scholarly journals Thermodynamic study of the interactions of salicylic acid and granular activated carbon in solution at different pHs

2017 ◽  
Vol 36 (3-4) ◽  
pp. 833-850 ◽  
Author(s):  
Valentina Bernal ◽  
Liliana Giraldo ◽  
Juan C Moreno-Piraján
Keyword(s):  
Salicylic Acid ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Activated Carbons ◽  
Granular Activated Carbon ◽  
Molecular Size ◽  
Carbon Surface ◽  
Immersion Enthalpy ◽  
Inappropriate Use

The inappropriate use of pain medication has led to the appearance of salicylic acid molecules (aspirin’s metabolite excretion) in surface water, which causes problems for the environment. The adsorption process using activated carbon is one of the processes that is used for the removal of organic compounds present in the aqueous phase; however, the percentage of removal depends on the physicochemical properties of the adsorbent and the adsorbate such as: pore size, surface area, surface chemistry, molecular size and solubility. In this work, we have studied the adsorbent–adsorbate interactions through the determination of the immersion enthalpy of the activated carbon in salicylic acid aqueous solutions; due to the solute and activated carbon surface have functional groups capable of ionized with the pH, the adsorption study was carried out at pH 2, 7, and 11. The activated carbons selected for the study were a granular activated carbon and a reduced activated carbon to 1173 K; as the immersion liquid were used salicylic acid aqueous solutions with concentrations between 0.072 mmol/ l and 0.72 mmol/ l, the solutions at pH 2 and 11 were prepared with HCl and NaOH solutions, respectively. It was determined that the immersion enthalpy is between −7.39 J /g and −22.5 J/g for the reduced activated carbon and between −7.63 J/g and −16.73 J/g for the granular activated carbon.

scholarly journals Immersion Enthalpy of Activated Carbon–Cyclohexane and Activated Carbon–Hexane. Difference in the Solid–Liquid Interaction Enthalpy Due to the Structure of the Solvent

Processes ◽  
2019 ◽  
Vol 7 (4) ◽  
pp. 180
Author(s):  
Diana Hernández-Monje ◽  
Liliana Giraldo ◽  
Juan Moreno-Piraján
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Molecular Size ◽  
Liquid System ◽  
Micropore Volume ◽  
Immersion Enthalpy ◽  
Molecular Arrangement ◽  
The Difference ◽  
Enthalpy Of Immersion ◽  
Solid Liquid

The enthalpy of immersion for five activated carbons (with different surface chemistry) in cyclohexane and hexane was determined in order to observe the intensity of the solid–liquid interaction. The enthalpy of immersion was related to the properties of activated carbons, such as micropore volume, total basic groups content, and the EoWo product, that characterized each solid-liquid system. The values for the immersion enthalpy were between −21.2 and −91.7 J g−1 for cyclohexane and between −16.4 and −66.1 J g−1 for hexane. It showed greater interaction between the cyclohexane and the activated carbons and it was related to the properties of this adsorbate, such as molecular size and molecular arrangement. The difference in the enthalpy of immersion between the solvents per unit of micropore volume for the set of activated carbons was calculated obtaining a value of −487 J cm−3.

Adsorption of Salicylic Acid from Aqueous Solutions on Microporous Granular Activated Carbon

2021 ◽  
Vol 55 (2) ◽  
pp. 117-122
Author(s):  
A. K. Rakishev ◽  
M. D. Vedenyapina ◽  
S. A. Kulaishin ◽  
D. V. Kurilov
Keyword(s):  
Salicylic Acid ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Granular Activated Carbon

scholarly journals Effect of textural and chemical characteristics of activated carbons on phenol adsorption in aqueous solutions

2017 ◽  
Vol 19 (4) ◽  
pp. 87-93 ◽  
Author(s):  
Diana P. Vargas ◽  
Liliana Giraldo ◽  
Juan Carlos Moreno-Piraján
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Surface Area ◽  
Pore Volume ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Chemical Properties ◽  
Granular Activated Carbon ◽  
Bet Surface Area ◽  
Phenol Adsorption

Abstract The effect of textural and chemical properties such as: surface area, pore volume and chemical groups content of the granular activated carbon and monoliths on phenol adsorption in aqueous solutions was studied. Granular activated carbon and monolith samples were produced by chemical activation. They were characterized by using N2 adsorption at 77 K, CO2 adsorption at 273 K, Boehm Titrations and immersion calorimetry in phenol solutions. Microporous materials with different pore size distribution, surface area between 516 and 1685 m2 g−1 and pore volumes between 0.24 and 0.58 cm3 g−1 were obtained. Phenol adsorption capacity of the activated carbon materials increased with increasing BET surface area and pore volume, and is favored by their surface functional groups that act as electron donors. Phenol adsorption capacities are in ranged between 73.5 and 389.4 mg · g−1.

scholarly journals The influence of active carbon contaminants on the ozonation mechanism interpretation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lilla Fijołek ◽  
Joanna Świetlik ◽  
Marcin Frankowski
Keyword(s):  
Activated Carbon ◽  
Active Carbon ◽  
Alkali Metals ◽  
Activated Carbons ◽  
Carbon Surface ◽  
Bulk Solution ◽  
Ozone Decomposition ◽  
Reaction Products ◽  
Treatment Technology ◽  
Carbon Impurities

AbstractIn water treatment technology, activated carbons are used primarily as sorbents to remove organic impurities, mainly natural organic matter, but also as catalysts in the ozonation process. Commercially available activated carbons are usually contaminated with mineral substances, classified into two main groups: alkali metals (Ca, Na, K, Li, Mg) and multivalent metals (Al, Fe, Ti, Si). The presence of impurities on the carbon surface significantly affects the pHpzc values determined for raw and ozonated carbon as well as their acidity and alkalinity. The scale of the observed changes strongly depends on the pH of the ozonated system, which is related to the diffusion of impurities from the carbon to the solution. In an acidic environment (pH 2.5 in this work), the ozone molecule is relatively stable, yet active carbon causes its decomposition. This is the first report that indirectly indicates that contaminants on the surface of activated carbon (multivalent elements) contribute to the breakdown of ozone towards radicals, while the process of ozone decomposition by purified carbons does not follow the radical path in bulk solution. Carbon impurities also change the distribution of the reaction products formed by organic pollutants ozonation, which additionally confirms the radical process. The study showed that the use of unpurified activated carbon in the ozonation of succinic acid (SA) leads to the formation of a relatively large amount of oxalic acid (OA), which is a product of radical SA degradation. On the other hand, in solutions with purified carbon, the amount of OA generated is negligible.

scholarly journals Oxytetracycline Adsorption from Aqueous Solutions on Commercial and High-Temperature Modified Activated Carbons

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3481
Author(s):  
Joanna Lach ◽  
Agnieszka Ociepa-Kubicka ◽  
Maciej Mrowiec
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Activated Carbons ◽  
Electricity Consumption ◽  
Solution Ph ◽  
Carbon Modification ◽  
Modification Method ◽  
Flow Through ◽  
Proposed Modification ◽  
Modified Activated Carbons

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.

scholarly journals Adsorption of selected pharmaceuticals on activated carbons from water

2018 ◽  
Vol 44 ◽  
pp. 00089 ◽  
Author(s):  
Joanna Lach ◽  
Anna Szymonik ◽  
Agnieszka Ociepa-Kubicka
Keyword(s):  
Salicylic Acid ◽  
Activated Carbon ◽  
Surface Water ◽  
Correlation Coefficient ◽  
Activated Carbons ◽  
Kinetics Equation ◽  
Adsorption Efficiency ◽  
Adsorption From Solutions ◽  
Freundlich Equation ◽  
Treated Sewage

The possibility of using activated carbon for the removal of salicylic acid andiibuprofen sodium has been explored. These compounds are observed in crude and treated sewage and in surface water. The effect of pH on the adsorption efficiency was assessed. Tests were carried out from solutions with pH ranging from 2 to 10 (salicylic acid) and from 6 to 10 (iibuprofen sodium). It was found that the higher pH, the lower the adsorption of the compounds tested. Salicylic acid was most efficiently adsorbed from a solution with pH = 2, in which it occurred mainly in an undissociated form. The achieved efficiency of salicylic acid adsorption from solutions with pH=2 was 91%, while from those with pH=10, it was 55% (Co=4 mmol/L). The efficiency of removing ibuprofen sodium from the pH=6 solution was 64%, while from the pH = 10 solution, 60%.The adsorption of both salicylic acid and ibuprofen sodium follows the kinetics equation of the pseudo-2nd order. For the description of the adsorption isotherms, the Freundlich, Langmuir, Temkin and Dubibin-Radushkevich models were employed. The both compounds are described with the highest correlation coefficient in the case of the Freundlich equation.

scholarly journals Parabens Adsorption onto Activated Carbon: Relation with Chemical and Structural Properties

Molecules ◽  
2019 ◽  
Vol 24 (23) ◽  
pp. 4313 ◽  
Author(s):  
Astrid Roxanna Moreno-Marenco ◽  
Liliana Giraldo ◽  
Juan Carlos Moreno-Piraján
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Surface Area ◽  
Endocrine Disruptor ◽  
Emerging Contaminants ◽  
Activated Carbons ◽  
Elaeis Guineensis ◽  
Acid Sites ◽  
Co2 Atmosphere

Parabens (alkyl-p-hidroxybenzoates) are antimicrobial preservatives used in personal care products, classified as an endocrine disruptor, so they are considered emerging contaminants. A raw version of activated carbons obtained from African palm shell (Elaeis guineensis) modified chemically by impregnation with salts of CaCl2 (GC2), MgCl2 (GM2) and Cu(NO3)2 (GCu2) at 2% wt/v and carbonized in CO2 atmosphere at 1173 K was prepared. The process of adsorption of methyl (MePB) and ethylparaben (EtPB) from aqueous solution on the activated carbons at 18 °C was studied and related to the interactions between the adsorbate and the adsorbent, which can be quantified through the determination of immersion enthalpies in aqueous solutions of corresponding paraben, showing the lowest-value carbon GM2, which has a surface area of 608 m2 × g−1, while the highest values correspond to the activated carbon GCu2, with a surface area of 896 m2 × g−1 and the highest content of surface acid sites (0.42 mmol × g−1), such as lactonic and phenolic compounds, which indicates that the adsorbate–adsorbent interactions are favored by the presence of these, with interaction enthalpies that vary between 5.72 and 51.95 J × g−1 for MePB adsorption and 1.24 and 52.38 J × g−1 for EtPB adsorption showing that the process is endothermic.

scholarly journals Removal of Methylene Blue from Waste Water Using Activated Carbon Prepared from Rice Husk

2012 ◽  
Vol 60 (2) ◽  
pp. 185-189 ◽  
Author(s):  
Mohammad Arifur Rahman ◽  
S. M. Ruhul Amin ◽  
A. M. Shafiqul Alam
Keyword(s):  
Waste Water ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Rice Husk ◽  
Flow Rate ◽  
Activated Carbons ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Blue Dye

The possible utilization of rice husk activated carbon as an adsorbent for the removal of methylene blue dye from aqueous solutions has been investigated. In this study, activated carbons, prepared from low-cost rice husk by sulfuric acid and zinc chloride activation, were used as the adsorbent for the removal of methylene blue, a basic dye, from aqueous solutions. Effects of various experimental parameters, such as adsorbent dosage and particle size, initial dye concentration, pH and flow rate were investigated in column process. The maximum uptakes of methylene blue by activated rice husk carbon at optimized conditions (particle sizes: 140 ?m; Flow rate: 1.4 mL/min; pH: 10.0; initial volume of methylene blue: 50 mL and initial concentration of methylene blue: 4.0 mg/L etc.) were found to 97.15%. The results indicate that activated carbon of rice husk could be employed as low-cost alternatives to commercial activated carbon in waste water treatment for the removal of basic dyes. This low cost and effective removal method may provide a promising solution for the removal of crystal violet dye from wastewater.DOI: http://dx.doi.org/10.3329/dujs.v60i2.11491 Dhaka Univ. J. Sci. 60(2): 185-189, 2012 (July)

Sign in / Sign up

Export Citation Format

Share Document