Synergistic effect of carbon nanotubes and nano-hydroxyapatite on mechanical properties of polyetheretherketone based hybrid nanocomposites

2020 ◽  
pp. 096739112096950
Author(s):  
Manjeet Kumar ◽  
Rajesh Kumar ◽  
Sandeep Kumar
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Elastic Modulus ◽  
Storage Modulus ◽  
Fracture Resistance ◽  
Compression Molding ◽  
Mechanical Analysis ◽  
Hybrid Nanocomposites ◽  
Hybrid Nanocomposite ◽  
And Storage

Hybrid nanocomposites utilize the benefits of properties of different fillers to enhance its desired properties. Polyetheretherketone (PEEK) based hybrid nanocomposites have immense potential applications in aerospace, automobile, high-temperature electrical applications, and medical and health care. The present work is an attempt to improve the elastic modulus, hardness, fracture resistance, and storage modulus simultaneously by reinforcing the PEEK matrix with multiwall carbon nanotubes (MWCNTs) filler and 30 wt.% nano hydroxyapatite (nHA)-MWCNT hybrid filler. The nanocomposites having 0,1,3,5 and 7 wt.% of MWCNTs were fabricated by the Ball Mixing and Compression Molding Method. Customized Die Heater setup was used to ensure uniform heating and cooling during compression molding. The morphology was examined by Field Emission Scanning Electron Microscopy (FESEM) and Energy-Dispersive X-ray Spectroscopy (EDS) and uniform distribution of nano-fillers was observed. The nanoindentation method was adopted to investigate the Static Mechanical Analysis (SMA) and Dynamic Mechanical Analysis (DMA) at varying frequencies of loading, of nanocomposites. At 5 wt.% of MWCNTs, the enhancements in elastic modulus, hardness, fracture resistance, and storage modulus were observed to be 80%, 36%, 32%, and 58% respectively in case of PEEK/(0–7%)MWCNT nanocomposite and 104%, 76%, 16%, and 80% respectively in case of PEEK/30%nHA-(0–7%)MWCNT hybrid nanocomposite. The decrements in loss factor indicated the improvement in elastic behavior of nanocomposites with increasing wt.% of MWCNTs. The elastic modulus of PEEK/30%nHA-5%MWCNT hybrid nanocomposite was observed to be 7.67 GPa, which falls within the range of elastic modulus of the human cortical bone. The results revealed that 5 wt.% of MWCNTs is optimum filler composition for improving the mechanical properties.

Hybrid Nanocomposites – A Review

2015 ◽  
Vol 766-767 ◽  
pp. 50-56 ◽  
Author(s):  
T. Thomas Koilraj ◽  
K. Kalaichelvan
Keyword(s):  
Mechanical Properties ◽  
Real Life ◽  
Mechanical Analysis ◽  
Atomic Scale ◽  
Hybrid Nanocomposites ◽  
Hybrid Nanocomposite ◽  
Surrounding Matrix ◽  
Interfacial Bonding Strength ◽  
Thermal And Electrical Properties ◽  
Properties Of Materials

Since the last ten years, research happenings in the field of nanomaterials have been increased dramatically. Materials scientists and researchers have realized that the mechanical properties of materials can be altered at the fundamental level, i.e. at the atomic-scale. Carbon nanotubes have been well recognized as nanostructural materials that can be used to modify mechanical, thermal and electrical properties of polymer-based composite materials, because of their excellent properties and perfect atom arrangement. In geneal, scientific research related to the nanotubes and their co-related polymer based composites can be distinguished into four particular scopes: (i) production of high purity and well-regulated nanotubes, in terms of their size, length and chiral arrangement; (ii) enhancement of interfacial bonding strength between the nanotubes and their surrounding matrix; (iii) control of the dispersion properties and alignment of the nanotubes in nanotube/polymer composites and (iv) applications of the nanotube in real life. Research shows that addition of resin with nanoclays permits to retain stiffness without losing toughness, and also improving barrier and thermal properties. Dynamic Mechanical Analysis (DMA) studies revealed that filling the carbon nanotube into epoxy can produce a 90% enhancement in storage modulus and a 22°C increase in Tg. Addition of nanoclay and epoxy with nanotubes forms a hybrid nanocomposite.

Two modified multiscale modeling approaches for determination of two-phase and hybrid nanocomposite properties

2021 ◽  
pp. 095440622110303
Author(s):  
Ali Khodadadi ◽  
Hossein Golestanian ◽  
Farshid Aghadavoudi
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Multiscale Modeling ◽  
Md Simulations ◽  
Hybrid Nanocomposites ◽  
Hybrid Nanocomposite ◽  
Fiber Volume ◽  
Two Phase ◽  
Epoxy Nanocomposite ◽  
Modeling Approaches

In this paper, mechanical properties of thermoset epoxy based two-phase and hybrid nanocomposites containing carbon nanotubes (CNTs), and carbon nano diamond particles (CNPs) are determined using two different multiscale modeling approaches. The effects of resin crosslinking, interphase mechanical properties, and filler agglomeration on nanocomposite mechanical properties are investigated. First, the crosslinking between Diglycidyl ether of bisphenol A (DGEBA) resin and Diethylenetriamine (DETA) hardener is modeled considering different crosslinking forms and ratios using molecular dynamics (MD) simulations. Results indicate that resin elastic modulus increases with increasing the crosslinking ratio especially above 75%, but crosslinking form has an insignificant effect on resin modulus. Next, different nanofillers and their interphases are modeled using MD simulations to determine the representative volume element (RVE) and the effective fiber sizes and mechanical properties. The thickness of the interphase for each nano filler type is determined from the radial distribution function (RDF) diagram in order to determine the effective fiber volume more realistically. Then, the general Halpin-Tsai model is modified by adding an interphase volume factor and is used to determine two-phase and hybrid nanocomposite mechanical properties using effective nano filler properties. In addition, a new numerical multiscale modeling technique was developed which uses the MD-determined effective filler properties along with finite element method (FEM) to determine nanocomposite mechanical properties. Nanocomposites reinforced with aligned and randomly oriented reinforcements are modeled. Good agreement is observed between the two multiscale modeling techniques for the two-phase nanocomposite mechanical properties. Finally, the effect of filler agglomeration on nanocomposite properties is investigated. The results indicate that agglomeration decreases elastic modulus of CNT/epoxy nanocomposite. However, agglomeration does not have a significant effect on elastic modulus of CNP/epoxy nanocomposite.

scholarly journals Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3140
Author(s):  
Kamil Dydek ◽  
Anna Boczkowska ◽  
Rafał Kozera ◽  
Paweł Durałek ◽  
Łukasz Sarniak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Copper Foil ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Lightning Strike ◽  
Single Wall Carbon Nanotubes ◽  
Carbon Fibre Reinforced Polymer ◽  
The Impact

The main aim of this work was the investigation of the possibility of replacing the heavy metallic meshes applied onto the composite structure in airplanes for lightning strike protection with a thin film of Tuball single-wall carbon nanotubes in the form of ultra-light, conductive paper. The Tuball paper studied contained 75 wt% or 90 wt% of carbon nanotubes and was applied on the top of carbon fibre reinforced polymer before fabrication of flat panels. First, the electrical conductivity, impact resistance and thermo-mechanical properties of modified laminates were measured and compared with the reference values. Then, flat panels with selected Tuball paper, expanded copper foil and reference panels were fabricated for lightning strike tests. The effectiveness of lightning strike protection was evaluated by using the ultrasonic phased-array technique. It was found that the introduction of Tuball paper on the laminates surface improved both the surface and the volume electrical conductivity by 8800% and 300%, respectively. The impact resistance was tested in two directions, perpendicular and parallel to the carbon fibres, and the values increased by 9.8% and 44%, respectively. The dynamic thermo-mechanical analysis showed higher stiffness and a slight increase in glass transition temperature of the modified laminates. Ultrasonic investigation after lightning strike tests showed that the effectiveness of Tuball paper is comparable to expanded copper foil.

scholarly journals Enhancement of out-of-plane mechanical properties of carbon fiber reinforced epoxy resin composite by incorporating the multi-walled carbon nanotubes

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Seyed Ali Mirsalehi ◽  
Amir Ali Youzbashi ◽  
Amjad Sazgar
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Test ◽  
Epoxy Resin ◽  
Laminate Composite ◽  
Filament Winding ◽  
Hybrid Nanocomposites ◽  
Out Of Plane ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

AbstractIn this study, epoxy hybrid nanocomposites reinforced by carbon fibers (CFs) were fabricated by a filament winding. To improve out-of-plane (transverse) mechanical properties, 0.5 and 1.0 Wt.% multi-walled carbon nanotubes (MWCNTs) were embedded into epoxy/CF composites. The MWCNTs were well dispersed into the epoxy resin without using any additives. The transverse mechanical properties of epoxy/MWCNT/CF hybrid nanocomposites were evaluated by the tensile test in the vertical direction to the CFs (90º tensile) and flexural tests. The fracture surfaces of composites were studied by scanning electron microscopy (SEM). The SEM observations showed that the bridging of the MWCNTs is one of the mechanisms of transverse mechanical properties enhancement in the epoxy/MWCNT/CF composites. The results of the 90º tensile test proved that the tensile strength and elongation at break of nanocomposite with 1.0 Wt.% MWCNTs improved up to 53% and 50% in comparison with epoxy/CF laminate composite, respectively. Furthermore, the flexural strength, secant modulus, and elongation of epoxy/1.0 Wt.% MWCNT/CF hybrid nanocomposite increased 15%, 7%, and 9% compared to epoxy/CF laminate composite, respectively.

scholarly journals Polymeric Composites Based on Polyurea Matrix Reinforced with Carbon Nanotubes

2017 ◽  
Vol 54 (1) ◽  
pp. 41-44 ◽  
Author(s):  
Maria Adina Vulcan ◽  
Celina Damian ◽  
Paul Octavian Stanescu ◽  
Eugeniu Vasile ◽  
Razvan Petre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This paper deals with the synthesis of polyurea and its use as polymer matrix for nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Two types of materials were obtained during this research, the first cathegory uses the polyurea as matrix and the second one uses a mixture between epoxy resin and polyurea. The nanocomposites were characterized by Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Scanning Electron Microscopy (SEM) and Tensile Tests .The elastomeric features of nanocomposites were highlighted by the results which showed low value of Tg. Also higher thermal stability with ~40oC compared with commercial products (M20) were observed, but lower mechanical properties compared to neat polyurea.

scholarly journals Surface Hybrid Nanocomposite Produced by Friction Stir Processing: Microstructural Evolution, Mechanical Properties and Tribological Behavior

2021 ◽  
Author(s):  
Saeed Ahmadifard ◽  
Nasir Shahin ◽  
Mojtaba Vakili-azghandi ◽  
Shahab Kazemi
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Friction Stir Processing ◽  
Travel Speed ◽  
Hybrid Nanocomposites ◽  
Max Phase ◽  
Hybrid Nanocomposite ◽  
Friction Stir ◽  
Scanning Electron

Abstract This study investigates the effects of incorporating Ti3AlC2 MAX phase into Al7075-T6 alloy by friction stir processing as well as adding Al2O3 nanoparticles to obtain a surface hybrid nanocomposite. These composites were successfully prepared by friction stir processing with a rotational speed of 1000 rpm and a travel speed of 28 mm/min after 3 passes. Optical, atomic force and scanning electron microscopy as well as microhardness, tensile and wear tests utilized to characterize the fabricated surface hybrid nanocomposites. Results showed that the maximum tensile strength and hardness value were achieved for Al-100% Al2O3 composite due to more grain refinement and effective dispersion of nanoparticles. Due to its laminar structure, Ti3AlC2 MAX phase enhanced better tribological characterization whereas Al2O3 nanoparticles cause better mechanical properties. Scanning electron microscopy tests revealed that the wear mechanism changes from adhesive for Al7075 alloy to adhesive-abrasive for the nanocomposite specimens.

The influence of functionalization time of carbon nanotube on the mechanical properties of the epoxy composites

2017 ◽  
Vol 51 (12) ◽  
pp. 1693-1701 ◽  
Author(s):  
EA Zakharychev ◽  
EN Razov ◽  
Yu D Semchikov ◽  
NS Zakharycheva ◽  
MA Kabina
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Carbon Nanotube ◽  
Composite Materials ◽  
Polymer Composites ◽  
Epoxy Composites ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

This paper investigates the structure, length, and percentage of functional groups of multi-walled carbon nanotubes (CNT) depending on the time taken for functionalization in HNO3 and H2SO4 mixture. The carbon nanotube content and influence of functionalization time on mechanical properties of polymer composite materials based on epoxy matrix are studied. The extreme dependencies of mechanical properties of carbon nanotube functionalization time of polymer composites were established. The rise in tensile strength of obtained composites reaches 102% and elastic modulus reaches 227% as compared to that of unfilled polymer. The composites exhibited best mechanical properties by including carbon nanotube with 0.5 h functionalization time.

scholarly journals Melanocyte pigmentation stiffens murine cardiac tricuspid valve leaflet

2009 ◽  
Vol 6 (40) ◽  
pp. 1097-1102 ◽  
Author(s):  
Kantesh Balani ◽  
Flavia C. Brito ◽  
Lidia Kos ◽  
Arvind Agarwal
Keyword(s):  
Mechanical Properties ◽  
Storage Modulus ◽  
Tricuspid Valve ◽  
Viscoelastic Properties ◽  
Mechanical Analysis ◽  
Current Work ◽  
Valve Leaflet ◽  
Stiffness Measurement ◽  
Proper Functioning

Pigmentation of murine cardiac tricuspid valve leaflet is associated with melanocyte concentration, which affects its stiffness. Owing to its biological and viscoelastic nature, estimation of the in situ stiffness measurement becomes a challenging task. Therefore, quasi-static and nanodynamic mechanical analysis of the leaflets of the mouse tricuspid valve is performed in the current work. The mechanical properties along the leaflet vary with the degree of pigmentation. Pigmented regions of the valve leaflet that contain melanocytes displayed higher storage modulus (7–10 GPa) than non-pigmented areas (2.5–4 GPa). These results suggest that the presence of melanocytes affects the viscoelastic properties of the mouse atrioventricular valves and are important for their proper functioning in the organism.

On the mechanical properties of functionally graded materials reinforced by carbon nanotubes

2017 ◽  
Vol 232 (9) ◽  
pp. 1632-1646 ◽  
Author(s):  
Saeed Rouhi ◽  
Seyed H Alavi
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Elastic Modulus ◽  
Functionally Graded Materials ◽  
Volume Fraction ◽  
Single Walled Carbon Nanotubes ◽  
Functionally Graded ◽  
Graded Materials ◽  
Single Walled Carbon ◽  
Walled Carbon Nanotubes

In this paper, the elastic properties of functionally graded materials reinforced by single-walled carbon nanotubes are studied. Three different matrices, including steel-silicon, iron-alumina and alumina-zirconia are considered. Besides, the effects of nanotube length, radius and volume fraction on the Young’s modulus of functionally graded matrices reinforced by single-walled carbon nanotubes are investigated. It is observed that short nanotubes not only cannot increase the longitudinal elastic modulus of the matrices, but sometimes decrease their elastic modulus. Of the three selected matrices, steel-silicon matrix would have the most enhancement. Investigation of the effect of nanotube volume fraction on the mechanical properties of nanocomposites shows that increasing the volume fraction of long single-walled carbon nanotube results in increasing the elastic modulus of the nanocomposites.

Characterization of Vinyl Ester/Jute Fiber Bio-Composites in the Presence of Multi-Walled Carbon Nanotubes

2017 ◽  
Vol 730 ◽  
pp. 221-225
Author(s):  
Mohamed Bassyouni ◽  
Shereen M.S. Abdel-Hamid ◽  
Mohamed H. Abdel-Aziz ◽  
M.Sh. Zoromba
Keyword(s):  
Carbon Nanotubes ◽  
Storage Modulus ◽  
Vinyl Ester ◽  
Loss Modulus ◽  
Weight Ratio ◽  
Mechanical Analysis ◽  
Jute Fiber ◽  
Multi Walled Carbon Nanotubes ◽  
Fiber Reinforcements ◽  
Walled Carbon Nanotubes

In this study, vinyl ester –Jute fiber biocomposites were prepared using vacuum-assisted resin infusion (VARI) process. Woven Jute fibers were used with mass fraction 0.68. Multi-walled carbon nanotubes (MWCNTs) are added to the resin with weight ratio 0.5: 99.5 to investigate the thermo-mechanical properties of bio-composites. Storage and loss modulus of vinyl ester bio-composites were investigated in the presence MWCNTs over a range of temperature (25 to 160 oC) to measure the capacity of bio-composite to store and dissipate energy. Damping properties of vinyl ester bio-composites were studied in terms of tan (d). Viscoelastic test using dynamic mechanical analysis (DMA) showed that the glass transition temperature increases with the addition of MWCNTs up to 112.4 oC. Addition of jute fiber reinforcements improves the storage modulus value of vinyl ester more than 65% at room temperature. Significant improvement in storage modulus was found in the presence of MWCNTs.

Sign in / Sign up

Export Citation Format

Share Document