Synthesis of ZnO/Au Nanorods for Self Cleaning Applications

2021 ◽  
Vol 21 (4) ◽  
pp. 2621-2625
Author(s):  
Thi Ha Tran ◽  
Thi Huyen Trang Nguyen ◽  
Manh Hong Nguyen ◽  
Nguyen Hai Pham ◽  
An Bang Ngac ◽  
...  
Keyword(s):  
Electrode Materials ◽  
Sol Gel ◽  
Zno Nanorods ◽  
Chemical Vapor ◽  
Counter Electrodes ◽  
Sem Images ◽  
Uniform Size ◽  
High Efficient ◽  
Direct Band ◽  
Low Dimensional

Zinc oxide (ZnO) is a well-known semiconductor with valuable characteristics: wide direct band gap of ˜3.3 eV, large exciton binding energy of 60 meV at room temperature, high efficient photocatalyst, etc. which have been applied in many fields such as optical devices (LEDs, laser), solar cells and sensors. Besides, various low dimensional structures of ZnO in terms of nanoparticles, nanorods, nanoneedles, nanotetrapods find applications in technology and life. This material is also appealing due to the diversity of available processing methods including both chemical and physical approaches such as: hydrothermal, sol–gel, chemical vapor deposition and sputtering. In this report, ZnO nanorods are prepared by hydrothermal method assisted with galvanic-cell effect. The effect of counter electrode materials on the morphology and structure of obtained product was studied. Scanning electron microscopy (SEM) images of the product showed that counter electrodes made of aluminum offers nanorods of higher quality than other materials in terms of uniform size, high density and good preferred orientation. The as-prepared nanorods were then sputtered with gold (Au). ZnO/Au nanostructures show excellent photocatalyst activities which were demonstrated by complete photodegradation of methylene blue (Mb) under UV irradiation and high decomposition rate k of 0.011 min-1.

Preparation and Characterization of Transparent Electrodes Based on CNT-s Doped Metal Oxides

2011 ◽  
Vol 324 ◽  
pp. 133-136
Author(s):  
Madis Paalo ◽  
Tanel Tätte ◽  
Eugene Shulga ◽  
Madis Lobjakas ◽  
Aare Floren ◽  
...  
Keyword(s):  
Metal Oxides ◽  
Transition Metal Oxides ◽  
Electrode Materials ◽  
Sol Gel ◽  
Physical Stability ◽  
Chemical Vapor ◽  
Transparent Electrode ◽  
Electrical And Optical Properties ◽  
Materials Used

In the present work, it is shown that carbon nanotube-doped transition metal oxides are potential candidates for use as ceramic transparent electrode materials. Used carbon nanotubes (CNT-s) are synthesized by using chemical vapor deposition (CVD) method. Electrodes in shape of fibers are obtained via inexpensive and low temperature sol-gel method. Due to extraordinary electrical and optical properties of CNT-s and good chemical and physical stability of metal oxide ceramics, resulting composites could be an interesting subject for industry.

scholarly journals A Review of Supercapacitors: Materials Design, Modification, and Applications

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7779
Author(s):  
Muhammad Yaseen ◽  
Muhammad Arif Khan Khattak ◽  
Muhammad Humayun ◽  
Muhammad Usman ◽  
Syed Shaheen Shah ◽  
...  
Keyword(s):  
Energy Storage ◽  
Electrode Materials ◽  
In Situ Polymerization ◽  
Sol Gel ◽  
Chemical Vapor ◽  
Specific Power ◽  
Drying Methods ◽  
Design Modification ◽  
Hybrid Supercapacitors ◽  
Co Precipitation

Supercapacitors (SCs) have received much interest due to their enhanced electrochemical performance, superior cycling life, excellent specific power, and fast charging–discharging rate. The energy density of SCs is comparable to batteries; however, their power density and cyclability are higher by several orders of magnitude relative to batteries, making them a flexible and compromising energy storage alternative, provided a proper design and efficient materials are used. This review emphasizes various types of SCs, such as electrochemical double-layer capacitors, hybrid supercapacitors, and pseudo-supercapacitors. Furthermore, various synthesis strategies, including sol-gel, electro-polymerization, hydrothermal, co-precipitation, chemical vapor deposition, direct coating, vacuum filtration, de-alloying, microwave auxiliary, in situ polymerization, electro-spinning, silar, carbonization, dipping, and drying methods, are discussed. Furthermore, various functionalizations of SC electrode materials are summarized. In addition to their potential applications, brief insights into the recent advances and associated problems are provided, along with conclusions. This review is a noteworthy addition because of its simplicity and conciseness with regard to SCs, which can be helpful for researchers who are not directly involved in electrochemical energy storage.

Structural and Magnetic Properties of Cr- and Fe-Doped CeO2 Nanoparticles Prepared by Sol-Gel Method

2016 ◽  
Vol 848 ◽  
pp. 682-687 ◽  
Author(s):  
Sheng Hong Yang ◽  
Yue Li Zhang
Keyword(s):  
Crystal Structure ◽  
Magnetic Properties ◽  
Magnetic Measurements ◽  
Physical Property Measurement System ◽  
Sol Gel ◽  
Physical Property ◽  
Ferromagnetic Behavior ◽  
Sem Images ◽  
Uniform Size ◽  
Structural And Magnetic Properties

A study of the structural and magnetic properties of Cr-and Fe-doped CeO2 nanoparticles produced by the sol–gel-based method was undertaken. The crystal structure and phase, morphology, and magnetic properties of the sample were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy (Raman) and physical property measurement system (PPMS). XRD and Raman studied showed that Cr-and Fe-doped did not change CeO2 original cubic fluorite crystal structure, and no ferromagnetic secondary phase was observed. SEM images showed that Cr-and Fe-doped CeO2 nanoparticles were spherical, uniform size, and good dispersion. The particle size was about 20 nm. The magnetic measurements showed that the Cr-and Fe-doped CeO2 nanoparticles presented ferromagnetic behavior at 10 and 300 K, indicating the Curie temperature was above room temperature. The magnetization diminished with the increase of the temperature. The saturation magnetization and coercivity of Fe-doped CeO2 nanoparticles were higher than that of Cr-doped CeO2 nanoparticles. Combined with the results of XRD and Raman, the ferromagnetic behavior can be attributed to the intrinsic properties of Cr-and Fe-doped CeO2 nanostructures.

scholarly journals Blackbody-sensitive room-temperature infrared photodetectors based on low-dimensional tellurium grown by chemical vapor deposition

2021 ◽  
Vol 7 (16) ◽  
pp. eabf7358
Author(s):  
Meng Peng ◽  
Runzhang Xie ◽  
Zhen Wang ◽  
Peng Wang ◽  
Fang Wang ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Room Temperature ◽  
Spectral Response ◽  
Chemical Vapor ◽  
Hole Mobility ◽  
Infrared Detection ◽  
Infrared Photodetectors ◽  
Bandgap Semiconductors ◽  
Low Dimensional

Blackbody-sensitive room-temperature infrared detection is a notable development direction for future low-dimensional infrared photodetectors. However, because of the limitations of responsivity and spectral response range for low-dimensional narrow bandgap semiconductors, few low-dimensional infrared photodetectors exhibit blackbody sensitivity. Here, highly crystalline tellurium (Te) nanowires and two-dimensional nanosheets were synthesized by using chemical vapor deposition. The low-dimensional Te shows high hole mobility and broadband detection. The blackbody-sensitive infrared detection of Te devices was demonstrated. A high responsivity of 6650 A W−1 (at 1550-nm laser) and the blackbody responsivity of 5.19 A W−1 were achieved. High-resolution imaging based on Te photodetectors was successfully obtained. All the results suggest that the chemical vapor deposition–grown low-dimensional Te is one of the competitive candidates for sensitive focal-plane-array infrared photodetectors at room temperature.

Optical Properties and Zinc Nitride Thin Films Prepared Using Magnetron Reactive Sputtering

2014 ◽  
Vol 940 ◽  
pp. 11-15
Author(s):  
Jun Qin Feng ◽  
Jun Fang Chen
Keyword(s):  
Thin Films ◽  
Band Gap ◽  
Near Infrared ◽  
Fluorescence Emission ◽  
Emission Spectra ◽  
Sem Images ◽  
Fluorescence Emission Spectra ◽  
Glass Substrates ◽  
Zinc Nitride ◽  
Direct Band

Zinc nitride films were deposited by ion sources-assisted magnetron sputtering with the use of Zn target (99.99% purity) on 7059 glass substrates. The films were characterized by XRD, SEM and EDS, the results of which show that the polycrystalline zinc nitride thin film can be grown on the glass substrates, the EDS spectrum confirmed the chemical composition of the films and the SEM images revealed that the zinc nitride thin films have a dense structure. Ultraviolet-visible-near infrared spectrophotometer was used to study the transmittance behaviors of zinc nitride thin films, which calculated the optical band gap by Davis Mott model. The results of the fluorescence emission spectra show the zinc nitride would be a direct band gap semiconductor material.

scholarly journals Synthesis, Structural, Morphological and Thermal Characterization of Five Different Silica-Polyethylene Glycol-Chlorogenic Acid Hybrid Materials

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1586
Author(s):  
Michelina Catauro ◽  
Pavel Šiler ◽  
Jiří Másilko ◽  
Roberta Risoluti ◽  
Stefano Vecchio Ciprioti
Keyword(s):  
Polyethylene Glycol ◽  
Chlorogenic Acid ◽  
Hybrid Materials ◽  
Sol Gel ◽  
Antibacterial Properties ◽  
Silica Matrix ◽  
Sem Images ◽  
Fixed Amount ◽  
Organic Components ◽  
Free Material

The present study investigated the structure, morphology, thermal behavior, and bacterial growth analysis of novel three-component hybrid materials synthesized by the sol-gel method. The inorganic silica matrix was weakly bonded to the network of two organic components: a well-known polymer such as polyethylene glycol (PEG, average molar mass of about 4000 g/mol), and an antioxidant constituted by chlorogenic acid (CGA). In particular, a first series was made by a 50 wt% PEG-based (CGA-free) silica hybrid along with two 50 wt% PEG-based hybrids containing 10 and 20 wt% of CGA (denoted as SP50, SP50C10 and SP50C20, respectively). A second series contained a fixed amount of CGA (20 wt%) in silica-based hybrids: one was the PEG-free material (SC20) and the other two contained 12 and 50 wt% of PEG, respectively (SP12C20 and SP50C20, respectively), being the latter already included in the first series. The X-ray diffraction (XRD) patterns and scanning electron microscope (SEM) images of freshly prepared materials confirmed that all the materials were amorphous and homogeneous regardless of the content of PEG or CGA. The thermogravimetric (TG) analysis revealed a higher water content was adsorbed into the two component hybrids (SP50 and SC20) because of the availability of a larger number of H-bonds to be formed with water with respect to those of silica/PEG/CGA (SPC), where silica matrix was involved in these bonds with both organic components. Conversely, the PEG-rich materials (SP50C10 and SP50C20, both with 50 wt% of the polymer) retained a lower content of water. Decomposition of PEG and CGA occurred in almost the same temperature interval regardless of the content of each organic component. The antibacterial properties of the SiO2/PEG/CGA hybrid materials were studied in pellets using either Escherichia coli and Enterococcus faecalis, respectively. Excellent antibacterial activity was found against both bacteria regardless of the amount of polymer in the hybrids.

ZnO nanorods decorated with metal sulfides as stable and efficient counter-electrode materials for high-efficiency quantum dot-sensitized solar cells

2016 ◽  
Vol 4 (21) ◽  
pp. 8161-8171 ◽  
Author(s):  
Chandu V. V. M. Gopi ◽  
Mallineni Venkata-Haritha ◽  
Young-Seok Lee ◽  
Hee-Je Kim
Keyword(s):  
Solar Cells ◽  
Quantum Dot ◽  
Counter Electrode ◽  
Electrode Materials ◽  
High Efficiency ◽  
Zno Nanorods ◽  
Metal Sulfide ◽  
Metal Sulfides ◽  
Sensitized Solar Cells

Metal sulfide decorated with ZnO NRs (ZnO/CoS, ZnO/NiS, ZnO/CuS and ZnO/PbS) were fabricated and used as efficient CEs for QDSSCs.

Synthesis, Characterization and Properties of PANI/(La-Nd Doped BaFe12O19) Composites

2017 ◽  
Vol 727 ◽  
pp. 327-334
Author(s):  
Yan Wang ◽  
Jun Wang ◽  
Xiao Fei Zhang ◽  
Ya Qing Liu
Keyword(s):  
Sol Gel ◽  
Network Analyzer ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Structure Morphology ◽  
Xrd Patterns ◽  
Hexagonal Platelet ◽  
Peak Value ◽  
Properties Of Composites

La-Nd co-doped barium hexaferrites, Ba0.7(LamNdn)0.3Fe12O19 (D-BaM), were successfully prepared by sol-gel method. PANI / D-BaM composites were synthesized by in-situ polymerization in solution. The structure, morphology and properties of samples have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), four-probe conductivity tester and vector network analyzer. The XRD patterns showed that the crystal structure of all the samples exist as M-type phases. The SEM images revealed that the particles presented a hexagonal platelet-like morphology. The magnetic properties could be improved by substitutions of La and Nd ions. The saturation magnetization (Ms) and coercive force (Hc) increased with the change of La / Nd ratio to the maximum at La / Nd = 3:1. The doped particles have also been embedded in conductive PANI to prepare electromagnetic materials, and the conductivity kept on the order of 10-2. The microwave absorbing properties of composites at 30 MHz-6 GHz improved obviously, the peak value of reflection loss could reach-7.5 dB.

Sign in / Sign up

Export Citation Format

Share Document