MODELING OF TECHNOLOGICAL METHODS TO IMPROVE WORKING CONDITIONS AT A CONSTRUCTION SITE

2021 ◽  
Vol 13 (4) ◽  
pp. 71-83
Author(s):  
Svetlana Sazonova ◽  
S. Nikolenko ◽  
Aleksandr Osipov

Dangerous and harmful production factors are considered, the impact of which is experienced by workers during the construction of any facility. Analyzed: the reasons for the formation of these factors for various types of work; equipment, structures and materials, the impact of which on working personnel can also lead to adverse situations. It is noted that the means of individual protection must be selected, paying attention to what kind of work will be performed by the employee and under what conditions. The most effective personal protective equipment and technological methods for improving working conditions at the facility are proposed for use by the workers of the object under consideration. The results obtained can be used to improve the working conditions of workers in warehouses with raw materials.

2020 ◽  
Vol 221 ◽  
pp. 01006
Author(s):  
Anastasia Evdokimova ◽  
Nina Rumyantseva

The article considers the sources of noise that have a negative effect on the electrician of the power plant, as well as on the environment. The analysis showed that noise is the main harmful production factor that adversely affects the working conditions of an electrician. In the course of the study, a set of measures to reduce the impact of industrial noise on the worker and the environment, including the installation of silencers, was proposed. The material used for the manufacture of the silencer, which can significantly reduce the level of industrial noise, was proposed. Recommendations for adjusting the work and rest regime were developed, and more effective personal protective equipment for an electrician was selected..


Author(s):  
Vitaliy Zochshuk

In this article general principles of the manufacturing of alcohol are presented. Existed dangerous hazards are described. The considered technological scheme of production of alcohol on the example of Shpaniv alcohol plant are offered. It is described specific threat and harmful production factors. It is stressed the impact of chemical hazards on the human body. Proposed personal protective equipment based on potential accidents in the process of operation and repair of the main technological equipment. Developed recommendations on use of technological equipment.


2019 ◽  
Vol 12 (2) ◽  
pp. 10-16 ◽  
Author(s):  
Алла Звягинцева ◽  
Alla Zvyaginceva ◽  
Светлана Сазонова ◽  
Svetlana Sazonova ◽  
Виктор Асминин ◽  
...  

The data of field measurements of harmful production factors at JSC "Lebedinsky GOK" in the working areas and at the enterprise as a whole are given. The data correspond to the types of official control and monitoring of the current state of the situation in the enterprise. The impact of harmful production factors in the workplace on the health of personnel, as well as the dust released during the work on environmental pollution of the adjacent territories is considered. The analysis of the results of control activities and existing environmental measures with a view to their improvement. The proposed types of control have been proposed to be used to improve working conditions in industries with increased exposure to harmful production factors due to the improvement of the types of control carried out and the necessary measures.


2020 ◽  
Vol 59 (04) ◽  
pp. 294-299 ◽  
Author(s):  
Lutz S. Freudenberg ◽  
Ulf Dittmer ◽  
Ken Herrmann

Abstract Introduction Preparations of health systems to accommodate large number of severely ill COVID-19 patients in March/April 2020 has a significant impact on nuclear medicine departments. Materials and Methods A web-based questionnaire was designed to differentiate the impact of the pandemic on inpatient and outpatient nuclear medicine operations and on public versus private health systems, respectively. Questions were addressing the following issues: impact on nuclear medicine diagnostics and therapy, use of recommendations, personal protective equipment, and organizational adaptations. The survey was available for 6 days and closed on April 20, 2020. Results 113 complete responses were recorded. Nearly all participants (97 %) report a decline of nuclear medicine diagnostic procedures. The mean reduction in the last three weeks for PET/CT, scintigraphies of bone, myocardium, lung thyroid, sentinel lymph-node are –14.4 %, –47.2 %, –47.5 %, –40.7 %, –58.4 %, and –25.2 % respectively. Furthermore, 76 % of the participants report a reduction in therapies especially for benign thyroid disease (-41.8 %) and radiosynoviorthesis (–53.8 %) while tumor therapies remained mainly stable. 48 % of the participants report a shortage of personal protective equipment. Conclusions Nuclear medicine services are notably reduced 3 weeks after the SARS-CoV-2 pandemic reached Germany, Austria and Switzerland on a large scale. We must be aware that the current crisis will also have a significant economic impact on the healthcare system. As the survey cannot adapt to daily dynamic changes in priorities, it serves as a first snapshot requiring follow-up studies and comparisons with other countries and regions.


Author(s):  
Andrey M. Geregey ◽  
Evgeny S. Shuporin ◽  
Ivan V. Fateev

Today, there are personal protective equipment, which due to their weight and size characteristics and design features can aggravate professional activity. This is characterized by an increase in the load on several major systems of the employee's body, including the cardiorespiratory system, which can cause the development of occupational pathology. The study of the functions of the cardiorespiratory system of humans in the process of his work is an important task in biomedical tests such as PPE, aggravating their professional activities and future means of individual protection from heavy labor and industrial exoskeletons. The aim of the study is to determine the possibility of using ergospirometry for the physiological assessment of personal protective equipment and industrial exoskeletons. Main part. In medical practice and high-performance sports, ergospirometry is considered the "gold standard" for functional assessment of the cardiorespiratory system. There are very few studies showing the use of ergospirometry for the purpose of physiological assessment of personal protective equipment. Results of research works in which ergospirometry was used in medicine, sports, as well as on the physiological and hygienic assessment of combat equipment, various types of personal protective equipment, including new promising personal protective equipment of the musculoskeletal system-industrial exoskeletons. The use of ergospirometry made it possible to register the main indicators of the human cardiorespiratory system both in field and laboratory conditions and allowed forming an objective conclusion about the dynamics of the degree of stress of the human cardiorespiratory system when using personal protective equipment and industrial exoskeletons with various weight and size characteristics. Thus, the use of ergospirometry both in isolation and in combination with other methods allows us to solve problems related to biomedical testing of personal protective equipment and industrial exoskeletons.


Author(s):  
L. Mavrina ◽  
E. Shaikhlislamova ◽  
I. Khasanova ◽  
L. Karimova ◽  
N. Muldasheva ◽  
...  

The relevance of the problem. Ensuring safe working conditions is currently an urgent problem of our time. Purpose of work. Analysis of bibliographic data on issues of occupational risk, industrial injuries among workers of the processing complex. Materials and methods. To achieve this goal, materials related to this topic were studied in the works of domestic and foreign scientists. Results. A lot of scientific works are devoted to the problem of assessing professional risk in the production of a processing complex. Modern research has proved that risk assessment is one of the main methods for analyzing the impact of various production factors on an employee. Conclusion Occupational morbidity and industrial injuries are a consequence of unsatisfactory conditions and labor protection in enterprises.


Work ◽  
2021 ◽  
pp. 1-14
Author(s):  
Mojtaba K. Danesh ◽  
Ehsan Garosi ◽  
Hamedeh Golmohamadpour

BACKGROUND: The COVID-19 pandemic has put health systems under unprecedented pressure, challenging their workforce, especially nurses. OBJECTIVE: The current paper presented a review of the early literature concerning emerging nursing challenges during the early stages of the COVID-19 pandemic. METHODS: A systematic search of the published literature between January and May 2020 was carried out in Medline, Science Direct, and Google Scholar to identify relevant quantitative and qualitative studies. RESULTS: Twenty-two original articles were retrieved, the majority of which were survey studies from China. Synthesis of the evidence resulted in four overarching themes including “being physically and mentally drained in the face of fear and uncertainty,” “shortage of personal protective equipment and usability issues,” “psychosomatic disturbances among nurses,” and “moderators to mitigate nurses’ challenges.” CONCLUSIONS: Providing care for demanding COVID-19 patients, nurses experienced a gruelling situation, during which a significant amount of psychological and physical distress was inflicted to them. However, receiving proper support from their organization and society could improve the condition substantially. Further research is required to explore the impact of the COVID-19 pandemic on nurses, especially from Western countries.


2021 ◽  
Vol 1 (S1) ◽  
pp. s9-s10
Author(s):  
Kenisha Evans ◽  
Jennifer LeRose ◽  
Angela Beatriz Cruz ◽  
Lavina Jabbo ◽  
Teena Chopra

Background: In 2019, according to the Centers for Disease Control and Prevention, carbapenem-resistant Enterobacteriaceae (CRE), had cost the lives of >35,000 patients, particularly the most virulent plasmid-mediated New Delhi metallo-β-lactamase (NDM). Although healthcare systems normally have strict surveillance and infection control measures for CRE, the rapid emergence of novel SAR-CoV-2 and COVID-19 led to a shortage of personal protective equipment (PPE) and medical supplies. As a result, routine infection practices, such as contact precautions, were violated. Studies have shown this depletion and shift in resources compromised the control of infections such CRE leading to rising horizontal transmission. Method: A retrospective study was conducted at a tertiary healthcare system in Detroit, Michigan, to determine the impact of PPE shortages during the COVID-19 pandemic on NDM infection rates. The following periods were established during 2020 based on PPE availability: (1) pre-PPE shortage (January–June), (2) PPE shortage (July–October), and (3) post-PPE shortage (November–December). Rates of NDM per 10,000 patient days were compared between periods using the Wilcoxon signed rank-sum test. Isolates were confirmed resistant by NDM by molecular typing performed by the Michigan State Health Department. Patient characteristics were gathered by medical chart review and patient interviews by telephone. Results: Overall, the average rate of NDM infections was 1.82 ±1.5 per 10,000 patient days. Rates during the PPE shortage were significantly higher, averaging 3.6 ±1.1 cases per 10,000 patient days (P = .02). During this time, several infections occurred within patients on the same unit and/or patients with same treating team, suggesting possible horizontal transmission. Once PPE stock was replenished and isolation practices were reinstated, NDM infection rates decreased to 0.77 ±1.1 per 10,000 patient days. Conclusion: Control of CRE requires strategic planning with active surveillance, antimicrobial constructs, and infection control measures. The study illustrates that in times of crisis, such as the COVID-19 pandemic, the burden of effective infection control requires much more multidisciplinary efforts to prevent unintentional lapses in patient safety. A swift response by the state and local health departments at a tertiary-care healthcare center conveyed a positive mitigation of the highest clinical threats and decreased horizontal transmission of disease.Funding: NoDisclosures: None


2021 ◽  
Author(s):  
Felicity Hasson ◽  
Paul Slater ◽  
Anne Fee ◽  
Tracey McConnell ◽  
Sheila Payne ◽  
...  

Abstract BackgroundGlobally COVID-19 has had a profound impact on the provision of healthcare, including palliative care. However, there is little evidence about the impact of COVID-19 on delivery of out-of-hours specialist palliative care services in the United Kingdom. The aim of the study is to investigate the impact of the COVID-19 pandemic on the delivery of out-of-hours community-based palliative care services.Methods A national online census survey of managers of adult hospices in the United Kingdom was undertaken. Survey were emailed to managers of adult hospices (n=150) who provided out-of-hours community palliative care services. Fifteen questions related specifically to the impact of COVID-19 and data were analysed thematically.ResultsEighty-one responses to the survey were returned (54% response rate); 59 were complete of which 47 contained COVID-19 data. Findings indicated that COVID-19 impacted on out-of-hours community-based palliative care. To meet increased patient need, hospices reconfigured services; redeployed staff; and introduced new policies and procedures to minimize virus transmission. Lack of integration between charitably and state funded palliative care providers was reported. The interconnected issues of the use and availability of Personal Protective Equipment (n=21) and infection control screening (n=12) resulted in changes in nursing practices due to fear of contagion for patients, carers and staff. Conclusions Survey findings suggest that due to increased demand for community palliative care services, hospices had to rapidly adapt and reconfigure services. Even though this response to the pandemic led to some service improvements, in the main, out-of-hours service reconfiguration resulted in challenges for hospices, including workforce issues, and availability of resources such as Personal Protective Equipment. These challenges were exacerbated by lack of integration with wider healthcare services. More research is required to fully understand the implications of such changes on the quality of care provided.


Author(s):  
E.F. Chernikova ◽  
◽  
I.V. Fedotova ◽  
M.M. Nekrasova

Abstract: Working conditions at metallurgical enterprises are characterized by the impact of a complex of harmful production factors that do not correspond to the normalized levels, which causes the risk of developing professional and professionally conditioned pathology. Trained workers who are exposed for a long time to industrial noise that exceeds the permissible values by 10 dB or more are considered as a risk group for the development of aural (sensorineural hearing loss, SHT) and extraaural (high blood pressure, HBP) pathology. Hearing loss is an important medical and social problem, as it turns into a cognitive dissonance and a violation of verbal communication for the employee. Working conditions at one of the modern metallurgical plants were evaluated according to the data of sanitary and hygienic characteristics of working conditions. The study of the prevalence of SHT and HBP was carried out based on the materials of a medical examination and a questionnaire survey of workers (n=73, male, aged 36-75 years (57.32±0.89), with work experience of 8-58 years (34.29±1.16)). To assess the joint influence of age and seniority, an original scoring system was used, which allowed us to distinguish 3 observation groups. The severity of SHT and HBP was also assessed in points. The study showed a significant increase in the prevalence and severity of hearing loss and HBP with an increase in the duration of exposure and the age of employees. The presence of a close relationship between the analyzed pathology and working conditions is illustrated by the value of the odds ratio in groups 1-3 (ORSHT = 3.75-4.71; ORHBP = 2.0-5.0). Thus, the studied professional group of trained qualified metallurgists needs to develop health-improving measures to preserve labor longevity.


Sign in / Sign up

Export Citation Format

Share Document