Numerical study of the effect of geometric parameters on compressive mechanical properties of metallic lattice cylinders

2021 ◽  
pp. 095440622110590
Author(s):  
Amir Mahmoud Zanganeh ◽  
Sina Ghaemi Khiavi ◽  
Bagher Mohammad Sadeghi ◽  
Mehdi Divandari
Keyword(s):  
Mechanical Properties ◽  
Strain Distribution ◽  
Lattice Structure ◽  
Numerical Study ◽  
Effective Strain ◽  
Constant Strain Rate ◽  
Maximum Energy ◽  
Strut Thickness ◽  
Simulation Results ◽  
Abaqus Software

In the current research, the numerical simulations were done on 15 cylindrical lattice specimens under compressive stress at a constant strain rate using Abaqus software. The lattice cylinders have different strut thicknesses of 3, 4, and 5 mm, and with the fillets in the radiuses of 0.3, 0.6, 0.9, and 1.2 mm, respectively. The mechanical properties of the AlSi11Cu2 (Fe) aluminum alloy were used. The Mises stress distribution was evaluated to determine the effect of fillet radius on the lattice structure for the strut thickness of 3 mm. Also, the effective strain distribution of the lattice structure was investigated after different stages of deformation. After comparing the simulation results, it was shown that by applying fillets with a radius of 0.3 mm in lattice cylinders, the maximum energy absorption and maximum force can be achieved at the ultimate tensile strength (UTS) point. Also, the optimal strain can be obtained at the UTS point.

Numerical study of the mechanical deterioration of insulated rail joints

2008 ◽  
Vol 223 (3) ◽  
pp. 265-273 ◽  
Author(s):  
J Sandström ◽  
A Ekberg
Keyword(s):  
Numerical Study ◽  
Low Cycle Fatigue ◽  
Effective Strain ◽  
Axial Loading ◽  
Damage Mechanism ◽  
Cycle Fatigue ◽  
Longitudinal Loading ◽  
Calculation Results ◽  
Insulating Gap ◽  
Simulation Results

Numerical simulations are performed to study plastic deformation and fatigue impact of an insulated joint. The simulations feature a sophisticated constitutive model capable of capturing ratcheting under multi-axial loading conditions. Calculation results are presented in the form of effective strain magnitudes, plastic zone sizes, and multi-axial low cycle fatigue parameters. The simulation results indicate that the main damage mechanism at insulated joints is ratcheting and not low cycle fatigue. A parametric study quantifies effects of increased vertical and longitudinal load magnitudes, as well as the effect of an increased insulating gap. In particular, longitudinal loading is indicated as being severely deteriorating for the rail in the vicinity of the joint. Finally, the effect of rail edge bevelling is assessed and found to be small for the case studied.

Simulation Study on Shear Crack of Steel Plate

2018 ◽  
Vol 941 ◽  
pp. 480-485 ◽  
Author(s):  
Suo Quan Zhang ◽  
Si Hai Jiao ◽  
Jian Hua Ding ◽  
Qing Feng Zhang ◽  
Hong Sheng Jiang
Keyword(s):  
Mechanical Properties ◽  
Deformation Behavior ◽  
Room Temperature ◽  
Steel Plate ◽  
Shear Crack ◽  
Uniform Elongation ◽  
Shear Cracks ◽  
Factors Affecting ◽  
Simulation Results ◽  
Abaqus Software

Abaqus software is used to simulate the deformation behavior of typical steel materials during the shearing process, and to analyze the displacement change of the materials during the shearing process, and to study the main causes of the steel plate shear cracks. The results show that the mechanical properties of the steel, especially the uniform elongation of the steel plate, are important factors affecting the shear crack. At the same time, the room temperature tensile curves of several typical steels are measured. The corresponding relationship between the curve characteristics and the shear cracks is in agreement with the simulation results. Keywords: shear crack, simulation, mechanical properties, uniform elongation

scholarly journals Experimental and Numerical Analysis of the Mechanical Properties of a Pretreated Shape Memory Alloy Wire in a Self-Centering Steel Brace

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 80
Author(s):  
Bo Zhang ◽  
Sizhi Zeng ◽  
Fenghua Tang ◽  
Shujun Hu ◽  
Qiang Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Energy Dissipation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Loading Rate ◽  
Effective Elastic Modulus ◽  
Maximum Energy ◽  
Numerical Results ◽  
Energy Dissipation Capacity

As a stimulus-sensitive material, the difference in composition, fabrication process, and influencing factors will have a great effect on the mechanical properties of a superelastic Ni-Ti shape memory alloy (SMA) wire, so the seismic performance of the self-centering steel brace with SMA wires may not be accurately obtained. In this paper, the cyclic tensile tests of a kind of SMA wire with a 1 mm diameter and special element composition were tested under multi-working conditions, which were pretreated by first tensioning to the 0.06 strain amplitude for 40 cycles, so the mechanical properties of the pretreated SMA wires can be simulated in detail. The accuracy of the numerical results with the improved model of Graesser’s theory was verified by a comparison to the experimental results. The experimental results show that the number of cycles has no significant effect on the mechanical properties of SMA wires after a certain number of cyclic tensile training. With the loading rate increasing, the pinch effect of the hysteresis curves will be enlarged, while the effective elastic modulus and slope of the transformation stresses in the process of loading and unloading are also increased, and the maximum energy dissipation capacity of the SMA wires appears at a loading rate of 0.675 mm/s. Moreover, with the initial strain increasing, the slope of the transformation stresses in the process of loading is increased, while the effective elastic modulus and slope of the transformation stresses in the process of unloading are decreased, and the maximum energy dissipation capacity appears at the initial strain of 0.0075. In addition, a good agreement between the test and numerical results is obtained by comparing with the hysteresis curves and energy dissipation values, so the numerical model is useful to predict the stress–strain relations at different stages. The test and numerical results will also provide a basis for the design of corresponding self-centering steel dampers.

Numerical study of the flow over the modified simple frigate shape

2020 ◽  
pp. 095441002097775
Author(s):  
Tong Li ◽  
Yibin Wang ◽  
Ning Zhao
Keyword(s):  
Bluff Body ◽  
Recirculation Zone ◽  
Numerical Study ◽  
Reference Value ◽  
Flow Fields ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Simulation Results

The simple frigate shape (SFS) as defined by The Technical Co-operative Program (TTCP), is a simplified model of the frigate, which helps to investigate the basic flow fields of a frigate. In this paper, the flow fields of the different modified SFS models, consisting of a bluff body superstructure and the deck, were numerically studied. A parametric study was conducted by varying both the superstructure length L and width B to investigate the recirculation zone behind the hangar. The size and the position of the recirculation zones were compared between different models. The numerical simulation results show that the size and the location of the recirculation zone are significantly affected by the superstructure length and width. The results obtained by Reynolds-averaged Navier-Stokes method were also compared well with both the time averaged Improved Delayed Detached-Eddy Simulation results and the experimental data. In addition, by varying the model size and inflow velocity, various flow fields were numerically studied, which indicated that the changing of Reynolds number has tiny effect on the variation of the dimensionless size of the recirculation zone. The results in this study have certain reference value for the design of the frigate superstructure.

scholarly journals Evolution of Meniscal Biomechanical Properties with Growth: An Experimental and Numerical Study

2021 ◽  
Vol 8 (5) ◽  
pp. 70
Author(s):  
Marco Ferroni ◽  
Beatrice Belgio ◽  
Giuseppe M. Peretti ◽  
Alessia Di Giancamillo ◽  
Federica Boschetti
Keyword(s):  
Mechanical Properties ◽  
Stress Relaxation ◽  
Developmental Stage ◽  
Mechanical Response ◽  
Numerical Study ◽  
Numerical Models ◽  
Mechanical Stimulus ◽  
Specific Response ◽  
Mechanical Parameters ◽  
Biochemical Analyses

The menisci of the knee are complex fibro-cartilaginous tissues that play important roles in load bearing, shock absorption, joint lubrication, and stabilization. The objective of this study was to evaluate the interaction between the different meniscal tissue components (i.e., the solid matrix constituents and the fluid phase) and the mechanical response according to the developmental stage of the tissue. Menisci derived from partially and fully developed pigs were analyzed. We carried out biochemical analyses to quantify glycosaminoglycan (GAG) and DNA content according to the developmental stage. These values were related to tissue mechanical properties that were measured in vitro by performing compression and tension tests on meniscal specimens. Both compression and tension protocols consisted of multi-ramp stress–relaxation tests comprised of increasing strains followed by stress–relaxation to equilibrium. To better understand the mechanical response to different directions of mechanical stimulus and to relate it to the tissue structural composition and development, we performed numerical simulations that implemented different constitutive models (poro-elasticity, viscoelasticity, transversal isotropy, or combinations of the above) using the commercial software COMSOL Multiphysics. The numerical models also allowed us to determine several mechanical parameters that cannot be directly measured by experimental tests. The results of our investigation showed that the meniscus is a non-linear, anisotropic, non-homogeneous material: mechanical parameters increase with strain, depend on the direction of load, and vary among regions (anterior, central, and posterior). Preliminary numerical results showed the predominant role of the different tissue components depending on the mechanical stimulus. The outcomes of biochemical analyses related to mechanical properties confirmed the findings of the numerical models, suggesting a specific response of meniscal cells to the regional mechanical stimuli in the knee joint. During maturation, the increase in compressive moduli could be explained by cell differentiation from fibroblasts to metabolically active chondrocytes, as indicated by the found increase in GAG/DNA ratio. The changes of tensile mechanical response during development could be related to collagen II accumulation during growth. This study provides new information on the changes of tissue structural components during maturation and the relationship between tissue composition and mechanical response.

scholarly journals Development of Depth-Limited Wave Boundary Layers over a Smooth Bottom

2020 ◽  
Vol 9 (1) ◽  
pp. 27
Author(s):  
Hitoshi Tanaka ◽  
Nguyen Xuan Tinh ◽  
Xiping Yu ◽  
Guangwei Liu
Keyword(s):  
Numerical Simulation ◽  
Boundary Layer ◽  
Boundary Layers ◽  
Wave Motion ◽  
Numerical Study ◽  
Experiment Data ◽  
Tidal Motion ◽  
Long Period ◽  
Simulation Results ◽  
Wave Boundary

A theoretical and numerical study is carried out to investigate the transformation of the wave boundary layer from non-depth-limited (wave-like boundary layer) to depth-limited one (current-like boundary layer) over a smooth bottom. A long period of wave motion is not sufficient to induce depth-limited properties, although it has simply been assumed in various situations under long waves, such as tsunami and tidal currents. Four criteria are obtained theoretically for recognizing the inception of the depth-limited condition under waves. To validate the theoretical criteria, numerical simulation results using a turbulence model as well as laboratory experiment data are employed. In addition, typical field situations induced by tidal motion and tsunami are discussed to show the usefulness of the proposed criteria.

Numerical Study of Methane and Air Combustion Inside Heat-Recirculating Combustors

2013 ◽  
Author(s):  
Yanxia Li ◽  
Zhongliang Liu ◽  
Yan Wang ◽  
Jiaming Liu
Keyword(s):  
Gas Flow ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Central Area ◽  
Small Scale ◽  
Inlet Velocity ◽  
Strong Convection ◽  
Simulation Results ◽  
Lean Fuel ◽  
Set Up

A numerical model on methane/air combustion inside a small Swiss-roll combustor was set up to investigate the flame position of small-scale combustion. The simulation results show that the combustion flame could be maintained in the central area of the combustor only when the speed and equivalence ratio are all within a narrow and specific range. For high inlet velocity, the combustion could be sustained stably even with a very lean fuel and the flame always stayed at the first corner of reactant channel because of the strong convection heat transfer and preheating. For low inlet velocity, small amounts of fuel could combust stably in the central area of the combustor, because heat was appropriately transferred from the gas to the inlet mixture. Whereas, for the low premixed gas flow, only in certain conditions (Φ = 0.8 ～ 1.2 when ν0 = 1.0m/s, Φ = 1.0 when ν0 = 0.5m/s) the small-scale combustion could be maintained.

Effect of Interfacial Properties on the Mechanical Behavior of Bone-Like Materials: A Numerical Study

2017 ◽  
Vol 09 (01) ◽  
pp. 1750014 ◽  
Author(s):  
Xingguo Li ◽  
Bingbing An ◽  
Dongsheng Zhang
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Numerical Study ◽  
Element Model ◽  
Interfacial Behavior ◽  
Yield Behavior ◽  
Bonding Property ◽  
The Matrix ◽  
Bonding Properties ◽  
Superior Mechanical Properties

Interfacial behavior in the microstructure and the plastic deformation in the protein matrix influence the overall mechanical properties of biological hard tissues. A cohesive finite element model has been developed to investigate the inelastic mechanical properties of bone-like biocomposites consisting of hard mineral crystals embedded in soft biopolymer matrix. In this study, the complex interaction between plastic dissipation in the matrix and bonding properties of the interface between minerals and matrix is revealed, and the effect of such interaction on the toughening of bone-like biocomposites is identified. For the case of strong and intermediate interfaces, the toughness of biocomposites is controlled by the post yield behavior of biopolymer; the matrix with low strain hardening can undergo significant plastic deformation, thereby promoting enhanced fracture toughness of biocomposites. For the case of weak interfaces, the toughness of biocomposites is governed by the bonding property of the interface, and the post-yield behavior of biopolymer shows negligible effect on the toughness. The findings of this study help to direct the path for designing bioinspired materials with superior mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document