scholarly journals Numerical Study to Assess the Structural Behavior of the Bajrakli Mosque (Western Kosovo)

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Huseyin Bilgin ◽  
Faton Ramadani
Keyword(s):  
Stress Concentration ◽  
Cultural Heritage ◽  
Numerical Study ◽  
Structural Behavior ◽  
Maximum Displacement ◽  
Element Analysis ◽  
Earthquake Load ◽  
Clear Insight ◽  
Representative Model ◽  
Critical Regions

Cultural heritage is one of most significant concerns in modern societies carrying different social and historical values. Among the stock of cultural heritage, historical monuments are one of the greatest contributors to the values in many aspects. Due to several factors, such structures have gone through changes causing structural deficiencies. The aim of this study is to provide a clear insight of the cause and impacts of structural deficiencies through visual inspections and computational methods. As a representative model, Bajrakli Mosque located in western of Kosovo is selected as a case study. During visual inspections, some cracks are found along the structural elements of the mosque. A possible cause of the structural cracks may be the stress concentration through the regions of the structure. In order to provide a better understanding, two different loadings are considered to examine the structural behavior of the mosque. The first loading covers the analysis due to gravity loads, whereas the second one defines the dynamic loading due to ground shakings defined by the earthquake spectrum using finite element analysis in SAP2000. By means of these analyses, the performance of the building is examined. As a result, important data are obtained for identifying the critical regions of the structure. The maximum displacement of the structure is found to be 7.1 mm and 8.0 mm in combination of self-weight and earthquake load in X and Y direction, respectively. Moreover, the regions showing highest values of stress concentration are found through the small domes, through the openings of main dome and connections with arches, and around the openings of the walls.

Experimental, numerical and parametric studies on stress concentration factors of T-joints under tension

2021 ◽  
pp. 136943322110499
Author(s):  
Feleb Matti ◽  
Fidelis Mashiri
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Numerical Study ◽  
Hot Spot ◽  
Joint Models ◽  
Element Analysis ◽  
T Joints ◽  
Concentration Factors ◽  
Stress Concentration Factors ◽  
Good Agreement

This paper investigates the behaviour of square hollow section (SHS) T-joints under static axial tension for the determination of stress concentration factors (SCFs) at the hot spot locations. Five empty and corresponding concrete-filled SHS-SHS T-joint connections were tested experimentally and numerically. The experimental investigation was carried out by attaching strain gauges onto the SHS-SHS T-joint specimens. The numerical study was then conducted by developing three-dimensional finite element (FE) T-joint models using ABAQUS finite element analysis software for capturing the distribution of the SCFs at the hot spot locations. The results showed that there is a good agreement between the experimental and numerical SCFs. A series of formulae for the prediction of SCF in concrete-filled SHS T-joints under tension were proposed, and good agreement was achieved between the maximum SCFs in SHS T-joints calculated from FE T-joint models and those from the predicted formulae.

scholarly journals Modeling of Size Effects in Bending of Perforated Cosserat Plates

2017 ◽  
Vol 2017 ◽  
pp. 1-19 ◽  
Author(s):  
Roman Kvasov ◽  
Lev Steinberg
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Numerical Study ◽  
The Finite Element Method ◽  
Classical Elasticity ◽  
Element Analysis ◽  
Plate Deformation ◽  
The Finite Element Analysis ◽  
Circular Holes ◽  
Different Shapes

This paper presents the numerical study of Cosserat elastic plate deformation based on the parametric theory of Cosserat plates, recently developed by the authors. The numerical results are obtained using the Finite Element Method used to solve the parametric system of 9 kinematic equations. We discuss the existence and uniqueness of the weak solution and the convergence of the proposed FEM. The Finite Element analysis of clamped Cosserat plates of different shapes under different loads is provided. We present the numerical validation of the proposed FEM by estimating the order of convergence, when comparing the main kinematic variables with an analytical solution. We also consider the numerical analysis of plates with circular holes. We show that the stress concentration factor around the hole is less than the classical value, and smaller holes exhibit less stress concentration as would be expected on the basis of the classical elasticity.

scholarly journals A Numerical Study on the Control of Horizontal Cracking at the Ends of BS22 Hollow-type PC-girders Utilizing Midas FEA

2021 ◽  
Vol 1996 (1) ◽  
pp. 012011
Author(s):  
Abdul Khaliq Karimi ◽  
Bashir Ahmad Aasim ◽  
Jun Tomiyama
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Concentration ◽  
Numerical Study ◽  
Crack Size ◽  
Analysis Software ◽  
Principal Stresses ◽  
Element Analysis ◽  
Crack Penetration ◽  
Strand Debonding

Abstract When the prestressing forces transfer from PC-strands to concrete, a region of stress concentration develops at the ends of pretensioned girders, which often results in horizontal cracking during or just after the detensioning process. In this study, a hollow PC-girder was modeled utilizing a Finite Element Analysis software Midas FEA to identify the horizontal cracking locations in terms of the principal stresses at the end-zone of the hollow PC-girder. Strand-debonding and placing end-zone reinforcements were hired in this work by introducing four cases. The only strand-debonding method could not prevent horizontal end crack penetration. Though the end-zone reinforcements were placed alongside the strand-debonding, this combination could reduce principal stresses to a level that could bring the crack size to a negligible range.

Fatigue Failure Analysis Using the Theory of Critical Distance

2011 ◽  
Vol 462-463 ◽  
pp. 663-667 ◽  
Author(s):  
Ruslizam Daud ◽  
Ahmad Kamal Ariffin ◽  
Shahrum Abdullah ◽  
Al Emran Ismail
Keyword(s):  
Stress Concentration ◽  
Fatigue Failure ◽  
Notch Root ◽  
High Stress ◽  
Critical Distance ◽  
Future Research ◽  
Element Analysis ◽  
Linear Elastic ◽  
The Finite Element Analysis ◽  
Elastic Fracture

This paper explores the initial potential of theory of critical distance (TCD) which offers essential fatigue failure prediction in engineering components. The intention is to find the most appropriate TCD approach for a case of multiple stress concentration features in future research. The TCD is based on critical distance from notch root and represents the extension of linear elastic fracture mechanics (LEFM) principles. The approach is allowing possibilities for fatigue limit prediction based on localized stress concentration, which are characterized by high stress gradients. Using the finite element analysis (FEA) results and some data from literature, TCD applications is illustrated by a case study on engineering components in different geometrical notch radius. Further applications of TCD to various kinds of engineering problems are discussed.

scholarly journals Design and analysis of concrete-filled tubular flange girders under combined loading

2021 ◽  
pp. 136943322110015
Author(s):  
Rana Al-Dujele ◽  
Katherine Ann Cashell
Keyword(s):  
Finite Element ◽  
Axial Force ◽  
Failure Modes ◽  
Numerical Study ◽  
Combined Loading ◽  
Torsional Stiffness ◽  
Fe Model ◽  
Combined Effects ◽  
Element Analysis ◽  
Hollow Section

This paper is concerned with the behaviour of concrete-filled tubular flange girders (CFTFGs) under the combination of bending and tensile axial force. CFTFG is a relatively new structural solution comprising a steel beam in which the compression flange plate is replaced with a concrete-filled hollow section to create an efficient and effective load-carrying solution. These members have very high torsional stiffness and lateral torsional buckling strength in comparison with conventional steel I-girders of similar depth, width and steel weight and are there-fore capable of carrying very heavy loads over long spans. Current design codes do not explicitly include guidance for the design of these members, which are asymmetric in nature under the combined effects of tension and bending. The current paper presents a numerical study into the behaviour of CFTFGs under the combined effects of positive bending and axial tension. The study includes different loading combinations and the associated failure modes are identified and discussed. To facilitate this study, a finite element (FE) model is developed using the ABAQUS software which is capable of capturing both the geometric and material nonlinearities of the behaviour. Based on the results of finite element analysis, the moment–axial force interaction relationship is presented and a simplified equation is proposed for the design of CFTFGs under combined bending and tensile axial force.

scholarly journals On Hydromechanical Interaction during Propagation of Localized Damage in Rocks

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 162
Author(s):  
A.A. Jameei ◽  
S. Pietruszczak
Keyword(s):  
Numerical Study ◽  
Fluid Pressure ◽  
Implicit Time ◽  
Integration Scheme ◽  
Internal Length ◽  
Element Analysis ◽  
Equivalent Permeability ◽  
Mechanical Coupling ◽  
Splitting Test ◽  
Localized Damage

This paper provides a mathematical description of hydromechanical coupling associated with propagation of localized damage. The framework incorporates an embedded discontinuity approach and addresses the assessment of both hydraulic and mechanical properties in the region intercepted by a fracture. Within this approach, an internal length scale parameter is explicitly employed in the definition of equivalent permeability as well as the tangential stiffness operators. The effect of the progressive evolution of damage on the hydro-mechanical coupling is examined and an evolution law is derived governing the variation of equivalent permeability with the continuing deformation. The framework is verified by a numerical study involving 3D simulation of an axial splitting test carried out on a saturated sample under displacement and fluid pressure-controlled conditions. The finite element analysis incorporates the Polynomial-Pressure-Projection (PPP) stabilization technique and a fully implicit time integration scheme.

scholarly journals An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
M. S. H. Bhuiyan ◽  
I. A. Choudhury ◽  
M. Dahari ◽  
Y. Nukman ◽  
S. Z. Dawal
Keyword(s):  
Knee Joint ◽  
Motion Analysis ◽  
Maximum Stress ◽  
Real Data ◽  
Fe Analysis ◽  
Knee Prostheses ◽  
Maximum Displacement ◽  
Element Analysis ◽  
Lower Limb Prosthesis ◽  
Limb Prosthesis

A gear-based knee joint is designed to improve the performance of mechanical-type above-knee prostheses. The gear set with the help of some bracing, and bracket arrangement, is used to enable the prosthesis to follow the residual limb movement. The motion analysis and finite-element analysis (FEA) of knee joint components are carried out to assess the feasibility of the design. The maximum stress of 29.74 MPa and maximum strain of 2.393e−004 are obtained in the gear, whereas the maximum displacement of 7.975 mm occurred in the stopper of the knee arrangement. The factor of safety of 3.5 obtained from the FE analysis indicated no possibility of design failure. The results obtained from the FE analysis are then compared with the real data obtained from the literature for a similar subject. The pattern of motion analysis results has shown a great resemblance with the gait cycle of a healthy biological limb.

scholarly journals Estimating Deterioration in the Concrete Tie-Ballast Interface Based on Vertical Tie Deflection Profile: A Numerical Study

2016 ◽  
Author(s):  
Hailing Yu
Keyword(s):  
Direct Detection ◽  
Numerical Study ◽  
Interface Condition ◽  
Vertical Deflection ◽  
Cohesive Elements ◽  
Material Loss ◽  
Element Analysis ◽  
Cross Sectional ◽  
Technical Requirements ◽  
Support Conditions

In ballasted concrete tie track, the tie-ballast interface can deteriorate resulting in concrete tie bottom abrasion, ballast pulverization and/or voids in tie-ballast interfaces. Tie-ballast voids toward tie ends can lead to unfavorable center binding support conditions that can result in premature concrete tie failure and possible train derailment. Direct detection of these conditions is difficult. There is a strong interest in assessing the concrete tie-ballast interface conditions indirectly using measured vertical deflections. This paper seeks to establish a link between the vertical deflection profile of a concrete tie top surface and the tie-ballast interface condition using the finite element analysis (FEA) method. The concrete tie is modeled as a concrete matrix embedded with prestressing steel strands or wires. The configurations of two commonly used concrete ties, one with 8 prestressing strands and the other with 20 prestressing wires, are employed in this study. All models are three-dimensional and symmetric about the tie center. A damaged plasticity model that can predict onset and propagation of tensile cracks is applied to the concrete material. The steel-concrete interface is homogenized and represented with a thin layer of cohesive elements sandwiched between steel and concrete elements. Strand- or wire-specific elasto-plastic bond models developed at the Volpe Center are applied to the cohesive elements to account for the interface bonding mechanisms. FE models are developed for both original and worn concrete ties, with the latter assuming hypothetical patterns of reduced cross sections resulting from abrasive interactions with the ballast. Static analyses of pretension release in these concrete ties are conducted, and vertical deflection gradients along tie lengths are calculated and shown to correspond well with the worn cross sectional patterns for a given reinforcement type. The ballast is further modeled with Extended Drucker-Prager plasticity, and hypothetical voids are applied toward the tie ends along the concrete tie-ballast interface to simulate center binding support conditions. The distance range over which the concrete tie is supported in the center is variable and yields different center binding severity. Static simulations are completed with vertical rail seat loads applied on the concrete tie-ballast assembly. The influences of various factors on the vertical deflection profile, including tie type, vertical load magnitude, center binding severity, cross sectional material loss and prestress loss, are examined based on the FEA results. The work presented in this paper demonstrates the potential of using the vertical deflection profile of concrete tie top surfaces to assess deteriorations in the tie-ballast interface. The simulation results further help to clarify minimum technical requirements on inspection technologies that measure concrete tie vertical deflection profiles.

Lifetime Prediction of Components Including Initiation Phase

2006 ◽  
Author(s):  
Michael Besel ◽  
Angelika Brueckner-Foit
Keyword(s):  
Input Data ◽  
Local Stress ◽  
Fatigue Loading ◽  
Computer Code ◽  
Lifetime Distribution ◽  
Element Analysis ◽  
Initiation Phase ◽  
Mechanics Model ◽  
Critical Regions ◽  
Local Stress Field

The lifetime distribution of a component subjected to fatigue loading is calculated using a micro-mechanics model for crack initiation and a fracture mechanics model for crack growth. These models are implemented in a computer code which uses the local stress field obtained in a Finite Element analysis as input data. Elemental failure probabilities are defined which allow to identify critical regions and are independent of mesh refinement. An example is given to illustrate the capabilities of the code. Special emphasis is put on the effect of the initiation phase on the lifetime distribution.

Sign in / Sign up

Export Citation Format

Share Document