scholarly journals Aircraft Target Classification Method for Conventional Narrowband Radar Based on Micro-Doppler Effect

2022 ◽  
Vol 2022 ◽  
pp. 1-11
Author(s):  
Saiqiang Xia ◽  
Chaowei Zhang ◽  
Wanyong Cai ◽  
Jun Yang ◽  
Liangfa Hua ◽  
...  

For a conventional narrowband radar system, its insufficient bandwidth usually leads to the lack of detectable information of the target, and it is difficult for the radar to classify the target types, such as rotor helicopter, propeller aircraft, and jet aircraft. To address the classification problem of three different types of aircraft target, a joint multifeature classification method based on the micro-Doppler effect in the echo caused by the target micromotion is proposed in this paper. Through the characteristics analysis of the target simulation echoes obtained from the target scattering point model, four features with obvious distinguishability are extracted from the time domain and frequency domain, respectively, that is, flicker interval, fractal dimension, modulation bandwidth, and second central moment. Then, a support vector machine model will be applied to the classification of the three different types of aircraft. Compared with the conventional method, the proposed method has better classification performance and can significantly improve the classification probability of aircraft target. The simulations are carried out to validate the effectiveness of the proposed method.

2017 ◽  
Vol 24 (4) ◽  
pp. 701-720 ◽  
Author(s):  
Jiang Cui ◽  
Ge Shi ◽  
Chunying Gong

AbstractFault detection and location are important and front-end tasks in assuring the reliability of power electronic circuits. In essence, both tasks can be considered as the classification problem. This paper presents a fast fault classification method for power electronic circuits by using the support vector machine (SVM) as a classifier and the wavelet transform as a feature extraction technique. Using one-against-rest SVM and one-against-one SVM are two general approaches to fault classification in power electronic circuits. However, these methods have a high computational complexity, therefore in this design we employ a directed acyclic graph (DAG) SVM to implement the fault classification. The DAG SVM is close to the one-against-one SVM regarding its classification performance, but it is much faster. Moreover, in the presented approach, the DAG SVM is improved by introducing the method of Knearest neighbours to reduce some computations, so that the classification time can be further reduced. A rectifier and an inverter are demonstrated to prove effectiveness of the presented design.


2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Yizhe Wang ◽  
Cunqian Feng ◽  
Yongshun Zhang ◽  
Sisan He

Precession is a common micromotion form of space targets, introducing additional micro-Doppler (m-D) modulation into the radar echo. Effective classification of space targets is of great significance for further micromotion parameter extraction and identification. Feature extraction is a key step during the classification process, largely influencing the final classification performance. This paper presents two methods for classifying different types of space precession targets from the HRRPs. We first establish the precession model of space targets and analyze the scattering characteristics and then compute electromagnetic data of the cone target, cone-cylinder target, and cone-cylinder-flare target. Experimental results demonstrate that the support vector machine (SVM) using histograms of oriented gradient (HOG) features achieves a good result, whereas the deep convolutional neural network (DCNN) obtains a higher classification accuracy. DCNN combines the feature extractor and the classifier itself to automatically mine the high-level signatures of HRRPs through a training process. Besides, the efficiency of the two classification processes are compared using the same dataset.


Mathematics ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 1263
Author(s):  
Chih-Yao Chang ◽  
Kuo-Ping Lin

Classification problems are very important issues in real enterprises. In the patent infringement issue, accurate classification could help enterprises to understand court decisions to avoid patent infringement. However, the general classification method does not perform well in the patent infringement problem because there are too many complex variables. Therefore, this study attempts to develop a classification method, the support vector machine with new fuzzy selection (SVMFS), to judge the infringement of patent rights. The raw data are divided into training and testing sets. However, the data quality of the training set is not easy to evaluate. Effective data quality management requires a structural core that can support data operations. This study adopts new fuzzy selection based on membership values, which are generated from fuzzy c-means clustering, to select appropriate data to enhance the classification performance of the support vector machine (SVM). An empirical example based on the SVMFS shows that the proposed SVMFS can obtain a superior accuracy rate. Moreover, the new fuzzy selection also verifies that it can effectively select the training dataset.


Author(s):  
YUN LING ◽  
QIUYAN CAO ◽  
HUA ZHANG

Consumer credit scoring is considered as a crucial issue in the credit industry. SVM has been successfully utilized for classification in many areas including credit scoring. Kernel function is vital when applying SVM to classification problem for enhancing the prediction performance. Currently, most of kernel functions used in SVM are single kernel functions such as the radial basis function (RBF) which has been widely used. On the basis of the existing kernel functions, this paper proposes a multi-kernel function to improve the learning and generalization ability of SVM by integrating several single kernel functions. Chaos particle swarm optimization (CPSO) which is a kind of improved PSO algorithm is utilized to optimize parameters and to select features simultaneously. Two UCI credit data sets are used as the experimental data to evaluate the classification performance of the proposed method.


Author(s):  
DAYAN MANOHAR SIVALINGAM ◽  
NARENKUMAR PANDIAN ◽  
JEZEKIEL BEN-ARIE

In this work, we develop an efficient technique to transform a multiclass recognition problem into a minimal binary classification problem using the Minimal Classification Method (MCM). The MCM requires only log 2 N classifications whereas the other methods require much more. For the classification, we use Support Vector Machine (SVM) based binary classifiers since they have superior generalization performance. Unlike the prevalent one-versus-one strategy (the bottom-up one-versus-one strategy is called tournament method) that separates only two classes at each classification, the binary classifiers in our method have to separate two groups of multiple classes. As a result, the probability of generalization error increases. This problem is alleviated by utilizing error correcting codes, which results only in a marginal increase in the required number of classifications. However, in comparison to the tournament method, our method requires only 50% of the classifications and still similar performance can be attained. The proposed solution is tested with the Columbia Object Image Library (COIL). We also test the performance under conditions of noise and occlusion.


2018 ◽  
Vol 28 (08) ◽  
pp. 1850017 ◽  
Author(s):  
Chen Fang ◽  
Chunfei Li ◽  
Mercedes Cabrerizo ◽  
Armando Barreto ◽  
Jean Andrian ◽  
...  

Over the past few years, several approaches have been proposed to assist in the early diagnosis of Alzheimer’s disease (AD) and its prodromal stage of mild cognitive impairment (MCI). Using multimodal biomarkers for this high-dimensional classification problem, the widely used algorithms include Support Vector Machines (SVM), Sparse Representation-based classification (SRC), Deep Belief Networks (DBN) and Random Forest (RF). These widely used algorithms continue to yield unsatisfactory performance for delineating the MCI participants from the cognitively normal control (CN) group. A novel Gaussian discriminant analysis-based algorithm is thus introduced to achieve a more effective and accurate classification performance than the aforementioned state-of-the-art algorithms. This study makes use of magnetic resonance imaging (MRI) data uniquely as input to two separate high-dimensional decision spaces that reflect the structural measures of the two brain hemispheres. The data used include 190 CN, 305 MCI and 133 AD subjects as part of the AD Big Data DREAM Challenge #1. Using 80% data for a 10-fold cross-validation, the proposed algorithm achieved an average F1 score of 95.89% and an accuracy of 96.54% for discriminating AD from CN; and more importantly, an average F1 score of 92.08% and an accuracy of 90.26% for discriminating MCI from CN. Then, a true test was implemented on the remaining 20% held-out test data. For discriminating MCI from CN, an accuracy of 80.61%, a sensitivity of 81.97% and a specificity of 78.38% were obtained. These results show significant improvement over existing algorithms for discriminating the subtle differences between MCI participants and the CN group.


BMC Genomics ◽  
2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Hao Wang ◽  
Yijie Ding ◽  
Jijun Tang ◽  
Quan Zou ◽  
Fei Guo

Abstract Background Biological functions of biomolecules rely on the cellular compartments where they are located in cells. Importantly, RNAs are assigned in specific locations of a cell, enabling the cell to implement diverse biochemical processes in the way of concurrency. However, lots of existing RNA subcellular localization classifiers only solve the problem of single-label classification. It is of great practical significance to expand RNA subcellular localization into multi-label classification problem. Results In this study, we extract multi-label classification datasets about RNA-associated subcellular localizations on various types of RNAs, and then construct subcellular localization datasets on four RNA categories. In order to study Homo sapiens, we further establish human RNA subcellular localization datasets. Furthermore, we utilize different nucleotide property composition models to extract effective features to adequately represent the important information of nucleotide sequences. In the most critical part, we achieve a major challenge that is to fuse the multivariate information through multiple kernel learning based on Hilbert-Schmidt independence criterion. The optimal combined kernel can be put into an integration support vector machine model for identifying multi-label RNA subcellular localizations. Our method obtained excellent results of 0.703, 0.757, 0.787, and 0.800, respectively on four RNA data sets on average precision. Conclusion To be specific, our novel method performs outstanding rather than other prediction tools on novel benchmark datasets. Moreover, we establish user-friendly web server with the implementation of our method.


Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8108
Author(s):  
Fei Deng ◽  
Shu-Qing Li ◽  
Xi-Ran Zhang ◽  
Lin Zhao ◽  
Ji-Bing Huang ◽  
...  

Ultrasonic guided waves are sensitive to many different types of defects and have been studied for defect recognition in rail. However, most fault recognition algorithms need to extract features from the time domain, frequency domain, or time-frequency domain based on experience or professional knowledge. This paper proposes a new method for identifying many different types of rail defects. The segment principal components analysis (S-PCA) is developed to extract characteristics from signals collected by sensors located at different positions. Then, the Support Vector Machine (SVM) model is used to identify different defects depending on the features extracted. Combining simulations and experiments of the rails with different kinds of defects are established to verify the effectiveness of the proposed defect identification techniques, such as crack, corrosion, and transverse crack under the shelling. There are nine channels of the excitation-reception to acquire guided wave detection signals. The results show that the defect classification accuracy rates are 96.29% and 96.15% for combining multiple signals, such as the method of single-point excitation and multi-point reception, or the method of multi-point excitation and reception at a single point.


2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Ahmed Almusawi ◽  
Haleh Amintoosi

DNS tunneling is a method used by malicious users who intend to bypass the firewall to send or receive commands and data. This has a significant impact on revealing or releasing classified information. Several researchers have examined the use of machine learning in terms of detecting DNS tunneling. However, these studies have treated the problem of DNS tunneling as a binary classification where the class label is either legitimate or tunnel. In fact, there are different types of DNS tunneling such as FTP-DNS tunneling, HTTP-DNS tunneling, HTTPS-DNS tunneling, and POP3-DNS tunneling. Therefore, there is a vital demand to not only detect the DNS tunneling but rather classify such tunnel. This study aims to propose a multilabel support vector machine in order to detect and classify the DNS tunneling. The proposed method has been evaluated using a benchmark dataset that contains numerous DNS queries and is compared with a multilabel Bayesian classifier based on the number of corrected classified DNS tunneling instances. Experimental results demonstrate the efficacy of the proposed SVM classification method by obtaining an f-measure of 0.80.


Sign in / Sign up

Export Citation Format

Share Document