Three-Dimensional Starch Model for Simulation of Corrective Osteotomy for a Complex Bone Deformity: A Case Report

2003 ◽  
Vol 24 (4) ◽  
pp. 364-367 ◽  
Author(s):  
Tominaga Shimizu ◽  
Fumio Fujioka ◽  
Hiroki Gomyo ◽  
Kenichi Isobe ◽  
Kunio Takaoka

The complex valgus deformity of the right ankle of a 24-year-old Maffucci syndrome man was corrected by three-dimensional osteotomy followed by limb lengthening. Before surgical correction of the deformity, we used computed tomography data to make a life-size three-dimensional plastic model of the deformed ankle for an accurate understanding of the anatomical deformity. We then used this model to perform a simulated osteotomy. The real osteotomy was performed immediately afterwards and valgus and recurvatum deformities were corrected accurately. We recommend simulated surgery using a three-dimensional plastic model which will improve the pre-operative planning technique and the accuracy of the end results.

2019 ◽  
Vol 4 (4) ◽  
pp. 2473011419S0006
Author(s):  
Matthias Peiffer ◽  
C. Belvedere ◽  
S. Clockaerts ◽  
T. Leenders ◽  
Alexej Barg ◽  
...  

Category: Hindfoot Introduction/Purpose: An adult-acquired flatfoot deformity is a three-dimensional (3D) condition characterized by a loss of the medial longitudinal arch, valgus alignment of the hindfoot, and abduction of the midfoot. When conservative measures are not sufficient, a medializing calcaneal osteotomy (MCO) is frequently performed to correct the deformity, but there is lack of data on the associated three-dimensional variables defining the final correction. A possible reason for this shortcoming could be the current image-based analyses, mainly performed on bi-dimensional radiographs. These are hampered by errors in 3D rotations and superimposition of bony structures. The aim of this study was therefore to assess the correlation between the preoperative hindfoot valgus deformity and calcaneal osteotomy angle and the postoperative calcaneal displacement by use of weightbearing CT (WBCT). Methods: Weight-bearing CT scans obtained pre- and post-operatively were analyzed for sixteen patients with a mean age of 49.4 years (range: 18-66 years). Indication for surgery was adult-acquired flat foot deformity stage II. Based on the WBCT images, pre- and post-operative 3D bone morphological models of the tibia, talus, calcaneus, and the second metatarsal were created, on which anatomical bony landmarks were computationally identified to define a Foot Anatomical reference Frame (FAF). This FAF was used to measure valgus deformity pre- and post-operatively, inclination of the osteotomy plane, and displacement of the calcaneus (Fig. 1). Linear regression was conducted to assess the relationship between these measurements. Results: On average, the hindfoot valgus changed from 13.1° (±4.6) preoperatively to 5.7° (±4.3) postoperatively. A mean inferior displacement of 3.2 mm (±1.3) was observed along the osteotomy with a mean inclination angle of 54.6° (±5.6), 80.5° (±10.7), - 13.7° (±15.7) in the axial, sagittal and coronal planes, respectively. A statistically significant positive relationship (P < .05, R2 = 0.6) was found between the preoperative valgus, the axial osteotomy inclination, and the inferior displacement. Conclusion: This study shows that the degree of preoperative valgus of the hindfoot and the axial osteotomy angle are predictive factors for the amount of postoperative plantar displacement of the calcaneus. These findings contrast the general recommendation of performing a 90° calcaneal osteotomy angle, i.e. perpendicular to the lateral calcaneal wall in every patient. The obtained factors should be taken into account when performing a MCO and could be integrated in a computer-based pre- operative planning.


2011 ◽  
Vol 1 (3) ◽  
pp. 297-307 ◽  
Author(s):  
Giancarlo Pennati ◽  
Chiara Corsini ◽  
Daria Cosentino ◽  
Tain-Yen Hsia ◽  
Vincenzo S. Luisi ◽  
...  

Cavopulmonary connections are surgical procedures used to treat a variety of complex congenital cardiac defects. Virtual pre-operative planning based on in silico patient-specific modelling might become a powerful tool in the surgical decision-making process. For this purpose, three-dimensional models can be easily developed from medical imaging data to investigate individual haemodynamics. However, the definition of patient-specific boundary conditions is still a crucial issue. The present study describes an approach to evaluate the vascular impedance of the right and left lungs on the basis of pre-operative clinical data and numerical simulations. Computational fluid dynamics techniques are applied to a patient with a bidirectional cavopulmonary anastomosis, who later underwent a total cavopulmonary connection (TCPC). Multi-scale models describing the surgical region and the lungs are adopted, while the flow rates measured in the venae cavae are used at the model inlets. Pre-operative and post-operative conditions are investigated; namely, TCPC haemodynamics, which are predicted using patient-specific pre-operative boundary conditions, indicates that the pre-operative balanced lung resistances are not compatible with the TCPC measured flows, suggesting that the pulmonary vascular impedances changed individually after the surgery. These modifications might be the consequence of adaptation to the altered pulmonary blood flows.


Symmetry ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 2132
Author(s):  
Arwa Fathy ◽  
Bernardo T. Lopes ◽  
Renato Ambrósio ◽  
Richard Wu ◽  
Ahmed Abass

Purpose: To investigate the effectiveness of flipping left corneas topography and analysethem quantitively along with fellow right corneas based on the assumption that they are mirror images of each other. Methods: The study involved scanning both eyes of 177 healthy participants (aged 35.3 ± 15.8) and 75 keratoconic participants (aged 33.9 ± 17.8). Clinical tomography data were collected for both eyes using the Pentacam HR and processed by a fully automated custom-built MATLAB code. For every case, the right eye was used as a datum fixed surface while the left cornea was flipped around in the superior–inferior direction. In this position, the root-mean-squared difference (RMS) between the flipped left cornea and the right cornea was initially determined for both the anterior and posterior corneal surfaces. Next, the iterative closest point transformation algorithm was applied on the three-dimensional flipped cornea to allow the flipped left corneal anterior surface to translate and rotate, minimising the difference between it and the right corneal anterior surface. Then, the RMS differences were recalculated and compared. Results: A comparison of the dioptric powers showed a significant difference between the RMS of both the flipped left eyes and the right eyes in the healthy and the KC groups (p < 0.001). The RMS of the surfaces of the flipped left corneas and the right corneas was 0.6 ± 0.4 D among the healthy group and 4.1 ± 2.3 among the KC group. After transforming the flipped left corneas, the RMS was recorded as 0.5 ± 0.3 D and 2.4 ± 2 D among the healthy and KC groups, respectively. Conclusions: Although fellow eyes are highly related in their clinical parameters, they should be treated with care when one eye topography is flipped and processed with the other eye topography in an optic-related research analysis where translation might be needed. In KC, an asymmetric disease, it was observed that a portion of the asymmetry was due to a corneal apex shift interfering with the image acquisition. Therefore, transforming the flipped left eyes by rotation and translation results in a fairer comparison between the fellow KC corneas.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Peyman Bakhshayesh ◽  
Ahmed Zaghloul ◽  
Benjamin Michael Sephton ◽  
Anders Enocson

Abstract Anatomical reconstruction of pelvic fractures has been shown to affect functional outcome. Using the contra lateral side of the extremities to create a template for an ipsilateral reconstruction is common practice in orthopedic surgery. We aimed to assess whether hemi pelvises are symmetrical in terms of translation and rotation using 3D reconstruction, point to point mirroring and merging of the 3D created volumes, a method with previous proven high precision and accuracy. CT images of ten randomly selected patients were used. The DICOM images were converted to STL files. Three dimensional images of left hemi pelvis were reversed and merged with the right side. The posterior aspect of the pelvises was considered static and the anterior aspect as moving. Differences in translation and rotation were measured. There were no statistically significant differences between right and left hemi pelvis. The 95% confidence interval (CI) for all mean angular differences between right hemi pelvis and mirrored left hemi pelvis were − 2° to 1.5°. The 95% CI for all mean translational differences between these two objects were − 2.3 to 2.9 mm. Differences between the right hemi pelvis and the mirrored images of the left hemi pelvis for any patient greater than 3 mm or 2 degrees could be excluded with a 95% confidence. The left and right hemi pelvis of healthy adults are symmetrical enough. The pre-operative planning based on a healthy contra lateral side seems reasonable.


Animals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1445
Author(s):  
Hee-Ryung Lee ◽  
Gareeballah Osman Adam ◽  
Dong Kwon Yang ◽  
Tsendsuren Tungalag ◽  
Sei-Jin Lee ◽  
...  

3-D surgical planning for restorative osteotomy is costly and time-consuming because surgeons need to be helped from commercial companies to get 3-D printed bones. However, practitioners can save time and keep the cost to a minimum by utilizing free software and establishing their 3-D printers locally. Surgical planning for the corrective osteotomy of antebrachial growth deformities (AGD) is challenging for several reasons (the nature of the biapical or multiapical conformational abnormalities and lack of a reference value for the specific breed). Pre-operative planning challenges include: a definite description of the position of the center of rotation of angulation (CORA) and proper positioning of the osteotomies applicable to the CORA. In the present study, we demonstrated an accurate and reproducible bone-cutting technique using patient-specific instrumentations (PSI) 3-D technology. The results of the location precision showed that, by using PSIs, the surgeons were able to accurately replicate preoperative resection planning. PSI results also indicate that PSI technology provides a smaller standard deviation than the freehand method. PSI technology performed in the distal radial angular deformity may provide good cutting accuracy. In conclusion, the PSI technology may improve bone-cutting accuracy during corrective osteotomy by providing clinically acceptable margins.


Author(s):  
Ruslan Khairutdinov ◽  
Timur Minasov ◽  
Ekaterina Yakupova ◽  
Elvina Mukhametzyanova

Hallux valgus is characterized by the appearance and growth of a painful “lump” in the region of the first metatarsophalangeal joint, the development of forefoot corns, and inability to choose the right shoes, which leads to a significant decrease in the quality of life of these patients. Corrective osteotomies that preserve the metatarsophalangeal joint, for example Austin (Chevron) osteotomy, are usually used for hallux valgus deformity of the I, II degrees. Radiography with the study of the hallux valgus angle (HVA), the intermetatarsal angle (IMA), the distal metatarsal articular angle (DMAA) is a research method that shows the true correlation between bone structures. The correlation between the radiological and functional indicators of osteotomy allows us to determine possible recommendations for indications for surgical treatment of Hallux valgus. Correlation shows that the largest correction of hallux valgus in older patients occurs due to a small adjustment of the angle of DMMA and HVA. IMA had the best correction after Austin osteotomy among patients of a younger age, then the HVA, and the DMMA had minimum correction according to the AOFAS rating scale (Kitaoka). The revealed correlations allow us to determine the correct tactics for the treatment of hallux valgus by identifying the benefits of Austin osteotomy.


Author(s):  
Valeria Vendries ◽  
Tamas Ungi ◽  
Jordan Harry ◽  
Manuela Kunz ◽  
Jana Podlipská ◽  
...  

Abstract Purpose Osteophytes are common radiographic markers of osteoarthritis. However, they are not accurately depicted using conventional imaging, thus hampering surgical interventions that rely on pre-operative images. Studies have shown that ultrasound (US) is promising at detecting osteophytes and monitoring the progression of osteoarthritis. Furthermore, three-dimensional (3D) ultrasound reconstructions may offer a means to quantify osteophytes. The purpose of this study was to compare the accuracy of osteophyte depiction in the knee joint between 3D US and conventional computed tomography (CT). Methods Eleven human cadaveric knees were pre-screened for the presence of osteophytes. Three osteoarthritic knees were selected, and then, 3D US and CT images were obtained, segmented, and digitally reconstructed in 3D. After dissection, high-resolution structured light scanner (SLS) images of the joint surfaces were obtained. Surface matching and root mean square (RMS) error analyses of surface distances were performed to assess the accuracy of each modality in capturing osteophytes. The RMS errors were compared between 3D US, CT and SLS models. Results Average RMS error comparisons for 3D US versus SLS and CT versus SLS models were 0.87 mm ± 0.33 mm (average ± standard deviation) and 0.95 mm ± 0.32 mm, respectively. No statistical difference was found between 3D US and CT. Comparative observations of imaging modalities suggested that 3D US better depicted osteophytes with cartilage and fibrocartilage tissue characteristics compared to CT. Conclusion Using 3D US can improve the depiction of osteophytes with a cartilaginous portion compared to CT. It can also provide useful information about the presence and extent of osteophytes. Whilst algorithm improvements for automatic segmentation and registration of US are needed to provide a more robust investigation of osteophyte depiction accuracy, this investigation puts forward the potential application for 3D US in routine diagnostic evaluations and pre-operative planning of osteoarthritis.


2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Naoki Enomoto ◽  
Kazuhiko Yamada ◽  
Daiki Kato ◽  
Shusuke Yagi ◽  
Hitomi Wake ◽  
...  

Abstract Background Bochdalek hernia is a common congenital diaphragmatic defect that usually manifests with cardiopulmonary insufficiency in neonates. It is very rare in adults, and symptomatic cases are mostly left-sided. Diaphragmatic defects generally warrant immediate surgical intervention to reduce the risk of incarceration or strangulation of the displaced viscera. Case presentation A 47-year-old woman presented with dyspnea on exertion. Computed tomography revealed that a large part of the intestinal loop with superior mesenteric vessels and the right kidney were displaced into the right thoracic cavity. Preoperative three-dimensional (3D) simulation software visualized detailed anatomy of displaced viscera and the precise location and size of the diaphragmatic defect. She underwent elective surgery after concomitant pulmonary hypertension was stabilized preoperatively. The laparotomic approach was adopted. Malformation of the liver and the presence of intestinal malrotation were confirmed during the operation. The distal part of the duodenum, jejunum, ileum, colon, and right kidney were reduced into the abdominal cavity consecutively. A large-sized oval defect was closed with monofilament polypropylene mesh. No complications occurred postoperatively. Conclusion Symptomatic right-sided Bochdalek hernia in adults is exceedingly rare and is frequently accompanied by various visceral anomalies. Accurate diagnosis and appropriate surgical repair are crucial to prevent possible incarceration or strangulation. The preoperative 3D simulation provided comprehensive information on anatomy and concomitant anomalies and helped surgeons plan the operation meticulously and perform procedures safely.


2020 ◽  
Vol 10 (1) ◽  
pp. 14
Author(s):  
Cezary Grochowski ◽  
Kamil Jonak ◽  
Marcin Maciejewski ◽  
Andrzej Stępniewski ◽  
Mansur Rahnama-Hezavah

Purpose: The aim of this study was to assess the volumetry of the hippocampus in the Leber’s hereditary optic neuropathy (LHON) of blind patients. Methods: A total of 25 patients with LHON were randomly included into the study from the national health database. A total of 15 patients were selected according to the inclusion criteria. The submillimeter segmentation of the hippocampus was based on three-dimensional spoiled gradient recalled acquisition in steady state (3D-SPGR) BRAVO 7T magnetic resonance imaging (MRI) protocol. Results: Statistical analysis revealed that compared to healthy controls (HC), LHON subjects had multiple significant differences only in the right hippocampus, including a significantly higher volume of hippocampal tail (p = 0.009), subiculum body (p = 0.018), CA1 body (p = 0.002), hippocampal fissure (p = 0.046), molecular layer hippocampus (HP) body (p = 0.014), CA3 body (p = 0.006), Granule Cell (GC) and Molecular Layer (ML) of the Dentate Gyrus (DG)–GC ML DG body (p = 0.003), CA4 body (p = 0.001), whole hippocampal body (p = 0.018), and the whole hippocampus volume (p = 0.023). Discussion: The ultra-high-field magnetic resonance imaging allowed hippocampus quality visualization and analysis, serving as a powerful in vivo diagnostic tool in the diagnostic process and LHON disease course assessment. The study confirmed previous reports regarding volumetry of hippocampus in blind individuals.


2020 ◽  
Vol 46 (08) ◽  
pp. 895-907
Author(s):  
Nina D. Anfinogenova ◽  
Oksana Y. Vasiltseva ◽  
Alexander V. Vrublevsky ◽  
Irina N. Vorozhtsova ◽  
Sergey V. Popov ◽  
...  

AbstractPrompt diagnosis of pulmonary embolism (PE) remains challenging, which often results in a delayed or inappropriate treatment of this life-threatening condition. Mobile thrombus in the right cardiac chambers is a neglected cause of PE. It poses an immediate risk to life and is associated with an unfavorable outcome and high mortality. Thrombus residing in the right atrial appendage (RAA) is an underestimated cause of PE, especially in patients with atrial fibrillation. This article reviews achievements and challenges of detection and management of the right atrial thrombus with emphasis on RAA thrombus. The capabilities of transthoracic and transesophageal echocardiography and advantages of three-dimensional and two-dimensional echocardiography are reviewed. Strengths of cardiac magnetic resonance imaging (CMR), computed tomography, and cardiac ventriculography are summarized. We suggest that a targeted search for RAA thrombus is necessary in high-risk patients with PE and atrial fibrillation using transesophageal echocardiography and/or CMR when available independently on the duration of the disease. High-risk patients may also benefit from transthoracic echocardiography with right parasternal approach. The examination of high-risk patients should involve compression ultrasonography of lower extremity veins along with the above-mentioned technologies. Algorithms for RAA thrombus risk assessment and protocols aimed at identification of patients with RAA thrombosis, who will potentially benefit from treatment, are warranted. The development of treatment protocols specific for the diverse populations of patients with right cardiac thrombosis is important.


Sign in / Sign up

Export Citation Format

Share Document