scholarly journals Semi-active noise control for a hermetic digital scroll compressor

2019 ◽  
Vol 39 (4) ◽  
pp. 1204-1215
Author(s):  
Kan Ye ◽  
Jinchen Ji ◽  
Sam Han
Keyword(s):  
Response Time ◽  
Active Control ◽  
Air Conditioning ◽  
Active Noise Control ◽  
Small Scale ◽  
Control Methods ◽  
Scroll Compressor ◽  
Discharge Valve ◽  
The Impact ◽  
Changing Rate

Hermetic digital scroll compressor has been widely used as a small-scale organic Rankine cycle application in the heating, ventilation, and air conditioning systems. A clunking noise issue is recently found in an air conditioning outdoor unit, and the main cause of the noise is experimentally identified to be the impact of the scrolls in the compressor unit during the switching process. The semi-active control methods are thus designed to greatly reduce the noise level by using additional valves to adjust the pressure changing rate within the modulation chamber. The response time for the impact of the scrolls can then be controlled by the added valves. The additional release valve with a smaller diameter pipe parallel to the main valve is tested firstly for its performance. Slower flow rate is produced and the pipe can extend the response time and decrease the speed of the impact process by reducing the pressure changing rate. The use of a discharge valve is also tested for controlling the pressure changing rate inside the chamber. The discharge valve with an opposite effect to the release valve is found useful for solving the noise issue. Both noise and vibration results confirm that the impact noise in the frequency range of interest can be reduced by using the proposed semi-active control methods.

scholarly journals Evaluation of Three Common Algorithms for Structure Active Control

2017 ◽  
Vol 7 (3) ◽  
pp. 1638-1646
Author(s):  
M. Sareban
Keyword(s):  
Fuzzy Control ◽  
Active Control ◽  
Control Method ◽  
Variable Mass ◽  
Structural Response ◽  
Linear Quadratic Regulator ◽  
Relative Displacement ◽  
Control Methods ◽  
Linear Quadratic ◽  
The Impact

Recently active structure controllers were considered to deal with the impact of earthquake forces and the result of the investigations provided multiple algorithms to calculate force control and many different ways to apply these forces on the structure. In this study, the efficiency and effectiveness of three methods (linear quadratic regulator, fuzzy logic and pole assigning) are investigated. In addition, three buildings with different height classes with an active tuned mass damper (ATMD) on the top floor are considered to compare the active control methods. Examples with known mass and stiffness and with variable mass are considered. The results show that all three control methods used for the ATMD device reduce the structural response. The fuzzy control method, caused a sharp decline in relative displacement of building floors up to 80%. But in LQR and pole allocation procedures the applied force is limited. The best performance of fuzzy control is for high-rise buildings. The three different methods of control are stable in different masses and even under a random change of floor masses, their effectiveness can be trusted.

Active Control of High Order Acoustical Modes in a Semi-Infinite Waveguide

1991 ◽  
Vol 113 (4) ◽  
pp. 523-531 ◽  
Author(s):  
J. D. Stell ◽  
R. J. Bernhard
Keyword(s):  
Control Systems ◽  
Active Control ◽  
Noise Control ◽  
Active Noise Control ◽  
High Order ◽  
Control Methods ◽  
Control Performance ◽  
Secondary Sources ◽  
Active Noise ◽  
New Finding

This paper presents an analysis of the effectiveness of active noise control methods for control of high order modes in rigid-walled, semi-infinite waveguides. The waveguides examined in this investigation are terminated at one end with a rigid end. The case studies performed reconfirmed that n control actuators can control n propagating modes (including the plane wave) in a waveguide if the actuators are properly placed. The results also confirmed that the control actuators should be located at the node surfaces of the most significant evanescent modes to avoid various problems that evanescent modes cause active control systems. A significant new finding is the effect of the rigid waveguide termination on the active controller. The reflected energy from the termination causes standing waves in the region between the rigid termination and the secondary sources. At certain frequencies which correspond to resonant conditions, the standing wave amplitudes become large and the control actuator strength must be high. At these frequencies the effects of the evanescent modes become significant even when the mode is not close to its cut-on frequency. Similar resonant effects can be expected to affect active noise control performance for any case where there are significant reflections in the waveguide upstream of the control actuators.

Can Values of Honesty, Hard Work, Loyalty and Discipline Predict Entrepreneurial Orientation of Muslim Owner Managers?

2015 ◽  
Vol 3 (1) ◽  
pp. 31 ◽  
Author(s):  
Rohani Mohd ◽  
Badrul Hisham Kamaruddin ◽  
Khulida Kirana Yahya ◽  
Elias Sanidas
Keyword(s):  
Entrepreneurial Orientation ◽  
Two Dimensions ◽  
Hard Work ◽  
Small Scale ◽  
Sampling Frame ◽  
Policy Makers ◽  
Learning Institutions ◽  
Innovative Orientation ◽  
The Impact ◽  
True Values

The purpose of the present study is twofold: first, to investigate the true values of Muslim owner managers; second, to examine the impact of these values on entrepreneurial orientations of Muslim small-scale entrepreneurs. 850 Muslim owner managers were selected randomly using the sampling frame provided by MajlisAmanah Rakyat Malaysia (MARA). 162 completed questionnaires were collected and analyzed. For this paper only two dimensions of entrepreneurial orientations were analyzed: proactive orientation and innovative orientation. Interestingly, the findings revealed that Muslim businessmen/women are honest, loyal, disciplined and hard working. Loyalty and honesty are positively related to proactive orientation, while discipline and hard-work are positively related to innovative orientation. The findings provide implications for existing relevant theories, policy makers, practitioners and learning institutions. 

Active control of compressor noise in the machinery room of refrigerators

2019 ◽  
Vol 67 (5) ◽  
pp. 350-362
Author(s):  
J. M. Ku ◽  
W. B. Jeong ◽  
C. Hong
Keyword(s):  
Control System ◽  
Active Control ◽  
Weighting Function ◽  
Reference Signal ◽  
Active Noise Control ◽  
Dominant Frequency ◽  
Time Signal ◽  
Frequency Noise ◽  
Sound Power ◽  
Fxlms Algorithm

The low-frequency noise generated by the vibration of the compressor in the machinery room of refrigerators is considered as annoying sound. Active noise control is used to reduce this noise without any change in the design of the compressor in the machinery room. In configuring the control system, various signals are measured and analyzed to select the reference signal that best represents the compressor noise. As the space inside the machinery room is small, the size of a speaker is limited, and the magnitude of the controller transfer function is designed to be small at low frequencies, the controller uses FIR filter structure converged by the FxLMS algorithm using the pre-measured time signal. To manage the convergence speed for each frequency, the frequency-weighting function is applied to FxLMS algorithm. A series of measurements are performed to design the controller and to evaluate the control performance. After the control, the sound power transmitted by the refrigerator is reduced by 9 dB at the first dominant frequency (408 Hz in this case) and 3 dB at the second dominant frequency (459 Hz here), and the overall sound power decreases by 2.6 dB. Through this study, an active control system for the noise generated by refrigerator compressors is established.

scholarly journals Land Subsidence Estimation for Aquifer Drainage Induced by Underground Mining

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4658
Author(s):  
Artur Guzy ◽  
Wojciech T. Witkowski
Keyword(s):  
Environmental Impact ◽  
Land Subsidence ◽  
Field Data ◽  
Underground Mining ◽  
Small Scale ◽  
Aquifer System ◽  
Maximum Value ◽  
The Impact ◽  
Method Model ◽  
Impact Of Mining

Land subsidence caused by groundwater withdrawal induced by mining is a relatively unknown phenomenon. This is primarily due to the small scale of such movements compared to the land subsidence caused by deposit extraction. Nonetheless, the environmental impact of drainage-related land subsidence remains underestimated. The research was carried out in the “Bogdanka” coal mine in Poland. First, the historical impact of mining on land subsidence and groundwater head changes was investigated. The outcomes of these studies were used to construct the influence method model. With field data, our model was successfully calibrated and validated. Finally, it was used for land subsidence estimation for 2030. As per the findings, the field of mining exploitation has the greatest land subsidence. In 2014, the maximum value of the phenomenon was 0.313 cm. However, this value will reach 0.364 m by 2030. The spatial extent of land subsidence caused by mining-induced drainage extends up to 20 km beyond the mining area’s boundaries. The presented model provided land subsidence patterns without the need for a complex numerical subsidence model. As a result, the method presented can be effectively used for land subsidence regulation plans considering the impact of mining on the aquifer system.

scholarly journals Networking for Cloud Robotics: The DewROS Platform and Its Application

2021 ◽  
Vol 10 (2) ◽  
pp. 34
Author(s):  
Alessio Botta ◽  
Jonathan Cacace ◽  
Riccardo De Vivo ◽  
Bruno Siciliano ◽  
Giorgio Ventre
Keyword(s):  
Response Time ◽  
Large Data ◽  
Cloud Services ◽  
Cloud Provider ◽  
Human Beings ◽  
Minimal Impact ◽  
Network Connection ◽  
Cloud Robotics ◽  
Networking Technologies ◽  
The Impact

With the advances in networking technologies, robots can use the almost unlimited resources of large data centers, overcoming the severe limitations imposed by onboard resources: this is the vision of Cloud Robotics. In this context, we present DewROS, a framework based on the Robot Operating System (ROS) which embodies the three-layer, Dew-Robotics architecture, where computation and storage can be distributed among the robot, the network devices close to it, and the Cloud. After presenting the design and implementation of DewROS, we show its application in a real use-case called SHERPA, which foresees a mixed ground and aerial robotic platform for search and rescue in an alpine environment. We used DewROS to analyze the video acquired by the drones in the Cloud and quickly spot signs of human beings in danger. We perform a wide experimental evaluation using different network technologies and Cloud services from Google and Amazon. We evaluated the impact of several variables on the performance of the system. Our results show that, for example, the video length has a minimal impact on the response time with respect to the video size. In addition, we show that the response time depends on the Round Trip Time (RTT) of the network connection when the video is already loaded into the Cloud provider side. Finally, we present a model of the annotation time that considers the RTT of the connection used to reach the Cloud, discussing results and insights into how to improve current Cloud Robotics applications.

scholarly journals Foreign investment in emerging legal medicinal cannabis markets: the Jamaica case study

2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Marta Rychert ◽  
Machel Anthony Emanuel ◽  
Chris Wilkins
Keyword(s):  
Civil Society ◽  
Foreign Investment ◽  
Production Efficiency ◽  
Production Quality ◽  
Small Scale ◽  
Organic Cultivation ◽  
Enhanced Production ◽  
Political Interference ◽  
Medicinal Cannabis ◽  
The Impact

Abstract Introduction The establishment of a legal market for medicinal cannabis under the Dangerous Drugs Amendment Act 2015 has positioned Jamaica at the forefront of cannabis law reform in the developing world. Many local cannabis businesses have attracted investment from overseas, including from Canada, US and Europe. Aim To explore the opportunities and risks of foreign investment in an emerging domestic legal cannabis market in a developing country. Methods Thematic analysis of semi-structured face-to-face interviews with 22 key informants (KIs) from the Jamaican government, local cannabis industry, academia and civil society, and field observations of legal and illegal cannabis cultivators. Results KIs from the Jamaican public agencies and domestic cannabis entrepreneurs saw foreign investment as an essential source of capital to finance the start-up costs of legal cannabis businesses. Local cannabis entrepreneurs prioritised investors with the greatest financial resources, brand reputation and export networks. They also considered how allied an investor was with their business vision (e.g., organic cultivation, medical vs. recreational). The key benefits of partnering with a foreign investor included transfer of technical knowledge and financial capital, which enhanced production, quality assurance and seed-to-sale tracking. Some KIs expressed concern over investors’ focus on increasing production efficiency and scale at the expense of funding research and development (R&D) and clinical trials. KIs from the local industry, government agencies and civil society highlighted the risks of ‘predatory’ shareholder agreements and domestic political interference. Concerns were raised about the impact of foreign investment on the diversity of the domestic cannabis sector in Jamaica, including the commitment to transition traditional illegal small-scale cannabis cultivators to the legal sector. Conclusion While foreign investment has facilitated the commercialisation of the cannabis sector in Jamaica, regulatory measures are also needed to protect the domestic industry and support the transition of small-scale illegal cultivators to the legal regime. Foreign investments may alter the economic, social and political determinants of health in transitioning from illegal to legal cannabis market economy.

scholarly journals A Model-Based Tool for Assessing the Impact of Land Use Change Scenarios on Flood Risk in Small-Scale River Systems—Part 1: Pre-Processing of Scenario Based Flood Characteristics for the Current State of Land Use

Hydrology ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 102
Author(s):  
Frauke Kachholz ◽  
Jens Tränckner
Keyword(s):  
Land Use ◽  
River Flow ◽  
Land Use Changes ◽  
Small Rivers ◽  
Small Scale ◽  
Model Parameters ◽  
Ungauged Catchments ◽  
Model Based ◽  
Current State ◽  
The Impact

Land use changes influence the water balance and often increase surface runoff. The resulting impacts on river flow, water level, and flood should be identified beforehand in the phase of spatial planning. In two consecutive papers, we develop a model-based decision support system for quantifying the hydrological and stream hydraulic impacts of land use changes. Part 1 presents the semi-automatic set-up of physically based hydrological and hydraulic models on the basis of geodata analysis for the current state. Appropriate hydrological model parameters for ungauged catchments are derived by a transfer from a calibrated model. In the regarded lowland river basins, parameters of surface and groundwater inflow turned out to be particularly important. While the calibration delivers very good to good model results for flow (Evol =2.4%, R = 0.84, NSE = 0.84), the model performance is good to satisfactory (Evol = −9.6%, R = 0.88, NSE = 0.59) in a different river system parametrized with the transfer procedure. After transferring the concept to a larger area with various small rivers, the current state is analyzed by running simulations based on statistical rainfall scenarios. Results include watercourse section-specific capacities and excess volumes in case of flooding. The developed approach can relatively quickly generate physically reliable and spatially high-resolution results. Part 2 builds on the data generated in part 1 and presents the subsequent approach to assess hydrologic/hydrodynamic impacts of potential land use changes.

scholarly journals Whole-genome sequencing from the New Zealand Saccharomyces cerevisiae population reveals the genomic impacts of novel microbial range expansion

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Peter Higgins ◽  
Cooper A Grace ◽  
Soon A Lee ◽  
Matthew R Goddard
Keyword(s):  
Saccharomyces Cerevisiae ◽  
New Zealand ◽  
Whole Genome Sequencing ◽  
Genome Sequencing ◽  
Range Expansion ◽  
Copy Number ◽  
Small Scale ◽  
Whole Genome ◽  
Copy Number Changes ◽  
The Impact

Abstract Saccharomyces cerevisiae is extensively utilized for commercial fermentation, and is also an important biological model; however, its ecology has only recently begun to be understood. Through the use of whole-genome sequencing, the species has been characterized into a number of distinct subpopulations, defined by geographical ranges and industrial uses. Here, the whole-genome sequences of 104 New Zealand (NZ) S. cerevisiae strains, including 52 novel genomes, are analyzed alongside 450 published sequences derived from various global locations. The impact of S. cerevisiae novel range expansion into NZ was investigated and these analyses reveal the positioning of NZ strains as a subgroup to the predominantly European/wine clade. A number of genomic differences with the European group correlate with range expansion into NZ, including 18 highly enriched single-nucleotide polymorphism (SNPs) and novel Ty1/2 insertions. While it is not possible to categorically determine if any genetic differences are due to stochastic process or the operations of natural selection, we suggest that the observation of NZ-specific copy number increases of four sugar transporter genes in the HXT family may reasonably represent an adaptation in the NZ S. cerevisiae subpopulation, and this correlates with the observations of copy number changes during adaptation in small-scale experimental evolution studies.

scholarly journals Effect of the Assimilation Frequency of Radar Reflectivity on Rain Storm Prediction by Using WRF-3DVAR

2021 ◽  
Vol 13 (11) ◽  
pp. 2103
Author(s):  
Yuchen Liu ◽  
Jia Liu ◽  
Chuanzhe Li ◽  
Fuliang Yu ◽  
Wei Wang
Keyword(s):  
Data Assimilation ◽  
Northern China ◽  
Horizontal Resolution ◽  
Radar Reflectivity ◽  
Small Scale ◽  
Time Interval ◽  
Outer Domain ◽  
Storm Prediction ◽  
The Impact ◽  
Assimilation Time

An attempt was made to evaluate the impact of assimilating Doppler Weather Radar (DWR) reflectivity together with Global Telecommunication System (GTS) data in the three-dimensional variational data assimilation (3DVAR) system of the Weather Research Forecast (WRF) model on rain storm prediction in Daqinghe basin of northern China. The aim of this study was to explore the potential effects of data assimilation frequency and to evaluate the outputs from different domain resolutions in improving the meso-scale NWP rainfall products. In this study, four numerical experiments (no assimilation, 1 and 6 h assimilation time interval with DWR and GTS at 1 km horizontal resolution, 6 h assimilation time interval with radar reflectivity, and GTS data at 3 km horizontal resolution) are carried out to evaluate the impact of data assimilation on prediction of convective rain storms. The results show that the assimilation of radar reflectivity and GTS data collectively enhanced the performance of the WRF-3DVAR system over the Beijing-Tianjin-Hebei region of northern China. It is indicated by the experimental results that the rapid update assimilation has a positive impact on the prediction of the location, tendency, and development of rain storms associated with the study area. In order to explore the influence of data assimilation in the outer domain on the output of the inner domain, the rainfall outputs of 3 and 1 km resolution are compared. The results show that the data assimilation in the outer domain has a positive effect on the output of the inner domain. Since the 3DVAR system is able to analyze certain small-scale and convective-scale features through the incorporation of radar observations, hourly assimilation time interval does not always significantly improve precipitation forecasts because of the inaccurate radar reflectivity observations. Therefore, before data assimilation, the validity of assimilation data should be judged as far as possible in advance, which can not only improve the prediction accuracy, but also improve the assimilation efficiency.

Sign in / Sign up

Export Citation Format

Share Document