scholarly journals PROSPECTS FOR THE DEVELOPMENT OF REGIONAL SUNFLOWER OIL PRODUCTION

2019 ◽  
Vol 14 (1) ◽  
pp. 113-119
Author(s):  
Наталья Александрова ◽  
Natal'ya Aleksandrova ◽  
Асия Субаева ◽  
Asiya Subaeva ◽  
Айрат Валиев ◽  
...  
Keyword(s):  
Seed Production ◽  
Sunflower Oil ◽  
Storage System ◽  
Production Costs ◽  
Air Cooling ◽  
Selling Price ◽  
Total Production ◽  
Oil Seed ◽  
Percentage Points ◽  
Sunflower Production

For 2010 - 2018 the role of sunflower in the agricultural production of the region has increased significantly, due to the high payback of this crop. Against the background of expanding acreage and yield growth, there is a significant increase in gross harvest of oilseeds. However, a high level of supply slows down the growth rates of the selling price and the efficiency of the industry. As a result, it is necessary to search for reserves to increase the profitability of sunflower oil seed production in the region. In order to study the influence of a number of factors on the profitability of sunflower production, agricultural organizations of the Ulyanovsk region carried out a correlation and regression analysis. The sample was carried out on 74 organizations involved in the cultivation of sunflower. The quantitative characteristics obtained in the course of the correlation-regression study indicate a significant impact on the efficiency of the industry on the level of yield of sunflower. Thus, with an increase in crop yield by 1 centners per hectare, the profitability of production increases by 2.11 percentage points. Seed costs and selling prices have a significant impact on the growth of profitability of sunflower production. With an increase in the selling price of 1 rub. The industry’s efficiency increases by an average of 0.11 ppt. Increase in the share of seed costs in total production costs by 1 percentage point leads to an increase in the effective trait by 0.1 percentage points. The dynamic development of sunflower oil seed production in the region is possible only on the basis of the activation of innovative processes that affect the efficiency and competitiveness of the industry. A possible innovation in the development of the oilseeds production and storage system in the absence of its own modern elevator capacities is the use of prefabricated storage facilities, the system of which provides for active ventilation, air cooling, and product quality control.

scholarly journals Rectified ethanol production cost analysis

2011 ◽  
Vol 15 (2) ◽  
pp. 281-292 ◽  
Author(s):  
Nikola Budimir ◽  
Marko Jaric ◽  
Branislav Jacimovic ◽  
Srbislav Genic ◽  
Nikola Jacimovic
Keyword(s):  
Raw Materials ◽  
The United States ◽  
Influential Factors ◽  
Production Costs ◽  
Selling Price ◽  
Total Production ◽  
The European Union ◽  
Total Investment ◽  
Relationship Of ◽  
The Impact

This paper deals with the impact of the most important factors of the total production costs in bioethanol production. The most influential factors are: total investment costs, price of raw materials (price of biomass, enzymes, yeast), and energy costs. Taking into account these factors, a procedure for estimation total production costs was establish. In order to gain insight into the relationship of production and selling price of bioethanol, price of bioethanol for some countries of the European Union and the United States are given.

scholarly journals Effect of postharvest on the economic viability of walnut production

2018 ◽  
Vol 24 (1-2) ◽  
Author(s):  
F. Apáti ◽  
E. Kovács ◽  
M. Kocsis
Keyword(s):  
Net Present Value ◽  
Production Costs ◽  
Selling Price ◽  
Total Production ◽  
Yield Level ◽  
Profitability Analysis ◽  
Production Value ◽  
Attainable Yield ◽  
The Cost ◽  
Postharvest Loss

In this study we were studying the question whether walnut production under domestic natural and economic circumstances shall be considered a profitable activity or not. Our partial objective is to determine, what level of natural inputs and production costs are required for walnut production, what yield level, selling price and production value can be attained, what level of profitability, rentability and efficiency may production have, is the establishment of a walnut orchard profitable on the entire lifespan of the plantation, and the production of which is more efficient: the dry shelled walnut production requiring postharvest activity or the raw, shelled walnut without postharvest activities. In this study, comparison of two systems is conducted. First version: producer establishes a walnut plantation and sells walnut raw and shelled. Second version: producer also invests into a drying facility, and in this case the end product is the dry, shelled walnut. If the producer sells walnut right after harvest in a raw bulk, total production costs in productive years reaches 974,011 HUF/ha. Attainable yield is 2.63 t/ha with 396.3 HUF/kg selling price, therefore the profit is 138,258 HUF/ha with 14.19% cost-related profitability. In the case when the producer sells dried, shelled walnut, production costs are 25% higher compared to that of raw walnut due to the cost of drying. By calculating with the postharvest loss, average yield is 1.84 t/ha, however, its selling price is way higher (882.84 HUF/kg), therefore the profit per hectare reaches 475,496 HUF with 39.01% cost-related profitability. Thus it can be stated that walnut production in an average year may be profitable even without postharvest, but efficiency is improved significantly when the producer sells the products dried. Investment profitability analysis revealed that production of raw, shelled walnut is not economically viable, since the plantation does not pay off on its entire lifespan (30 years), while walnut production with postharvest is efficient and rentable, since both net present value (NPV) and internal rate of return (IRR) showed more favourable values than in the previous case, and the orchard pays off in the 21th year after establishment.

scholarly journals ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DENGAN METODE FULL COSTING DALAM MENENTUKAN HARGA JUAL 1 | P a g e PADA PT. KRESNA EKA PRATAMA

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Tantri Amalia ◽  
N. A. Rumiasih ◽  
Muhamad Zakie Hanifan
Keyword(s):  
Descriptive Analysis ◽  
Production Costs ◽  
Selling Price ◽  
Total Production ◽  
Quantitative Descriptive Analysis ◽  
Heavy Equipment ◽  
Equipment Construction ◽  
Quantitative Descriptive ◽  
The Cost ◽  
A Company

<p>This study aims to determine: The purpose of this study was to find out how to <br />calculate the cost of goods in determining prices. The author conducted research at PT. Kresna Eka Pratama, a company engaged in heavy equipment construction. The research method used is descriptive qualitative and quantitative descriptive analysis. Methods for studying and analyzing the relationships and variable variables<br />examined by the author. In this study the author uses the Full Costing method as the basis for pricing at PT. Kresna Eka Pratama.</p><p>The results showed that the calculation of the cost of goods produced by<br />Full Costing was Rp. 8.873.507.700/unit, in accordance with the accounting school  can also provide profits desired by the company. This shows that the measurement of Full Costing production prices has a very important role in determining prices that<br />will affect the level of income and expected profits. With precise and accurate <br />calculations, determining the selling price will be very effective and reliable. In<br />determining this price is a profit of 10% of the total production costs after adding<br />non-production costs.</p>

Bio-plastic (poly-hydroxy-alkanoate) production from municipal sewage sludge in the Netherlands: a technology push or a demand driven process?

2016 ◽  
Vol 74 (2) ◽  
pp. 353-358 ◽  
Author(s):  
E. D. Bluemink ◽  
A. F. van Nieuwenhuijzen ◽  
E. Wypkema ◽  
C. A. Uijterlinde
Keyword(s):  
Sewage Sludge ◽  
Market Price ◽  
Cost Effective ◽  
Production Costs ◽  
Municipal Sewage Sludge ◽  
Selling Price ◽  
Total Production ◽  
Market Demand ◽  
Quality Aspects ◽  
Pha Production

Valorisation of components from municipal ‘waste’ water and sewage sludge gets more and more attention in order to come to a circular economy by developing an efficient ‘waste’ to value concept. On behalf of the transition team ‘Grondstoffenfabriek’ (‘Resource factory’) a preliminary research was performed for all the Dutch water boards to assess the technical and economical feasibility of poly-hydroxy-alkanoate (PHA)-production from sewage sludge, a valuable product to produce bio-plastics. This study reveals that the production of bio-plastics from sewage sludge is feasible based on technical aspects, but not yet economically interesting, even though the selling price is relatively close to the actual PHA market price. (Selling price is in this particular case the indicative cost effective selling price. The cost effective selling price covers only the total production costs of the product.) Future process optimization (maximizing the volatile fatty acids production, PHA storage capacity, etc.) and market developments are needed and will result in cost reductions of the various sub-processes. PHA-production from sewage sludge at this stage is just a technology; every further research is needed to incorporate the backward integration approach, taking into account the market demand including associated product quality aspects.

Innovative infrastructure of forestry systems : forest breeding and seed production centers

10.12737/8480 ◽  
2015 ◽  
Vol 4 (4) ◽  
pp. 221-230 ◽  
Author(s):  
Васильев ◽  
Igor Vasilev ◽  
Морковина ◽  
Svetlana Morkovina ◽  
Иванова ◽  
...  
Keyword(s):  
Seed Production ◽  
Public Private Partnership ◽  
The State ◽  
Production Costs ◽  
Total Production ◽  
Private Partnership ◽  
The Creation

The article describes the features of creation of forest infrastructure in the afforestation and the need for the creation and development of innovative forest infrastructure objects - forest breeding and seed pro-duction centers is proved. Creating FBSPC with the participation of the state through the mechanism of public-private partnership leads to the absence of depreciation charges, and as a consequence of decrease in the total production costs.

Immaterial Cost and Production: Maximum Production Cost Level Through Marginal Approach

2020 ◽  
Vol 8 (2) ◽  
pp. 128-149
Author(s):  
Dini Maulana Lestari
Keyword(s):  
Quantitative Study ◽  
Marginal Cost ◽  
Production Cost ◽  
Maximum Level ◽  
Production Costs ◽  
Total Production ◽  
Sugar Factory ◽  
Maximum Production ◽  
Cost Approach ◽  
South Sulawesi

This paper will discuss about the immaterial costs and production yields at one of the refined sugar factory companies in Makassar, South Sulawesi. The theory is based on the fact that Immaterial is a cost that is almsgiving, meaning costs that are outside of the basic costs of the company in producing production, so this research aims to find out: (1) what is the production cost needed to produce this production, (2) the maximum level of production at company from 2013 to 2017. This type of research is a quantitative study because it uses a questionnaire in the form of values ​​that are processed using the marginal cost approach formula. The results of the analysis show that (1) the maximum level of production costs occurred in 2016 amounting to 6,912 with an Immaterial cost of Rp. 2,481,796,800 and the total production produced is 359,077.3 tons (2) The required workforce with the total production produced is 359,077.3 tones of 180 people including the maximum production point which means that the lowest value is achieved (optimal).    

MINIMALISASI BIAYA SIMPAN DAN BIAYA SETUP PADA MULTIPLE PRODUK: SIMULASI DENGAN CAPACITATED LOT SIZING PROBLEM

2019 ◽  
Vol 4 (2) ◽  
pp. 205-214
Author(s):  
Erika Fatma
Keyword(s):  
Production Cost ◽  
Lot Sizing ◽  
Setup Time ◽  
Production Costs ◽  
Total Production ◽  
Product Cycle ◽  
Lot Size ◽  
Setup Costs ◽  
Lot Sizing Problem ◽  
Capacitated Lot Sizing

Lot sizing problem in production planning aims to optimize production costs (processing, setup and holding cost) by fulfilling demand and resources capacity costraint. The Capacitated Lot sizing Problem (CLSP) model aims to balance the setup costs and inventory costs to obtain optimal total costs. The object of this study was a plastic component manufacturing company. This study use CLSP model, considering process costs, holding costs and setup costs, by calculating product cycle and setup time. The constraint of this model is the production time capacity and the storage capacity of the finished product. CLSP can reduce the total production cost by 4.05% and can reduce setup time by 46.75%.  Keyword: Lot size, CLSP, Total production cost.

LOCATION OF OILSEED PRODUCTION IN TERMS OF VEGETABLE OIL EXPORT

2020 ◽  
Vol 1 (10) ◽  
pp. 94-100
Author(s):  
Yu. V. RAGULINA ◽  
Keyword(s):  
Seed Production ◽  
Vegetable Oil ◽  
Vegetable Oils ◽  
Sunflower Oil ◽  
World Export ◽  
Oil Export ◽  
Oilseed Production

The article is devoted to the issues of placing seed production in the conditions of world export of vegetable oils. In 2019, the volume of Russian exports of sunflower oil exceeded 3 million tons for a total of $ 2,2 billion, which is about 30% of the vegetable oil produced in the country. In Russia, the main oilseeds are sunflower, rapeseed, and soy. Less common crops include oilseed flax, ginger, mustard, and safflower. It is stated that in 2001–2019, the acreage of all types of oilseeds in the country increased by more than 2 times, and the gross harvest – by 3,3 times, while the yield increased by 1,4 times.

Capacity Planning for Cluster Tools of Wafer Fabrication Plant

2010 ◽  
Vol 450 ◽  
pp. 365-368
Author(s):  
James C. Chen ◽  
Chia Wen Chen ◽  
Kou Huang Chen ◽  
Chien Hsin Lin
Keyword(s):  
Capacity Planning ◽  
Production Costs ◽  
Wafer Fabrication ◽  
Total Production ◽  
Output Rate ◽  
Cluster Tools ◽  
And Performance ◽  
Using Data ◽  
Capital Intensive

Wafer fabrication is a capital intensive industry. A 12-inch wafer fabrication plant needs a typical investment of US$ 3 billion, and the equipment cost constitutes about two-thirds to three-quarters of the total production costs. Therefore, capacity planning is crucial to the investment and performance of wafer fabrication plants. Several formulae are presented to calculate the required number of machines with sequential, parallel, and batch processing characteristics, respectively. An AutoSched AP simulation model using data from real foundry fabrication plants is used in a case study to evaluate the performance of the proposed formulae. Simulation results indicate that the proposed formulae can quickly and accurately calculate the required number of cluster tools leading to the required monthly output rate.

Sign in / Sign up

Export Citation Format

Share Document