology: The physicochemical characteristics pH, titratable acidity, soluble solids (°Bx) and color parameters (L*, a* and b*), were evaluated. The lycopene, carotenoids and antioxidant activity percentages retention of tomatoes fruits stored at 7 and 22 ° C for 5 days and subjected to SD (Temperature (T) of 67 °C and luminescence of 685 lum/sqf) and CD (T 70 °C, flow rates 0.5, 1.0 and 1.5 m/s), were analyzed. Results: The fruits reached humidities of 17 and 15% for SD and CD. The parameters pH, °Bx, L*, a*, b* were highest with 22°C and CD (1.5 m/s). The value of the carotenoids was higher in fruits stored at 7 ° C and subjected to CD (1.0 and 1.5 m/s) and SD with values of 83.85, 85.98 and 99.43%, respectively. The CD (0.5 m/s) and SD improved lycopene (94.37 and 95.14%) and the antioxidant activity with values of 73.06 and 97.21%. Implications: The application of solar dehydration depends on luminescence condition; however, it is inexpensive and environmentally friendly alternative. Conclusions: The results derived in a viable alternative for the conservation and commercialization of tomato fruits in rural communities

scholarly journals Preliminary Insights in Sensory Profile of Sweet Cherries

Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 612
Author(s):  
Vânia Silva ◽  
Sandra Pereira ◽  
Alice Vilela ◽  
Eunice Bacelar ◽  
Francisco Guedes ◽  
...  
Keyword(s):  
Sweet Cherry ◽  
Prunus Avium ◽  
Sugar Content ◽  
Principal Component ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Quality Parameters ◽  
Sensory Profile ◽  
Soluble Solids ◽  
Sensory Data

Sweet cherry (Prunus avium L.) is a fruit appreciated by consumers for its well-known physical and sensory characteristics and its health benefits. Being an extremely perishable fruit, it is important to know the unique attributes of the cultivars to develop cultivation or postharvest strategies that can enhance their quality. This study aimed to understand the influence of physicochemical characteristics of two sweet cherry cultivars, Burlat and Van, on the food quality perception. Several parameters (weight, dimensions, soluble solids content (SSC), pH, titratable acidity (TA), colour, and texture) were measured and correlated with sensory data. Results showed that cv. Van presented heavier and firmer fruits with high sugar content. In turn, cv. Burlat showed higher pH, lower TA, and presented redder and brightest fruits. The principal component analysis revealed an evident separation between cultivars. Van cherries stood out for their sensory parameters and were classified as more acidic, bitter, and astringent, and presented a firmer texture. Contrarily, Burlat cherries were distinguished as being more flavourful, succulent, sweeter, and more uniform in terms of visual and colour parameters. The results of the sensory analysis suggested that perceived quality does not always depend on and/or recognize the quality parameters inherent to the physicochemical characteristics of each cultivar.

scholarly journals Postharvest quality of strawberry fruits produced in organic and conventional systems

2011 ◽  
Vol 29 (4) ◽  
pp. 577-583 ◽  
Author(s):  
Letícia KP Camargo ◽  
Juliano Tadeu V de Resende ◽  
Tânia T Tominaga ◽  
Sonia Maria Kurchaidt ◽  
Cristhiano K Camargo ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Conventional System ◽  
Organic System ◽  
Camino Real ◽  
Sensorial Attributes ◽  
Solids Content ◽  
Conventional Systems

The aim of this study was to determine some physicochemical characteristics of fruits of eight strawberry cultivars (Aromas, Camino Real, Campinas, Dover, Oso Grande, Toyonoka, Tudla-Milsei and Ventana) cultivated in organic and conventional systems. The evaluated characteristics were soluble solids (SS), titratable acidity (TA), SS/AT ratio and anthocyanins. Evaluated sensory characteristics were flavor and appearance. The cultivars had a differential performance between themselves and among the systems for the evaluated characteristics. Generally, the conventional system produced fruit with higher levels of soluble solids and, organic system produced higher concentrations of anthocyanins. The fruits of the cultivar Toyonoka had the best soluble solids content in both systems and the anthocyanins content of 'Tudla-Milsei' and 'Camino Real' were proeminent in comparison to the other cultivars. The fruits from the organic system of production were preferred by judges on the sensorial attributes. The highest notes were given to the appearance of the cultivar Ventana in the conventional system and 'Tudla-Milsei' in the organic system.

scholarly journals Quality variables for technological application of cocoa clones from the Brazilian semiarid region

2021 ◽  
Vol 25 (3) ◽  
pp. 203-208
Author(s):  
Bianca M. Reges ◽  
Anielly M. Maia ◽  
Diogenes H. A. Sarmento ◽  
Mayara S. Silva ◽  
Sandra M. L. dos Santos ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Soluble Solids ◽  
Semiarid Region ◽  
Transverse Diameter ◽  
Brazilian Semiarid ◽  
Physical Traits ◽  
Chemical Traits ◽  
Food Processes ◽  
Longitudinal Diameter

ABSTRACT Characterization of cocoa clones produced in the semiarid region is necessary to enlarge the database about these implanted clones and thus enhance the quality of their by-products. Therefore, this study aims to evaluate physical, chemical, and physicochemical characteristics of the CCN 51, CEPEC 2004, CEPEC 2005, and PS 1319 clones, produced in the region of Vale do Jaguaribe in the state of Ceará (Brazil), and to suggest food processes or products for them. The clones were evaluated according to their physical traits (total fruit mass, rind, pulp, seeds, and placenta and pulp with seeds), fruit transverse diameter (FTD), fruit longitudinal diameter (FLD), the ratio FTD/FLD; rind external thickness (ERT), rind internal thickness (IRT), the ratio ERT/IRT, number of seeds, seed thickness, seed transverse diameter (STD), seed longitudinal diameter (SLD), and the ratio STD/SLD, yield, pulp color, chemical traits (humidity, lipids, proteins, ashes, crude fiber, and carbohydrates), and physicochemical traits (titratable acidity, pH, soluble solids, and reducing sugars) were evaluated. The CCN 51 and CEPEC 2005 clones are the most suitable for the process of cocoa fermentation. For desserts, jams, pulp, and nibs for fat-restricted diets, the most suitable clones are CCN 51, CEPEC 2005, PS 1319 and CEPEC 2004, respectively.

scholarly journals Stability of Kiwi Varieties of ‘Hayward’ in Powder During Storage

2020 ◽  
Vol 8 (2) ◽  
pp. 150
Author(s):  
Inacia Dos Santos Moreira ◽  
Jacinete Pereira Lima ◽  
Deise Souza de Castro ◽  
Wilton Pereira da Silva ◽  
Josivanda Palmeira Gomes ◽  
...  
Keyword(s):  
Water Activity ◽  
Bioactive Compounds ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Soluble Solids ◽  
Total Chlorophyll ◽  
Lower Content ◽  
Total Water ◽  
Ph Values ◽  
The Stability

For the preservation of products obtained by dehydration, it is necessary to evaluate their physicochemical characteristics during storage. It was proposed, in the present study, to evaluate the stability of the kiwi cv. ‘Hayward’ powder, obtained at temperatures of 60 and 70 °C during its storage in laminated packages under controlled conditions of temperature (25 ºC) and relative humidity (75%) for 90 days. The parameter’s evaluated were: moisture content, ashes, soluble solids, titratable acidity (% citric acid), pH, water activity at 25 ºC, color for the parameters lightness (L*) and chromaticity (+a* red; -a* green; +b* yellow; and -b* blue), phenolic compounds, flavonoids, total chlorophyll and carotenoids. It was observed that, after the 90 days, for the powder obtained at 70 °C, the soluble solids and pH values were altered by the storage, which did not occur for the powder obtained at 60 °C. For both powders, the content of ash and bioactive compounds were not affected by storage. The parameter of lightness decreased in both powders. The powder obtained at 70 ºC proved to be better, showing lower content of moisture and total water activity, as well as the highest values of bioactive compounds.

scholarly journals Preservation and evaluation of spiced chayote juice using hurdle technology

2019 ◽  
Vol 22 ◽  
Author(s):  
Chesi Sangma ◽  
Vikas Kumar ◽  
Sheenam Suri ◽  
Yogesh Gat ◽  
Manisha Kaushal ◽  
...  
Keyword(s):  
Reducing Power ◽  
Storage Period ◽  
Titratable Acidity ◽  
Sugarcane Juice ◽  
Raw Material ◽  
Soluble Solids ◽  
Plate Count ◽  
Total Phenolic ◽  
Total Protein Content ◽  
Hurdle Technology

Abstract Chayote (Sechium edule) is a perennial climbing plant, belonging to the Cucurbitaceae family and is neglected or underutilized as a food or as a raw material in the food industry because of its bland taste. This bland taste can be overcome by blending with a suitable substrate such as sugarcane juice along with natural flavouring. However, this blending represents a preservation problem for the spiced juice, since both chayote juice and sugarcane juice are prone to microbial attack. Therefore, an attempt was made in the present study to preserve the spiced chayote juice by employing different hurdles i.e. pasteurization temperature (70 °C and 80 °C) and pasteurization time (10 and 20 min) followed by the addition of different concentrations of potassium metabisulphite (KMS) (200, 300 and 400 ppm). The samples so prepared were filled into glass bottles and stored under refrigeration for forty-five days. As the storage period proceeded there were significant decreases in pH, total protein content, total phenolic compounds, antioxidant activity, reducing power, metal chelation, tannin content, ascorbic acid content and overall acceptability, whereas there were significant increases in TSS (total soluble solids), titratable acidity, reducing sugars, total sugar, TPC (total plate count) and MIC (minimum inhibitory concentration). A cluster analysis of the data revealed that the pasteurization temperature exerted the most significant effect on the physicochemical and sensory characteristics of the spiced chayote juice as compared to the pasteurization time and KMS concentration, which failed to fall into the separate and respective clusters. In a nutshell, it was concluded that spiced chayote juice can be successfully preserved using hurdle technology (pasteurizing at 70 °C for 10 min followed by the addition of 400ppm KMS).

scholarly journals Flowering period and fruit quality of peach trees selections and cultivars in the metropolitan region of Curitiba

2018 ◽  
Vol 40 (3) ◽  
Author(s):  
Giselda Alves ◽  
Jhulia Gelain ◽  
Gloria Soriano Vidal ◽  
Cristiano Nunes Nesi ◽  
Louise Larissa May De Mio ◽  
...  
Keyword(s):  
Skin Color ◽  
Fruit Set ◽  
Fruit Size ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Metropolitan Region ◽  
Flowering Period ◽  
Peach Trees

Abstract This study aimed to evaluate the flowering period and the physicochemical characteristics of peaches, aiming to find those most promising for the diversification of the peach crop in the Metropolitan Region of Curitiba, Paraná State. We evaluated 8 selections and three cultivars in Porto Amazonas and 10 cultivars in Araucaria for flowering period, fruit set, diameter and height of fruit, average fruit weight, the skin color, soluble solids (SS), titratable acidity (TA), ratio SS/ TA, hydrogen potential (pH). The flowering period occurred between late June and late September ranging from 16 to 25 days. The fruit set rate was greater than 50% for ‘Cascata 1513’, ‘Cascata 1429’, ‘Cascata 1577’, ‘Cascata 1743’ and for all cultivars in Araucaria. There were significant differences for the other variables assessed. It was concluded that in Araucária, ‘Charme’ and ‘Chimarrita’ are good planting options, have the same duration of the cycle (111 days), being ‘Charme’ a little later. Besides these, ‘Douradão’ and ‘Rubimel’ have good fruit size, moderate acidity and best SS/TA ratio, being earlier than the previous ones. ‘PS 25399’ is the earliest and showed reddish epidermis and great consumer interest. In Porto Amazonas, selections and cultivars tested produced little fruit of small size, being required more studies to be recommended in these area.

scholarly journals Study of Heat Treatment in Processing of Pumpkin Puree (Cucurbita moschata)

2017 ◽  
Vol 9 (10) ◽  
pp. 234 ◽  
Author(s):  
L. C. O. Santos Jr ◽  
Vanessa Simão ◽  
Júlia Dos Santos Opuski de Almeida ◽  
Ana Carolina Moura de Sena Aquino ◽  
Eduardo Carasek ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Microbial Contamination ◽  
Degradation Products ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Soluble Solids ◽  
Microbial Load ◽  
Cucurbita Moschata ◽  
Total Carotenoids ◽  
Physicochemical Changes

Pumpkins have richness of nutrients and in puree form may contribute to their greater appreciation in the vegetable processing industry. However, studies are necessary for its processing, since it is part of the group of risk of microbial contamination (pH > 4.5). Thus, this work aimed to study the pumpkin puree processing by heat treatment in autoclave wherein the product was subjected to sterilization by autoclaving at 121 °C to check their microbial load and physicochemical characteristics and to identify the volatile compounds of headspace in stand up pouch packaging. The heat treatment in autoclave for 10, 20 and 30 minutes was effective in eliminating microbial load of the sample (< 1.0 × 101) and also induced the decrease of pH and increase of titratable acidity (TA), total soluble solids (TSS) and total carotenoids. The compounds identified in the headspace after autoclaving were alcohols, aldehydes, alkenes, ketones, esters, ethers and terpenes, many of them aromatic compounds that characterize pumpkin and carotenoid degradation products and acids that justify physicochemical changes after processing.

scholarly journals Utilization of Dairy Industry Waste-Whey in Formulation of Papaya RTS Beverage

2017 ◽  
Vol 5 (2) ◽  
pp. 168-174 ◽  
Author(s):  
Anil Panghal ◽  
Vikas Kumar ◽  
Sanju Dhull ◽  
Yogesh Gat ◽  
Navnidhi Chhikara
Keyword(s):  
New Product Development ◽  
Nutritional Value ◽  
Dairy Industry ◽  
Titratable Acidity ◽  
Nutritional Composition ◽  
Environmental Pollutant ◽  
Soluble Solids ◽  
Microbial Quality ◽  
Industry Waste ◽  
Overall Acceptability

Fruits and vegetable are highly perishable and are subjected to rapid post harvest losses. Their value addition can enhance shelf life, new product development and finally commodity value in market. The present work was planned to prepare papaya based beverage with whey incorporation (0, 25, 50 and 100%), which is a major environmental pollutant from dairy industry. RTS was evaluated for its nutritional composition, physicochemical attributes like titratable acidity, total soluble solids, total and reducing sugars and sensory quality. Microbial quality was also observed for 60 days. Results revealed that on increasing whey incorporation, nutritional quality was enhanced, but poor sensory and microbial quality was observed. Beverage with 25% addition was found most acceptable with overall acceptability of 8.59±0.21. Selected beverage has 15.05±0.18 oBrix TSS, 0.30±0.11% acidity, 5.37±0.01g/100g reducing sugar, 14.06±0.46 g/100g total sugar and 5.60±0.02 mg/100g ascorbic acid, thus depicting enhanced nutritional value and this creates a scope for better health, enhanced papaya postharvest value and whey utilization.

Sign in / Sign up

Export Citation Format

Share Document