Study on the indoor environmental performance of complex insulation material: Carbonized rice hull and glass wool

2016 ◽  
Vol 27 (1) ◽  
pp. 109-120 ◽  
Author(s):  
Cheng-Ri Yin ◽  
Dongwoo Yeom ◽  
Kyu-In Lee
Keyword(s):  
Indoor Environment ◽  
Environmental Control ◽  
Glass Wool ◽  
Rice Hull ◽  
Insulation Material ◽  
Control Performance ◽  
The Difference ◽  
The Stability ◽  
Insulation Wall ◽  
Indoor Humidity

The purpose of this study is to make a complex insulation material with carbonized rice hull and glass wool and to verify the environmental control performance. Full-scale experimental mock-ups were constructed, and the control performance in an indoor environment was compared and verified through monitoring experiments. The complex insulation mock-up showed a relatively high temperature during spring, summer and autumn. The difference in the heat storage capacity of the materials was the cause for this difference. Also, the complex insulation material was proven as more effective at maintaining the stability of the indoor environment and temperature during spring, summer and autumn. In addition, the complex insulation was able to control the indoor humidity at a comfortable level during every season. Our results have therefore verified that the carbonized rice hull was effective at controlling the indoor humidity. When compared with the pure carbonized rice hull insulation, the complex insulation wall was relatively thin; therefore, more net indoor area could be achieved by using the complex insulation material. In addition, if self-produced, the complex insulation could be economically more feasible. Therefore, this complex material was synthetically proven to have merits for insulation of lightweight timber houses for thermal comfort of occupants.

Comparative Study of Microclimate Diversity and Transition Characteristics Focused on the Living Environment in the Cold-Winter and Hot-Summer Area of China

2013 ◽  
Vol 409-410 ◽  
pp. 695-698
Author(s):  
Zu Kang Lei ◽  
Zhi Qiang Gao
Keyword(s):  
Indoor Environment ◽  
Building Envelope ◽  
Living Environment ◽  
Cold Winter ◽  
Interior Spaces ◽  
Living Space ◽  
Air Temperatures ◽  
The Difference ◽  
The Stability ◽  
Main Factor

This article surveys mainly the microclimate diversity and transition characteristics of air temperatures and relative humiditys differences between exterior and different interior spaces at a typical Chinese residence in the cold-winter and hot-summer area by summer and winter, which is under the situation without air conditioning. According to the results, building envelope is the main factor of affecting the stability of indoor environment, limited impact on the relative humidity. The closed state of living space and ventilation are also the origin of causing the difference of RH.

Use of a Lyophilized Reference Plasma to Compare Coagulation Test Procedures

1975 ◽  
Vol 34 (02) ◽  
pp. 426-444 ◽  
Author(s):  
J Kahan ◽  
I Nohén
Keyword(s):  
Oral Anticoagulant Therapy ◽  
Repeated Measurements ◽  
Test Procedures ◽  
Coagulation Activity ◽  
Close Relationship ◽  
Measured Activity ◽  
Test Materials ◽  
The Difference ◽  
The Stability ◽  
The One

SummaryIn 4 collaborative trials, involving a varying number of hospital laboratories in the Stockholm area, the coagulation activity of different test materials was estimated with the one-stage prothrombin tests routinely used in the laboratories, viz. Normotest, Simplastin-A and Thrombotest. The test materials included different batches of a lyophilized reference plasma, deep-frozen specimens of diluted and undiluted normal plasmas, and fresh and deep-frozen specimens from patients on long-term oral anticoagulant therapy.Although a close relationship was found between different methods, Simplastin-A gave consistently lower values than Normotest, the difference being proportional to the estimated activity. The discrepancy was of about the same magnitude on all the test materials, and was probably due to a divergence between the manufacturers’ procedures used to set “normal percentage activity”, as well as to a varying ratio of measured activity to plasma concentration. The extent of discrepancy may vary with the batch-to-batch variation of thromboplastin reagents.The close agreement between results obtained on different test materials suggests that the investigated reference plasma could be used to calibrate the examined thromboplastin reagents, and to compare the degree of hypocoagulability estimated by the examined PIVKA-insensitive thromboplastin reagents.The assigned coagulation activity of different batches of the reference plasma agreed closely with experimentally obtained values. The stability of supplied batches was satisfactory as judged from the reproducibility of repeated measurements. The variability of test procedures was approximately the same on different test materials.

In the stability of paints and varnishes for protective and decorative wood finish

2016 ◽  
Author(s):  
Ю.И. Цой
Keyword(s):  
Organic Solvents ◽  
Evaluation Criteria ◽  
Ternary Systems ◽  
Solubility Parameters ◽  
Formaldehyde Resin ◽  
Film Forming ◽  
The Difference ◽  
Molecular Forces ◽  
The Stability ◽  
Thermodynamic Interaction

Задача получения однородного состава ЛКМ сводится к правильному выбору пленкообразователей и соответствующих растворителей и, в случае необходимости, разбавителей и добавок. На основе положений теории растворимости была проведена оценка совместимости компонентов и стабильности таких систем. Критериями оценки были приняты параметры растворимости и термодинамического взаимодействия. Исследовали совместимость алкидных лаков с аминоформальдегидными смолами в бутаноле, и результаты этих исследований представлены в треугольной фазовой диаграмме. Для оценки совместимости смол по результатам расчета параметров термодинамического взаимодействия были построены спинодали для тройных систем. Как показывает анализ результатов проведенных исследований, даже при большой разности ?? = |?12 – ?13| = 0,2 наблюдается небольшая область несовместимости. С уменьшением разности ?? область несовместимости сужается. При ?23 > ?с область несовместимости расширяется как для ? = 0,2, так и для ?? = 0,1 и ?? = 0. Таким образом, для таких систем на совместимость компонентов, в первую очередь, влияет их взаимодействие между собой – чем оно больше, тем лучше они совместимы. Проведенные исследования показали, что парциальные параметры растворимости, учитывающие природу когезионных сил, более объективно характеризуют растворимость пленкообразующих смол в органических растворителях, чем их общий параметр растворимости. Растворимость пленкообразующих алкидных и этерифицированных аминоформальдегидных смол в органических растворителях обусловлена термодинамическим взаимодействием молекулярных сил различной природы. Стабильность смеси алкидной и этерифицированной аминоформальдегидной смолы в бутаноле обусловлена в большей степени термодинамическим взаимодействием молекулярных сил; при этом степень бутанолизации меламиноформальдегидной смолы оказывает наибольшее влияние на стабильность cистемы. Проведенные исследования по стабильности лакокрасочных смесей из различных пленкообразующих смол на основе рассмотренных критериев оценки могут быть использованы для совершенствования технологии защитно-декоративной отделки древесины. The problem of obtaining a homogeneous composition of the coatings is reduced to the proper selection of film-forming agents, and diluent and, if appropriate, diluents and additives. On the basis of the theory of solubility, we have carried out the assessment of the compatibility of the components and stability of such systems. The evaluation criteria were adopted the parameters of the solubility and thermodynamic interaction. Researched the compatibility with alkyd varnishes aminoformaldehyde resin in butanol, and the results of these studies are presented in the triangular phase diagram. To evaluate the compatibility of the resins according to the results of calculation of thermodynamic parameters of interaction were built spinodal for ternary systems. As the analysis of the results of the studies, even when the difference ??|?12 – ?13| = 0,2 there is a small area of incompatibility. With the decrease of the difference ? ? region incompatibility narrows. When ?23> ?с region incompatibility extends to ?? = 0,2, and for ?? = 0.1 and ?? = 0. Thus, for such systems, compatibility of components, primarily, affects their interaction with each other – the further away it is, the better they are compatible. Studies have shown that the partial solubility parameters, which take into account the nature of cohesive forces, more objectively characterize the solubility of film-forming resins in organic solvents than their total solubility parameter. The solubility and film-forming aminoformaldehyde esterified alkyd resins in organic solvents due to thermodynamic interaction of molecular forces of different nature. Тhe stability of the mixture and aminoformaldehyde esterified alkyd resin in butanol is generated largely by thermodynamic forces of molecular interaction; the degree of butanolate melamine-formaldehyde resin has the greatest effect on the stability of the system. Conducted research on the stability of the paint mixtures of various film-forming resins on the basis of the evaluation criteria can be used to improve the technology of protective and decorative wood finish.

Stability and mutual impact of perception of parental pressure and infants' social support – A study based on the difference between employment status and household income

2021 ◽  
pp. 002072092199705
Author(s):  
Yong Wang
Keyword(s):  
Household Income ◽  
Employment Status ◽  
Working Mothers ◽  
Social Research ◽  
Research Report ◽  
Parental Pressure ◽  
Income Levels ◽  
Significant Difference ◽  
The Difference ◽  
The Stability

The purpose of this study is to explore the stability and interaction between parental pressure and social research report, as well as the role of employment status and family income levels in this process. This study used a special study on Korean children (PSKC) 2–4 waves. Use t-test, correlation and autoregressive cross-delay modeling to analyze the data. The main findings of this study are: First, over time, parental pressure and mother’s social research report are consistent. Secondly, the pressure of motherhood and childcare has an obvious lagging effect on upbringing, and vice versa. Third, there is no significant difference between working mothers and non-working mothers in terms of the stability of working parents' pressure, social research report and social research report for children's pressure channels. However, parental pressure can only predict the social research report of working mothers. Fourth, there is no significant difference between the stability and interaction of these two structures in household income levels. In short, the results show that, over time, parental pressure is consistent with mother’s social research report. The results also show that there is a significant cross-lag effect between the mothers’ perceptions of mutual pressure analysis. In the process from parental pressure to social research report, I found the difference between working and non-working mothers. The advantage of this study is that the expected longitudinal design was adopted during infancy and the priority between the two structures can be considered. The results of this study can be used as a source of intervention plans to help parents withstand severe parenting pressure and lack of social research report.

scholarly journals A Semi-Theoretical Model for Water Condensation: Dew Used in Conservation of Earthen Heritage Sites

Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 52
Author(s):  
Xiang He ◽  
Sijia Wang ◽  
Bingjian Zhang
Keyword(s):  
Mass Transfer ◽  
Theoretical Model ◽  
Field Experiments ◽  
Environmental Control ◽  
Mass Transfer Process ◽  
Formation Processes ◽  
Heritage Sites ◽  
Dew Formation ◽  
The Difference ◽  
Two Parameter

Dew is a common but important phenomenon. Though water is previously considered to be a threat to earthen heritage sites, artificial dew is showing potential in relic preservation. A model of dew prediction on earthen sites will be essential for developing preventive protection methods, but studies of dew formation processes on relics are limited. In this study, a two parameter model is proposed. It makes approximations according to the features of earthen heritage sites, assuming that a thin and steady air layer exists close to the air–solid interface. This semi-theoretical model was based on calculations of the mass transfer process in the air layer, and was validated by simulations of laboratory experiments (R > 0.9) as well as field experiments. Additionally, a numerical simulation, performed by the commercial software COMSOL, confirmed that the difference between fitting parameter δ and the thickness of assumed mass transfer field was not significant. This model will be helpful in developing automatic environmental control systems for stabilizing water and soluble salts, thus enhancing preventive protection of earthen heritage sites.

scholarly journals Modeling and Analysis of BDS-2 and BDS-3 Combined Precise Time and Frequency Transfer Considering Stochastic Models of Inter-System Bias

2021 ◽  
Vol 13 (4) ◽  
pp. 793
Author(s):  
Guoqiang Jiao ◽  
Shuli Song ◽  
Qinming Chen ◽  
Chao Huang ◽  
Ke Su ◽  
...  
Keyword(s):  
Stochastic Models ◽  
Satellite System ◽  
Modeling And Analysis ◽  
System Bias ◽  
Frequency Transfer ◽  
Global Navigation ◽  
The Difference ◽  
The Stability ◽  
Global Navigation Satellite ◽  
Precise Time

BeiDou global navigation satellite system (BDS) began to provide positioning, navigation, and timing (PNT) services to global users officially on 31 July, 2020. BDS constellations consist of regional (BDS-2) and global navigation satellites (BDS-3). Due to the difference of modulations and characteristics for the BDS-2 and BDS-3 default civil service signals (B1I/B3I) and the increase of new signals (B1C/B2a) for BDS-3, a systemically bias exists in the receiver-end when receiving and processing BDS-2 and BDS-3 signals, which leads to the inter-system bias (ISB) between BDS-2 and BDS-3 on the receiver side. To fully utilize BDS, the BDS-2 and BDS-3 combined precise time and frequency transfer are investigated considering the effect of the ISB. Four kinds of ISB stochastic models are presented, which are ignoring ISB (ISBNO), estimating ISB as random constant (ISBCV), random walk process (ISBRW), and white noise process (ISBWN). The results demonstrate that the datum of receiver clock offsets can be unified and the ISB deduced datum confusion can be avoided by estimating the ISB. The ISBCV and ISBRW models are superior to ISBWN. For the BDS-2 and BDS-3 combined precise time and frequency transfer using ISBNO, ISBCV, ISBRW, and ISBWN, the stability of clock differences of old signals can be enhanced by 20.18%, 23.89%, 23.96%, and 11.46% over BDS-2-only, respectively. For new signals, the enhancements are −50.77%, 20.22%, 17.53%, and −3.69%, respectively. Moreover, ISBCV and ISBRW models have the better frequency transfer stability. Consequently, we recommended the optimal ISBCV or suboptimal ISBRW model for BDS-2 and BDS-3 combined precise time and frequency transfer when processing the old as well as the new signals.

scholarly journals Some remarks on the stability of the Cauchy equation and completeness

2021 ◽  
Author(s):  
Harald Fripertinger ◽  
Jens Schwaiger
Keyword(s):  
Normed Space ◽  
Additive Function ◽  
Functional Equations ◽  
Constant Function ◽  
Cauchy Equation ◽  
Cauchy Difference ◽  
International Conference ◽  
The Difference ◽  
The Stability ◽  
The Given

AbstractIt was proved in Forti and Schwaiger (C R Math Acad Sci Soc R Can 11(6):215–220, 1989), Schwaiger (Aequ Math 35:120–121, 1988) and with different methods in Schwaiger (Developments in functional equations and related topics. Selected papers based on the presentations at the 16th international conference on functional equations and inequalities, ICFEI, Bȩdlewo, Poland, May 17–23, 2015, Springer, Cham, pp 275–295, 2017) that under the assumption that every function defined on suitable abelian semigroups with values in a normed space such that the norm of its Cauchy difference is bounded by a constant (function) is close to some additive function, i.e., the norm of the difference between the given function and that additive function is also bounded by a constant, the normed space must necessarily be complete. By Schwaiger (Ann Math Sil 34:151–163, 2020) this is also true in the non-archimedean case. Here we discuss the situation when the bound is a suitable non-constant function.

The Effect of Electromagnetic Pulse Treatment on Thin – Wall Bearing Ferrules Dimensional Accuracy

2014 ◽  
Vol 887-888 ◽  
pp. 1328-1332
Author(s):  
Wang Biao Qiu ◽  
Wei Xing Chen
Keyword(s):  
Residual Stress ◽  
Electromagnetic Pulse ◽  
Optical Measurement ◽  
Dimensional Accuracy ◽  
Magnetic Treatment ◽  
Thin Wall ◽  
Pulse Treatment ◽  
The Difference ◽  
The Stability ◽  
Frequency Pulse

The article based on different frequency pulse equiponderance electromagnetic destressing comparison experiment, using vertical optical measurement to survey the changes of bearing ferrules size, study the difference between the effect of different frequency electromagnetic in removing residual stress, find the frequency of magnetic treatment pulse that help to maintain the stability of the thin-wall bearing collars' size, effectively improve the cycle of bearing ferrules process .

scholarly journals A Novel Approach to Fabricate Foam Ceramics from Steel Slag

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Yu Zheng ◽  
Xudong Luo ◽  
Jinlong Yang ◽  
Wenlong Huo ◽  
Chi Kang
Keyword(s):  
Compressive Strength ◽  
Ph Value ◽  
Steel Slag ◽  
Raw Material ◽  
Solid Loading ◽  
Insulation Material ◽  
Ceramic Foams ◽  
Novel Approach ◽  
The Stability ◽  
First Time

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material.

Sign in / Sign up

Export Citation Format

Share Document