scholarly journals Measurement of Sigma Level from Consumer Sound Side in Fried Oil Product

2021 ◽  
Vol 0 (1) ◽  
pp. 367
Author(s):  
Julianus Hutabarat ◽  
Riwayati Triswanti ◽  
Renny Septiari
Keyword(s):  
Sigma Level ◽  
Sound Side ◽  
Fried Oil

scholarly journals Discovery of higher-order quantum electrodynamics effect for the vacuum pair production

2021 ◽  
Vol 2021 (8) ◽  
Author(s):  
W. Zha ◽  
Z. Tang
Keyword(s):  
Pair Production ◽  
Quantum Electrodynamics ◽  
World Wide ◽  
Order Effect ◽  
Higher Order ◽  
Lepton Pair ◽  
Scientific Problem ◽  
Sigma Level ◽  
Level Of Significance ◽  
Important Milestone

Abstract The higher-order quantum electrodynamics (QED) effect for vacuum pair production has been searched without success since 1954. In this paper, we show that the combined world-wide data of lepton pair vacuum production is about 20% smaller than the latest lowest order QED calculation with a 5.2 sigma-level of significance and is consistent with the corresponding higher-order QED result. We claim the discovery of higher-order effect for the QED pair production, which settles the dust of previous debates for several decades. The verification of higher-order QED effect is a fundamental scientific problem, which is an important milestone towards the nonperturbative and nonlinear regime of QED vacuum.

scholarly journals Chemical Abundances of Seven Outer Halo M31 Globular Clusters from the Pan-Andromeda Archaeological Survey

2016 ◽  
Vol 11 (S321) ◽  
pp. 10-12
Author(s):  
Charli M. Sakari
Keyword(s):  
Globular Clusters ◽  
Milky Way ◽  
Dwarf Galaxy ◽  
Large Magellanic Cloud ◽  
Archaeological Survey ◽  
Chemical Abundances ◽  
Light Spectra ◽  
Sigma Level ◽  
Stellar Streams ◽  
Detailed Chemical

AbstractObservations of stellar streams in M31’s outer halo suggest that M31 is actively accreting several dwarf galaxies and their globular clusters (GCs). Detailed abundances can chemically link clusters to their birth environments, establishing whether or not a GC has been accreted from a satellite dwarf galaxy. This talk presents the detailed chemical abundances of seven M31 outer halo GCs (with projected distances from M31 greater than 30 kpc), as derived from high-resolution integrated-light spectra taken with the Hobby Eberly Telescope. Five of these clusters were recently discovered in the Pan-Andromeda Archaeological Survey (PAndAS)—this talk presents the first determinations of integrated Fe, Na, Mg, Ca, Ti, Ni, Ba, and Eu abundances for these clusters. Four of the target clusters (PA06, PA53, PA54, and PA56) are metal-poor ([Fe/H] < -1.5), α-enhanced (though they are possibly less alpha-enhanced than Milky Way stars at the 1 sigma level), and show signs of star-to-star Na and Mg variations. The other three GCs (H10, H23, and PA17) are more metal-rich, with metallicities ranging from [Fe/H] = -1.4 to -0.9. While H23 is chemically similar to Milky Way field stars, Milky Way GCs, and other M31 clusters, H10 and PA17 have moderately-low [Ca/Fe], compared to Milky Way field stars and clusters. Additionally, PA17’s high [Mg/Ca] and [Ba/Eu] ratios are distinct from Milky Way stars, and are in better agreement with the stars and clusters in the Large Magellanic Cloud (LMC). None of the clusters studied here can be conclusively linked to any of the identified streams from PAndAS; however, based on their locations, kinematics, metallicities, and detailed abundances, the most metal-rich PAndAS clusters H23 and PA17 may be associated with the progenitor of the Giant Stellar Stream, H10 may be associated with the SW Cloud, and PA53 and PA56 may be associated with the Eastern Cloud.

Measure and Analyze the Problems of Concrete Mixture Production via Six Sigma DMAIC Tools: Central Concrete Mix Plant as a Case Study

2012 ◽  
Vol 622-623 ◽  
pp. 472-477
Author(s):  
Ali A. Karakhan ◽  
Angham E. Alsaffar
Keyword(s):  
Six Sigma ◽  
Business Strategy ◽  
Concrete Mixture ◽  
Statistical Tools ◽  
Sigma Level ◽  
Defect Rate ◽  
Concrete Production ◽  
Concrete Mix ◽  
Six Sigma Methodology

The aims of this study are to measure the defect rate and analyze the problems of production of ready concrete mixture plant by using Six Sigma methodology which is a business strategy for operations improvement depending basically on the application of its sub-methodology DMAIC improvement cycle and the basic statistical tools where the process sigma level of concrete production in the case study was 2.41 σ.

Reuse of Fried Oil to Obtain Biodiesel: Zeolites Y as a Catalyst

2007 ◽  
Vol 5 (1) ◽  
Author(s):  
A. Brito ◽  
M. E. Borges ◽  
R. Arvelo ◽  
F. Garcia ◽  
M. C. Diaz ◽  
...  
Keyword(s):  
Fixed Bed ◽  
Weight Ratio ◽  
Degree Of Conversion ◽  
Transesterification Reaction ◽  
Molar Ratio ◽  
Catalytic Reactor ◽  
Reaction Products ◽  
Waste Oil ◽  
Catalytic Effects ◽  
Fried Oil

The transesterification reaction is the most utilized process to obtain biodiesel. Fried oil transesterification reactions with methanol have been studied using several zeolites Y and interchanged with CsCl and KOH. The reaction has been carried out both in a slurry reactor and a fixed bed catalytic reactor. The catalytic effects of zeolites have been tested within a temperature range of 60-476°C, 2.5-5% catalyst/waste oil weight ratio, and 6:1 - 100:1 methanol/oil molar ratio. Cosolvents (THF, n-hexane) in the reaction feedstock effect have also been studied as well as catalyst regeneration effects. Viscosity of both the oil and the transesterification reaction products was determined as an initial guide to investigate the degree of conversion to biodiesel as well as FAME content by GC. When interchanged zeolites are used conversions are improved, getting the best yields (98% FAME) for the Y756 zeolite interchanged with KOH. Viscosities of the reaction product obtained reached values next to diesel standard ones.

Recent results in trapped-ion quantum computing at NIST

2001 ◽  
Vol 1 (Special) ◽  
pp. 113-123
Author(s):  
D. Kielpinski ◽  
A. Ben-Kish ◽  
J. Britton ◽  
V. Meyer ◽  
M.A. Rowe ◽  
...  
Keyword(s):  
The State ◽  
Entangled State ◽  
Bell’S Inequality ◽  
Ambient Conditions ◽  
Bell's Inequality ◽  
Quantum Register ◽  
Sigma Level ◽  
Universal Quantum ◽  
Encoding Method ◽  
First Time

We review recent experiments on entanglement, Bell's inequality, and decoherence-free subspaces in a quantum register of trapped {9Be+} ions. We have demonstrated entanglement of up to four ions using the technique of Molmer and Sorensen. This method produces the state ({|\uparrow\uparrow\rangle}+{|\downarrow\downarrow\rangle})/\sqrt{2} for two ions and the state ({\downarrow}{\downarrow}{\downarrow}{\downarrow} \rangle + | {\uparrow}{\uparrow}{\uparrow}{\uparrow} \rangle)/\sqrt{2} for four ions. We generate the entanglement deterministically in each shot of the experiment. Measurements on the two-ion entangled state violates Bell's inequality at the 8\sigma level. Because of the high detector efficiency of our apparatus, this experiment closes the detector loophole for Bell's inequality measurements for the first time. This measurement is also the first violation of Bell's inequality by massive particles that does not implicitly assume results from quantum mechanics. Finally, we have demonstrated reversible encoding of an arbitrary qubit, originally contained in one ion, into a decoherence-free subspace (DFS) of two ions. The DFS-encoded qubit resists applied collective dephasing noise and retains coherence under ambient conditions 3.6 times longer than does an unencoded qubit. The encoding method, which uses single-ion gates and the two-ion entangling gate, demonstrates all the elements required for two-qubit universal quantum logic.

scholarly journals Quality improvements on creative industry by using Six Sigma: a study case

2018 ◽  
Vol 154 ◽  
pp. 01088
Author(s):  
Dwi Adi Purnama ◽  
Riadho Clara Shinta ◽  
Vembri Noor Helia
Keyword(s):  
Six Sigma ◽  
Textile Industry ◽  
Fuzzy Ahp ◽  
Creative Economy ◽  
Creative Industry ◽  
Quality Improvements ◽  
Sigma Level ◽  
Study Case ◽  
And Control ◽  
Hierarchy Process

Indonesia has several creative economy sectors that rapidly developed and potentially can be improved to 7% annually. One of them is textile industry specifically bag industry. This industry’s development could enhance the production of commodities and emerge other SMEs to initiate the similar field. Therefore, to raise its profit, customer’s satisfaction must be elevated by minimizing defected products. In order to support it, an improvement on production process is a must. This research employs Six Sigma methods integration with Fuzzy Analytical Hierarchy Process (Fuzzy AHP)-Failure Mode and Effect Anlysis (FMEA). Six Sigma is designated to analyze the level of products’ defect through Define, Measure, Analyze, Improve, and Control (DMAIC) stages and assess the factors that cause the defects by using Fuzzy AHP decision support system and FMEA in risk analysis on defect. The result of the research shows the shortage of defects that demonstrated by DPMO indicator and Sigma level. It is identified that the number of DPMO was being reduced from 20003.75 to 11185.73. While Six Sigma level demonstrated the enhancement from 3.61 to 3.86. Those suggest that the improvement solution provides has significant effect on the defects decreasing at the bag convection industry.

scholarly journals QUALITY IMPROVEMENT ON CERAMIC TILES PROUCTION PROCESS WITH SIX SIGMA METHOD (DMAIC) AT PT ARWANA CITRAMULIA

2018 ◽  
Vol 3 (2) ◽  
pp. 101
Author(s):  
Priskila Christine Rahayu ◽  
Vanesa Darvin
Keyword(s):  
Quality Improvement ◽  
Production Process ◽  
Six Sigma ◽  
Ceramic Tiles ◽  
Control Approach ◽  
Sigma Level ◽  
And Control

This study focused on quality improvement on ceramic tiles production process at PT Arwana Citramulia. This study used data defects for 12 months (May 2016 – April 2017) and only focus on one type of defect and it is chop corner. Six sigma with DMAIC (define, measure, analyze, improve, and control) approach was used to improve the process. Each step of DMAIC was conducted to carefully analyze and keep the process precisely. The ceramic tiles production process contains a number of 4375 products defects in million opportunities (DPMO), with sigma level of 4.13. In the improve step of DMAIC, FMEA form was used to propose some recommendations in order to improve the process, some of that that are provision of lubricant periodically by the operator, polishing on the surface of the liner to clean and clear, examination and maintenance periodically. Keyword : Quality, Six Sigma, DMAIC, Defects.

scholarly journals ANALISIS KECACATAN KEMASAN PRODUK OKKY JELLY DRINK PERISA BLACKCURRANT SEBAGAI UPAYA PERBAIKAN KUALITAS DENGAN METODE DMAIC PADA PT. TRITEGUH MANUNGGAL SEJATI

2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Suharto Suharto ◽  
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Six Sigma ◽  
Cause And Effect ◽  
Sigma Level ◽  
Quality Control Tool ◽  
And Control ◽  
Cause And Effect Diagram ◽  
Control Tool

Abstract This study aims to determine and identify the causes of defects in the production process of PT. Triteguh Manunggal Sejati and know the level of sigma level. This research uses the six sigma method with the DMAIC approach as a quality control tool, which includes the Define, Measure, Analyze, Improve and Control stages. Based on this study the results obtained are the level of sigma level at PT.Triteguh Manunggal Sejati is 4.96, which means that in the stage of sigma level the company has not reached the level of six sigma levels because in the production process at PT.Triteguh Manunggal Sejati still has product defects in the production process not yet achieved zero defect. The causes of product defects are based on cause and effect diagrams namely lid / seal defects are leaky lid, broken lid, and tilted lid. Kata kunci : Defect, Six Sigma, DMAIC, cause and effect diagram

scholarly journals A Case Study of Six Sigma Define-Measure-Analyze-Improve-Control (DMAIC) Methodology in Garment Sector

2017 ◽  
Vol 8 (4) ◽  
pp. 1309 ◽  
Author(s):  
Abdur Rahman ◽  
Salaha Uddin Chowdhury Shaju ◽  
Sharan Kumar Sarkar ◽  
Mohammad Zahed Hashem ◽  
S. M. Kamrul Hasan ◽  
...  
Keyword(s):  
Design Of Experiments ◽  
Analysis Of Variance ◽  
Six Sigma ◽  
Empirical Application ◽  
Sigma Level ◽  
Manufacturing Organization

This paper demonstrates the empirical application of Six Sigma and Define-Measure-Analyze-Improve-Control (DMAIC) methodology to reduce product defects within a garments manufacturing organization in Bangladesh which follows the DMAIC methodology to investigate defects, root causes and provide a solution to eliminate these defects. The analysis from employing Six Sigma and DMAIC indicated that the broken stitch and open seam influenced the number of defective products. Design of experiments (DOE) and the analysis of variance (ANOVA) techniques were combined to statistically determine the correlation of the broken stitch and open seam with defects as well as to define their optimum values needed to eliminate the defects. Thus, a reduction of about 35% in the garments defect was achieved, which helped the organization studied to reduce its defects and thus improve its Sigma level from 1.7 to 3.4.

Sign in / Sign up

Export Citation Format

Share Document