scholarly journals The stability of the coiled-coil structure near to N-terminus influence the heat resistance of harpin proteins from Xanthomonas

2020 ◽  
Vol 20 (1) ◽  
Author(s):  
Yue Liu ◽  
Xiaoyun Zhou ◽  
Wenbo Liu ◽  
Weiguo Miao
Keyword(s):  
Thermal Stability ◽  
Heat Resistance ◽  
Coiled Coil ◽  
Temperature Treatment ◽  
High Temperature Treatment ◽  
Amino Acid Residues ◽  
Important Amino Acid ◽  
C Terminus ◽  
N Terminus ◽  
The Stability

Abstract Background Heat resistance is a common characteristic of harpins, a class of proteins found in Gram-negative bacteria, which may be related to the stability of coiled-coil (CC) structure. The CC structure is a ubiquitous protein folding and assembly motif made of α-helices wrapping around each other forming a supercoil. Specifically, whether the stability of the CC structure near to N-terminus of four selected harpin proteins from Xanthomonas (hereafter referred to as Hpa1) would influence their characteristics of heat resistance was investigated. We used bioinformatics approach to predict the structure of Hpa1, used the performance of hypersensitive response (HR)-induction activity of Hpa1 and circular dichroism (CD) spectral analyses to detect the relationship between the stability of the CC structure of Hpa1 and heat resistance. Results Each of four-selected Hpa1 has two α-helical regions with one in their N-terminus that could form CC structure, and the other in their C-terminus that could not. And the important amino acid residues involved in the CC motifs are located on helices present on the surface of these proteins, indicating they may engage in the formation of oligo mericaggregates, which may be responsible for HR elicitation by harpins and their high thermal stability. Increased or decreased the probability of forming a CC could either induce a stronger HR response or eliminate the ability to induce HR in tobacco after high temperature treatment. In addition, although the four Hpa1 mutants had little effect on the induction of HR by Hpa1, its thermal stability was significantly decreased. The α-helical content increased with increasing temperature, and the secondary structures of Hpa1 became almost entirely α-helices when the temperature reached 200 °C. Moreover, the stability of the CC structure near to N-terminus was found to be positively correlated with the heat resistance of Hpa1. Conclusions The stability of the CC structure might sever as an inner drive for mediating the heat resistance of harpin proteins. Our results offer a new insight into the interpretation of the mechanism involved in the heat resistance of harpin protein and provide a theoretical basis for further harpin function investigations and structure modifications.

scholarly journals THERMAL STABILITY OF SYNTHETIC PEPTIDES MIMICKING THE SEQUENCE OF THE REGION CONTAINING THE SKIP RESIDUES IN SQUID MYOSIN ROD

2017 ◽  
Vol 20 (2) ◽  
pp. 319
Author(s):  
Yoshihiro Ochiai ◽  
Mala Nurilmala ◽  
GuoFeng Wang ◽  
Shugo Watabed
Keyword(s):  
Thermal Stability ◽  
Synthetic Peptides ◽  
Coiled Coil ◽  
Thick Filament ◽  
Heptad Repeat ◽  
Major Protein ◽  
Amino Acid Residues ◽  
The Stability ◽  
Fish And Shellfish ◽  
Myosin Rod

Myosin is the major protein in skeletal muscles including those of fish and shellfish. The characteristics of this protein are closely related to the biological function and the quality and physical properties of muscle<br />food. In the myosin rod (the coiled-coil region of myosin), several amino acid residues, known as skip residues, seem to destabilize the ordered structure (heptad repeat). These residues might be responsible for reducing thermal stability. Attempts were thus made to examine the role of these residues in the rod of squid myosin, based on the thermodynamic properties of synthetic peptides which have been designed to mimic the partial sequence of myosin heavy chain from the squid Todarodes pacificus mantle muscle. Five peptides, namely, with the sequence of Trp1343 -Ala1372  having the skip residue Glu1357 at the center (Peptide WT), without the skip residue (Peptide Δ), with the replacements of the skip residue (Glu) by Ile, Gln and Pro (Peptides E/I, E/Q, and E/P, respectively) to modify the helix forming propensity, were synthesized. The results obtained showed that the stability of the peptides as measured by circular dichroism spectrometry was in the order of Peptide Δ &gt; Peptide WT &gt; Peptide E/Q &gt; Peptide E/P &gt; Peptide E/I. It is suggested that the presence of the skip residues dexterously tunes the stability or flexibility of the coiled-coil structure, thus possibly regulating thick filament formation and further gel formation ability of myosin.

The SPI2-encoded SseA chaperone has discrete domains required for SseB stabilization and export, and binds within the C-terminus of SseB and SseD

Microbiology ◽  
2004 ◽  
Vol 150 (7) ◽  
pp. 2055-2068 ◽  
Author(s):  
Daniel V. Zurawski ◽  
Murry A. Stein
Keyword(s):  
Type Iii Secretion ◽  
Coiled Coil ◽  
Amphipathic Helix ◽  
Yeast Two Hybrid ◽  
C Terminus ◽  
N Terminus ◽  
Domain Mapping ◽  
Self Association ◽  
Discrete Domains ◽  
Two Hybrid

SseA, a key Salmonella virulence determinant, is a small, basic pI protein encoded within the Salmonella pathogenicity island 2 and serves as a type III secretion system chaperone for SseB and SseD. Both SseA partners are subunits of the surface-localized translocon module that delivers effectors into the host cell; SseB is predicted to compose the translocon sheath and SseD is a putative translocon pore subunit. In this study, SseA molecular interactions with its partners were characterized further. Yeast two-hybrid screens indicate that SseA binding requires a C-terminal domain within both partners. An additional central domain within SseD was found to influence binding. The SseA-binding region within SseB was found to encompass a predicted amphipathic helix of a type participating in coiled-coil interactions that are implicated in the assembly of translocon sheaths. Deletions that impinge upon this putative coiled-coiled domain prevent SseA binding, suggesting that SseA occupies a portion of the coiled-coil. SseA occupancy of this motif is envisioned to be sufficient to prevent premature SseB self-association inside bacteria. Domain mapping on the chaperone was also performed. A deletion of the SseA N-terminus, or site-directed mutations within this region, allowed stabilization of SseB, but its export was disrupted. Therefore, the N-terminus of SseA provides a function that is essential for SseB export, but dispensable for partner binding and stabilization.

scholarly journals Differentiation of propeptide residues regulating the compartmentalization, maturation and activity of the broad-range phospholipase C of Listeria monocytogenes

2010 ◽  
Vol 432 (3) ◽  
pp. 557-566 ◽  
Author(s):  
Emily R. Slepkov ◽  
Alan Pavinski Bitar ◽  
Hélène Marquis
Keyword(s):  
Cell Wall ◽  
Listeria Monocytogenes ◽  
Amino Acid ◽  
Enzymatic Activity ◽  
Phospholipase C ◽  
Bacterial Pathogen ◽  
Amino Acid Residues ◽  
C Terminus ◽  
N Terminus ◽  
Vacuolar Acidification

The intracellular bacterial pathogen Listeria monocytogenes secretes a broad-range phospholipase C enzyme called PC-PLC (phosphatidylcholine phospholipase C) whose compartmentalization and enzymatic activity is regulated by a 24-amino-acid propeptide (Cys28–Ser51). During intracytosolic multiplication, bacteria accumulate the proform of PC-PLC at their membrane–cell-wall interface, whereas during cell-to-cell spread vacuolar acidification leads to maturation and rapid translocation of PC-PLC across the cell wall in a manner that is dependent on Mpl, the metalloprotease of Listeria. In the present study, we generated a series of propeptide mutants to determine the minimal requirement to prevent PC-PLC enzymatic activity and to identify residues regulating compartmentalization and maturation. We found that a single residue at position P1 (Ser51) of the cleavage site is sufficient to prevent enzymatic activity, which is consistent with P1′ (Trp52) being located within the active-site pocket. We observed that mutants with deletions at the N-terminus, but not the C-terminus, of the propeptide are translocated across the cell wall more effectively than wild-type PC-PLC at a physiological pH, and that individual amino acid residues within the N-terminus influence Mpl-mediated maturation of PC-PLC at acidic pH. However, deletion of more than 75% of the propeptide was required to completely prevent Mpl-mediated maturation of PC-PLC. These results indicate that the N-terminus of the propeptide regulates PC-PLC compartmentalization and that specific residues within the N-terminus influence the ability of Mpl to mediate PC-PLC maturation, although a six-residue propeptide is sufficient for Mpl to mediate PC-PLC maturation.

scholarly journals Stability and biological activities of heterodimeric and single-chain equine LH/chorionic gonadotropin variants

2008 ◽  
Vol 40 (4) ◽  
pp. 185-198 ◽  
Author(s):  
Sébastien Legardinier ◽  
Jean-Claude Poirier ◽  
Danièle Klett ◽  
Yves Combarnous ◽  
Claire Cahoreau
Keyword(s):  
Thermal Stability ◽  
Chorionic Gonadotropin ◽  
Sf9 Cells ◽  
Β Subunit ◽  
Single Chain ◽  
Α Subunit ◽  
C Terminus ◽  
N Terminus ◽  
Covalently Linked

Recombinant equine LH/chorionic gonadotropin (eLH/CG) was expressed in the baculovirus–Sf9 insect cell system either as a single-chain with the C-terminus of the β-subunit fused to the N-terminus of the α-subunit or as non-covalently linked heterodimers with or without a polyhistidine tag at various locations. All these non-covalently linked eLH/CG variants were secreted as stable heterodimers in the medium of infected Sf9 cells. To assess the influence of the presence and the position of polyhistidine tag on LH bioactivity, we expressed four non-covalently linked tagged heterodimeric eLH/CG variants that were secreted in threefold higher quantities than the single chain. Among them, only two exhibited full in vitro LH bioactivity, relative to untagged heterodimers, namely the one His-tagged at the N-terminus of α-subunit and the other at the C-terminus of the β-subunit both of which are amenable to nickel-affinity purification. Furthermore, single-chain eLH/CG was found to be N- and O-glycosylated but nevertheless less active in in vitro LH bioassays than natural eCG and heterodimeric recombinant eLH/CG. The thermal stability of natural and recombinant hormones was assessed by the initial rates of dissociation from 20 to 90 °C. Heterodimeric eLH/CG from Sf9 cells was found to be as stable as pituitary eLH and serum eCG (T1/2, 74–77 °C). Although Sf9 cells only elaborated short immature-type carbohydrate side chains on glycoproteins, recombinant eLH/CG produced in these cells exhibited stabilities similar to that of pituitary eLH. In conclusion, recombinant heterodimeric eLH/CG exhibits the same thermal stability as natural pituitary LH and its advantages over the single-chain eLH/CG include higher secretion, higher in vitro bioactivity, and reduced potential risk of immunogenicity.

Study on Acrylic Emulsion Adhesive Modified by Double Siloxane

2013 ◽  
Vol 395-396 ◽  
pp. 367-370
Author(s):  
Cai Hua Gao ◽  
Wen Lu Guo ◽  
Zhi Ming Jin
Keyword(s):  
Thermal Stability ◽  
Comparative Study ◽  
Heat Resistance ◽  
Chemical Process ◽  
Water Resistance ◽  
Orthogonal Experiment ◽  
Acrylic Emulsion ◽  
Macroscopic Properties ◽  
The Stability ◽  
Thermal Stability Of

The acrylic emulsion adhesive was modified by D4 and KH570 with chemical process, and we can get the modified product successfully via the best technology parameter which was confirmed by orthogonal experiment. The structure of acrylic was characterized by FTIR, while there was a comparative study on the macroscopic properties and thermal stability of the unmodified and modified product. The results showed that when m(D4):m(KH570) was 2:1, the dosage of emulsifier was 3.0%, the dosage of KPS was 4.0%, the monomer(soft and hard) ratio was 1:1, the stability of the acrylic emulsion adhesive modified by double siloxane was good, and its viscosity, water resistance, heat resistance were improved greatly.

scholarly journals Crystal structure of theMSMEG_4306gene product fromMycobacterium smegmatis

2018 ◽  
Vol 74 (3) ◽  
pp. 166-173
Author(s):  
Adarsh Kumar ◽  
Subramanian Karthikeyan
Keyword(s):  
Crystal Structure ◽  
Coiled Coil ◽  
Structural Similarity ◽  
Data Bank ◽  
Zinc Ion ◽  
Terminal Region ◽  
Amino Acid Residues ◽  
Secretion Systems ◽  
C Terminus ◽  
Zinc Ribbon

TheMSMEG_4306gene fromMycobacterium smegmatisencodes a protein of unknown function with 242 amino-acid residues that contains a conserved zinc-ribbon domain at its C-terminus. Here, the crystal structure of MSMEG_4306 determined by the single-wavelength anomalous dispersion method using just one zinc ion co-purified with the protein is reported. The crystal structure of MSMEG_4306 shows a coiled-coil helix domain in the N-terminal region and a zinc-ribbon domain in the C-terminal region. A structural similarity search against the Protein Data Bank using MSMEG_4306 as a query revealed two similar structures, namely CT398 fromChlamydia trachomatisand HP0958 fromHelicobacter pylori, although they share only ∼15% sequence identity with MSMEG_4306. Based on comparative analysis, it is predicted that MSMEG_4306 may be involved in secretion systems, possibly by interacting with multiple proteins or nucleic acids.

Expression in Escherichia coli of fragments of the coiled-coil rod domain of rabbit myosin: influence of different regions of the molecule on aggregation and paracrystal formation

1991 ◽  
Vol 99 (4) ◽  
pp. 823-836
Author(s):  
S.J. Atkinson ◽  
M. Stewart
Keyword(s):  
Escherichia Coli ◽  
Ionic Strength ◽  
Coiled Coil ◽  
Periodic Variation ◽  
Heptad Repeat ◽  
C Terminus ◽  
N Terminus ◽  
Low Ionic Strength ◽  
Myosin Rod

We have expressed in Escherichia coli a cDNA clone corresponding broadly to rabbit light meromyosin (LMM) together with a number of modified polypeptides and have used this material to investigate the role of different aspects of molecular structure on the solubility properties of LMM. The expressed material was characterized biochemically and structurally to ensure that it retained the coiled-coil conformation of the native molecule. Full-length recombinant LMM retained the general solubility properties of myosin and, although soluble at high ionic strength, precipitated when the ionic strength was reduced below 0.3 M. Constructs in which the ‘skip’ residues (that disrupt the coiled-coil heptad repeat) were deleted had solubility properties indistinguishable from the wild type, which indicated that the skip residues did not play a major role in determining the molecular interactions involved in assembly. Deletions from the N terminus of LMM did not alter the solubility properties of the expressed material, but deletion of 92 residues from the C terminus caused a large increase in solubility at low ionic strength, indicating that a determinant important for interaction between LMM molecules was located in this region. The failure of deletions from the molecule's N terminus to alter its solubility radically suggested that the periodic variation of charge along the myosin rod may not be as important as proposed for determining the strength of binding between molecules and thus the solubility of myosin.

Molecular Modeling and Virtual Screening of Molecular Inhibitors for Leptospiral Collagenase

2021 ◽  
Author(s):  
Vikram Kumar ◽  
Nagesh Srikaku ◽  
Veeranarayanan Surya Aathmanathan ◽  
Padikara K Satheeshkumar ◽  
Madanan Gopalakrishnan Madathiparambil ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Molecular Modeling ◽  
Active Site ◽  
Binding Sites ◽  
Catalytic Site ◽  
Simulation Studies ◽  
C Terminus ◽  
Ligand Binding Sites ◽  
N Terminus ◽  
The Stability

Abstract Collagenase is a virulence factor which facilitates the invasion of pathogenic Leptospira into the host. In the present study, the model of Leptopsiral collagenase was constructed by employing threading method with the crystal structure of collagenase G. Three ligand binding sites at N- terminus, catalytic site and C-terminus were predicted by Metapocket server. Among sixty seven inhibitors from the ChEBI and Zinc databases, Protohypericin is predicted as the best inhibitor since it binds at the catalytic site of Leptopsiral collagenase. Molecular dynamic simulation studies validated the stability of interaction between the active site of Leptospiral collagenase and Protohypericin. The docking and molecular simulation studies corroborated the potential of the ligand to curb leptospiral infection.

scholarly journals Phosphorylation of Serine 114 on Atg32 mediates mitophagy

2011 ◽  
Vol 22 (17) ◽  
pp. 3206-3217 ◽  
Author(s):  
Yoshimasa Aoki ◽  
Tomotake Kanki ◽  
Yuko Hirota ◽  
Yusuke Kurihara ◽  
Tetsu Saigusa ◽  
...  
Keyword(s):  
Signal Transduction ◽  
Quality Control ◽  
Significant Role ◽  
Coiled Coil ◽  
Adaptor Protein ◽  
Mitochondrial Quality Control ◽  
Signal Transduction Cascade ◽  
Coiled Coil Domain ◽  
C Terminus ◽  
N Terminus

Mitophagy, which selectively degrades mitochondria via autophagy, has a significant role in mitochondrial quality control. When mitophagy is induced in yeast, mitochondrial residential protein Atg32 binds Atg11, an adaptor protein for selective types of autophagy, and it is recruited into the vacuole along with mitochondria. The Atg11–Atg32 interaction is believed to be the initial molecular step in which the autophagic machinery recognizes mitochondria as a cargo, although how this interaction is mediated is poorly understood. Therefore, we studied the Atg11–Atg32 interaction in detail. We found that the C-terminus region of Atg11, which included the fourth coiled-coil domain, interacted with the N-terminus region of Atg32 (residues 100–120). When mitophagy was induced, Ser-114 and Ser-119 on Atg32 were phosphorylated, and then the phosphorylation of Atg32, especially phosphorylation of Ser-114 on Atg32, mediated the Atg11–Atg32 interaction and mitophagy. These findings suggest that cells can regulate the amount of mitochondria, or select specific mitochondria (damaged or aged) that are degraded by mitophagy, by controlling the activity and/or localization of the kinase that phosphorylates Atg32. We also found that Hog1 and Pbs2, which are involved in the osmoregulatory signal transduction cascade, are related to Atg32 phosphorylation and mitophagy.

scholarly journals Dimerization of ubiquilin is dependent upon the central region of the protein: evidence that the monomer, but not the dimer, is involved in binding presenilins

2006 ◽  
Vol 399 (3) ◽  
pp. 397-404 ◽  
Author(s):  
Diana L. Ford ◽  
Mervyn J. Monteiro
Keyword(s):  
Central Region ◽  
Regulatory Mechanism ◽  
Active Form ◽  
Cellular Proteins ◽  
Interacting Protein ◽  
C Terminus ◽  
N Terminus ◽  
The Stability ◽  
Insight Into

Ubiquilin proteins have been shown to interact with a wide variety of other cellular proteins, often regulating the stability and degradation of the interacting protein. Ubiquilin contains a UBL (ubiquitin-like) domain at the N-terminus and a UBA (ubiquitin-associated) domain at the C-terminus, separated by a central region containing Sti1-like repeats. Little is known about regulation of the interaction of ubiquilin with other proteins. In the present study, we show that ubiquilin is capable of forming dimers, and that dimerization requires the central region of ubiquilin, but not its UBL or the UBA domains. Furthermore, we provide evidence suggesting that monomeric ubiquilin is likely to be the active form that is involved in binding presenilin proteins. Our results provide new insight into the regulatory mechanism underlying the interaction of ubiquilin with presenilins.

Sign in / Sign up

Export Citation Format

Share Document