Three-point bending test of sandwich beams supporting the GFRP footbridge design process—validation

2016 ◽  
pp. 489-492 ◽  
Author(s):  
Ł Pyrzowski ◽  
B Sobczyk ◽  
W Witkowski ◽  
J Chróścielewski
Keyword(s):  
Design Process ◽  
Bending Test ◽  
Sandwich Beams ◽  
Process Validation ◽  
Three Point Bending

scholarly journals Bending Behavior of Lightweight Wood-Based Sandwich Beams with Auxetic Cellular Core

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1723 ◽  
Author(s):  
Krzysztof Peliński ◽  
Jerzy Smardzewski
Keyword(s):  
Mechanical Properties ◽  
Experimental Studies ◽  
Numerical Calculations ◽  
Bending Test ◽  
Dissipated Energy ◽  
Sandwich Beams ◽  
Wood Composites ◽  
Three Point Bending ◽  
Good Ability ◽  
Bending Behavior

The work concerns a three-point bending test of beams made of plywood, high density fibre boards, cardboard, and wood-epoxy mass. The goal of the investigation was to determine the effect of thickness and type of wood-based facings on stiffness, strength, ability to absorb, and dissipate the energy of sandwich beams with an auxetic core. The cognitive goal of the work was to demonstrate the possibility of using recycled materials for facings and cores instead of popular wood composites. Experimental studies and numerical calculations were performed on correctly calibrated models. Experimental studies have shown that the beams with HDF facings (E = 1528 MPa, MOR = 12.61 MPa) and plywood facings (E = 1248–1395 MPa, MOR = 8.34–10.40 MPa) have the most favourable mechanical properties. Beams with plywood facings also have a good ability to absorb energy (1.380–1.746 J), but, in this respect, the beams manufactured of HDF (2.223 J) exhibited better capacity. The use of an auxetic core and facings of plywood and cardboard significantly reduces the amount of dissipated energy (0.0093 J, 0.0067 J). Therefore, this type of structures can be used for modeling beams carrying high deflections.

Bending Strength of Sandwich Beams with Nanocomposites Core

2009 ◽  
Vol 79-82 ◽  
pp. 577-580 ◽  
Author(s):  
Meng Kao Yeh ◽  
Chia Min Lin
Keyword(s):  
Bending Strength ◽  
Musical Instrument ◽  
Bending Test ◽  
Core Material ◽  
Sandwich Beams ◽  
Three Point Bending ◽  
Specific Strength ◽  
The Face ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Composite materials, having advantages of high specific strength, high specific stiffness, are used in many applications, such as musical instrument, acoustical tile, fire wall, sports equipment, aerospace and vehicle industries. Composite products in the form of sandwich structures are specifically useful in recent years. In this paper, the bending strength of sandwich structure made by graphite/epoxy face laminates and core material made by multi-walled carbon nanotubes (MWNTs) reinforced polymer was investigated experimentally. In experiment, the three-point bending test was performed to measure the bending properties of sandwich beams. The influences of fiber orientation in the face laminates and MWNTs content in polymer reinforced nanocomposite core material on the bending strength of sandwich beams were discussed in this paper. The failure mechanism of sandwich beams with various fiber orientations in the face laminates was also discussed.

Static and dynamic response of sandwich beams with lattice and pantographic cores

2021 ◽  
pp. 109963622110338
Author(s):  
Yury Solyaev ◽  
Arseniy Babaytsev ◽  
Anastasia Ustenko ◽  
Andrey Ripetskiy ◽  
Alexander Volkov
Keyword(s):  
Mechanical Performance ◽  
Lattice Structure ◽  
Unit Length ◽  
Experimental Tests ◽  
Plane Geometry ◽  
Sandwich Beams ◽  
Static Tests ◽  
Three Point Bending ◽  
The Core ◽  
The Impact

Mechanical performance of 3d-printed polyamide sandwich beams with different type of the lattice cores is investigated. Four variants of the beams are considered, which differ in the type of connections between the elements in the lattice structure of the core. We consider the pantographic-type lattices formed by the two families of inclined beams placed with small offset and connected by stiff joints (variant 1), by hinges (variant 2) and made without joints (variant 3). The fourth type of the core has the standard plane geometry formed by the intersected beams lying in the same plane (variant 4). Experimental tests were performed for the localized indentation loading according to the three-point bending scheme with small span-to-thickness ratio. From the experiments we found that the plane geometry of variant 4 has the highest rigidity and the highest load bearing capacity in the static tests. However, other three variants of the pantographic-type cores (1–3) demonstrate the better performance under the impact loading. The impact strength of such structures are in 3.5–5 times higher than those one of variant 4 with almost the same mass per unit length. This result is validated by using numerical simulations and explained by the decrease of the stress concentration and the stress state triaxiality and also by the delocalization effects that arise in the pantographic-type cores.

scholarly journals Additive Manufacturing-Based In Situ Consolidation of Continuous Carbon Fibre-Reinforced Polycarbonate

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2450
Author(s):  
Andreas Borowski ◽  
Christian Vogel ◽  
Thomas Behnisch ◽  
Vinzenz Geske ◽  
Maik Gude ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Carbon Fibre ◽  
Bending Test ◽  
Thermoplastic Composites ◽  
Experimental Investigations ◽  
Material Structure ◽  
Three Point Bending ◽  
Continuous Fibre ◽  
Local Material

Continuous carbon fibre-reinforced thermoplastic composites have convincing anisotropic properties, which can be used to strengthen structural components in a local, variable and efficient way. In this study, an additive manufacturing (AM) process is introduced to fabricate in situ consolidated continuous fibre-reinforced polycarbonate. Specimens with three different nozzle temperatures were in situ consolidated and tested in a three-point bending test. Computed tomography (CT) is used for a detailed analysis of the local material structure and resulting material porosity, thus the results can be put into context with process parameters. In addition, a highly curved test structure was fabricated that demonstrates the limits of the process and dependent fibre strand folding behaviours. These experimental investigations present the potential and the challenges of additive manufacturing-based in situ consolidated continuous fibre-reinforced polycarbonate.

Effect of Concrete Mixture Composition on Acoustic Emission and Fracture Parameters Obtained from Three-Point Bending Test

2015 ◽  
Vol 1100 ◽  
pp. 152-155
Author(s):  
Libor Topolář ◽  
Hana Šimonová ◽  
Petr Misák
Keyword(s):  
Acoustic Emission ◽  
Bending Test ◽  
Mixture Composition ◽  
Three Point Bending ◽  
Concrete Mixtures ◽  
Fracture Parameters ◽  
Fracture Tests ◽  
Stress Behaviour ◽  
Bending Fracture ◽  
Fracture Processes

This paper reports the analysis of acoustic emission signals captured during three-point bending fracture tests of concrete specimens with different mixture composition. Acoustic emission is an experimental tool well suited for monitoring fracture processes in material. The typical acoustic emission patterns were identified in the acoustic emission records for three different concrete mixtures to further describe the under-the-stress behaviour and failure development. An understanding of microstructure–performance relationships is the key to true understanding of material behaviour. The acoustic emission results are accompanied by fracture parameters determined via evaluation of load versus deflection diagrams recorded during three-point bending fracture tests.

scholarly journals Experimental and Numerical simulation of a Three Point Bending Test of a Stainless Steel Beam

2021 ◽  
Vol 55 ◽  
pp. 1114-1121
Author(s):  
Daniel Jindra ◽  
Zdeněk Kala ◽  
Jiří Kala ◽  
Stanislav Seitl
Keyword(s):  
Numerical Simulation ◽  
Stainless Steel ◽  
Bending Test ◽  
Steel Beam ◽  
Three Point Bending

scholarly journals Fracture and Size Effect of PFRC Specimens Simulated by Using a Trilinear Softening Diagram: A Predictive Approach

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3795
Author(s):  
Fernando Suárez ◽  
Jaime C. Gálvez ◽  
Marcos G. Alberti ◽  
Alejandro Enfedaque
Keyword(s):  
Reinforced Concrete ◽  
Size Effect ◽  
A Priori ◽  
Plain Concrete ◽  
Specimen Size ◽  
Bending Test ◽  
Orientation Factor ◽  
Fibre Reinforced Concrete ◽  
Softening Function ◽  
Three Point Bending

The size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function. Nevertheless, in the case of polyolefin-fibre-reinforced concrete (PFRC), this is not directly applicable, since using only diagram cannot capture the material behaviour on elements with different sizes due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin-fibre-reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin-fibre-reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well-known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner and then compared with a previous experimental campaign in which PFRC notched specimens of different sizes were tested with a three-point bending test setup, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

Experimental and Numerical Investigation of Critical Buckle Load of Composite Specimens

2015 ◽  
Vol 732 ◽  
pp. 85-90
Author(s):  
Lukáš Bek ◽  
Radek Kottner ◽  
Jan Krystek ◽  
Tomáš Kroupa
Keyword(s):  
Static Analysis ◽  
Glass Fibre ◽  
Large Deformations ◽  
Bending Test ◽  
Test Results ◽  
Beam Test ◽  
Three Point Bending ◽  
Box Beams ◽  
Buckle Beam ◽  
Thin Walled

Different carbon and glass fibre strips were subjected to the double clamp buckle beam test. Furthermore, thin-walled glass fibre box-beams were subjected to the three-point bending test. Results of experiments were compared to different numerical simulations using buckling analysis or static analysis considering large deformations.

Sign in / Sign up

Export Citation Format

Share Document