scholarly journals Assessment of Tropical Forest Degradation with Canopy Fractional Cover from Landsat ETM+ and IKONOS Imagery

2005 ◽  
Vol 9 (22) ◽  
pp. 1-18 ◽  
Author(s):  
Cuizhen Wang ◽  
Jiaguo Qi ◽  
Mark Cochrane
Keyword(s):  
Tropical Forests ◽  
Forest Canopy ◽  
Vegetation Index ◽  
Forest Degradation ◽  
Selective Logging ◽  
Area Index ◽  
Mato Grosso ◽  
Clear Cut ◽  
Fractional Cover ◽  
Linear Mixture Model

Abstract Tropical forests are being subjected to a wide array of disturbances in addition to outright deforestation. Selective logging is one of the most common disturbances ongoing in the Amazon, which results in significant changes in forest structure and canopy integrity. Assessing forest canopy fractional cover (fc) is one way of measuring forest degradation caused by selective logging. In this study we applied a linear mixture model to a vegetation index domain to map canopy fractional cover in tropical forests in the Amazonian state of Mato Grosso, Brazil. The modified soil adjusted vegetation index (MSAVI) was selected as the optimal vegetation index in the model because it is most linearly related to green canopy abundance up to leaf area index = 4.0. In the canopy fc map derived from the Landsat Enhanced Thematic Mapper Plus (ETM+) image, the fc distribution ranged from 0 to 0.4 in clear-cut areas, higher than 0.8 in undisturbed forests, and a wider range of 0.3–1.0 in degraded forests. The fc map was validated with the 1-m panchromatic sharpened IKONOS image. In the logged forests the ETM+ estimated fc values were clustered along the 1:1 line in the scatterplot with the IKONOS estimated fc and had a squared correlation coefficient (R2) of 0.8.

scholarly journals ASSESSMENT OF MANGROVE FOREST DEGRADATION THROUGH CANOPY FRACTIONAL COVER IN KARIMUNJAWA ISLAND, CENTRAL JAVA, INDONESIA

2016 ◽  
Vol 3 (2) ◽  
pp. 107 ◽  
Author(s):  
Muhammad Kamal ◽  
Hartono Hartono ◽  
Pramaditya Wicaksono ◽  
Novi Susetyo Adi ◽  
Sanjiwana Arjasakusuma
Keyword(s):  
Mangrove Forest ◽  
Forest Canopy ◽  
Vegetation Index ◽  
Spectral Response ◽  
Empirical Relationship ◽  
Forest Degradation ◽  
Empirical Method ◽  
Estimation Accuracy ◽  
Fractional Cover ◽  
Semi Empirical

The Karimunjawa Islands mangrove forest has been subjected to various direct and indirect human disturbances in the recent years. If not properly managed, this disturbance will lead to the degradation of mangrove habitat health. Assessing forest canopy fractional cover (fc) using remote sensing data is one way of measuring mangrove forest degradation. This study aims to (1) estimate the forest canopy fc using a semi-empirical method, (2) assess the accuracy of the fc estimation and (3) create mangrove forest degradation from the canopy fc results. A sample set of in-situ fc was collected using the hemispherical camera for model development and accuracy assessment purposes. We developed semi-empirical relationship models between pixel values of ALOS AVNIR-2 image (10m pixel size) and field fc, using Enhanced Vegetation Index (EVI) as a proxy of the image spectral response. The results show that the EVI provides reasonable estimation accuracy of mangrove canopy fc in Karimunjawa Island with the values ranged from 0.17 to 0.96 (n = 69). The low fc values correspond to vegetation opening and gaps caused by human activities or mangrove dieback. The high fc values correspond to the healthy and dense mangrove stands, especially the Rhizophora sp formation at the seafront. The results of this research justify the use of simple canopy fractional cover model for assessing the mangrove forest degradation status in the study area. Further research is needed to test the applicability of this approach at different sites.

scholarly journals Detecting Forest Degradation in the Three-North Forest Shelterbelt in China from Multi-Scale Satellite Images

2021 ◽  
Vol 13 (6) ◽  
pp. 1131
Author(s):  
Tao Yu ◽  
Pengju Liu ◽  
Qiang Zhang ◽  
Yi Ren ◽  
Jingning Yao
Keyword(s):  
Remote Sensing ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Net Primary Production ◽  
Remote Sensing Data ◽  
Forest Degradation ◽  
Observation Data ◽  
Area Index ◽  
Sensing Data ◽  
Multi Scale

Detecting forest degradation from satellite observation data is of great significance in revealing the process of decreasing forest quality and giving a better understanding of regional or global carbon emissions and their feedbacks with climate changes. In this paper, a quick and applicable approach was developed for monitoring forest degradation in the Three-North Forest Shelterbelt in China from multi-scale remote sensing data. Firstly, Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Ratio Vegetation Index (RVI), Leaf Area Index (LAI), Fraction of Photosynthetically Active Radiation (FPAR) and Net Primary Production (NPP) from remote sensing data were selected as the indicators to describe forest degradation. Then multi-scale forest degradation maps were obtained by adopting a new classification method using time series MODerate Resolution Imaging Spectroradiometer (MODIS) and Landsat Enhanced Thematic Mapper Plus (ETM+) images, and were validated with ground survey data. At last, the criteria and indicators for monitoring forest degradation from remote sensing data were discussed, and the uncertainly of the method was analyzed. Results of this paper indicated that multi-scale remote sensing data have great potential in detecting regional forest degradation.

scholarly journals Long-Term Impacts of Selective Logging on Amazon Forest Dynamics from Multi-Temporal Airborne LiDAR

2019 ◽  
Vol 11 (6) ◽  
pp. 709 ◽  
Author(s):  
Ekena Rangel Pinagé ◽  
Michael Keller ◽  
Paul Duffy ◽  
Marcos Longo ◽  
Maiza dos-Santos ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Forest Canopy ◽  
Binary Classification ◽  
Forest Degradation ◽  
Selective Logging ◽  
Ecological Impacts ◽  
Airborne Lidar ◽  
Classification Model ◽  
Amazon Forest ◽  
Gap Formation

Forest degradation is common in tropical landscapes, but estimates of the extent and duration of degradation impacts are highly uncertain. In particular, selective logging is a form of forest degradation that alters canopy structure and function, with persistent ecological impacts following forest harvest. In this study, we employed airborne laser scanning in 2012 and 2014 to estimate three-dimensional changes in the forest canopy and understory structure and aboveground biomass following reduced-impact selective logging in a site in Eastern Amazon. Also, we developed a binary classification model to distinguish intact versus logged forests. We found that canopy gap frequency was significantly higher in logged versus intact forests even after 8 years (the time span of our study). In contrast, the understory of logged areas could not be distinguished from the understory of intact forests after 6–7 years of logging activities. Measuring new gap formation between LiDAR acquisitions in 2012 and 2014, we showed rates 2 to 7 times higher in logged areas compared to intact forests. New gaps were spatially clumped with 76 to 89% of new gaps within 5 m of prior logging damage. The biomass dynamics in areas logged between the two LiDAR acquisitions was clearly detected with an average estimated loss of −4.14 ± 0.76 MgC ha−1 y−1. In areas recovering from logging prior to the first acquisition, we estimated biomass gains close to zero. Together, our findings unravel the magnitude and duration of delayed impacts of selective logging in forest structural attributes, confirm the high potential of airborne LiDAR multitemporal data to characterize forest degradation in the tropics, and present a novel approach to forest classification using LiDAR data.

scholarly journals Comparison of Modeling Algorithms for Forest Canopy Structures Based on UAV-LiDAR: A Case Study in Tropical China

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1324
Author(s):  
Xi Peng ◽  
Anjiu Zhao ◽  
Yongfu Chen ◽  
Qiao Chen ◽  
Haodong Liu ◽  
...  
Keyword(s):  
Tropical Forests ◽  
Laser Scanning ◽  
Forest Canopy ◽  
Sustainable Forest Management ◽  
Mean Squared Error ◽  
Structural Parameters ◽  
Recursive Feature Elimination ◽  
Support Vector ◽  
Lidar Data ◽  
Area Index

Knowledge of forest structure is vital for sustainable forest management decisions. Terrestrial laser scanning cannot describe the canopy trees in a large area, and it is unclear whether unmanned aerial vehicle-light detection and ranging (UAV-LiDAR) data have the ability to capture the forest canopy structural parameters in tropical forests. In this study, we estimated five forest canopy structures (stand density (N), basic area (G), above-ground biomass (AGB), Lorey’s mean height (HL), and under-crown height (hT)) with four modeling algorithms (linear regression (LR), bagged tree (BT), support vector regression (SVR), and random forest (RF)) based on UAV-LiDAR data and 60 sample plot data from tropical forests in Hainan and determined the optimal algorithms for the five canopy structures by comparing the performance of the four algorithms. First, we defined the canopy tree as a tree with a height ≥70% HL. Then, UAV-LiDAR metrics were calculated, and the LiDAR metrics were screened by recursive feature elimination (RFE). Finally, a prediction model of the five forest canopy structural parameters was established by the four algorithms, and the results were compared. The metrics’ screening results show that the most important LiDAR indexes for estimating HL, AGB, and hT are the leaf area index and some height metrics, while the most important indexes for estimating N and G are the kurtosis of heights and the coefficient of variation of height. The relative root mean squared error (rRMSE) of five structure parameters showed the following: when modeling HL, the rRMSEs (10.60%–12.05%) obtained by the four algorithms showed little difference; when N was modeled, BT, RF, and SVR had lower rRMSEs (26.76%–27.44%); when G was modeled, the rRMSEs of RF and SVR (15.37%–15.87%) were lower; when hT was modeled, BT, RF, and SVR had lower rRMSEs (10.24%–11.07%); when AGB was modeled, RF had the lowest rRMSE (26.75%). Our results will help facilitate choosing LiDAR indexes and modeling algorithms for tropical forest resource inventories.

scholarly journals Challenges in Estimating Tropical Forest Canopy Height from Planet Dove Imagery

2020 ◽  
Vol 12 (7) ◽  
pp. 1160 ◽  
Author(s):  
Ovidiu Csillik ◽  
Pramukta Kumar ◽  
Gregory P. Asner
Keyword(s):  
Tropical Forests ◽  
Spatial Resolution ◽  
Large Scale ◽  
Forest Canopy ◽  
Satellite Image ◽  
Spectral Projection ◽  
Forest Degradation ◽  
Canopy Height ◽  
Textural Features ◽  
Conservation Actions

Monitoring tropical forests using spaceborne and airborne remote sensing capabilities is important for informing environmental policies and conservation actions. Developing large-scale machine learning estimation models of forest structure is instrumental in bridging the gap between retrospective analysis and near-real-time monitoring. However, most approaches use moderate spatial resolution satellite data with limited capabilities of frequent updating. Here, we take advantage of the high spatial and temporal resolutions of Planet Dove images and aim to automatically estimate top-of-canopy height (TCH) for the biologically diverse country of Peru from satellite imagery at 1 ha spatial resolution by building a model that associates Planet Dove textural features with airborne light detection and ranging (LiDAR) measurements of TCH. We use and modify features derived from Fourier textural ordination (FOTO) of Planet Dove images using spectral projection and train a gradient boosted regression for TCH estimation. We discuss the technical and scientific challenges involved in the generation of reliable mechanisms for estimating TCH from Planet Dove satellite image spectral and textural features. Our developed software toolchain is a robust and generalizable regression model that provides a root mean square error (RMSE) of 4.36 m for Peru. This represents a helpful advancement towards better monitoring of tropical forests and improves efforts in reducing emissions from deforestation and forest degradation (REDD+), an important climate change mitigation approach.

scholarly journals Forest Degradation Assessment Based on Trend Analysis of MODIS-Leaf Area Index: A Case Study in Mexico

2019 ◽  
Vol 11 (21) ◽  
pp. 2503 ◽  
Author(s):  
Reygadas ◽  
Jensen ◽  
Moisen
Keyword(s):  
Time Series ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Vegetation Index ◽  
Forest Type ◽  
Forest Degradation ◽  
Future Research ◽  
Type Model ◽  
Area Index ◽  
Trend Component

: Assessing forest degradation has been a challenging task due to the generally slow-changing nature of the process, which demands long periods of observation and high frequency of records. This research contributes to efforts aimed at detecting forest degradation by analyzing the trend component of the time series of Leaf Area Index (LAI) collected by the Moderate Resolution Imaging Spectroradiometer (MODIS) over Central Mexico from 2002 to 2017. The analysis of the trend component is proposed to overcome the challenge of identifying very subtle and gradual changes that can be undetected if only the raw time series is examined. Additionally, the use of LAI as an alternative to other widely used indexes (e.g., Normalize Difference Vegetation Index and Enhanced Vegetation Index) facilitates consideration of the structural changes evident from degradation though not necessarily observable with spectral indices. Overall, results indicate that 52% of the study area has experienced positive trends of vegetation change (i.e., increasing LAI), 37% has remained unchanged, and 11% exhibits some level of forest degradation. Particularly, the algorithm estimated that 0.6% (385 km2) is highly degraded, 5.3% (3406 km2) moderately degraded, and 5.1% (3245 km2) slightly degraded. Most of the moderate and highly degraded areas are distributed over the east side of the study area and evergreen broadleaf appears to be the most affected forest type. Model validation resulted an accuracy of 63%. Some actions to improve this accuracy are suggested, but also a different approach to validate this type of study is suggested as an area of opportunity for future research.

scholarly journals Combining Sentinel-1 and Landsat 8 Does Not Improve Classification Accuracy of Tropical Selective Logging

2022 ◽  
Vol 14 (1) ◽  
pp. 179
Author(s):  
Matthew G. Hethcoat ◽  
João M. B. Carreiras ◽  
Robert G. Bryant ◽  
Shaun Quegan ◽  
David P. Edwards
Keyword(s):  
Tropical Forests ◽  
Classification Accuracy ◽  
Biological Diversity ◽  
Forest Degradation ◽  
Climate Impacts ◽  
Selective Logging ◽  
Wood Products ◽  
Optical Data ◽  
Landsat 8 ◽  
Sar Data

Tropical forests play a key role in the global carbon and hydrological cycles, maintaining biological diversity, slowing climate change, and supporting the global economy and local livelihoods. Yet, rapidly growing populations are driving continued degradation of tropical forests to supply wood products. The United Nations (UN) has developed the Reducing Emissions from Deforestation and Forest Degradation (REDD+) programme to mitigate climate impacts and biodiversity losses through improved forest management. Consistent and reliable systems are still needed to monitor tropical forests at large scales, however, degradation has largely been left out of most REDD+ reporting given the lack of effective monitoring and countries mainly focus on deforestation. Recent advances in combining optical data and Synthetic Aperture Radar (SAR) data have shown promise for improved ability to monitor forest losses, but it remains unclear if similar improvements could be made in detecting and mapping forest degradation. We used detailed selective logging records from three lowland tropical forest regions in the Brazilian Amazon to test the effectiveness of combining Landsat 8 and Sentinel-1 for selective logging detection. We built Random Forest models to classify pixel-based differences in logged and unlogged regions to understand if combining optical and SAR improved the detection capabilities over optical data alone. We found that the classification accuracy of models utilizing optical data from Landsat 8 alone were slightly higher than models that combined Sentinel-1 and Landsat 8. In general, detection of selective logging was high with both optical only and optical-SAR combined models, but our results show that the optical data was dominating the predictive performance and adding SAR data introduced noise, lowering the detection of selective logging. While we have shown limited capabilities with C-band SAR, the anticipated opening of the ALOS-PALSAR archives and the anticipated launch of NISAR and BIOMASS in 2023 should stimulate research investigating similar methods to understand if longer wavelength SAR might improve classification of areas affected by selective logging when combined with optical data.

scholarly journals Corn Nitrogen Status Diagnosis with an Innovative Multi-Parameter Crop Circle Phenom Sensing System

2021 ◽  
Vol 13 (3) ◽  
pp. 401
Author(s):  
Cadan Cummings ◽  
Yuxin Miao ◽  
Gabriel Dias Paiao ◽  
Shujiang Kang ◽  
Fabián G. Fernández
Keyword(s):  
Machine Learning ◽  
Chlorophyll Content ◽  
Vegetation Index ◽  
Soil Drainage ◽  
Management Information ◽  
Area Index ◽  
Sensing System ◽  
Extreme Gradient Boosting ◽  
Split Plot ◽  
N Status

Accurate and non-destructive in-season crop nitrogen (N) status diagnosis is important for the success of precision N management (PNM). Several active canopy sensors (ACS) with two or three spectral wavebands have been used for this purpose. The Crop Circle Phenom sensor is a new integrated multi-parameter proximal ACS system for in-field plant phenomics with the capability to measure reflectance, structural, and climatic attributes. The objective of this study was to evaluate this multi-parameter Crop Circle Phenom sensing system for in-season diagnosis of corn (Zea mays L.) N status across different soil drainage and tillage systems under variable N supply conditions. The four plant metrics used to approximate in-season N status consist of aboveground biomass (AGB), plant N concentration (PNC), plant N uptake (PNU), and N nutrition index (NNI). A field experiment was conducted in Wells, Minnesota during the 2018 and the 2019 growing seasons with a split-split plot design replicated four times with soil drainage (drained and undrained) as main block, tillage (conventional, no-till, and strip-till) as split plot, and pre-plant N (PPN) rate (0 to 225 in 45 kg ha−1 increment) as the split-split plot. Crop Circle Phenom measurements alongside destructive whole plant samples were collected at V8 +/−1 growth stage. Proximal sensor metrics were used to construct regression models to estimate N status indicators using simple regression (SR) and eXtreme Gradient Boosting (XGB) models. The sensor derived indices tested included normalized difference vegetation index (NDVI), normalized difference red edge (NDRE), estimated canopy chlorophyll content (eCCC), estimated leaf area index (eLAI), ratio vegetation index (RVI), canopy chlorophyll content index (CCCI), fractional photosynthetically active radiation (fPAR), and canopy and air temperature difference (ΔTemp). Management practices such as drainage, tillage, and PPN rate were also included to determine the potential improvement in corn N status diagnosis. Three of the four replicated drained and undrained blocks were randomly selected as training data, and the remaining drained and undrained blocks were used as testing data. The results indicated that SR modeling using NDVI would be sufficient for estimating AGB compared to more complex machine learning methods. Conversely, PNC, PNU, and NNI all benefitted from XGB modeling based on multiple inputs. Among different approaches of XGB modeling, combining management information and Crop Circle Phenom measurements together increased model performance for predicting each of the four plant N metrics compared with solely using sensing data. The PPN rate was the most important management metric for all models compared to drainage and tillage information. Combining Crop Circle Phenom sensor parameters and management information is a promising strategy for in-season diagnosis of corn N status. More studies are needed to further evaluate this new integrated sensing system under diverse on-farm conditions and to test other machine learning models.

scholarly journals UAV Based Estimation of Forest Leaf Area Index (LAI) through Oblique Photogrammetry

2021 ◽  
Vol 13 (4) ◽  
pp. 803
Author(s):  
Lingchen Lin ◽  
Kunyong Yu ◽  
Xiong Yao ◽  
Yangbo Deng ◽  
Zhenbang Hao ◽  
...  
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Point Cloud ◽  
Forest Canopy ◽  
Estimation Method ◽  
Vertical Direction ◽  
Estimation Accuracy ◽  
3D Point Cloud ◽  
Area Index ◽  
Better Than

As a key canopy structure parameter, the estimation method of the Leaf Area Index (LAI) has always attracted attention. To explore a potential method to estimate forest LAI from 3D point cloud at low cost, we took photos from different angles of the drone and set five schemes (O (0°), T15 (15°), T30 (30°), OT15 (0° and 15°) and OT30 (0° and 30°)), which were used to reconstruct 3D point cloud of forest canopy based on photogrammetry. Subsequently, the LAI values and the leaf area distribution in the vertical direction derived from five schemes were calculated based on the voxelized model. Our results show that the serious lack of leaf area in the middle and lower layers determines that the LAI estimate of O is inaccurate. For oblique photogrammetry, schemes with 30° photos always provided better LAI estimates than schemes with 15° photos (T30 better than T15, OT30 better than OT15), mainly reflected in the lower part of the canopy, which is particularly obvious in low-LAI areas. The overall structure of the single-tilt angle scheme (T15, T30) was relatively complete, but the rough point cloud details could not reflect the actual situation of LAI well. Multi-angle schemes (OT15, OT30) provided excellent leaf area estimation (OT15: R2 = 0.8225, RMSE = 0.3334 m2/m2; OT30: R2 = 0.9119, RMSE = 0.1790 m2/m2). OT30 provided the best LAI estimation accuracy at a sub-voxel size of 0.09 m and the best checkpoint accuracy (OT30: RMSE [H] = 0.2917 m, RMSE [V] = 0.1797 m). The results highlight that coupling oblique photography and nadiral photography can be an effective solution to estimate forest LAI.

scholarly journals Bulk Drag Predictions of Riparian Arundo donax Stands through UAV-Acquired Multispectral Images

Water ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1333
Author(s):  
Giuseppe Francesco Cesare Lama ◽  
Mariano Crimaldi ◽  
Vittorio Pasquino ◽  
Roberta Padulano ◽  
Giovanni Battista Chirico
Keyword(s):  
Riparian Vegetation ◽  
Vegetation Index ◽  
Arundo Donax ◽  
Water Bodies ◽  
Giant Reed ◽  
Multispectral Images ◽  
Drainage Channel ◽  
Area Index ◽  
Riparian Plants ◽  
The Impact

Estimating the main hydrodynamic features of real vegetated water bodies is crucial to assure a balance between their hydraulic conveyance and environmental quality. Riparian vegetation stands have a high impact on vegetated channels. The present work has the aim to integrate riparian vegetation’s reflectance indices and hydrodynamics of real vegetated water flows to assess the impact of riparian vegetation morphometry on bulk drag coefficients distribution along an abandoned vegetated drainage channel fully covered by 9–10 m high Arundo donax (commonly known as giant reed) stands, starting from flow average velocities measurements at 30 cross-sections identified along the channel. A map of riparian vegetation cover was obtained through digital processing of Unnamed Aerial Vehicle (UAV)-acquired multispectral images, which represent a fast way to observe riparian plants’ traits in hardly accessible areas such as vegetated water bodies in natural conditions. In this study, the portion of riparian plants effectively interacting with flow was expressed in terms of ground-based Leaf Area Index measurements (LAI), which easily related to UAV-based Normalized Difference Vegetation Index (NDVI). The comparative analysis between Arundo donax stands NDVI and LAI map enabled the analysis of the impact of UAV-acquired multispectral imagery on bulk drag predictions along the vegetated drainage channel.

Sign in / Sign up

Export Citation Format

Share Document