HA-based dermal filler: downstream process comparison, impurity quantitation by validated HPLC-MS analysis, and in vivo residence time study

The success of hyaluronic acid (HA)-based dermal fillers, with more than 2 million minimally invasive procedures conducted in 2016 in the US alone, is due to their hygroscopic properties of biocompatibility and reversibility. The type and density of HA cross-linkage, as well as the manufacturing technology, may influence not only the in vivo persistence but also the safety profile of dermal fillers. 1,4-Butanediol diglycidyl ether (BDDE) is the cross-linker used in most market-leading HA fillers; 1,4-butanediol di-(propan-2,3-diolyl) ether (BDPE) is the major impurity obtained from the HA–BDDE cross-linking (HBC) process. In this work, a new process to obtain high purity HBC fillers was developed. A new HPLC-MS method was validated for the quantification of BDPE content in HBC dermal fillers. In vitro cytotoxicity of BDPE was evaluated in fibroblasts (IC50 = 0.48 mg/mL). The viscoelasticity was monitored during the shelf-life of the HBC-10% hydrogel and was correlated with in vitro hyaluronidase resistance and in vivo residence time in a rabbit model. This analysis showed that elasticity is the best parameter to predict the in vivo residence time. Finally, a series of parameters were investigated in certain marketed dermal fillers and were compared with the results of the HBC-10% hydrogel.

Download Full-text

Biomimetic Ceramic Composite: Characterization, Cell Response, and In Vivo Biocompatibility

Materials ◽

10.3390/ma14237374 ◽

2021 ◽

Vol 14 (23) ◽

pp. 7374

Author(s):

Hung-Yang Lin ◽

Yi-Jung Lu ◽

Hsin-Hua Chou ◽

Keng-Liang Ou ◽

Bai-Hung Huang ◽

...

Keyword(s):

Heat Treatment ◽

Cell Response ◽

Treatment Time ◽

Rabbit Model ◽

In Vitro Cytotoxicity ◽

Tissue Reaction ◽

Mouse Fibroblast ◽

Autogenous Bone

The present study aimed to synthesize biphasic calcium phosphate ceramics (CaPs) composed of β-tricalcium phosphate (β-TCP) and hydroxyapatite (HAp) from the propagated Scleractinian coral and dicalcium phosphate anhydrous using a solid-state reaction followed by heat treatment at a temperature of 1100 °C for 1 h to 7 days. The as-prepared coral and coral-derived biphasic CaPs samples were characterized through scanning electron microscopy, X-ray diffractometry, Fourier transform infrared spectroscopy, and Raman spectroscopy. The cell response of the biphasic CaPs was evaluated by in vitro cytotoxicity assessment using mouse fibroblast (L929) cells. The bilateral femoral defect rabbit model was used to assess the early local reaction of the coral-derived biphasic CaPs bone graft on tissue. The results confirmed that the co-existence of β-TCP and HAp was formed at 1100 °C for 1 h. The ratio of HA/β-TCP increased as the heat-treatment time increased. The coral-derived biphasic CaPs comprising 61% HAp and 39% β-TCP (defined as HT-3) were not cytotoxic. Furthermore, no significant differences in local tissue reaction were observed between the HT-3 sample and autogenous bone. Therefore, the synthesized coral-derived biphasic CaPs is a candidate for bone grafting due to its good biocompatibility.

Download Full-text

Mixed Micelles as Nano Polymer Therapeutics of Docetaxel: Increased In vitro Cytotoxicity and Decreased In vivo Toxicity

Current Drug Delivery ◽

10.2174/1567201814666170621113637 ◽

2018 ◽

Vol 15 (4) ◽

pp. 564-575 ◽

Cited By ~ 5

Author(s):

Arehalli S. Manjappa ◽

Popat S. Kumbhar ◽

Prajakta S. Khopade ◽

Ajit B. Patil ◽

John I. Disouza

Keyword(s):

Mixed Micelles ◽

In Vitro Cytotoxicity ◽

Polymer Therapeutics ◽

In Vivo Toxicity

Download Full-text

Mannose Conjugated Starch Nanoparticles for Preferential Targeting of Liver Cancer

Current Drug Delivery ◽

10.2174/1567201817666200903171124 ◽

2020 ◽

Vol 17 ◽

Author(s):

Akhlesh Kumar Jain ◽

Hitesh Sahu ◽

Keerti Mishra ◽

Suresh Thareja

Keyword(s):

Side Effects ◽

Liver Cancer ◽

Entrapment Efficiency ◽

Xrd Analysis ◽

In Vitro Cytotoxicity ◽

Physical Interaction ◽

Scanning Calorimetry ◽

Starch Nanoparticles

Aim: To design D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for site specific delivery. Background: Liver cancer is the third leading cause of death in world and fifth most often diagnosed cancer is the major global threat to public health. Treatment of liver cancer with conventional method bears several side effects, thus to undertake these side effects as a formulation challenge, it is necessary to develop novel target specific drug delivery system for the effective and better localization of drug into the proximity of target with restricting the movement of drug in normal tissues. Objective: To optimize and characterize the developed D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for effective treatment of liver cancer. Materials and methods: 5-FU loaded JFSSNPs were prepared and optimized formulation had higher encapsulation efficiency were conjugated with D-Mannose. These formulations were characterized for size, morphology, zeta potential, X-Ray Diffraction, and Differential Scanning Calorimetry. Potential of NPs were studied using in vitro cytotoxicity assay, in vivo kinetic studies and bio-distribution studies. Result and discussion: 5-Fluorouracil loaded NPs had particle size between 336 to 802nm with drug entrapment efficiency was between 64.2 to 82.3%. In XRD analysis, 5-FU peak was diminished in the diffractogram, which could be attributed to the successful incorporation of drug in amorphous form. DSC study suggests there was no physical interaction between 5- FU and Polymer. NPs showed sustained in vitro 5-FU release up to 2 hours. In vivo, mannose conjugated NPs prolonged the plasma level of 5-FU and assist selective accumulation of 5-FU in the liver (vs other organs spleen, kidney, lungs and heart) compared to unconjugated one and plain drug. Conclusion: In vivo, bio-distribution and plasma profile studies resulted in significantly higher concentration of 5- Fluorouracil liver suggesting that these carriers are efficient, viable, and targeted carrier of 5-FU treatment of liver cancer.

Download Full-text

Toward Physicochemical and Rheological Characterization of Different Injectable Hyaluronic Acid Dermal Fillers Cross-Linked with Polyethylene Glycol Diglycidyl Ether

Polymers ◽

10.3390/polym13060948 ◽

2021 ◽

Vol 13 (6) ◽

pp. 948

Author(s):

Nicola Zerbinati ◽

Sabrina Sommatis ◽

Cristina Maccario ◽

Maria Chiara Capillo ◽

Giulia Grimaldi ◽

...

Keyword(s):

Hyaluronic Acid ◽

Polyethylene Glycol ◽

Biological Activities ◽

Diglycidyl Ether ◽

Dermal Filler ◽

Cross Linking ◽

Matrix Structure ◽

Dermal Fillers ◽

Rheological Characterization

(1) Background: Injectable hyaluronic acid (HA) dermal fillers are used to restore volume, hydration and skin tone in aesthetic medicine. HA fillers differ from each other due to their cross-linking technologies, with the aim to increase mechanical and biological activities. One of the most recent and promising cross-linkers is polyethylene glycol diglycidyl ether (PEGDE), used by the company Matex Lab S.p.A., (Brindisi, Italy) to create the HA dermal filler PEGDE family. Over the last few years, several studies have been performed to investigate the biocompatibility and biodegradability of these formulations, but little information is available regarding their matrix structure, rheological and physicochemical properties related to their cross-linking technologies, the HA content or the degree of cross-linking. (2) Methods: Seven different injectable HA hydrogels were subjected to optical microscopic examination, cohesivity evaluation and rheological characterization in order to investigate their behavior. (3) Results: The analyzed cross-linked dermal fillers showed a fibrous “spiderweb-like” matrix structure, with each medical device presenting different and peculiar rheological features. Except for HA non cross-linked hydrogel 18 mg/mL, all showed an elastic and cohesive profile. (4) Conclusions: The comparative analysis with other literature works makes a preliminary characterization of these injectable medical devices possible.

Download Full-text

β-elemene alleviates airway stenosis via the ILK/Akt pathway modulated by MIR143HG sponging miR-1275

Cellular & Molecular Biology Letters ◽

10.1186/s11658-021-00261-0 ◽

2021 ◽

Vol 26 (1) ◽

Author(s):

Guoying Zhang ◽

Cheng Xue ◽

Yiming Zeng

Keyword(s):

Cell Cycle ◽

Cell Viability ◽

Cell Model ◽

Protective Efficacy ◽

Rabbit Model ◽

Akt Pathway ◽

Loss Of Function ◽

Airway Stenosis

Abstract Background We have previously found that β-elemene could inhibit the viability of airway granulation fibroblasts and prevent airway hyperplastic stenosis. This study aimed to elucidate the underlying mechanism and protective efficacy of β-elemene in vitro and in vivo. Methods Microarray and bioinformatic analysis were used to identify altered pathways related to cell viability in a β-elemene-treated primary cell model and to construct a β-elemene-altered ceRNA network modulating the target pathway. Loss of function and gain of function approaches were performed to examine the role of the ceRNA axis in β-elemene's regulation of the target pathway and cell viability. Additionally, in a β-elemene-treated rabbit model of airway stenosis, endoscopic and histological examinations were used to evaluate its therapeutic efficacy and further verify its mechanism of action. Results The hyperactive ILK/Akt pathway and dysregulated LncRNA-MIR143HG, which acted as a miR-1275 ceRNA to modulate ILK expression, were suppressed in β-elemene-treated airway granulation fibroblasts; β-elemene suppressed the ILK/Akt pathway via the MIR143HG/miR-1275/ILK axis. Additionally, the cell cycle and apoptotic phenotypes of granulation fibroblasts were altered, consistent with ILK/Akt pathway activity. In vivo application of β-elemene attenuated airway granulation hyperplasia and alleviated scar stricture, and histological detections suggested that β-elemene's effects on the MIR143HG/miR-1275/ILK axis and ILK/Akt pathway were in line with in vitro findings. Conclusions MIR143HG and ILK may act as ceRNA to sponge miR-1275. The MIR143HG/miR-1275/ILK axis mediates β-elemene-induced cell cycle arrest and apoptosis of airway granulation fibroblasts by modulating the ILK/Akt pathway, thereby inhibiting airway granulation proliferation and ultimately alleviating airway stenosis.

Download Full-text

Development of Triamcinolone Acetonide-Loaded Microemulsion as a Prospective Ophthalmic Delivery System for Treatment of Uveitis: In Vitro and In Vivo Evaluation

Pharmaceutics ◽

10.3390/pharmaceutics13040444 ◽

2021 ◽

Vol 13 (4) ◽

pp. 444

Author(s):

Alaa Mahran ◽

Sayed Ismail ◽

Ayat A. Allam

Keyword(s):

Triamcinolone Acetonide ◽

Delivery System ◽

Histopathological Examination ◽

Rabbit Model ◽

Subconjunctival Injection ◽

In Vivo Evaluation ◽

Ternary Phase Diagrams ◽

Ophthalmic Delivery

Treatment of uveitis (i.e., inflammation of the uvea) is challenging due to lack of convenient ophthalmic dosage forms. This work is aimed to determine the efficiency of triamcinolone acetonide (TA)-loaded microemulsion as an ophthalmic delivery system for the treatment of uveitis. Water titration method was used to construct different pseudo-ternary phase diagrams. Twelve microemulsion formulations were prepared using oleic acid, Cremophor EL, and propylene glycol. Among all tested formulations, Formulation F3, composed of oil: surfactant-co-surfactant (1:1): water (15:35:50% w/w, respectively), was found to be stable and showed acceptable pH, viscosity, conductivity, droplet size (211 ± 1.4 nm), and zeta potential (−25 ± 1.7 mV) and almost complete in vitro drug release within 24 h. The in vivo performance of the optimized formulation was evaluated in experimentally uveitis-induced rabbit model and compared with a commercial TA suspension (i.e., Kenacort®-A) either topically or by subconjunctival injection. Ocular inflammation was evaluated by clinical examination, white blood cell count, protein content measurement, and histopathological examination. The developed TA-loaded microemulsion showed superior therapeutic efficiency in the treatment of uveitis with high patient compliance compared to commercial suspension. Hence, it could be considered as a potential ocular treatment option in controlling of uveitis.

Download Full-text

A molecular architectural design that promises potent antimicrobial activity against multidrug-resistant pathogens

NPG Asia Materials ◽

10.1038/s41427-021-00287-y ◽

2021 ◽

Vol 13 (1) ◽

Author(s):

Bing Yuan ◽

Jiaojiao Liu ◽

Zhixiong Deng ◽

Lin Wei ◽

Wenwen Li ◽

...

Keyword(s):

Architectural Design ◽

Building Blocks ◽

Multidrug Resistant ◽

In Vitro Cytotoxicity ◽

Antimicrobial Drugs ◽

Minimal Inhibitory Concentrations ◽

Antimicrobial Efficiency ◽

Multidrug Resistant Pathogens

AbstractAddressing the devastating threat of drug-resistant pathogens requires the discovery of new antibiotics with advanced action mechanisms and/or novel strategies for drug design. Herein, from a biophysical perspective, we design a class of synthetic antibacterial complexes with specialized architectures based on melittin (Mel), a natural antimicrobial peptide, and poly(ethylene glycol) (PEG), a clinically available agent, as building blocks that show potent and architecture-modulated antibacterial activity. Among the complexes, the flexibly linear complex consisting of one Mel terminally connected with a long-chained PEG (e.g., PEG12k–1*Mel) shows the most pronounced improvement in performance compared with pristine Mel, with up to 500% improvement in antimicrobial efficiency, excellent in vitro activity against multidrug-resistant pathogens (over a range of minimal inhibitory concentrations of 2–32 µg mL−1), a 68% decrease in in vitro cytotoxicity, and a 57% decrease in in vivo acute toxicity. A lipid-specific mode of action in membrane recognition and an accelerated “channel” effect in perforating the bacterial membrane of the complex are described. Our results introduce a new way to design highly efficient and low-toxicity antimicrobial drugs based on architectural modulations with clinically available agents.

Download Full-text

Assessment of SnFe2O4 Nanoparticles for Potential Application in Theranostics: Synthesis, Characterization, In Vitro, and In Vivo Toxicity

Materials ◽

10.3390/ma14040825 ◽

2021 ◽

Vol 14 (4) ◽

pp. 825

Author(s):

Saman Sargazi ◽

Mohammad Reza Hajinezhad ◽

Abbas Rahdar ◽

Muhammad Nadeem Zafar ◽

Aneesa Awan ◽

...

Keyword(s):

Electron Microscopy ◽

A549 Cells ◽

In Vitro Cytotoxicity ◽

Hek293 Cells ◽

Hydrothermal Route ◽

X Ray ◽

Tin Chloride ◽

Bet Analysis

In this research, tin ferrite (SnFe2O4) NPs were synthesized via hydrothermal route using ferric chloride and tin chloride as precursors and were then characterized in terms of morphology and structure using Fourier-transform infrared spectroscopy (FTIR), Ultraviolet–visible spectroscopy (UV-Vis), X-ray power diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), and Brunauer–Emmett–Teller (BET) method. The obtained UV-Vis spectra was used to measure band gap energy of as-prepared SnFe2O4 NPs. XRD confirmed the spinel structure of NPs, while SEM and TEM analyses disclosed the size of NPs in the range of 15–50 nm and revealed the spherical shape of NPs. Moreover, energy dispersive X-ray spectroscopy (EDS) and BET analysis was carried out to estimate elemental composition and specific surface area, respectively. In vitro cytotoxicity of the synthesized NPs were studied on normal (HUVEC, HEK293) and cancerous (A549) human cell lines. HUVEC cells were resistant to SnFe2O4 NPs; while a significant decrease in the viability of HEK293 cells was observed when treated with higher concentrations of SnFe2O4 NPs. Furthermore, SnFe2O4 NPs induced dramatic cytotoxicity against A549 cells. For in vivo study, rats received SnFe2O4 NPs at dosages of 0, 0.1, 1, and 10 mg/kg. The 10 mg/kg dose increased serum blood urea nitrogen and creatinine compared to the controls (P < 0.05). The pathology showed necrosis in the liver, heart, and lungs, and the greatest damages were related to the kidneys. Overall, the in vivo and in vitro experiments showed that SnFe2O4 NPs at high doses had toxic effects on lung, liver and kidney cells without inducing toxicity to HUVECs. Further studies are warranted to fully elucidate the side effects of SnFe2O4 NPs for their application in theranostics.

Download Full-text

Peptide drugs for photopharmacology: how much of a safety advantage can be gained by photocontrol?

Future Drug Discovery ◽

10.4155/fdd-2019-0033 ◽

2020 ◽

Vol 2 (1) ◽

pp. FDD28 ◽

Cited By ~ 6

Author(s):

Oleg Babii ◽

Sergii Afonin ◽

Tim Schober ◽

Liudmyla V Garmanchuk ◽

Liudmyla I Ostapchenko ◽

...

Keyword(s):

Chemotherapeutic Agent ◽

In Vitro Cytotoxicity ◽

Pharmacokinetic Parameters ◽

Cancer Model ◽

Pharmacokinetic Properties ◽

Insight Into ◽

Safety Advantage ◽

Murine Cancer Model

Aim: To verify whether photocontrol of biological activity could augment safety of a chemotherapeutic agent. Materials & methods: LD50 values for gramicidin S and photoisomeric forms of its photoswitchable diarylethene-containing analogs were determined using mice. The results were compared with data obtained from cell viability measurements taken for the same compounds. Absorption, Distribution, Metabolism, and Elimination (ADME) tests using a murine cancer model were conducted to get insight into the underlying reasons for the observed in vivo toxicity. Results: While in vitro cytotoxicity values of the photoisomers differed substantially, the differences in the observed LD50 values were less pronounced due to unfavorable pharmacokinetic parameters. Conclusion: Despite unfavorable pharmacokinetic properties as in the representative case studied here, there is an overall advantage to be gained in the safety profile of a chemotherapeutic agent via photocontrol. Nevertheless, optimization of the pharmacokinetic parameters of photoisomers is an important issue to be addressed during the development of photopharmacological drugs.

Download Full-text

Melt-Cast Films Significantly Enhance Triamcinolone Acetonide Delivery to the Deeper Ocular Tissues

Pharmaceutics ◽

10.3390/pharmaceutics11040158 ◽

2019 ◽

Vol 11 (4) ◽

pp. 158

Author(s):

Akshaya Tatke ◽

Narendar Dudhipala ◽

Karthik Janga ◽

Bhavik Soneta ◽

Bharathi Avula ◽

...

Keyword(s):

Triamcinolone Acetonide ◽

Polymer Matrix ◽

Rabbit Model ◽

In Vivo Studies ◽

Invasive Technique ◽

Content Uniformity ◽

Scanning Calorimetry ◽

Ocular Tissues

Delivering an effective drug load to the posterior section of the ocular tissues, while using a non-invasive technique, has always been a challenge. In this regard, the goal of the present study was to develop sustained release triamcinolone acetonide (TA) loaded polymeric matrix films for ocular delivery. The TA-films were prepared in two different polymer matrices, with drug loadings of 10% and 20% w/w, and they were evaluated for ocular distribution in vivo in a conscious rabbit model. A 4% w/v TA suspension (TA-C) was used as a control for in vitro and in vivo studies. The TA-films, prepared with melt-cast technology, used polyethylene oxide (PEO) and Soluplus® as the polymer matrix. The films were evaluated with respect to assay, content uniformity, excipient interaction, and permeability across isolated rabbit sclera. The distribution of TA in the ocular tissues, post topical administration, was determined in New Zealand male albino rabbits as a function of dose, and was compared against TA-C. The assay of the 10% and 20% w/w film was in the range from 70–79% and 92–94% for the Soluplus® and PEO films, respectively, and content uniformity was in the range of 95–103% for both the films. The assay of the TA from Soluplus® films was less compared with the PEO films and showed an interaction with TA, as revealed by Differential Scanning Calorimetry (DSC). Hence, Soluplus® films were not selected for further studies. No interaction was observed between the drug and PEO polymer matrix. The enhancement of trans-scleral flux and permeability of TA was about 1.16 and 1.33-folds, respectively, from the 10% w/w PEO and 3.5 and 2.12-folds, respectively, from the 20% w/w PEO films, as compared with TA-C formulations. The in vivo studies demonstrate that significantly higher TA levels were observed in the anterior and posterior segments of the eye at the end of 6h with the PEO films. Therefore, the PEO based polymeric films were able to deliver TA into the back of the eye efficiently and for prolonged periods.

Download Full-text