Baxter elastomeric pumps: Weighing as an alternative to visual inspection

Purpose Elastomeric pumps are used to administer 46-hour infusions of 5-fluorouracil (5FU). Baxter suggests patients visually monitor their pumps to ensure that infusions are proceeding correctly. This can be confusing and lead to concerns about under- or over-dosing. Baxter has not considered weighing pumps as a validated method for monitoring. This study aims to validate weighing as a more accurate method for patients and healthcare professionals, and describe real life Baxter Infusor™ variability. Methods Patients who had been started on a 46-hour 5FU infusion returned to the clinic approximately 24 h after starting treatment. The pump was weighed on a StarFrit kitchen scale, and date, time, and weights recorded. Patients were asked if they had a preference for weighing or visually inspecting their pump. Results Pumps ( n = 103) were weighed between 17.25 and 27.5 h after connection. The average weight of a pump was 189 g. Of 103 pumps weighed, 99 weighed less than expected, corresponding to average flow rates of 5.69 mL/h over the elapsed time. The expected flow rate is 5 mL/h with 10% variability. Average flow rates within the 17.25- to 27.5-hour window were 4.561 mL/h, which is 8.78% slower than expected, but within the 10% known variability. Forty-seven percent of patients didn’t have a preference for either method, but for those who did have a preference, more than twice as many preferred weighing. Conclusion With proper education, weighing Baxter Infusors at home with kitchen scales can be an accepted and objective alternative to the current recommendation of visual inspection.

Download Full-text

Anomalous Decrease in Flow Rates of Micro-Orifice Flows of Water With Increasing the Elapsed Time After Inception of the Flow

ASME-JSME-KSME 2011 Joint Fluids Engineering Conference: Volume 1, Symposia – Parts A, B, C, and D ◽

10.1115/ajk2011-14002 ◽

2011 ◽

Cited By ~ 2

Author(s):

Tomiichi Hasegawa ◽

Akiomi Ushida ◽

Hiroshige Uchiyama ◽

Takatsne Narumi

Keyword(s):

Flow Rate ◽

Constant Pressure ◽

Pure Water ◽

Pressure Differential ◽

Flow Rates ◽

Elapsed Time ◽

Incipient Stage ◽

City Water

Flow rates under some pressure differentials were measured for the flow of water through micro-orifices. It was found that the flow rate decreases as the time has elapsed after inception of the flow under a constant pressure differential and that the decrease in flow rates is larger for city water than for pure water, and the gold orifice provides a less decrease with time in flow rates than the nickel orifice, although the flow rate at the incipient stage of the experimental run is lower in the gold orifice than in the nickel orifice.

Download Full-text

GROWTH AND PROTEIN CONTENT OF Ulva prolifera MAINTAINED AT DIFFERENT FLOW RATES IN INTEGRATED AQUACULTURE SYSTEM

Jurnal Ilmu dan Teknologi Kelautan Tropis ◽

10.29244/jitkt.v9i2.19257 ◽

2017 ◽

Vol 9 (2) ◽

pp. 429-441

Author(s):

Wastu Ayu Diamahesa ◽

Toshiro Masumoto ◽

Dedi Jusadi ◽

Mia Setiawati

Keyword(s):

Protein Content ◽

Flow Rate ◽

Ammonia Nitrogen ◽

Ulva Prolifera ◽

Average Weight ◽

Flow Rates ◽

Integrated Aquaculture ◽

Aquaculture System ◽

Total Ammonia ◽

The Impact

Efforts to reduce the impact of waste improvement on degradation of water quality can be transferred by utilization of inorganic waste as a source of seaweed nutrition. This study aimed to determine the growth and protein content of Ulva prolifera maintained at different flow rates in integrated aquaculture system. 9 Yellowtail stocked with 5.095 g with an average weight of 566.11±81.51 g were kept in 540 L tank for 24 days, by water flowing at the rate of 10 L min-1. Water from the fish tank was distributed into the sediment tank and go to 6 Ulva tanks with the flow rate of 0.5, 1.0 and 1.5 L min-1. Test parameters measured were growth performance of Yellowtail, biomass of Ulva prolifera, protein content of Ulva prolifera, and total ammonia nitrogen. The measurement results showed that the biomass of fish increased to 5.408 g, then biomass of Ulva increased to 42 g, 156 g and 155 g for flow rate of 0.5 L, 1 L and 1.5 L min-1, respectively. The protein content of Ulva for all the treatments was the same (P> 0.05). A total of ammonia in the tank outlet of Ulva (0.0202 - 0.1137 mg N L-1) were smaller than those were in the inlet (0.0286 - 0.1394 mg N L-1).

Download Full-text

Changes in a river’s regime of a watercourse after a small water reservoir construction

Soil and Water Research ◽

10.17221/23/2019-swr ◽

2019 ◽

Vol 15 (No. 1) ◽

pp. 55-65 ◽

Cited By ~ 1

Author(s):

Rostislav Fiala ◽

Jana Podhrázská ◽

Jana Konečná ◽

Josef Kučera ◽

Petr Karásek ◽

...

Keyword(s):

Flow Rate ◽

Water Reservoir ◽

Vegetation Period ◽

Average Flow Rate ◽

Flow Rates ◽

Average Flow ◽

Small Water ◽

Rate Discharge ◽

Reservoir Construction ◽

Discharge Volume

The paper deals with the analysis of a river’s regime of a small watercourse and the evaluation of its changes after the construction of a small water reservoir. The aim of the work was to analyse 12 years of flow rate measurements at two profiles of a small watercourse, between which a small water reservoir was built, in the middle of the period of the measurements. The analysis uses traditional characteristics (average flow rate, discharge volume), as well as modern indices from applied hydrology (Richards-Baker flashiness index, hydrogram pulse analysis), which study the variability of the flow rate in hourly and daily intervals. The evaluation showed that at the average flow rate, the effect of the water reservoir was the smoothening of the peak flow rates and prolonging the duration of the discharge waves. At higher flow rates, the water reservoir causes a delay in the culmination and in terms of discharge balance causes a decreased discharge volume, in particular during the vegetation period.

Download Full-text

Hydraulic model of a water cooling system in a chemical plant

Collection of Czechoslovak Chemical Communications ◽

10.1135/cccc19880788 ◽

1988 ◽

Vol 53 (4) ◽

pp. 788-806

Author(s):

Miloslav Hošťálek ◽

Jiří Výborný ◽

František Madron

Keyword(s):

Flow Rate ◽

Cooling System ◽

Cooling Water ◽

Graph Algorithm ◽

Automatic Generation ◽

Hydraulic Calculation ◽

Return Flow ◽

Flow Rates ◽

Pressure Losses ◽

Controlled Flow

Steady state hydraulic calculation has been described of an extensive pipeline network based on a new graph algorithm for setting up and decomposition of balance equations of the model. The parameters of the model are characteristics of individual sections of the network (pumps, pipes, and heat exchangers with armatures). In case of sections with controlled flow rate (variable characteristic), or sections with measured flow rate, the flow rates are direct inputs. The interactions of the network with the surroundings are accounted for by appropriate sources and sinks of individual nodes. The result of the calculation is the knowledge of all flow rates and pressure losses in the network. Automatic generation of the model equations utilizes an efficient (vector) fixing of the network topology and predominantly logical, not numerical operations based on the graph theory. The calculation proper utilizes a modification of the model by the method of linearization of characteristics, while the properties of the modified set of equations permit further decrease of the requirements on the computer. The described approach is suitable for the solution of practical problems even on lower category personal computers. The calculations are illustrated on an example of a simple network with uncontrolled and controlled flow rates of cooling water while one of the sections of the network is also a gravitational return flow of the cooling water.

Download Full-text

Geometrical Optimization of a Venturi-Type Microbubble Generator Using CFD Simulation and Experimental Measurements

Designs ◽

10.3390/designs5010004 ◽

2021 ◽

Vol 5 (1) ◽

pp. 4

Author(s):

Dillon Alexander Wilson ◽

Kul Pun ◽

Poo Balan Ganesan ◽

Faik Hamad

Keyword(s):

Water Flow ◽

Flow Rate ◽

Cfd Simulation ◽

Air Flow ◽

Bubble Diameter ◽

Diameter Ratio ◽

Experimental Measurements ◽

Cfd Model ◽

Flow Rates ◽

Throat Diameter

Microbubble generators are of considerable importance to a range of scientific fields from use in aquaculture and engineering to medical applications. This is due to the fact the amount of sea life in the water is proportional to the amount of oxygen in it. In this paper, experimental measurements and computational Fluid Dynamics (CFD) simulation are performed for three water flow rates and three with three different air flow rates. The experimental data presented in the paper are used to validate the CFD model. Then, the CFD model is used to study the effect of diverging angle and throat length/throat diameter ratio on the size of the microbubble produced by the Venturi-type microbubble generator. The experimental results showed that increasing water flow rate and reducing the air flow rate produces smaller microbubbles. The prediction from the CFD results indicated that throat length/throat diameter ratio and diffuser divergent angle have a small effect on bubble diameter distribution and average bubble diameter for the range of the throat water velocities used in this study.

Download Full-text

A Multi-Branch U-Net for Steel Surface Defect Type and Severity Segmentation

Metals ◽

10.3390/met11060870 ◽

2021 ◽

Vol 11 (6) ◽

pp. 870

Author(s):

Robby Neven ◽

Toon Goedemé

Keyword(s):

Process Parameters ◽

Visual Inspection ◽

Steel Surface ◽

Surface Defect ◽

State Of The Art ◽

Sheet Steel ◽

Real Life ◽

Single Task ◽

Severity Estimation ◽

Task Model

Automating sheet steel visual inspection can improve quality and reduce costs during its production. While many manufacturers still rely on manual or traditional inspection methods, deep learning-based approaches have proven their efficiency. In this paper, we go beyond the state-of-the-art in this domain by proposing a multi-task model that performs both pixel-based defect segmentation and severity estimation of the defects in one two-branch network. Additionally, we show how incorporation of the production process parameters improves the model’s performance. After manually constructing a real-life industrial dataset, we first implemented and trained two single-task models performing the defect segmentation and severity estimation tasks separately. Next, we compared this to a multi-task model that simultaneously performs the two tasks at hand. By combining the tasks into one model, both segmentation tasks improved by 2.5% and 3% mIoU, respectively. In the next step, we extended the multi-task model using sensor fusion with process parameters. We demonstrate that the incorporation of the process parameters resulted in a further mIoU increase of 6.8% and 2.9% for the defect segmentation and severity estimation tasks, respectively.

Download Full-text

Comparison of different models to calculate the viscosity of biogas and biomethane in order to accurately measure flow rates for conformity assessment

Scientific Reports ◽

10.1038/s41598-021-81052-7 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Karine Arrhenius ◽

Oliver Büker

Keyword(s):

Binary Mixtures ◽

Flow Rate ◽

Correction Method ◽

Gas Mixtures ◽

Conformity Assessment ◽

Flow Rates ◽

Unknown Composition

AbstractThe study presents an optimised method to correct flow rates measured with a LFE flowmeter pre-set on methane while used for gas mixtures of unknown composition at the time of the measurement. The method requires the correction of the flow rate using a factor based on the viscosity of the gas mixtures once the composition is accurately known. The method has several different possible applications inclusive for the sampling of biogas and biomethane onto sorbent tubes for conformity assessment for the determination of siloxanes, terpenes and VOC in general. Five models for the calculation of the viscosity of the gas mixtures were compared and the models were used for ten binary mixtures and four multi-component mixtures. The results of the evaluation of the different models showed that the correction method using the viscosity of the mixtures calculated with the model of Reichenberg and Carr showed the smallest biases for binary mixtures. For multi-component mixtures, the best results were obtained when using the models of Lucas and Carr.

Download Full-text

Assessment of the Use of Humidified Nasal Cannulas for Oxygen Therapy in Patients with Epistaxis

ORL ◽

10.1159/000514460 ◽

2021 ◽

pp. 1-5

Author(s):

Jingjing Liu ◽

Tengfang Chen ◽

Zhenggang Lv ◽

Dezhong Wu

Keyword(s):

Flow Rate ◽

Oxygen Therapy ◽

Preliminary Investigation ◽

Nasal Cannula ◽

Low Flow ◽

Antiplatelet Drugs ◽

Flow Rates ◽

The Past ◽

Oxygen Inhalation ◽

Significant Difference

Introduction: In China, nasal cannula oxygen therapy is typically humidified. However, it is difficult to decide whether to suspend nasal cannula oxygen inhalation after the nosebleed has temporarily stopped. Therefore, we conducted a preliminary investigation on whether the use of humidified nasal cannulas in our hospital increases the incidence of epistaxis. Methods: We conducted a survey of 176,058 inpatients in our hospital and other city branches of our hospital over the past 3 years and obtained information concerning their use of humidified nasal cannulas for oxygen inhalation, nonhumidified nasal cannulas, anticoagulant and antiplatelet drugs, and oxygen inhalation flow rates. This information was compared with the data collected at consultation for epistaxis during these 3 years. Results: No significant difference was found between inpatients with humidified nasal cannulas and those without nasal cannula oxygen therapy in the incidence of consultations due to epistaxis (χ2 = 1.007, p > 0.05). The same trend was observed among hospitalized patients using anticoagulant and antiplatelet drugs (χ2 = 2.082, p > 0.05). Among the patients with an inhaled oxygen flow rate ≥5 L/min, the incidence of ear-nose-throat (ENT) consultations due to epistaxis was 0. No statistically significant difference was found between inpatients with a humidified oxygen inhalation flow rate <5 L/min and those without nasal cannula oxygen therapy in the incidence of ENT consultations due to epistaxis (χ2 = 0.838, p > 0.05). A statistically significant difference was observed in the incidence of ENT consultations due to epistaxis between the low-flow nonhumidified nasal cannula and nonnasal cannula oxygen inhalation groups (χ2 = 18.428, p < 0.001). The same trend was observed between the 2 groups of low-flow humidified and low-flow nonhumidified nasal cannula oxygen inhalation (χ2 = 26.194, p < 0.001). Discussion/Conclusion: Neither high-flow humidified nasal cannula oxygen inhalation nor low-flow humidified nasal cannula oxygen inhalation will increase the incidence of recurrent or serious epistaxis complications; the same trend was observed for patients who use anticoagulant and antiplatelet drugs. Humidification during low-flow nasal cannula oxygen inhalation can prevent severe and repeated epistaxis to a certain extent.

Download Full-text

Net-exergetic, hydraulic and thermal optimization of coaxial heat exchangers using fixed flow conditions instead of fixed flow rates

Geothermal Energy ◽

10.1186/s40517-021-00201-3 ◽

2021 ◽

Vol 9 (1) ◽

Author(s):

Tobias Blanke ◽

Markus Hagenkamp ◽

Bernd Döring ◽

Joachim Göttsche ◽

Vitali Reger ◽

...

Keyword(s):

Reynolds Number ◽

Laminar Flow ◽

Mass Flow ◽

Flow Rate ◽

Heat Exchangers ◽

Circular Ring ◽

Flow Conditions ◽

Flow Rates ◽

Mass Flow Rates ◽

Pipe Radius

AbstractPrevious studies optimized the dimensions of coaxial heat exchangers using constant mass flow rates as a boundary condition. They show a thermal optimal circular ring width of nearly zero. Hydraulically optimal is an inner to outer pipe radius ratio of 0.65 for turbulent and 0.68 for laminar flow types. In contrast, in this study, flow conditions in the circular ring are kept constant (a set of fixed Reynolds numbers) during optimization. This approach ensures fixed flow conditions and prevents inappropriately high or low mass flow rates. The optimization is carried out for three objectives: Maximum energy gain, minimum hydraulic effort and eventually optimum net-exergy balance. The optimization changes the inner pipe radius and mass flow rate but not the Reynolds number of the circular ring. The thermal calculations base on Hellström’s borehole resistance and the hydraulic optimization on individually calculated linear loss of head coefficients. Increasing the inner pipe radius results in decreased hydraulic losses in the inner pipe but increased losses in the circular ring. The net-exergy difference is a key performance indicator and combines thermal and hydraulic calculations. It is the difference between thermal exergy flux and hydraulic effort. The Reynolds number in the circular ring is instead of the mass flow rate constant during all optimizations. The result from a thermal perspective is an optimal width of the circular ring of nearly zero. The hydraulically optimal inner pipe radius is 54% of the outer pipe radius for laminar flow and 60% for turbulent flow scenarios. Net-exergetic optimization shows a predominant influence of hydraulic losses, especially for small temperature gains. The exact result depends on the earth’s thermal properties and the flow type. Conclusively, coaxial geothermal probes’ design should focus on the hydraulic optimum and take the thermal optimum as a secondary criterion due to the dominating hydraulics.

Download Full-text

Effects of Sprinkler Flow Rate on Physiological, Behavioral and Production Responses of Nili Ravi Buffaloes during Subtropical Summer

Animals ◽

10.3390/ani11020339 ◽

2021 ◽

Vol 11 (2) ◽

pp. 339

Author(s):

Musa Bah ◽

Muhammad Afzal Rashid ◽

Khalid Javed ◽

Talat Naseer Pasha ◽

Muhammad Qamer Shahid

Keyword(s):

Heat Stress ◽

Milk Yield ◽

Flow Rate ◽

Rectal Temperature ◽

Latin Square ◽

Flow Rates ◽

Group Water ◽

Humidity Index ◽

Daily Milk Yield ◽

Daily Milk

Water buffaloes wallow in water to combat heat stress during summer. With the decreasing reservoirs for wallowing, the farmers use sprinklers to cool the buffaloes in Pakistan. These sprinklers use a large quantity of groundwater, which is becoming scarce. The objective of the current study was to determine the effect of different sprinkler flow rates on the physiological, behavioral, and production responses of Nili Ravi buffaloes during summer. Eighteen buffaloes were randomly subjected to three sprinkler flow rate treatments in a double replicated 3 × 3 Latin square design. The flow rates were 0.8, 1.25, and 2.0 L/min. During the study, the average afternoon temperature humidity index was 84.6. The 1.25 and 2.0 L/min groups had significantly lower rectal temperature and respiratory rates than the 0.8 L/min group. Water intake was significantly higher in the 0.8 L/min group. Daily milk yield was higher in the 1.25 and 2.0 L/min groups than in the 0.8 L/min group. These results suggested that the sprinkler flow rates > 0.8 L/min effectively cooled the buffaloes. The sprinkler flow rate of 1.25 L/min appeared to be more efficient, as it used 37.5% less water compared to the 2.0 L/min.

Download Full-text