scholarly journals Electrospun nanofibers for the fabrication of engineered vascular grafts

2019 ◽  
Vol 13 (1) ◽  
Author(s):  
Sonia Fathi Karkan ◽  
Soodabeh Davaran ◽  
Reza Rahbarghazi ◽  
Roya Salehi ◽  
Abolfazl Akbarzadeh
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Physicochemical Properties ◽  
Review Paper ◽  
Vascular Grafts ◽  
Three Dimensional ◽  
Electrospun Nanofibers ◽  
Electrospun Fibers

Abstract Attention has recently increased in the application of electrospun fibers because of their putative capability to create nanoscale platforms toward tissue engineering. To some extent, electrospun fibers are applicable to the extracellular matrix by providing a three-dimensional microenvironment in which cells could easily acquire definite functional shape and maintain the cell-to-cell connection. It is noteworthy to declare that placement in different electrospun substrates with appropriate physicochemical properties enables cells to promote their bioactivities, dynamics growth and differentiation, leading to suitable restorative effects. This review paper aims to highlight the application of biomaterials in engineered vascular grafts by using electrospun nanofibers to promote angiogenesis and neovascularization

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

scholarly journals Harnessing the Topography of 3D Spongy-Like Electrospun Bundled Fibrous Scaffold via a Sharply Inclined Array Collector

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1444 ◽  
Author(s):  
Sun Hee Cho ◽  
Jeong In Kim ◽  
Cheol Sang Kim ◽  
Chan Hee Park ◽  
In Gi Kim
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Three Dimensional ◽  
Living System ◽  
Pivotal Role ◽  
Skin Tissue ◽  
Target Tissue ◽  
Fibrous Scaffold ◽  
Electrospun Scaffolds ◽  
Directional Change

To date, many researchers have studied a considerable number of three-dimensional (3D) cotton-like electrospun scaffolds for tissue engineering, including the generation of bone, cartilage, and skin tissue. Although numerous 3D electrospun fibrous matrixes have been successfully developed, additional research is needed to produce 3D patterned and sophisticated structures. The development of 3D fibrous matrixes with patterned and sophisticated structures (FM-PSS) capable of mimicking the extracellular matrix (ECM) is important for advancing tissue engineering. Because modulating nano to microscale features of the 3D fibrous scaffold to control the ambient microenvironment of target tissue cells can play a pivotal role in inducing tissue morphogenesis after transplantation in a living system. To achieve this objective, the 3D FM-PSSs were successfully generated by the electrospinning using a directional change of the sharply inclined array collector. The 3D FM-PSSs overcome the current limitations of conventional electrospun cotton-type 3D matrixes of random fibers.

scholarly journals Fabrication of 3D Printing Scaffold with Porcine Skin Decellularized Bio-Ink for Soft Tissue Engineering

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3522
Author(s):  
Su Jeong Lee ◽  
Jun Hee Lee ◽  
Jisun Park ◽  
Wan Doo Kim ◽  
Su A Park
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
3D Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Research Groups ◽  
Porcine Skin ◽  
Alginate Hydrogel ◽  
Chemical Treatments ◽  
Soft Tissue Engineering

Recently, many research groups have investigated three-dimensional (3D) bioprinting techniques for tissue engineering and regenerative medicine. The bio-ink used in 3D bioprinting is typically a combination of synthetic and natural materials. In this study, we prepared bio-ink containing porcine skin powder (PSP) to determine rheological properties, biocompatibility, and extracellular matrix (ECM) formation in cells in PSP-ink after 3D printing. PSP was extracted without cells by mechanical, enzymatic, and chemical treatments of porcine dermis tissue. Our developed PSP-containing bio-ink showed enhanced printability and biocompatibility. To identify whether the bio-ink was printable, the viscosity of bio-ink and alginate hydrogel was analyzed with different concentration of PSP. As the PSP concentration increased, viscosity also increased. To assess the biocompatibility of the PSP-containing bio-ink, cells mixed with bio-ink printed structures were measured using a live/dead assay and WST-1 assay. Nearly no dead cells were observed in the structure containing 10 mg/mL PSP-ink, indicating that the amounts of PSP-ink used were nontoxic. In conclusion, the proposed skin dermis decellularized bio-ink is a candidate for 3D bioprinting.

scholarly journals Hydrogel Properties and Their Impact on Regenerative Medicine and Tissue Engineering

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5795
Author(s):  
Adam Chyzy ◽  
Marta E. Plonska-Brzezinska
Keyword(s):  
Tissue Engineering ◽  
Regenerative Medicine ◽  
Physicochemical Properties ◽  
Three Dimensional ◽  
Modern Medicine ◽  
Wound Treatment ◽  
Chemical Modifications

Hydrogels (HGs), as three-dimensional structures, are widely used in modern medicine, including regenerative medicine. The use of HGs in wound treatment and tissue engineering is a rapidly developing sector of medicine. The unique properties of HGs allow researchers to easily modify them to maximize their potential. Herein, we describe the physicochemical properties of HGs, which determine their subsequent applications in regenerative medicine and tissue engineering. Examples of chemical modifications of HGs and their applications are described based on the latest scientific reports.

scholarly journals Three-dimensional multilayered fibrous constructs for wound healing applications

2016 ◽  
Vol 4 (2) ◽  
pp. 319-330 ◽  
Author(s):  
Tiago C. Reis ◽  
Steven Castleberry ◽  
Ana M. B. Rego ◽  
Ana Aguiar-Ricardo ◽  
Paula T. Hammond
Keyword(s):  
Wound Healing ◽  
Physicochemical Properties ◽  
Three Dimensional ◽  
Wound Dressings ◽  
Self Organization ◽  
Electrospun Fibers

Electrical driven self-organization of electrospun fibers is used to create topographically bioinspired three-dimensional multilayered constructs, with tunable morphological and physicochemical properties for ideal wound dressings.

Engineered Biomimetic Nanofibers for Regenerative Medicine

2010 ◽  
Vol 76 ◽  
pp. 114-124
Author(s):  
Seeram Ramakrishna ◽  
Jayarama Reddy Venugopal ◽  
Susan Liao
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Regenerative Medicine ◽  
Cardiac Tissue ◽  
Three Dimensional ◽  
Electrospun Nanofibers ◽  
Cost Effective ◽  
Bioactive Molecules ◽  
Natural Polymers ◽  
Hematopoietic Stem

Attempts have been made to fabricate nanofibrous scaffolds to mimic the chemical composition and structural properties of extracellular matrix (ECM) for tissue/organ regeneration. Nanofibers with various patterns have been successfully produced from synthetic and natural polymers through a relatively simple technique of electrospinning. The resulting patterns can mimic some of the diverse tissue-specific orientation and three-dimensional (3D) fibrous structure. Studies on cell-nanofiber interactions have revealed the importance of nanotopography on cell adhesion, proliferation and differentiation. Our recent data showed that hematopoietic stem cells (HSCs) as well as mesenchymal stem cells (MSCs) can rapidly and effectively attached to the functionalized nanofibers. Mineralized 3D nanofibrous scaffold with bone marrow derived MSCs has been applied for bone tissue engineering. The use of injectable nanofibers for cardiac tissue engineering applications is attractive as they allow for the encapsulation of cardiomyocytes/MSCs as well as bioactive molecules for the repair of myocardial infarction. Duplicate 3D heart helix microstructure by the nanofibrous cardiac patch might provide functional support for infarcted myocardium. Furthermore, clinical applications of electrospun nanofibers for regenerative medicine are highly feasible due to the ease and flexibility of fabrication with the cost-effective method of making nanofibers.

scholarly journals Fabrication of Nanohydroxyapatite/Poly(caprolactone) Composite Microfibers Using Electrospinning Technique for Tissue Engineering Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Mohd Izzat Hassan ◽  
Tao Sun ◽  
Naznin Sultana
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Three Dimensional ◽  
Average Diameter ◽  
Tissue Engineering Scaffold ◽  
Engineering Applications ◽  
Electrospinning Technique ◽  
Fibrous Scaffolds ◽  
Nanosized Hydroxyapatite ◽  
Poly Caprolactone

Tissue engineering fibrous scaffolds serve as three-dimensional (3D) environmental framework by mimicking the extracellular matrix (ECM) for cells to grow. Biodegradable polycaprolactone (PCL) microfibers were fabricated to mimic the ECM as a scaffold with 7.5% (w/v) and 12.5% (w/v) concentrations. Lower PCL concentration of 7.5% (w/v) resulted in microfibers with bead defects. The average diameter of fibers increased at higher voltage and the distance of tip to collector. Further investigation was performed by the incorporation of nanosized hydroxyapatite (nHA) into microfibers. The incorporation of 10% (w/w) nHA with 7.5% (w/v) PCL solution produced submicron sized beadless fibers. The microfibrous scaffolds were evaluated using various techniques. Biodegradable PCL and nHA/PCL could be promising for tissue engineering scaffold application.

scholarly journals Of balls, inks and cages: Hybrid biofabrication of 3D tissue analogs

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Nicanor Moldovan ◽  
Leni Maldovan ◽  
Michael Raghunath
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Hybrid Approach ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Support Structures ◽  
Cell Clusters ◽  
3D Space ◽  
Technical Solutions

The overarching principle of three-dimensional (3D) bioprinting is the placing of cells or cell clusters in the 3D space to generate a cohesive tissue microarchitecture that comes close to in vivo characteristics. To achieve this goal, several technical solutions are available, generating considerable combinatorial bandwidth: (i) Support structures are generated first, and cells are seeded subsequently; (ii) alternatively, cells are delivered in a printing medium, so-called “bioink,” that contains them during the printing process and ensures shape fidelity of the generated structure; and (iii) a “scaffold-free” version of bioprinting, where only cells are used and the extracellular matrix is produced by the cells themselves, also recently entered a phase of accelerated development and successful applications. However, the scaffold-free approaches may still benefit from secondary incorporation of scaffolding materials, thus expanding their versatility. Reversibly, the bioink-based bioprinting could also be improved by adopting some of the principles and practices of scaffold-free biofabrication. Collectively, we anticipate that combinations of these complementary methods in a “hybrid” approach, rather than their development in separate technological niches, will largely increase their efficiency and applicability in tissue engineering.

Mechanical and Chemical Stimulation of Bone-Marrow Stem Cells in a Three-Dimensional Fibrin Matrix: Preliminary Results

2008 ◽  
Author(s):  
Jessica L. LoSurdo ◽  
Douglas W. Chew ◽  
Alejandro Nieponice ◽  
David A. Vorp
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bone Marrow ◽  
Extracellular Matrix ◽  
Vascular Graft ◽  
Three Dimensional ◽  
Chemical Stimulation ◽  
Alternative Source ◽  
Immunological Rejection ◽  
Stimulation Of

The primary goal of tissue engineering is to develop a biological, mechanically-robust, and anti-thrombogenic vascular graft to replace diseased or damaged tissue and organs [1]. For example, researchers have incorporated smooth muscle cells (SMCs) into extracellular matrix to provide a living, functional conduits with the intended purpose of replacing SMC-containing tubes, such as the blood vessel, urethra, esophagus, intestine, etc. Although the preferred source is autologous cells to avoid immunological rejection, adult SMCs are difficult to obtain and expand. An alternative source of autologous cells could be bone marrow derived stem cells (BMSCs), which differentiate toward mesenchymal and hematopoietic lineages [2].

Sign in / Sign up

Export Citation Format

Share Document