Comparison of common machine learning algorithms trained with multi-zone models for identifying the location and strength of indoor pollutant sources

2020 ◽  
pp. 1420326X2093157
Author(s):  
Yu Huang ◽  
Zhi Gao ◽  
Hongguang Zhang
Keyword(s):  
Machine Learning ◽  
Meteorological Parameters ◽  
Human Life ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Identification Accuracy ◽  
Sensor Data ◽  
Support Vector ◽  
Accurate Identification ◽  
Pollutant Sources

The accurate identification of the characteristics of pollutant sources can effectively prevent the loss of human life and property damage caused by the sudden release of harmful chemicals in emergency situations. Machine learning algorithms, artificial neural network (ANN), support vector machine (SVM), k-nearest neighbour (KNN) and naive Bayesian (NB) classification can be used to identify the location of pollutant sources with limited sensor data inputs. In this study, the identification accuracy of the four above-mentioned machine learning algorithms was investigated and compared, considering the different sensor layouts, eigenvector inputs, meteorological parameters and number of samples. The results show that the collection of pollutant concentrations over an extended period of time could improve identification accuracy. Additional sensors were required to reach the same identification accuracy after the introduction of distributed meteorological parameters. Increasing the number of trained samples by a factor of five improved the identification accuracy of KNN by 22% and that of SVM by 1.7%; however, ANN and NB classification remained basically unchanged. When identifying the release mass of the pollutant source, multiple linear, ANN and SVM regression models were adopted. Results show that ANN performs best, whereas SVM provides the least optimal performance.

scholarly journals Classification of Children’s Sitting Postures Using Machine Learning Algorithms

2018 ◽  
Vol 8 (8) ◽  
pp. 1280 ◽  
Author(s):  
Yong Kim ◽  
Youngdoo Son ◽  
Wonjoon Kim ◽  
Byungki Jin ◽  
Myung Yun
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Monitoring System ◽  
Multinomial Logistic Regression ◽  
Learning Algorithms ◽  
Feedback System ◽  
Machine Learning Algorithms ◽  
Sensor Data ◽  
Future Research ◽  
Support Vector

Sitting on a chair in an awkward posture or sitting for a long period of time is a risk factor for musculoskeletal disorders. A postural habit that has been formed cannot be changed easily. It is important to form a proper postural habit from childhood as the lumbar disease during childhood caused by their improper posture is most likely to recur. Thus, there is a need for a monitoring system that classifies children’s sitting postures. The purpose of this paper is to develop a system for classifying sitting postures for children using machine learning algorithms. The convolutional neural network (CNN) algorithm was used in addition to the conventional algorithms: Naïve Bayes classifier (NB), decision tree (DT), neural network (NN), multinomial logistic regression (MLR), and support vector machine (SVM). To collect data for classifying sitting postures, a sensing cushion was developed by mounting a pressure sensor mat (8 × 8) inside children’s chair seat cushion. Ten children participated, and sensor data was collected by taking a static posture for the five prescribed postures. The accuracy of CNN was found to be the highest as compared with those of the other algorithms. It is expected that the comprehensive posture monitoring system would be established through future research on enhancing the classification algorithm and providing an effective feedback system.

scholarly journals Prediction of Cardiovascular Disease using Machine Learning Algorithms

2020 ◽  
Vol 9 (3) ◽  
pp. 2404-2414
Keyword(s):  
Machine Learning ◽  
Cardiovascular Disease ◽  
Logistic Regression ◽  
Human Life ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Noise Data ◽  
The Individual

Background/Aim: Healthcare is an unavoidable assignment to be done in human life. Cardiovascular sickness is a general class for a scope of infections that are influencing heart and veins. The early strategies for estimating the cardiovascular sicknesses helped in settling on choices about the progressions to have happened in high-chance patients which brought about the decrease of their dangers. Methods: In the proposed research, we have considered informational collection from kaggle and it doesn't require information pre-handling systems like the expulsion of noise data, evacuation of missing information, filling default esteems if applicable and classification of attributes for prediction and decision making at different levels. The performance of the diagnosis model is obtained by using methods like classification, accuracy, sensitivity and specificity analysis. This paper proposes a prediction model to predict whether a people have a cardiovascular disease or not and to provide an awareness or diagnosis on that. This is done by comparing the accuracies of applying rules to the individual results of Support Vector Machine, Random forest, Naive Bayes classifier and logistic regression on the dataset taken in a region to present an accurate model of predicting cardiovascular disease. Results: The machine learning algorithms under study were able to predict cardiovascular disease in patients with accuracy between 58.71% and 77.06%. Conclusions: It was shown that Logistic Regression has better Accuracy (77.06 %) when compared to different Machine-learning Algorithms.

Operational Data to Maintenance Optimization: Closing the Loop in Offshore Wind O&M

2018 ◽  
Author(s):  
Alexios Koltsidopoulos Papatzimos ◽  
Tariq Dawood ◽  
Philipp R. Thies
Keyword(s):  
Machine Learning ◽  
Wind Farm ◽  
Service Providers ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Offshore Wind ◽  
Sensor Data ◽  
Support Vector ◽  
Offshore Wind Turbine ◽  
Offshore Wind Farm

Offshore wind assets have reached multi-GW scale and additional capacity is being installed and developed. To achieve demanding cost of energy targets, awarded by competitive auctions, the operation and maintenance (O&M) of these assets has to become increasingly efficient, whilst ensuring compliance and effectiveness. Existing offshore wind farm assets generate a significant amount of inhomogeneous data related to O&M processes. These data contain rich information about the condition of the assets, which is rarely fully utilized by the operators and service providers. Academic and industrial research and development efforts have led to a suite of tools trying to apply sensor data and build machine learning models to diagnose, trend and predict component failures. This study presents a decision support framework incorporating a range of different supervised and un-supervised learning algorithms. The aim is to provide guidance for asset owners on how to select the most relevant datasets, apply and choose the different machine learning algorithms and how to integrate the data stream with daily maintenance procedures. The presented methodology is tested on a real case example of an offshore wind turbine gearbox replacement at Teesside offshore wind farm. The study uses k-nearest neighbour (kNN) and support vector machine (SVM) algorithms to detect the fault using supervisory control and data acquisition (SCADA) data and an autoregressive model for the vibration data of the condition monitoring system (CMS). The implementation of all the algorithms has resulted in an accuracy higher than 94%. The results of this paper will be of interest to offshore wind farm developers and operators to streamline and optimize their O&M planning activities for their assets and reduce the associated costs.

scholarly journals Automatic Detection of Faults in Race Walking: A Comparative Analysis of Machine-Learning Algorithms Fed with Inertial Sensor Data

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1461 ◽  
Author(s):  
Juri Taborri ◽  
Eduardo Palermo ◽  
Stefano Rossi
Keyword(s):  
Machine Learning ◽  
Inertial Sensors ◽  
Inertial Sensor ◽  
Learning Algorithms ◽  
Automatic Detection ◽  
Machine Learning Algorithms ◽  
Sensor Data ◽  
Support Vector ◽  
Angular Velocities ◽  
Race Walking

The validity of results in race walking is often questioned due to subjective decisions in the detection of faults. This study aims to compare machine-learning algorithms fed with data gathered from inertial sensors placed on lower-limb segments to define the best-performing classifiers for the automatic detection of illegal steps. Eight race walkers were enrolled and linear accelerations and angular velocities related to pelvis, thighs, shanks, and feet were acquired by seven inertial sensors. The experimental protocol consisted of two repetitions of three laps of 250 m, one performed with regular race walking, one with loss-of-contact faults, and one with knee-bent faults. The performance of 108 classifiers was evaluated in terms of accuracy, recall, precision, F1-score, and goodness index. Generally, linear accelerations revealed themselves as more characteristic with respect to the angular velocities. Among classifiers, those based on the support vector machine (SVM) were the most accurate. In particular, the quadratic SVM fed with shank linear accelerations was the best-performing classifier, with an F1-score and a goodness index equal to 0.89 and 0.11, respectively. The results open the possibility of using a wearable device for automatic detection of faults in race walking competition.

scholarly journals Hierarchical Tactile Sensation Integration from Prosthetic Fingertips Enables Multi-Texture Surface Recognition

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4324
Author(s):  
Moaed A. Abd ◽  
Rudy Paul ◽  
Aparna Aravelli ◽  
Ou Bai ◽  
Leonel Lagos ◽  
...  
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Sliding Contact ◽  
Tactile Sensation ◽  
Support Vector ◽  
Textured Surfaces ◽  
K Nearest Neighbor ◽  
Tactile Sensors ◽  
Time Frequency

Multifunctional flexible tactile sensors could be useful to improve the control of prosthetic hands. To that end, highly stretchable liquid metal tactile sensors (LMS) were designed, manufactured via photolithography, and incorporated into the fingertips of a prosthetic hand. Three novel contributions were made with the LMS. First, individual fingertips were used to distinguish between different speeds of sliding contact with different surfaces. Second, differences in surface textures were reliably detected during sliding contact. Third, the capacity for hierarchical tactile sensor integration was demonstrated by using four LMS signals simultaneously to distinguish between ten complex multi-textured surfaces. Four different machine learning algorithms were compared for their successful classification capabilities: K-nearest neighbor (KNN), support vector machine (SVM), random forest (RF), and neural network (NN). The time-frequency features of the LMSs were extracted to train and test the machine learning algorithms. The NN generally performed the best at the speed and texture detection with a single finger and had a 99.2 ± 0.8% accuracy to distinguish between ten different multi-textured surfaces using four LMSs from four fingers simultaneously. The capability for hierarchical multi-finger tactile sensation integration could be useful to provide a higher level of intelligence for artificial hands.

Machine Learning Models for Finger Bend Evaluation using Implemented Low cost Flex Sensor

2021 ◽  
Vol 9 (VI) ◽  
pp. 3605-3611
Author(s):  
Pratyush Kaware
Keyword(s):  
Machine Learning ◽  
Support Vector Machine ◽  
Low Cost ◽  
Learning Algorithms ◽  
Cost Effective ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Learning Models ◽  
Machine Learning Models

In this paper a cost-effective sensor has been implemented to read finger bend signals, by attaching the sensor to a finger, so as to classify them based on the degree of bent as well as the joint about which the finger was being bent. This was done by testing with various machine learning algorithms to get the most accurate and consistent classifier. Finally, we found that Support Vector Machine was the best algorithm suited to classify our data, using we were able predict live state of a finger, i.e., the degree of bent and the joints involved. The live voltage values from the sensor were transmitted using a NodeMCU micro-controller which were converted to digital and uploaded on a database for analysis.

scholarly journals Heart disease prediction using machine learning techniques : a survey

2018 ◽  
Vol 7 (2.8) ◽  
pp. 684 ◽  
Author(s):  
V V. Ramalingam ◽  
Ayantan Dandapath ◽  
M Karthik Raja
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Complex Data ◽  
Learning Techniques ◽  
Vector Machines ◽  
Supervised Learning Algorithms ◽  
Life Threatening

Heart related diseases or Cardiovascular Diseases (CVDs) are the main reason for a huge number of death in the world over the last few decades and has emerged as the most life-threatening disease, not only in India but in the whole world. So, there is a need of reliable, accurate and feasible system to diagnose such diseases in time for proper treatment. Machine Learning algorithms and techniques have been applied to various medical datasets to automate the analysis of large and complex data. Many researchers, in recent times, have been using several machine learning techniques to help the health care industry and the professionals in the diagnosis of heart related diseases. This paper presents a survey of various models based on such algorithms and techniques andanalyze their performance. Models based on supervised learning algorithms such as Support Vector Machines (SVM), K-Nearest Neighbour (KNN), NaïveBayes, Decision Trees (DT), Random Forest (RF) and ensemble models are found very popular among the researchers.

scholarly journals Feature Selection and Comparison of Machine Learning Algorithms in Classification of Grazing and Rumination Behaviour in Sheep

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3532 ◽  
Author(s):  
Nicola Mansbridge ◽  
Jurgen Mitsch ◽  
Nicola Bollard ◽  
Keith Ellis ◽  
Giuliana Miguel-Pacheco ◽  
...  
Keyword(s):  
Machine Learning ◽  
Random Forest ◽  
Time Budget ◽  
Learning Algorithms ◽  
Eating Behaviour ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Optimum Number ◽  
Eating Behaviours ◽  
Adaptive Boosting

Grazing and ruminating are the most important behaviours for ruminants, as they spend most of their daily time budget performing these. Continuous surveillance of eating behaviour is an important means for monitoring ruminant health, productivity and welfare. However, surveillance performed by human operators is prone to human variance, time-consuming and costly, especially on animals kept at pasture or free-ranging. The use of sensors to automatically acquire data, and software to classify and identify behaviours, offers significant potential in addressing such issues. In this work, data collected from sheep by means of an accelerometer/gyroscope sensor attached to the ear and collar, sampled at 16 Hz, were used to develop classifiers for grazing and ruminating behaviour using various machine learning algorithms: random forest (RF), support vector machine (SVM), k nearest neighbour (kNN) and adaptive boosting (Adaboost). Multiple features extracted from the signals were ranked on their importance for classification. Several performance indicators were considered when comparing classifiers as a function of algorithm used, sensor localisation and number of used features. Random forest yielded the highest overall accuracies: 92% for collar and 91% for ear. Gyroscope-based features were shown to have the greatest relative importance for eating behaviours. The optimum number of feature characteristics to be incorporated into the model was 39, from both ear and collar data. The findings suggest that one can successfully classify eating behaviours in sheep with very high accuracy; this could be used to develop a device for automatic monitoring of feed intake in the sheep sector to monitor health and welfare.

Sign in / Sign up

Export Citation Format

Share Document