Study on the Key Influential Factors on Water Huff-n-Puff in Ultralow-Permeability Reservoir

Ultralow-permeability reservoirs are difficult to effectively develop using conventional technologies, so it generally produces using horizontal wells’ volume fracturing. Besides, oil wells also face the problems of short stable or no production period, rapid decline rate, and extremely low development degree. Water huff-n-puff of oil recovery technology is a quality and efficiency technology to improve the development effect of an ultralow-permeability reservoir. A systematic study on the related key influential factors of water huff-n-puff is done for improving the development effect of ultralow-permeability reservoirs. This manuscript studied the key influential factors of water huff-n-puff and related improving recovery methods using physical simulation experiments to put forward a beneficial condition for water huff-n-puff, combining with the field practice. The results show that imbibition and energy supplement are main mechanisms of water huff-n-puff; imbibition oil recovery is influenced by rock wettability, permeability, boundary condition, fracture length, water injection speed, and imbibition solution type; the stronger the water-wet reservoir rock is, the bigger the core permeability is, the longer the fracture length is, the larger the contacting area between imbibition solution and rock is, the stronger the ability of imbibition solution to change wettability, and to reduce the interfacial tension force between oil and water is, the better effect of water huff-n-puff is. So far, the field practice of water huff-n-puff has been conducted in 38 wells; the success rate can reach 92.1%, cycle oil increment of single well can reach 972 t, and accumulated oil in evaluation period can reach 36936 t, which further proves that water huff-n-puff can achieve a good effect. The effective methods to improve the development effect of an ultralow-permeability reservoir are changing reservoir physical property and supplying reservoir energy. Higher reservoir energy is good for oil flow, and better physical property can improve the displacement effect and imbibition function of injection solution. Artificial fracturing, higher injection-production ratio, and pretreatment of temporary stoppage fracturing are good methods to improve the development effect of water huff-puff.

Download Full-text

The Effect of Perforation Spacing on the Variation of Stress Shadow

Energies ◽

10.3390/en14134040 ◽

2021 ◽

Vol 14 (13) ◽

pp. 4040

Author(s):

Weige Han ◽

Zhendong Cui ◽

Zhengguo Zhu

Keyword(s):

Compressive Stress ◽

Reservoir Rock ◽

Hydraulic Fractures ◽

Extended Finite Element ◽

Gas Reservoir ◽

Fracture Length ◽

Shadow Effect ◽

Stress Shadow ◽

Initiation Pressure ◽

Small Perforation

When the shale gas reservoir is fractured, stress shadows can cause reorientation of hydraulic fractures and affect the complexity. To reveal the variation of stress shadow with perforation spacing, the numerical model between different perforation spacing was simulated by the extended finite element method (XFEM). The variation of stress shadows was analyzed from the stress of two perforation centers, the fracture path, and the ratio of fracture length to spacing. The simulations showed that the reservoir rock at the two perforation centers is always in a state of compressive stress, and the smaller the perforation spacing, the higher the maximum compressive stress. Moreover, the compressive stress value can directly reflect the size of the stress shadow effect, which changes with the fracture propagation. When the fracture length extends to 2.5 times the perforation spacing, the stress shadow effect is the strongest. In addition, small perforation spacing leads to backward-spreading of hydraulic fractures, and the smaller the perforation spacing, the greater the deflection degree of hydraulic fractures. Additionally, the deflection angle of the fracture decreases with the expansion of the fracture. Furthermore, the perforation spacing has an important influence on the initiation pressure, and the smaller the perforation spacing, the greater the initiation pressure. At the same time, there is also a perforation spacing which minimizes the initiation pressure. However, when the perforation spacing increases to a certain value (the result of this work is about 14 m), the initiation pressure will not change. This study will be useful in guiding the design of programs in simultaneous fracturing.

Download Full-text

Physical property relationships of the Rotokawa Andesite, a significant geothermal reservoir rock in the Taupo Volcanic Zone, New Zealand

Geothermal Energy ◽

10.1186/s40517-014-0010-4 ◽

2014 ◽

Vol 2 (1) ◽

Cited By ~ 42

Author(s):

Paul A Siratovich ◽

Michael J Heap ◽

Marlène C Villenueve ◽

James W Cole ◽

Thierry Reuschlé

Keyword(s):

New Zealand ◽

Physical Property ◽

Geothermal Reservoir ◽

Reservoir Rock ◽

Taupo Volcanic Zone ◽

Volcanic Zone

Download Full-text

Enhanced Oil Recovery Application of Nanoparticles in Niger Delta Water-Wet Reservoir Rock

10.2118/207150-ms ◽

2021 ◽

Author(s):

Tinuola Udoh

Keyword(s):

Enhanced Oil Recovery ◽

Oil Recovery ◽

Niger Delta ◽

Oil Production ◽

Reservoir Rock ◽

Core Flooding ◽

Core Samples ◽

Recovery Potential ◽

Secondary Formation ◽

Injection Modes

Abstract In this paper, the enhanced oil recovery potential of the application of nanoparticles in Niger Delta water-wet reservoir rock was investigated. Core flooding experiments were conducted on the sandstone core samples at 25 °C with the applications of nanoparticles in secondary and tertiary injection modes. The oil production during flooding was used to evaluate the enhanced oil recovery potential of the nanoparticles in the reservoir rock. The results of the study showed that the application of nanoparticles in tertiary mode after the secondary formation brine flooding increased oil production by 16.19% OIIP. Also, a comparison between the oil recoveries from secondary formation brine and nanoparticles flooding showed that higher oil recovery of 81% OIIP was made with secondary nanoparticles flooding against 57% OIIP made with formation brine flooding. Finally, better oil recovery of 7.67% OIIP was achieved with secondary application of nanoparticles relative to the tertiary application of formation brine and nanoparticles flooding. The results of this study are significant for the design of the application of nanoparticles in Niger Delta reservoirs.

Download Full-text

Nanoparticles Aid Oil Recovery During Alternating Injection

Journal of Petroleum Technology ◽

10.2118/0921-0062-jpt ◽

2021 ◽

Vol 73 (09) ◽

pp. 62-63

Author(s):

Chris Carpenter

Keyword(s):

Oil Recovery ◽

Sodium Dodecyl ◽

Surfactant Solution ◽

Volatile Oil ◽

Technical Conference ◽

Reservoir Rock ◽

Low Salinity ◽

Low Salinity Water ◽

Custom Made ◽

Salinity Water

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 201586, “Effect of Silica Nanoparticles on Oil Recovery During Alternating Injection With Low-Salinity Water and Surfactant Into Carbonate Reservoirs,” by Saheed Olawale Olayiwola, SPE, and Morteza Dejam, SPE, University of Wyoming, prepared for the 2020 SPE Annual Technical Conference and Exhibition, originally scheduled to be held in Denver, Colorado, 5–7 October. The paper has not been peer reviewed. Although the potential of nanoparticles (NPs) to improve oil recovery is promising, their effect during alternating injection is still uncertain. The main objective of the authors’ study is to investigate the best recovery mechanisms during alternating injection of NPs, low-salinity water (LSW), and surfactant and transform the results into field-scale technology. The outcome of these experiments revealed that tertiary injection of NPs results in additional oil recovery beyond the limits of LSW. Introduction A series of coreflooding experiments was conducted using several cores with an effective permeability of approximately 1 md to the brine at a temperature and pressure of 70°C and 3,000 psi. The study performs four different alternating injections of NPs with LSW and surfactant to determine optimal oil recovery. The wettability of the rock and fluid and the interfacial tension (IFT) of oil and water are measured to understand the mechanisms of interactions between the fluids and the reservoir rock. Materials A 12×12×12-in. block taken from an outcrop of Indiana limestone reservoir was purchased for this study. Four core plugs with a diameter of 1.5 in., used for the coreflooding experiments, were selected from this block. A synthetic 100,000-ppm (10 wt%) brine was prepared in the laboratory by dissolving sodium chloride (NaCl) and calcium chloride with a ratio of 4:1 in deionized water. The crude oil used in this study was a volatile oil (properties are described in Table 2 of the complete paper) obtained from the Permian Basin in Texas. Injected Fluids. A 10,000-ppm (1 wt%) LSW was prepared by diluting the synthetic brine 10 times. The surfactant solutions were prepared from an anionic sodium dodecyl sulfate (SDS) surfactant. A 1,000-ppm (0.1 wt%) surfactant solution used throughout the experiments was selected on the basis of the estimated critical micelle concentration of 600 to 2,240 ppm for SDS and nanofluid/NaCl. The concentration of silica NPs used in this study was 500 ppm (0.05 wt%). The nanofluids were pre-pared either as a simple solution or as a mixture with other chemicals to make a concentration of 500-ppm silica NPs. Coreflooding System. The established coreflooding system used for this experimental study was custom-made to determine the oil recovery and the relative permeabilities at steady-state and unsteady-state flows. However, the focus of this study is to investigate the effect of silica NPs on oil recovery. The schematic diagram of the coreflooding system is shown in Fig. 1.

Download Full-text

A new slick water system for hydraulic fracturing in tight reservoir to enhance imbibition oil recovery

E3S Web of Conferences ◽

10.1051/e3sconf/202130301001 ◽

2021 ◽

Vol 303 ◽

pp. 01001

Author(s):

Yu Haiyang ◽

Ji Wenjuan ◽

Luo Cheng ◽

Lu Junkai ◽

Yan Fei ◽

...

Keyword(s):

Contact Angle ◽

Interfacial Tension ◽

Hydraulic Fracturing ◽

Oil Recovery ◽

Water System ◽

Natural Fracture ◽

Fracturing Fluid ◽

The Core ◽

Ultralow Permeability

In order to give full play to the role of imbibition of capillary force and enhance oil recovery of ultralow permeability sandstone reservoir after hydraulic fracturing, the mixed water fracture technology based on functional slick water is described and successfully applied to several wells in oilfield. The core of the technology is determination of influence factors of imbibition oil recovery, the development of new functional slick water system and optimization of volume fracturing parameters. The imbibition results show that it is significant effect of interfacial tension, wetting on imbibition oil recovery. The interfacial tension decreases by an order of magnitude, the imbibition oil recovery reduces by more than 10%. The imbibition oil recovery increases with the contact angle decreasing. The emulsifying ability has no obvious effect on imbibition oil recovery. The functional slick water system considering imbibition is developed based on the solution rheology and polymer chemistry. The system has introduced the active group and temperature resistant group into the polymer molecules. The molecular weight is controlled in 1.5 million. The viscosity is greater than 2mPa·s after shearing 2h under 170s-1 and 100℃. The interfacial tension could decrease to 10-2mN/m. The contact angle decreased from 58° to 22° and the core damage rate is less than 12%. The imbibition oil recovery could reach to 43%. The fracturing process includes slick water stage and linear gel stage. 10% 100 mesh ceramists and 8% temporary plugging agents are carried into the formation by functional slick water. 40-70 mesh ceramists are carried by linear gel. The liquid volume ratio is about 4:1 and the displacement is controlled at 10-12m3/min. The sand content and fracturing fluid volumes of single stage are 80m3 and 2500 m3 respectively. Compared with conventional fracturing, due to imbibition oil recovery, there is only 25% of the fracturing fluid flowback rate when the crude oil flew out. When the oil well is in normal production, about 50% of the fracturing fluid is not returned. It is useful to maintain the formation energy and slow down the production decline. The average cumulative production of vertical wells is greater than 2800t, and the effective period is more than 2 years. This technology overcoming the problem of high horizontal stress difference and lack of natural fracture has been successfully applied in Jidong Oilfield ultralow permeability reservoir. The successful application of this technology not only helps to promote the effective use of ultralow permeability reservoirs, but also helps to further clarify the role of imbibition recovery, energy storage and oil-water replacement mechanism.

Download Full-text

Penerapan Dinamika Fluida dalam Perhitungan Kecepatan Aliran dan Perolehan Minyak di Reservoir

ComTech Computer Mathematics and Engineering Applications ◽

10.21512/comtech.v5i2.2232 ◽

2014 ◽

Vol 5 (2) ◽

pp. 707

Author(s):

Dwi Listriana Kusumastuti

Keyword(s):

Fluid Dynamics ◽

Fluid Flow ◽

Flow Velocity ◽

Oil Recovery ◽

Control Volume ◽

Petroleum Industry ◽

Reservoir Rock ◽

Curved Pipe ◽

Fluid Flow Velocity ◽

Control Volumes

Water, oil and gas inside the earth are stored in the pores of the reservoir rock. In the world of petroleum industry, calculation of volume of the oil that can be recovered from the reservoir is something important to do. This calculation involves the calculation of the velocity of fluid flow by utilizing the principles and formulas provided by the Fluid Dynamics. The formula is usually applied to the fluid flow passing through a well defined control volume, for example: cylinder, curved pipe, straight pipes with different diameters at the input and output, and so forth. However, because of reservoir rock, as the fluid flow medium, has a wide variety of possible forms of the control volumes, hence, calculation of the velocity of the fluid flow is becoming difficult as it would involve calculations of fluid flow velocity for each control volume. This difficulties is mainly caused by the fact that these control volumes, that existed in the rock, cannot be well defined. This paper will describe a method for calculating this fluid flow velocity of the control volume, which consists of a combination of laboratory measurements and the use of some theories in the Fluid Dynamics. This method has been proofed can be used for calculating fluid flow velocity as well as oil recovery in reservoir rocks, with fairly good accuration.

Download Full-text

Complex Stimulation Approach to Low-Temperature Carbonate Formation Revitalizes Bahrain Brownfield

10.2118/204562-ms ◽

2021 ◽

Author(s):

Ahmed AlJanahi ◽

Sayed Abdelrady ◽

Hassan AlMannai ◽

Feras AlTawash ◽

Eyad Ali ◽

...

Keyword(s):

Low Temperature ◽

Oil Recovery ◽

Mesh Size ◽

Lessons Learned ◽

Laboratory Research ◽

Fracture Width ◽

Field Development ◽

Fracture Length ◽

Carbonate Formation ◽

Formation Pore Pressure

Abstract Carbonate formations often require stimulation treatments to be developed economically. Sometimes, proppant fracturing yields better results than acid stimulation. Carbonates are seldom stimulated with large-mesh-size proppants due to admittance issues caused by fissures and high Young’s modulus and narrow fracture width. The Magwa formation of Bahrain’s Awali brownfield is a rare case in which large treatments using 12/20-mesh proppant were successful after the more than 50 years of field development. To achieve success, a complex approach was required during preparation and execution of the hydraulic fracturing campaign. During the first phase, the main challenges that restricted achieving full production potential in previous stimulation attempts (both acid and proppant fracturing) were identified. Fines migration and shale instability were addressed during advanced core testing. Tests for embedment were conducted, and a full suite of logs was obtained to improve geomechanical modeling. In addition, a target was set to maximize fracture propped length to address the need for maximum reservoir contact in the tight Magwa reservoir and to maximize fracture width and conductivity. Sufficient fracture width in the shallow oil formation was required to withstand embedment. Sufficient conductivity was required to clean out the fracture under low-temperature conditions (124°F) and to minimize drawdown along the fracture considering the relatively low energy of the formation (pore pressure less than 1,000 psi). Understanding the fracture dimensions was critical to optimize the design. Independent measurement using high-resolution temperature logging and advanced sonic anisotropy measurements after fracturing helped to quantify fracture height. As a result of the applied comprehensive workflow, 18 wells were successfully stimulated, including three horizontal wellbores with multistage fracturing - achieving effective fracture half-lengths of 450-to 500-ft. Oil production from the wells exceeded expectations and more than doubled the results of all the previous attempts. Production decline rates were also less pronounced due to achieved fracture length and the ability to produce more reservoir compartments. The increase in oil recovery is due to the more uniform drainage systems enabled by the conductive fractures. The application of new and advanced techniques taken from several disciplines enabled successful propped fracture stimulation of a fractured carbonate formation. Extensive laboratory research and independent geometry measurements yielded significant fracture optimization and resulted in a step-change in well productivity. The techniques and lessons learned will be of benefit to engineers dealing with shallow carbonate reservoirs around the world.

Download Full-text

Experimental Design and Evaluation of Surfactant Polymer for a Heavy Oil Field in South of Sultanate of Oman

10.2118/205118-ms ◽

2021 ◽

Author(s):

Ali Reham Al-Jabri ◽

Rouhollah Farajzadeh ◽

Abdullah Alkindi ◽

Rifaat Al-Mjeni ◽

David Rousseau ◽

...

Keyword(s):

Oil Recovery ◽

Heavy Oil ◽

History Matching ◽

Oil Field ◽

Reservoir Rock ◽

Sultanate Of Oman ◽

Industrial Chemicals ◽

Oil Viscosity ◽

Injection Strategy ◽

Operational Conditions

Abstract Heavy oil reservoirs remain challenging for surfactant-based EOR. In particular, selecting fine-tuned and cost effective chemical formulations requires extensive laboratory work and a solid methodology. This paper reports a laboratory feasibility study, aiming at designing a surfactant-polymer pilot for a heavy oil field with an oil viscosity of ~500cP in the South of Sultanate of Oman, where polymer flooding has already been successfully trialed. A major driver was to design a simple chemical EOR method, to minimize the risk of operational issues (e.g. scaling) and ensure smooth logistics on the field. To that end, a dedicated alkaline-free and solvent-free surfactant polymer (SP) formulation has been designed, with its sole three components, polymer, surfactant and co-surfactant, being readily available industrial chemicals. This part of the work has been reported in a previous paper. A comprehensive set of oil recovery coreflood tests has then been carried out with two objectives: validate the intrinsic performances of the SP formulation in terms of residual oil mobilization and establish an optimal injection strategy to maximize oil recovery with minimal surfactant dosage. The 10 coreflood tests performed involved: Bentheimer sandstone, for baseline assessments on large plugs with minimized experimental uncertainties; homogeneous artificial sand and clays granular packs built to have representative mineralogical composition, for tuning of the injection parameters; native reservoir rock plugs, unstacked in order to avoid any bias, to validate the injection strategy in fully representative conditions. All surfactant injections were performed after long polymer injections, to mimic the operational conditions in the field. Under injection of "infinite" slugs of the SP formulation, all tests have led to tertiary recoveries of more than 88% of the remaining oil after waterflood with final oil saturations of less than 5%. When short slugs of SP formulation were injected, tertiary recoveries were larger than 70% ROIP with final oil saturations less than 10%. The final optimized test on a reservoir rock plug, which was selected after an extensive review of the petrophysical and mineralogical properties of the available reservoir cores, led to a tertiary recovery of 90% ROIP with a final oil saturation of 2%, after injection of 0.35 PV of SP formulation at 6 g/L total surfactant concentration, with surfactant losses of 0.14 mg-surfactant/g(rock). Further optimization will allow accelerating oil bank arrival and reducing the large PV of chase polymer needed to mobilize the liberated oil. An additional part of the work consisted in generating the parameters needed for reservoir scale simulation. This required dedicated laboratory assays and history matching simulations of which the results are presented and discussed. These outcomes validate, at lab scale, the feasibility of a surfactant polymer process for the heavy oil field investigated. As there has been no published field test of SP injection in heavy oil, this work may also open the way to a new range of field applications.

Download Full-text

Automation of Carbonate Rock Thin Section Description Using Cognitive Image Recognition

10.2118/208149-ms ◽

2021 ◽

Author(s):

Hesham Talaat Shebl ◽

Mohamed Ali Al Tamimi ◽

Douglas Alexander Boyd ◽

Hani Abdulla Nehaid

Keyword(s):

Thin Section ◽

Image Recognition ◽

Oil Recovery ◽

Reservoir Rock ◽

Supervised Machine Learning ◽

Neural Net ◽

Data Set ◽

Thin Sections ◽

Rock Quality ◽

Pore Types

Abstract Simulation Engineers and Geomodelers rely on reservoir rock geological descriptions to help identify baffles, barriers and pathways to fluid flow critical to accurate reservoir performance predictions. Part of the reservoir modelling process involves Petrographers laboriously describing rock thin sections to interpret the depositional environment and diagenetic processes controlling rock quality, which along with pressure differences, controls fluid movement and influences ultimate oil recovery. Supervised Machine Learning and a rock fabric labelled data set was used to train a neural net to recognize Modified Durham classification reservoir rock thin section images and their individual components (fossils and pore types) plus predict rock quality. The image recognition program's accuracy was tested on an unseen thin section image database.

Download Full-text

The Effect of Nanoparticles Crystallite Size on the Recovery Efficiency in Dielectric Nanofluid Flooding

Journal of Nano Research ◽

10.4028/www.scientific.net/jnanor.21.103 ◽

2012 ◽

Vol 21 ◽

pp. 103-108 ◽

Cited By ~ 20

Author(s):

Hasnah Mohd Zaid ◽

Noorhana Yahya ◽

Noor Rasyada Ahmad Latiff

Keyword(s):

Interfacial Tension ◽

Crystallite Size ◽

Oil Recovery ◽

Zno Nanoparticles ◽

Sodium Dodecyl ◽

Substantial Reduction ◽

Reservoir Rock ◽

Recovery Efficiency ◽

Spontaneous Emulsification ◽

Emulsification Process

Application of nanotechnology in enhanced oil recovery (EOR) has been increasing in recent years. After secondary flooding, more than 60% of the original oil in place (OOIP) remains in the reservoir due to trapping of oil in the reservoir rock pores. One of the promising EOR methods is surfactant flooding, where substantial reduction in interfacial tension between oil and water could sufficiently displace oil from the reservoir. In this research, instability at the interfaces is created by dispersing 0.05 wt% ZnO nanoparticles in aqueous sodium dodecyl sulfate (SDS) solution during the core flooding experiment. The difference in the amount of particles adsorbed at the interface creates variation in the localized interfacial tension, thus induces fluid motion to reduce the stress. Four samples of different average crystallite size were used to study the effect of particle size on the spontaneous emulsification process which would in turn determine the recovery efficiency. From the study, ZnO nanofluid which consists of larger particles size gives 145% increase in the oil recovery as compared with the smaller ZnO nanoparticles. In contrast, 63% more oil was recovered by injecting Al2O3 nanofluid of smaller particles size as compared to the larger one. Formation of a cloudy solution was observed during the test which indicates the occurrence of an emulsification process. It can be concluded that ultralow Interfacial tension (IFT) value is not necessary to create spontaneous emulsification in dielectric nanofluid flooding.

Download Full-text