scholarly journals Biaxial flexural strength of different types of monolithic zirconia

2019 ◽  
Vol 22 (1) ◽  
pp. Process
Author(s):  
Shereen Ahmed Nossair ◽  
Tarek Salah ◽  
Kamal Khaled Ebeid
Keyword(s):  
Flexural Strength ◽  
Zirconia Ceramic ◽  
Group 4 ◽  
Dental Esthetics ◽  
Biaxial Flexural Strength ◽  
Different Types ◽  
Monolithic Zirconia ◽  
Group 5 ◽  
Group 2 ◽  
Post Hoc

Objective: This study was designed to evaluate the biaxial flexural strength (BFS) of different types of unshaded and shaded monolithic zirconia. Material and Methods: 120 monolithic zirconia ceramic discs were fabricated. They were divided into twelve groups (n=10), Group 1; Bruxzir unshaded, Group 2; Bruxzir shaded A2, Group 3; Bruxzir anterior white, Group 4; Bruxzir anterior shade A2, Group 5; Prettau unshaded, Group 6; Prettau shaded with A2 coloring liquid, Group 7; Prettau anterior white, Group 8; Prettau anterior shaded with A2 coloring liquid, Group 9; Katana HT white, Group 10; Katana HT shade A2, Group 11; Katana ST white, Group 12; Katana ST shade A2. All discs were milled using a dental milling machine, and had final dimensions after sintering of 15 mm diameter and 1 mm thickness. BFS was tested using piston on three ball technique. Results:  One-way ANOVA revealed significant differences among the 12 groups. Tukey post-hoc tests revealed no significant differences between the groups 3, 4, ,7 ,8 11, and 12. However, they all had BFS values that are significantly lower than all other groups. Group 2 showed statistically significant higher BFS values when compared to group 3,4, 7, 8, 11, and 12 while it showed statistically significant lower values when compared to groups 1, 5, 6, 9, and 10. Conclusion: Increase in the yttria content in zirconia led to a decrease in its BFS. Shading of zirconia did not have a significant effect on the final strength of zirconia. KeywordsDental ceramics; Dental esthetics; Flexural strength; Shaded zirconia. 

Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia

2016 ◽  
Vol 41 (4) ◽  
pp. 417-423 ◽  
Author(s):  
CL Goo ◽  
AUJ Yap ◽  
KBC Tan ◽  
AS Fawzy
Keyword(s):  
Surface Roughness ◽  
Sem Images ◽  
Group 4 ◽  
Diamond Bur ◽  
Before And After ◽  
Monolithic Zirconia ◽  
Polishing Procedures ◽  
Group 5 ◽  
Group 2 ◽  
Post Hoc

SUMMARY This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)—Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)—Shofu zirconia polishing kit; Group 3 (CE)—Ceramiste porcelain polishers; Group 4 (CM)—Ceramaster porcelain polishers; and Group 5 (KZ)—Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (p<0.05). Representative scanning electron microscopy (SEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide–impregnated ones in reducing the surface roughness of ground monolithic zirconia.

scholarly journals Effects of Different Air Particle Abrasion Protocols on the Biaxial Flexural Strength and Fractography of High/Ultra-Translucent Zirconia

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 244
Author(s):  
Reem AlMutairi ◽  
Hend AlNahedh ◽  
Ahmed Maawadh ◽  
Ahmed Elhejazi
Keyword(s):  
Standard Deviation ◽  
Flexural Strength ◽  
Control Sample ◽  
Zirconia Ceramic ◽  
Air Abrasion ◽  
Zirconia Ceramics ◽  
Biaxial Flexural Strength ◽  
Monolithic Zirconia ◽  
The Mean ◽  
Post Hoc

In this study, the biaxial flexural strength (BFS) and fractography of high/ultra-translucent monolithic zirconia ceramics subjected to different mechanical surface pretreatments were evaluated. A total of 108 disc-shaped samples (12 mm diameter, 1.2 mm thickness) of three zirconia materials (5Y-ZP KATANA Zirconia UTML (ML), 3Y-TZP DD Bio ZX2 (DB), and 5Y-ZP DD cube X2 (DC)) were used. The BFS was investigated after subjecting the samples to surface treatment using air abrasion particles of two types (aluminum oxide or glass microbeads). The data were analyzed using two-way analysis of variance, followed by Scheffe’s post hoc test for multiple comparisons. The mean ± standard deviation BFS for DB was highest after treatment with 50 µm Al2O3 (1626.05 ± 31.9 MPa), with lower values being observed following treatment with 50 µm glass microbeads (1399.53 ± 24.2 MPa) and in the control sample (1198.51 ± 21.1 MPa). The mean ± standard deviation (SD) BFSs for DC and ML were the highest in the control groups. Surface air abrasion with 50 µm Al2O3 particles and 2 bar pressure is recommended for 3Y-TZP translucent zirconia, while no abrasion of 5Y-ZP translucent zirconia ceramic.

scholarly journals Exposure of Biomimetic Composite Materials to Acidic Challenges: Influence on Flexural Resistance and Elastic Modulus

Biomimetics ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 56
Author(s):  
Andrea Scribante ◽  
Simone Gallo ◽  
Stefano Scarantino ◽  
Alberto Dagna ◽  
Claudio Poggio ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Composite Materials ◽  
Flexural Strength ◽  
Testing Machine ◽  
Distilled Water ◽  
Group 4 ◽  
Significant Difference ◽  
Group 5 ◽  
Group 2 ◽  
Flexural Resistance

Acidic conditions of the oral cavity, including soft drinks and cariogenic bacteria, represent a damage for restorative biomimetic composite materials. The aim of this study is to assess the influence of two different acidic challenges on the flexural strength and elastic modulus of five composites: x-tra fil (Group 1, XTF), GrandioSO x-tra (Group 2, GXT), Admira Fusion x-tra (Group 3, AFX), VisCalor bulk (Group 4, VCB), and Enamel Plus HRi (Group 5, EPH). Thirty samples for each group were randomly divided and assigned to three different treatments: storage in distilled water as the controls (subgroups 1a–5a), 3 weeks distilled water + 1 week Coca-Cola (subgroups 1b-5b), and 4 weeks Coca-Cola (subgroups 1c–5c). For each subgroup, the flexural strength and elastic modulus were measured using an Instron universal testing machine, and data were submitted to statistical analysis. Considering subgroups B, no material showed a significant difference in the flexural strength with the controls (p > 0.05), whereas for subgroups C, only GXT and VCB showed significantly lower values (p < 0.05). AFX reported the lowest flexural strength among the materials tested. As regards the elastic modulus, no material showed a significant variation after acidic storages when compared with the respective control (p > 0.05). AFX and EPH reported the lowest elastic modulus compared to the other materials. All composites tested showed adequate flexural properties according to the standards, except for AFX. This biomimetic material, along with EPH, might be indicated for V class (cervical) restorations considering the lowest values of elasticity reported.

scholarly journals Biaxial Flexural Strength of Different Monolithic Zirconia upon Post-Sintering Processes

2022 ◽  
Author(s):  
Niwut Juntavee ◽  
Apa Juntavee ◽  
Thipradi Phattharasophachai
Keyword(s):  
Flexural Strength ◽  
Testing Machine ◽  
Sintering Process ◽  
X Ray Diffraction ◽  
Heat Treated ◽  
Biaxial Flexural Strength ◽  
Monolithic Zirconia ◽  
Treatment Procedures ◽  
Post Hoc ◽  
Sintering Processes

Abstract Objective Different post-sintering processes are expected to be a reason for alteration in the strength of zirconia. This study evaluated the effect of post-sintering processes on the flexural strength of different types of monolithic zirconia. Materials and Methods A total of 120 classical- (Cz) and high-translucent (Hz) monolithic zirconia discs (1.2 mm thickness and 14 mm in Ø) were prepared, sintered, and randomly divided into four groups to be surface-treated with (1) as-glazed (AG); (2) finished and polished (FP); (3) finished, polished, and overglazed (FPOG); and (4) finished, polished, and heat-treated (FPHT) technique (n = 15). Biaxial flexural strength (σ) was determined on a piston-on-three ball in a universal testing machine at a speed of 0.5 mm/min. Statistical Analysis Analysis of variance, and post hoc Bonferroni multiple comparisons were determined for significant differences (α = 0.05). Weibull analysis was applied for survival probability, Weibull modulus (m), and characteristic strength (σ0). The microstructures were examined with a scanning electron microscope and X-ray diffraction. Results The mean ± standard deviation value of σ (MPa), m, and σ0 were 1,626.43 ± 184.38, 9.51, and 1,709.79 for CzAG; 1,734.98 ± 136.15, 12.83, and 1,799.17 for CzFP; 1,636.92 ± 130.11, 14.66, and 1,697.63 for CzFPOG; and 1,590.78 ± 161.74, 10.13, and 1,663.82 for CzFPHT; 643.30 ± 118.59, 5.59, and 695.55 for HzAG; 671.52 ± 96.77, 3.28, and 782.61 for HzFP; 556.33 ± 122.85, 4.76, and 607.01 for HzFPOG; and 598.36 ± 57.96, 11.22, and 624.89 for HzFPHT. The σ was significantly affected by the post-sintering process and type of zirconia (p < 0.05), but not by their interactions (p > 0.05). The Cz indicated a significantly higher σ than Hz. The FP process significantly enhanced σ more than other treatment procedures. Conclusion Post-sintering processes enabled an alteration in σ of zirconia. FP enhanced σ, while FPOG and FPHT resulted in a reduction of σ. Glazing tends to induce defects at the glazing interface, while heat treatment induces a phase change to tetragonal, both resulted in reducing σ. Finishing and polishing for both Cz and Hz monolithic zirconia is recommended, while overglazed or heat-treated is not suggested.

scholarly journals The Effect of Translucency and Surface Treatment on the Flexural Strength of Aged Monolithic Zirconia

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Rashin Giti ◽  
Benika Abbasi
Keyword(s):  
Flexural Strength ◽  
Surface Treatment ◽  
Testing Machine ◽  
In Vitro Study ◽  
High Strength ◽  
Airborne Particle ◽  
Different Types ◽  
Monolithic Zirconia ◽  
Post Hoc

Aims. This in vitro study aimed to evaluate the effect of the degrees of translucency in different types of monolithic zirconia as well as the aging and surface treatment with airborne particle abrasion on the flexural strength of monolithic zirconia. Materials and Methods. Sixty bar-shaped specimens were fabricated from three different types of presintered monolithic zirconia (n = 20 per group) including low translucent (LT) (DD Bio ZW iso, high strength zirconia, Dental Direkt, Germany), high translucent (HT) (DD Bio ZX2 98, high translucent zirconia, Dental Direkt, Germany), and multilayered system (ML) (DD cubeX2®ML, multilayer, cubic zirconia system, Dental Direkt, Germany). Each monolithic zirconia group was equally subdivided according to be either air-abraded with 110 µm aluminium oxide particles or left untreated (control). After thermocycling, the flexural strength was measured by using a universal testing machine. Two-way ANOVA followed by Tukey’s post hoc and independent samples t-test were used for the statistical analyses (P < 0.05). Results. Surface treatment and types of zirconia were found to have a significant interaction (P = 0.010). Having controlled the effect of surface treatment, the flexural strength of HT and LT zirconia was found to be significantly higher than the ML zirconia system (P ≤ 0.001). Airborne particle abrasion could significantly decrease the flexural strength of monolithic zirconia only in ML zirconia (P = 0.002). Conclusions. Multilayered zirconia system had the lowest flexural strength among all groups. Moreover, the flexural strength of this system was attenuated by surface treatment with airborne particles abrasion.

Morphological Changes in the Rat Granulosa Cell Surface During Differentiation Induced by Estradiol and Gonadotropins

1977 ◽  
Vol 35 ◽  
pp. 484-485
Author(s):  
P. Bagavandoss ◽  
JoAnne S. Richards ◽  
A. Rees Midgley
Keyword(s):  
Cell Surface ◽  
Granulosa Cell ◽  
Morphological Changes ◽  
Follicular Development ◽  
Female Rats ◽  
Functional Changes ◽  
Group 4 ◽  
Group 3 ◽  
Group 5 ◽  
Group 2

During follicular development in the mammalian ovary, several functional changes occur in the granulosa cells in response to steroid hormones and gonadotropins (1,2). In particular, marked changes in the content of membrane-associated receptors for the gonadotropins have been observed (1).We report here scanning electron microscope observations of morphological changes that occur on the granulosa cell surface in response to the administration of estradiol, human follicle stimulating hormone (hFSH), and human chorionic gonadotropin (hCG).Immature female rats that were hypophysectcmized on day 24 of age were treated in the following manner. Group 1: control groups were injected once a day with 0.1 ml phosphate buffered saline (PBS) for 3 days; group 2: estradiol (1.5 mg/0.2 ml propylene glycol) once a day for 3 days; group 3: estradiol for 3 days followed by 2 days of hFSH (1 μg/0.1 ml) twice daily, group 4: same as in group 3; group 5: same as in group 3 with a final injection of hCG (5 IU/0.1 ml) on the fifth day.

Does Perioperative Hemoglobin A1c Level Affect the Incidence, Pattern and Mortality of Lower Extremity Amputation?

2019 ◽  
Vol 17 (4) ◽  
pp. 354-364
Author(s):  
Hassan Al-Thani ◽  
Moamena El-Matbouly ◽  
Maryam Al-Sulaiti ◽  
Noora Al-Thani ◽  
Mohammad Asim ◽  
...  
Keyword(s):  
Glycemic Control ◽  
Lower Extremity ◽  
Hazard Ratio ◽  
Lower Extremity Amputation ◽  
Group 4 ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Extremity Amputation ◽  
Group 1

Background: We hypothesized that perioperative HbA1c influenced the pattern and outcomes of Lower Extremity Amputation (LEA). Methods: A retrospective analysis was conducted for all patients who underwent LEA between 2000 and 2013. Patients were categorized into 5 groups according to their perioperative HbA1c values [Group 1 (<6.5%), Group 2 (6.5-7.4%), Group 3 (7.5-8.4%), Group 4 (8.5-9.4%) and Group 5 (≥9.5%)]. We identified 848 patients with LEA; perioperative HbA1c levels were available in 547 cases (Group 1: 18.8%, Group 2: 17.7%, Group 3: 15.0%, Group 4: 13.5% and Group 5: 34.9%). Major amputation was performed in 35%, 32%, 22%, 10.8% and 13.6%, respectively. Results: The overall mortality was 36.5%; of that one quarter occurred during the index hospitalization. Mortality was higher in Group 1 (57.4%) compared with Groups 2-5 (46.9%, 38.3%, 36.1% and 31.2%, respectively, p=0.001). Cox regression analysis showed that poor glycemic control (Group 4 and 5) had lower risk of mortality post-LEA [hazard ratio 0.57 (95% CI 0.35-0.93) and hazard ratio 0.46 (95% CI 0.31-0.69)]; this mortality risk persisted even after adjustment for age and sex but was statistically insignificant. The rate of LEA was greater among poor glycemic control patients; however, the mortality was higher among patients with tight control. Conclusion: The effects of HbA1c on the immediate and long-term LEA outcomes and its therapeutic implications need further investigation.

scholarly journals Association between serum oestradiol level on the hCG administration day and neonatal birthweight after IVF-ET among 3659 singleton live births

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yu Liu ◽  
Jing Li ◽  
Wanyu Zhang ◽  
Yihong Guo
Keyword(s):  
Birth Weight ◽  
Ovarian Stimulation ◽  
Group 4 ◽  
Group 6 ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
The Impact ◽  
Ivf Et ◽  
Group 1

AbstractOestradiol, an important hormone in follicular development and endometrial receptivity, is closely related to clinical outcomes of fresh in vitro fertilization-embryo transfer (IVF-ET) cycles. A supraphysiologic E2 level is inevitable during controlled ovarian hyper-stimulation (COH), and its effect on the outcome of IVF-ET is controversial. The aim of this retrospective study is to evaluate the association between elevated serum oestradiol (E2) levels on the day of human chorionic gonadotrophin (hCG) administration and neonatal birthweight after IVF-ET cycles. The data of 3659 infertile patients with fresh IVF-ET cycles were analysed retrospectively between August 2009 and February 2017 in First Hospital of Zhengzhou University. Patients were categorized by serum E2 levels on the day of hCG administration into six groups: group 1 (serum E2 levels ≤ 1000 pg/mL, n = 230), group 2 (serum E2 levels between 1001 and 2000 pg/mL, n = 524), group 3 (serum E2 levels between 2001 and 3000 pg/mL, n = 783), group 4 (serum E2 levels between 3001 and 4000 pg/mL, n = 721), group 5 (serum E2 levels between 4001 and 5000 pg/mL, n = 548 ), and group 6 (serum E2 levels > 5000 pg/mL, n = 852). Univariate linear regression was used to evaluate the independent correlation between each factor and outcome index. Multiple logistic regression was used to adjust for confounding factors. The LBW rates were as follows: 3.0% (group 1), 2.9% (group 2), 1.9% (group 3), 2.9% (group 4), 2.9% (group 5), and 2.0% (group 6) (P = 0.629), respectively. There were no statistically significant differences in the incidences of neonatal LBW among the six groups. We did not detect an association between peak serum E2 level during ovarian stimulation and neonatal birthweight after IVF-ET. The results of this retrospective cohort study showed that serum E2 peak levels during ovarian stimulation were not associated with birth weight during IVF cycles. In addition, no association was found between higher E2 levels and increased LBW risk. Our observations suggest that the hyper-oestrogenic milieu during COS does not seem to have adverse effects on the birthweight of offspring after IVF. Although this study provides some reference, the obstetric-related factors were not included due to historical reasons. The impact of the high estrogen environment during COS on the birth weight of IVF offspring still needs future research.

Timing of melatonin treatment: differential effects on oestrus and coat growth in goats

1997 ◽  
Vol 65 (2) ◽  
pp. 267-273 ◽  
Author(s):  
I. A. Forsyth ◽  
F. E. Gebbie ◽  
J. Arendt
Keyword(s):  
Goat Milk ◽  
Normal Weight ◽  
Ovarian Activity ◽  
Plasma Prolactin ◽  
Dairy Goats ◽  
Group 4 ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Group 1

AbstractTo avoid winter scarcity of fresh goat milk, simple methods of advancing the season of kidding would be commercially valuable. A combination of long-day light treatment followed by melatonin is successful but other aspects of seasonality including coat growth are also reset. To investigate whether effects on breeding season and coat growth can be dissociated, British Saanen dairy goats (no. = 30) were randomly allocated to one of six groups. Control goats were untreated. Goats in the other five groups received 2 months of treatment with 20 h light: 4 h darkness (20L: 4D) and were then given 3 mg melatonin orally at 16.00 hfor 2 months. The treatments started on 11 January (group 1), 29 March (group 2), 14 June (group 3), 30 August (group 4) and 8 November (group 5). Weekly blood samples were taken for the measurement of progesterone to monitor ovarian activity and prolactin. Side patches (10 cm ×10 cm) were clipped monthly from alternate sides and weighed to measure coat growth. The onset of ovarian activity was advanced from a median date of 15 November in controls to 24 May in group 1 (P < 0·01), 16 August in group 2 (P < 0·05) and 18 October in group 3 (? < 0·05). Groups 4 and 5 showed no significant change in the onset of oestrus (median onset dates 8 November and 1 November, respectively). Group 1 goats came into season again with controls in November. In all except group 5, treatment interacted with time to affect significantly the growth of the coat. The pattern of coat growth was most altered (P < 0·001) in groups 1 and 2. This was associated with effects on plasma prolactin concentrations of light stimulation and melatonin suppression. Group 1 goats resynchronized with control goats to show a coat of normal weight in the winter following treatment. Division of milking goat herds into spring and autumn kidding groups is, therefore, a practical possibility, but effects on overall milk yield require study.

Sign in / Sign up

Export Citation Format

Share Document