Adverse Effect of Europium Doping on Magneto-Optical Properties of Cr2O3

2020 ◽  
Vol 12 (1) ◽  
pp. 36-39 ◽  
Author(s):  
Divya Rehani ◽  
Swati Bishnoi ◽  
Manish Saxena ◽  
Shailesh Narain Sharma
Keyword(s):  
Optical Properties ◽  
Chromium Oxide ◽  
Magnetic Measurements ◽  
Synthesis Method ◽  
Oxide Powder ◽  
X Ray Diffraction ◽  
X Ray ◽  
Europium Doping ◽  
Visible Luminescence ◽  
Solid State Synthesis Method

The article describes in detail the effect of doping Europium (Eu) on magnetic and optical properties of Cr2O3. Undoped and Eu (1–5 mol%) doped Cr2O3 samples were synthesized using solid state synthesis method. The structural, magnetic and optical properties of undoped and Europium (Eu) doped chromium oxide powder were studied by X-ray diffractometer (XRD), vibrating sample magnetometer (VSM) and photoluminescence (PL) measurements. The X-ray diffraction pattern confirms the polycrystalline nature of undoped and Europium (Eu) doped chromium oxide powder. The magnetic measurements revealed decline in magnetism with increasing Eu concentration. With increasing Eu concentration, the visible luminescence of Cr2O3 improved. The study highlighted that Eu as a dopant is not suitable for improving the magnetic properties of Cr2O3.

scholarly journals Effects of Li+ Codoping on the Optical Properties of SrAl2O4 Long Afterglow Ceramic Phosphors

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Timur Sh. Atabaev ◽  
Hong Ha Thi Vu ◽  
Mac Kim ◽  
Yong Suk Yang ◽  
Hyung-Kook Kim ◽  
...  
Keyword(s):  
Optical Properties ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Synthesis Method ◽  
Strontium Aluminate ◽  
X Ray Diffraction ◽  
High Brightness ◽  
X Ray ◽  
Long Afterglow ◽  
Scanning Electron

Rare-earths codoped long afterglow strontium aluminate phosphors with high brightness were synthesized via a facile combustion synthesis method using urea as a fuel. The resulted phosphor particles were analyzed by using X-ray diffraction and field emission scanning electron microscope, whereas their optical properties were monitored by photoluminescence spectroscopy. The prepared SrAl2O4:Eu2+, Dy3+, Li+ samples showed a broad green-yellowish emission, peaking at 512 nm when excited by 348 nm. Compared to traditional SrAl2O4:Eu2+, Dy3+ phosphor, the initial luminescence brightness of SrAl2O4:Eu2+, Dy3+, codoped with Li+ improved from 1.89 cd/m2 to 2.71 cd/m2 and the afterglow decay time was prolonged from 103 to 121 min. The possible mechanism of SrAl2O4:Eu2+, Dy3+, Li+ phosphorescence enhancement has been discussed.

scholarly journals Doping Effect of Lead(II) on Structural and Optical Properties of Chromium Oxide Nanoparticles

2020 ◽  
Vol 32 (12) ◽  
pp. 3002-3006
Author(s):  
N. Kalaiselvi ◽  
K.U. Madhu
Keyword(s):  
Optical Properties ◽  
Chromium Oxide ◽  
Morphological Properties ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Prepared Nanoparticles ◽  
Chromium Oxide Nanoparticles ◽  
Pure Chromium

In this work, the effects of doping post transition metal (Pb2+) on the structural, morphological, elemental and optical properties of pure chromium oxide nanoparticles are reported. The structural and morphological properties were examined by X-ray diffraction and scanning electron microscopy (SEM). The elemental composition of the prepared nanoparticles were estimated from energy dispersive X-ray (EDX) absorption spectra. The band gap energies of the prepared nanoparticles (4.72-3.78 eV) obtained from UV-vis absorption spectroscopy is higher than that of bulk Cr2O3 (3.3 eV), which ensures that the prepared nanoparticles were successfully synthesized in the nano-region.

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

scholarly journals Study on the Electrical, Structural, Chemical and Optical Properties of PVD Ta(N) Films Deposited with Different N2 Flow Rates

Coatings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 937
Author(s):  
Yingying Hu ◽  
Md Rasadujjaman ◽  
Yanrong Wang ◽  
Jing Zhang ◽  
Jiang Yan ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Crystal Size ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Dc Magnetron Sputtering ◽  
Flow Rates ◽  
X Ray ◽  
N2 Flow Rate

By reactive DC magnetron sputtering from a pure Ta target onto silicon substrates, Ta(N) films were prepared with different N2 flow rates of 0, 12, 17, 25, 38, and 58 sccm. The effects of N2 flow rate on the electrical properties, crystal structure, elemental composition, and optical properties of Ta(N) were studied. These properties were characterized by the four-probe method, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and spectroscopic ellipsometry (SE). Results show that the deposition rate decreases with an increase of N2 flows. Furthermore, as resistivity increases, the crystal size decreases, the crystal structure transitions from β-Ta to TaN(111), and finally becomes the N-rich phase Ta3N5(130, 040). Studying the optical properties, it is found that there are differences in the refractive index (n) and extinction coefficient (k) of Ta(N) with different thicknesses and different N2 flow rates, depending on the crystal size and crystal phase structure.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

scholarly journals Dissimilatory Iron-Reducing Microorganisms Are Present and Active in the Sediments of the Doce River and Tributaries Impacted by Iron Mine Tailings from the Collapsed Fundão Dam (Mariana, MG, Brazil)

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 244
Author(s):  
Carolina N. Keim ◽  
Jilder D. P. Serna ◽  
Daniel Acosta-Avalos ◽  
Reiner Neumann ◽  
Alex S. Silva ◽  
...  
Keyword(s):  
Bottom Sediments ◽  
Magnetic Measurements ◽  
Culture Media ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ferric Oxyhydroxide ◽  
Transmission Electron ◽  
Iron Mine ◽  
Organic Matter Oxidation ◽  
Doce River

On 5 November 2015, a large tailing deposit failed in Brazil, releasing an estimated 32.6 to 62 million m3 of iron mining tailings into the environment. Tailings from the Fundão Dam flowed down through the Gualaxo do Norte and Carmo riverbeds and floodplains and reached the Doce River. Since then, bottom sediments have become enriched in Fe(III) oxyhydroxides. Dissimilatory iron-reducing microorganisms (DIRMs) are anaerobes able to couple organic matter oxidation to Fe(III) reduction, producing CO2 and Fe(II), which can precipitate as magnetite (FeO·Fe2O3) and other Fe(II) minerals. In this work, we investigated the presence of DIRMs in affected and non-affected bottom sediments of the Gualaxo do Norte and Doce Rivers. The increase in Fe(II) concentrations in culture media over time indicated the presence of Fe(III)-reducing microorganisms in all sediments tested, which could reduce Fe(III) from both tailings and amorphous ferric oxyhydroxide. Half of our enrichment cultures converted amorphous Fe(III) oxyhydroxide into magnetite, which was characterized by X-ray diffraction, transmission electron microscopy, and magnetic measurements. The conversion of solid Fe(III) phases to soluble Fe(II) and/or magnetite is characteristic of DIRM cultures. The presence of DIRMs in the sediments of the Doce River and tributaries points to the possibility of reductive dissolution of goethite (α-FeOOH) and/or hematite (α-Fe2O3) from sediments, along with the consumption of organics, release of trace elements, and impairment of water quality.

Synthesis and Characterization of ZIF-8 Mixed Matrix Membranes

2014 ◽  
Vol 625 ◽  
pp. 661-664
Author(s):  
Chen Chuang Lok ◽  
Yin Fong Yeong
Keyword(s):  
Room Temperature ◽  
Synthesis Method ◽  
Mixed Matrix Membranes ◽  
Inorganic Filler ◽  
X Ray Diffraction ◽  
Mixed Matrix ◽  
Temperature Synthesis ◽  
X Ray ◽  
Matrix Membranes

In the present work, ZIF-8/6FDA-durene mixed matrix membranes (MMMs) were synthesized and characterized. ZIF-8 nanocrystals, which were used as the inorganic filler, were synthesized using rapid room-temperature synthesis method whereas 6FDA-durene polyimide was synthesized by polycondensation method followed by chemical imidization. Pure and 6FDA-durene membranes loaded with 5 wt%, 10 wt% and 15 wt% of ZIF-8 were fabricated. The structural properties and morphology of the resultant membranes were characterized by using X-ray Diffraction (XRD) and Field emission scanning electron microscope (FESEM) . The EDX images showed that ZIF-8 particles agglomerated in the polymer matrix. However, no phase separation was observed for all resultant MMMs.

scholarly journals Structural and optical properties of SnO2–Al2O3 nanocomposite synthesized via sol-gel route

2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Properties ◽  
Sol Gel ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Scanning Electron

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document