Co-electrospun-electrosprayed PVA/folic acid nanofibers for transdermal drug delivery: Preparation, characterization, and in vitro cytocompatibility

2021 ◽  
pp. 152808372199718
Author(s):  
Fatma Nur Parın ◽  
Çiğdem İnci Aydemir ◽  
Gökçe Taner ◽  
Kenan Yıldırım
Keyword(s):  
Folic Acid ◽  
Polymer Matrix ◽  
Vinyl Alcohol ◽  
Matrix Material ◽  
In Vitro Study ◽  
Poly Vinyl Alcohol ◽  
Electrospun Fibers ◽  
Pva Gel ◽  
Fast Release

In this study, hydrophilic based bioactive nanofibers were produced via an electrospinning and electrospraying simultaneous process. Poly(vinyl alcohol) (PVA), poly(vinyl alcohol)-gelatin (PVA-Gel), and poly(vinyl alcohol)-alginate (PVA-Alg) polymers were used as the matrix material and folic acid (FA) particles were dispersed simultaneously on the surface of the nanofibers. The morphology of the nanofibers (NFs) was uniform and confirmed by scanning electron microscopy. Thermal behavior, chemical structure of the composite nanofibers were investigated by thermogravimetric analysis, and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy which showed that no chemical bonding between vitamin and polymers. A fast release of FA-loaded electrospun fibers was carried out by UV-Vis in vitro study within the 8 hour-period in artificial sweat solutions (pH 5.44). The obtained PVA/FA, PVA-Gel/FA, and PVA-Alg/FA fibers released 49.6%, 69.55%, and 50.88% of the sprayed FA in 8 h, indicating the influence of polymer matrix and polymer-drug interactions, on its release from the polymer matrix. Moreover, biocompatibility of all developed novel NFs was assessed by two different cytotoxicity tests, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and neutral red uptake (NRU) assay in L929 (mouse fibroblasts) cell lines. In all cases, it is concluded that these new electrospun fibers had fast-release of the vitamin and the hybrid process is suitable for transdermal patch applications, especially for skin-care products. The results of cytocompatibility assays on L929 reveal that all prepared NFs have no or slight cell toxicity. PVA and PVA-Gel with/without FA nanofibers seems more biocompatible than PVA-Alg nanofibers.

scholarly journals Folic acid-containing nanofibers by simultaneous process for transdermal drug delivery:  preparation, characterization, and in vitro biocompatibility

2020 ◽  
Author(s):  
Fatma Nur Parın ◽  
Çiğdem İnci Aydemir ◽  
Gökçe Taner ◽  
Kenan Yıldırım
Keyword(s):  
Folic Acid ◽  
Polyvinyl Alcohol ◽  
Polymer Matrix ◽  
Matrix Material ◽  
L929 Cell ◽  
Skin Care ◽  
Electrospun Fibers ◽  
Simultaneous Process ◽  
Pva Gel

Abstract Nanofibers with bioactive agents are good candidates for skin-care applications due to high spesific surface area, low density and highly porous structure. In this study, hydrophilic based bioactive nanofibers were produced via an electrospinning and electrospraying simultaneous process. Polyvinyl alcohol (PVA), polyvinyl alcohol-gelatin (PVA-Gel) and polyvinyl alcohol-alginate (PVA-Alg) polymers were used as the matrix material and folic acid (FA) particles were dispersed simultaneously on the surface of these hydrophilic nanofibers. The morphology of the nanofibers (NFs) was uniform and dispersed folic acid particles incorporated into the structure of nanofibers as confirmed by scanning electron microscopy (SEM). Thermal behavior, chemical structure of the composite nanofibers were analyzed/investigated by thermogravimetric analysis (TGA) and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) which showed that no chemical bonding between vitamin and polymers. A controlled release of FA-loaded electrospun fibers were carried out by UV-Vis in vitro study within the 8 hour-period in artificial sweat solutions (acidic media, pH 5,44). The obtained PVA/FA, PVA-Gel/FA and PVA-Alg/FA fibers released 49.6 %, 69.55 % and 50.88 % of the sprayed FA in 8 h, indicating the influence of polymer matrix and polymer-drug interactions, on its release from the polymer matrix. Moreover, biocompatibility of all developed novel NFs was assessed by two different cytotoxicity tests,3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and neutral red uptake (NRU) assay in L929 cell lines. In all cases, it is clearly concluded that these new electrospun fibers had fast-release of the vitamin and the hybrid process is suitable for transdermal patch applications, especially for skin-care products. Moreover, it has been proposed nanofiber with folic acid as a patch may prevent the COVID-19. The results of cytotoxicity assays on L929 cell reveal that all prepared NFs have no or slight cell toxicity. PVA and PVA-Gel with/without FA nanofibers seems more biocompatible than PVA-Alg nanofibers.

Graphene-reinforced poly(vinyl alcohol) electrospun fibers as building blocks for high performance nanocomposites

RSC Advances ◽  
2015 ◽  
Vol 5 (103) ◽  
pp. 85009-85018 ◽  
Author(s):  
Sajjad Ghobadi ◽  
Sina Sadighikia ◽  
Melih Papila ◽  
Fevzi Çakmak Cebeci ◽  
Selmiye Alkan Gürsel
Keyword(s):  
Polymer Matrix ◽  
Vinyl Alcohol ◽  
High Performance ◽  
Building Blocks ◽  
Poly Vinyl Alcohol ◽  
Electrospun Fibers ◽  
Matrix Solution ◽  
High Level

Graphene-containing fibrous structures with a high level of affinity towards a polymer matrix solution have been proved to be promising for high performance macroscopic nanocomposite reinforcement purposes.

Preparation of Poly(vinyl alcohol)/Chitosan-Blended Hydrogels: Properties, In Vitro Studies and Kinetic Evaluation

2012 ◽  
Vol 15 ◽  
pp. 63-72 ◽  
Author(s):  
Motahare Sadat Hosseini ◽  
Issa Amjadi ◽  
Nooshin Haghighipour
Keyword(s):  
Tissue Engineering ◽  
Vinyl Alcohol ◽  
Crosslinking Agent ◽  
Cartilage Defects ◽  
Poly Vinyl Alcohol ◽  
Tissue Engineering Scaffolds ◽  
Kinetic Evaluation ◽  
Freeze Thaw ◽  
Pva Gel

Articular Cartilage Defects Are a Recent Critical Orthopaedic Issue. Hydrogels Have Been Widely Used in Soft Tissue Engineering Scaffolds as their Structures Are Similar to the Macromolecular-Based Components in the Human Body. Hydrogels Including those Based on Poly(vinyl Alcohol) (PVA) and Chitosan Are of Considerable Interest for Utilization in the Field of Tissue Engineering because of their Appropriate Biocompatibility. PVA Gels Can Be Formed by Chemical or Physical Crosslinking. the “freezing-Thawing” (FT) Process Is the Most Mild, Facile and Effective Method to Produce Physically Crosslinked PVA Gel, because it Does Not Require the Presence of the Crosslinking Agent that May Cause Toxicity. in this Study Hydrogels Based on PVA and Chitosan in Different Blend Ratios Were Prepared, and the Effect of the Freeze-Thaw Cycles and Glutaraldehyde on the Hydrogel Properties Was Investigated. the Results Showed that Freeze-Thaw Cycles Increased the Tensile Strength and the Samples’ Resistance to Degradation. the Biocompatibility of the Hydrogels Was Analysed Using Chondrocyte Cells Separated from Distal Femur of Men. Cell Toxicity Assay Performed for Measurement of Cell Viability of the Samples Indicated Biocompatibility.

scholarly journals Preparation and Characterisation of Vitamin-Loaded Electrospun Nanofibres as Promising Transdermal Patches

2021 ◽  
Vol 29 (1(145)) ◽  
pp. 17-25
Author(s):  
Fatma Nur Parın ◽  
Kenan Yıldırım
Keyword(s):  
Folic Acid ◽  
In Vitro Release ◽  
In Vitro Study ◽  
Electrospun Fibers ◽  
Burst Release ◽  
Gravimetric Analysis ◽  
Sem Images ◽  
Transdermal Patches ◽  
Electrospinning Method

In this study, bioactive fibers were produced using polyvinyl alcohol (PVA), gelatin, polyvinyl pyrolidone (PVP) as a polymer matrix and different amounts of folic acid (FA) as an vitamin by using electrospinning method. Loading of the folic acid in the polymers was determined by the Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), morphologies and average diameters were analyzed by Scanning Electron Microscopy (SEM) and Thermal Gravimetric Analysis (TGA) was applied for determining thermal behaviors.The FTIR spectra TGA showed the successful incorporation of folic acid to the fibers. SEM images showed that various smooth and heterogenous electrospun fibers were produced with average diameters ranging from 125 nm to 980 nm. In vitro study was carried out by using FA dissolved in artificial sweat solution (acidic media, pH 5.44) and UV-Vis analysis of electrospun fibers were evaluated. In vitro release studies showed the FA loaded nanofibers had initial vitamin burst release behavior. The maximum vitamin release percentage of PVA/FA, gelatin/FA and PVP/FA fibers was obtained 86.88 %, 80.2 % and 76.66 %, respectively. From these results, the FA-loaded fibers are potential candidates for transdermal patches and topical applications.

scholarly journals Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery

2021 ◽  
Vol 8 (8) ◽  
pp. 107
Author(s):  
Lilis Iskandar ◽  
Lucy DiSilvio ◽  
Jonathan Acheson ◽  
Sanjukta Deb
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Vinyl Alcohol ◽  
Maxillofacial Surgery ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Poly Vinyl Alcohol ◽  
Oral And Maxillofacial Surgery

Despite considerable advances in biomaterials-based bone tissue engineering technologies, autografts remain the gold standard for rehabilitating critical-sized bone defects in the oral and maxillofacial (OMF) region. A majority of advanced synthetic bone substitutes (SBS’s) have not transcended the pre-clinical stage due to inferior clinical performance and translational barriers, which include low scalability, high cost, regulatory restrictions, limited advanced facilities and human resources. The aim of this study is to develop clinically viable alternatives to address the challenges of bone tissue regeneration in the OMF region by developing ‘dual network composites’ (DNC’s) of calcium metaphosphate (CMP)—poly(vinyl alcohol) (PVA)/alginate with osteogenic ions: calcium, zinc and strontium. To fabricate DNC’s, single network composites of PVA/CMP with 10% (w/v) gelatine particles as porogen were developed using two freeze–thawing cycles and subsequently interpenetrated by guluronate-dominant sodium alginate and chelated with calcium, zinc or strontium ions. Physicochemical, compressive, water uptake, thermal, morphological and in vitro biological properties of DNC’s were characterised. The results demonstrated elastic 3D porous scaffolds resembling a ‘spongy bone’ with fluid absorbing capacity, easily sculptable to fit anatomically complex bone defects, biocompatible and osteoconductive in vitro, thus yielding potentially clinically viable for SBS alternatives in OMF surgery.

scholarly journals Linear Dynamic Viscoelasticity of Dual Cross-Link Poly(Vinyl Alcohol) Hydrogel with Determined Borate Ion Concentration

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 71
Author(s):  
Takuro Taniguchi ◽  
Kenji Urayama
Keyword(s):  
Vinyl Alcohol ◽  
Ion Concentration ◽  
Poly Vinyl Alcohol ◽  
Relaxation Dynamics ◽  
Cross Link ◽  
Dynamic Viscoelasticity ◽  
Linear Dynamic ◽  
Cross Links ◽  
Pva Gel ◽  
Pva Hydrogel

We investigated the linear dynamic viscoelasticity of dual cross-link (DC) poly(vinyl alcohol) (PVA) (DC-PVA) hydrogels with permanent and transient cross-links. The concentrations of incorporated borate ions to form transient cross-links in the DC-PVA hydrogels (CBIN) were determined by the azomethine-H method. The dynamic viscoelasticity of the DC-PVA hydrogel cannot be described by a simple sum of the dynamic viscoelasticity of the PVA gel with the same permanent cross-link concentration and the PVA aqueous solution with the same borate ion concentration (CB = CBIN) as in the DC-PVA gel. The DC-PVA hydrogel exhibited a considerably higher relaxation strength, indicating that the introduction of permanent cross-links into temporary networks increases the number of viscoelastic chains with finite relaxation times. In contrast, the relaxation frequency (ωc) (given by the frequency at the maximum of loss modulus) for the DC-PVA hydrogel was slightly lower but comparable to that for a dilute PVA solution with the same CB. This signifies that the relaxation dynamics of the DC-PVA hydrogels is essentially governed by the lifetime of an interchain transient cross-link (di-diol complex of boron). The effect of permanent cross-linking on the relaxation dynamics was observed in the finite broadening of the relaxation-time distribution in the long time region.

scholarly journals Multifunctional Coatings for Robotic Implanted Device

2019 ◽  
Vol 20 (20) ◽  
pp. 5126 ◽  
Author(s):  
Caterina Cristallini ◽  
Serena Danti ◽  
Bahareh Azimi ◽  
Veronika Tempesti ◽  
Claudio Ricci ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Vinyl Alcohol ◽  
Soft Tissues ◽  
Functional Characterization ◽  
Titanium Substrate ◽  
Repair Process ◽  
Chemical Imaging ◽  
In Vitro Cytotoxicity ◽  
Poly Vinyl Alcohol

The objective of this study was the preparation and physico-chemical, mechanical, biological, and functional characterization of a multifunctional coating for an innovative, fully implantable device. The multifunctional coating was designed to have three fundamental properties: adhesion to device, close mechanical resemblance to human soft tissues, and control of the inflammatory response and tissue repair process. This aim was fulfilled by preparing a multilayered coating based on three components: a hydrophilic primer to allow device adhesion, a poly(vinyl alcohol) hydrogel layer to provide good mechanical compliance with the human tissue, and a layer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fibers. The use of biopolymer fibers offered the potential for a long-term interface able to modulate the release of an anti-inflammatory drug (dexamethasone), thus contrasting acute and chronic inflammation response following device implantation. Two copolymers, poly(vinyl acetate-acrylic acid) and poly(vinyl alcohol-acrylic acid), were synthetized and characterized using thermal analysis (DSC, TGA), Fourier transform infrared spectroscopy (FT-IR chemical imaging), in vitro cell viability, and an adhesion test. The resulting hydrogels were biocompatible, biostable, mechanically compatible with soft tissues, and able to incorporate and release the drug. Finally, the multifunctional coating showed a good adhesion to titanium substrate, no in vitro cytotoxicity, and a prolonged and controlled drug release.

Tailoring the in vitro characteristics of poly(vinyl alcohol)-nanohydroxyapatite composite scaffolds for bone tissue engineering

2016 ◽  
Vol 36 (8) ◽  
pp. 771-784 ◽  
Author(s):  
Tejinder Kaur ◽  
Arunachalam Thirugnanam ◽  
Krishna Pramanik
Keyword(s):  
Mechanical Strength ◽  
Vinyl Alcohol ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Poly Vinyl Alcohol ◽  
Apatite Formation ◽  
Composite Scaffolds ◽  
Alizarin Red ◽  
Casting Technique

Abstract Poly(vinyl alcohol) reinforced with nanohydroxyapatite (PVA-nHA) composite scaffolds were developed by varying the nHA (1%, 2%, 3%, 4%, and 5%, w/v) composition in the PVA matrix by solvent casting technique. The developed composite scaffolds were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and contact angle measurement. The stability of the composite scaffolds in physiological environment was evaluated by swelling and degradation studies. Further, these composite scaffolds were tested for in vitro bioactivity, hemolysis, biocompatibility, and mechanical strength. SEM micrographs showed a homogenous distribution of nHA (3%, w/v) in the PVA matrix. XRD and ATR-FTIR analysis confirmed no phase contamination and the existence of the chemical bond between PVA-nHA at approximately 2474 cm-1. PVA-nHA composite scaffolds with 3% (w/v) concentration of nHA showed nominal swelling and degradation behavior with good mechanical strength. The mechanical strength and degradation properties of the scaffold above 3% (w/v) of nHA was found to deteriorate, which is due to the agglomeration of nHA. The in vitro bioactivity and hemolysis studies showed improved apatite formation and hemocompatibility of the developed scaffolds. In vitro cell adhesion, proliferation, alkaline phosphatase activity, and Alizarin red S staining confirmed the biocompatibility of the composite scaffolds.

scholarly journals Folic acid modified electrospun poly(vinyl alcohol)/polyethyleneimine nanofibers for cancer cell capture applications

2016 ◽  
Vol 34 (6) ◽  
pp. 755-765 ◽  
Author(s):  
Zhang-yu Fan ◽  
Yi-li Zhao ◽  
Xiao-yue Zhu ◽  
Yu Luo ◽  
Ming-wu Shen ◽  
...  
Keyword(s):  
Folic Acid ◽  
Cancer Cell ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
Cell Capture
Sign in / Sign up

Export Citation Format

Share Document