scholarly journals EFFECTS OF INITIAL MOISTURE CONTENT ON THE PRODUCTION AND QUALITY PROPERTIES OF SOLID BIOFUEL

2015 ◽  
Vol 55 (5) ◽  
pp. 335 ◽  
Author(s):  
Miloš Matúš ◽  
Peter Križan ◽  
Juraj Beniak ◽  
Ľubomír Šooš
Keyword(s):  
Moisture Content ◽  
Room Temperature ◽  
Initial Moisture Content ◽  
Calorific Value ◽  
Quality Properties ◽  
Moisture Expansion ◽  
Solid Biofuel ◽  
Effect Of Moisture ◽  
Physical Changes

The moisture content of densified biomass is a limit parameter influencing the quality of the solid biofuel. It influences its calorific value, density, mechanical strength and dimensional stability as well as the production process of this biofuel. The paper deals with the experimental research of the effect of moisture content of densified material on the final quality of biofuel in the form of logs. Experiments based on the single-axis densification of spruce sawdust were realized by hydraulic piston press, where the densified logs were produced under room temperature. The effect of moisture content on the quality properties of the logs, including density, change of moisture, expansion and physical changes, were studied. The results show the necessary moisture ranges for producing good-quality logs. The experiments were evaluated and the moisture content of the tested material was optimized to achieve the optimum value for the best quality of the solid biofuel.

Autothermal biodrying of municipal solid waste with high moisture content

2010 ◽  
Vol 64 (2) ◽  
Author(s):  
Agnieszka Zawadzka ◽  
Liliana Krzystek ◽  
Stanisław Ledakowicz
Keyword(s):  
Moisture Content ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Energy Content ◽  
Plastic Material ◽  
Initial Moisture Content ◽  
Tubular Reactor ◽  
Calorific Value ◽  
High Energy ◽  
Total Capacity

AbstractTo carry out autothermal drying processes during the composting of biomass, a horizontal tubular reactor was designed and tested. A biodrying tunnel of the total capacity of 240 dm3 was made of plastic material and insulated with polyurethane foam to prevent heat losses. Municipal solid waste and structural plant material were used as the input substrate. As a result of autothermal drying processes, moisture content decreased by 50 % of the initial moisture content of organic waste of about 800 g kg−1. In the tested cycles, high temperatures of biodried waste mass were achieved (54–56°C). An appropriate quantity of air was supplied to maintain a satisfactory level of temperature and moisture removal in the biodried mass and high energy content in the final product. The heat of combustion of dried waste and its calorific value were determined in a calorimeter. Examinations of pyrolysis and gasification of dried waste confirmed their usefulness as biofuel of satisfactory energy content.

scholarly journals The quality properties, thiobarbituric acid (TBA) values and microstructure of chicken sausage with local red beetroot powder

Food Research ◽  
2021 ◽  
Vol 5 (S2) ◽  
pp. 113-119
Author(s):  
W. Swastike ◽  
E. Suryanto ◽  
Rusman ◽  
C. Hanim ◽  
Jamhari ◽  
...  
Keyword(s):  
Peroxide Value ◽  
Room Temperature ◽  
Thiobarbituric Acid ◽  
Quality Properties ◽  
Randomized Design ◽  
Powder Addition ◽  
Completely Randomized Design ◽  
Different Levels ◽  
Temperature Storage

This research was aimed to determine the quality properties, the microstructure of chicken sausage and Thiobarbituric acid (TBA) values with locally Indonesia red beetroot powder. The main ingredients of chicken sausage-making in this research were broiler chicken, filler, binder, beetroot powder, and spices. Red beetroot powder function as a filler was substituted tapioca starch in chicken sausage batter in three different levels. The combination of red beetroot powder with level 0, 1.0, 2.0 and 3.0% of total batter and shelf life at room temperature for 0, 1, 2 and 3 days. Each treatment consisted of five replications. The variables observed using quality properties (moisture, ash, fat, protein, crude fiber and calorie), microstructure and peroxide value of chicken sausage. The data of quality properties and peroxide value were analyzed by using one-way analysis (ANOVA) of Completely Randomized Design. The differences between means were analyzed by Duncan's New Multiple Ranges Test. The data of microstructure was analyzed by descriptive analyses. The moisture, protein, fat and ash contents for chicken sausages were significantly different (p<0.05). The chicken sausage with 2% substitution of beet powder produced chicken sausages with a high protein content of 14.77±0.02% while a low-fat content is 0.42±0.01%. Thiobarbituric acid (TBA) values of chicken sausages increased throughout the three days of room temperature storage (38°C). Chicken sausage formulated with red beetroot powder showed a significantly lower TBA value compared to the samples without red beetroot powder (p<0.05). In conclusion, a higher level of beetroot powder will improve the quality of chicken sausage and also the microstructure. The best level of beetroot powder addition was 2.0%. The addition of beetroot powder able to maintain fresh sausage conditions up to 2 days of storage at room temperature.

scholarly journals Analysis of the Quality of Mixed Coconut Shell Waste Briquettes with Various Biomass Additives as Alternative Fuels

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Yusraida Khairani Dalimunthe ◽  
Sugiatmo Kasmungin ◽  
Listiana Satiawati ◽  
Thariq Madani ◽  
Teuku Ananda Rizky
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Coconut Shell ◽  
Bamboo Charcoal ◽  
A Value ◽  
Shell Waste

The purpose of this study was to see the best quality of briquettes from the main ingredient of coconut shell waste<br />with various biomass additives to see the calorific value, moisture content, ash content, and volatile matter<br />content of the biomass mixture. Furthermore, further research will be carried out specifically to see the quality of<br />briquettes from a mixture of coconut shell waste and sawdust. The method used in this research is to conduct a<br />literature study of various literature related to briquettes from coconut shell waste mixed with various additives<br />specifically and then look at the best quality briquettes produced from these various pieces of literature. As for<br />what is determined as the control variable of this study is coconut shell waste and as an independent variable,<br />namely coffee skin waste, rice husks, water hyacinth, Bintaro fruit, segon wood sawdust, coconut husk, durian<br />skin, bamboo charcoal, areca nut skin, and leather waste. sago with a certain composition. Furthermore, this<br />paper also describes the stages of making briquettes from coconut shell waste and sawdust for further testing of<br />the calorific value, moisture content, ash content, volatile matter content on a laboratory scale for further<br />research. From various literatures, it was found that the highest calorific value was obtained from a mixture of<br />coconut shell waste and bamboo charcoal with a value of 7110.7288 cal / gr and the lowest calorific value was<br />obtained from a mixture of coconut shell waste and sago shell waste with a value of 114 cal / gr, then for the value<br />The highest water content was obtained from a mixture of coconut shell waste and rice husk with a value of<br />37.70% and the lowest water content value was obtained from a mixture of coconut shell waste 3.80%, then for the<br />highest ash content value was obtained from a mixture of coconut shell waste and coffee skin with a value of<br />20.862% and for the lowest ash content value obtained from a mixture of coconut shell and Bintaro fruit waste,<br />namely 2%, and for the highest volatile matter content value obtained from a mixture of coconut shell and coconut<br />husk waste with a value of 33.45% and for the value of volatile matter levels The lowest was obtained from a<br />mixture of coconut shell waste and sago skin waste with a value of 33 , 45%.

DRIED WHOLE EGG POWDER: XXIII. THE EFFECT OF MOISTURE CONTENT AND METHOD OF PACKING ON THE STORAGE LIFE OF DRIED SUGAR–EGG MIXTURES

1946 ◽  
Vol 24f (6) ◽  
pp. 430-436
Author(s):  
R. L. Hay ◽  
Jesse A. Pearce
Keyword(s):  
Carbon Dioxide ◽  
Moisture Content ◽  
Beneficial Effect ◽  
Potassium Chloride ◽  
Storage Life ◽  
High Moisture ◽  
Effect Of Moisture ◽  
Egg Powder ◽  
Whole Egg

Dried sugar–egg powders, obtained from a commercial Canadian source, were adjusted to 1.4, 2.8, and 3.2% moisture and stored at 40°, 80°, and 120° F. from 1 to 52 weeks. Quality of the powder was assessed by measurement of fluorescence, potassium chloride value, pH, and foaming volume. The rate of deterioration increased with an increase in moisture content at 80° and 120° F. The effect of moisture content on fluorescence and potassium chloride values was negligible at 40° F., but high moisture in powders stored at this temperature accelerated the development of acidity and the loss in baking quality as assessed by foaming volume.Packing in carbon dioxide, nitrogen, and in vacuo had a slight beneficial effect on dried sugar–egg powder.

Evaluation of the Effect of Moisture Content in the Wood Sample Structure on the Quality of Tomographic X-Ray Studies of Tree Rings of Stem Wood

2019 ◽  
Vol 46 (1) ◽  
pp. 16-18
Author(s):  
A. V. Batranin ◽  
S. L. Bondarenko ◽  
M. A. Kazaryan ◽  
A. A. Krasnykh ◽  
I. A. Miloichikova ◽  
...  
Keyword(s):  
Moisture Content ◽  
Tree Rings ◽  
Wood Sample ◽  
X Ray ◽  
Stem Wood ◽  
Sample Structure ◽  
Effect Of Moisture

High Quality Solid Biofuel Briquette Production From Palm Oil Milling Solid Wastes

2009 ◽  
Author(s):  
Abd Halim Shamsuddin ◽  
Mohd Shahir Liew
Keyword(s):  
Moisture Content ◽  
Palm Oil ◽  
Palm Kernel ◽  
Calorific Value ◽  
Solid Wastes ◽  
Biomass Fuels ◽  
High Quality ◽  
Palm Kernel Shell ◽  
Empty Fruit Bunches ◽  
Solid Biofuel

Malaysia has about 4.2 million hectares of oil palm plantation. The palm oil milling industry has over 400 mills throughout the country with total milling capacity of 82 million tonnes fresh fruit bunches, FFB, per year. In 2003, the amount of FFB processed was 67 million tonnes, which generated solid wastes in the forms of empty fruit bunches, EFB (19.43 million tonnes), mesocarp fibres (12.07 million tonnes) and palm kernel shell (4.89 million tonnes). These wastes has moisture content of 60–70% for EFB and mesocarp fibre, and 34–40% for palm kernel shell, and calorific value of 5.0 – 18.0 Mj/kg. A processing technology was developed to process these low quality biomass fuels into high quality solid biofuel briquettes with moisture content in the range 8–12%. Depending on the formulations and the sources of the raw biomass, the final solid biofuel briquettes can have calorific values in the range of 18–25 Mj/kg. The production of the solid biofuel briquettes would be an attractive financial advantage for full exploitation of biomass fuels. Logistic problems due to the disperse nature of the biomass resources would significantly be addressed.

scholarly journals Quality Analysis of Briquettes based on Waterding with Variation of Pressure and Pellet Geometry to Water Content and Value of Calories

2020 ◽  
Vol 8 (2) ◽  
pp. 55
Author(s):  
Lintang Pratama ◽  
Dwi Pangga ◽  
Dwi Sabda Budi Prasetya
Keyword(s):  
Moisture Content ◽  
Water Hyacinth ◽  
Calorific Value ◽  
Quality Analysis ◽  
Test Results ◽  
Heating Value ◽  
Tapioca Starch ◽  
Quality Of Water ◽  
Value Range

This study is a research on water hyacinth-based briquettes which shows the calorific value of each form of briquettes. The purpose of this study was to analyze the quality of water hyacinth briquettes with variations in pressure and pellet geometry. The quality analyzed includes moisture content and calorific value. The method of making briquettes starts from charcoal, pounding, then mixing with tapioca starch adhesive. The composition of the mixture used is 90% water hyacinth charcoal with 10% tapioca starch adhesive. 4 geometric variations are used, namely, solid box, hollow box, solid tube and hollow tube with 3 pressure variations, namely, 10 PSI, 20 PSI and 30 PSI. Test results and analysis,briquettes at a pressure of 20 PSI produces a calorific value range of 91.15 - 150.14 cal / gram. The resulting calorific value is higher than the briquettes at a pressure of 10 PSI and 30 PSI with a heating value range of 93.84 - 148.79 cal / gram and 89.81 - 135.39 cal / gram. Hollow briquettes produce a calorific value range of 107.24 - 150.14 cal / gram higher than solid geometric briquettes which produce a heating value range of 89.81 - 148.79 cal / gram. So that the contribution of the results of this research is that the community makes briquettes with shape and pressure with good results shown in this study.

scholarly journals Development and performance evaluation of a solar tunnel date dryer in Oman

2012 ◽  
Vol 17 ◽  
pp. 21
Author(s):  
Mohammad Ali Basunia ◽  
Hamid H. Al-Handali ◽  
Mohammed Issa Al-Belushi ◽  
Mohammad Shafiur Rahman ◽  
Osman Maghoub
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Average Moisture Content ◽  
Air Velocity ◽  
Sun Drying ◽  
Tunnel Dryer ◽  
Moisture Content Level ◽  
Collector Region ◽  
And Performance

Taking into consideration the date harvesting and landholding capacities of the marginalized rural farmers in Oman, a 12 meter long and 2 meter wide tunnel was designed and constructed to dry about 180-200 kg of freshly harvested dates per batch. Half of the tunnel base was used as a flat plate air heating solar collector and the other half as a dryer. The drying air was forced from the collector region (South side) to the drying region (North side) of the half circled tunnel where the product is to be dried. The drying temperature could be easily raised by some 5-30 oC above the ambient temperature inside the tunnel at an air velocity of approximately 0.5 m/sec. The test was conducted with 190.2 kg freshly harvested dates with initial moisture content of 32.8% (wet-basis) to analyze the performance of the dryer. The dates were dried to a final average moisture content of 18.6% (wet-basis) within two days (20 hours). The results indicated that the drying was faster in a solar tunnel dryer than the natural open air sun drying. It was possible to reach the moisture content level for safe storage within less than two days (20 hrs) with a solar tunnel dryer and 5-7 days in open air natural sun drying. The improvement in the quality of dates in terms of color and brightness was distinctly recognized. 

scholarly journals Temporal variation in seed quality of Indian spinach preserved in different containers

2016 ◽  
Vol 5 (2) ◽  
pp. 51-57 ◽  
Author(s):  
M Kamruzzaman ◽  
S Khatun ◽  
A Rakib ◽  
MI Hoque ◽  
MH Rani
Keyword(s):  
Moisture Content ◽  
Seed Quality ◽  
Initial Moisture Content ◽  
Dry Weight ◽  
Germination Percentage ◽  
Seedling Vigor ◽  
Fresh Weight ◽  
Seed Technology ◽  
Vigor Index

The experiment was conducted to investigate the seed quality of Indian spinach for three months stored at different containers (Plastic pot, polythene bag and cloth bag) during 2013-2014 at Seed Technology Laboratory of Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU), Gazipur. The initial moisture content of the seed was 9.89% with 75.00% germination. However, after two months, the seed had a different range of increased moisture content with reduced germination percentage depending upon the packing materials. Among the three containers, seeds stored at cloth bag absorbed more moisture (14.36%) from surrounding atmosphere followed by the moisture content, 12.67% and 11.50% of polythene bag and airtight plastic pot, respectively. Seeds stored at plastic pot, polythene bag and cloth bag exhibited 65.00, 64.00 and 50.00 per cent germination, respectively. Similarly, the fresh weight and dry weight of seedling and seedling vigor were also decreased. The seeds of plastic pot were good in term of germination capacity, fresh and dry weight and vigor index in comparison to those stored at cloth bag and polythene bag.Int. J. Agril. Res. Innov. & Tech. 5 (2): 51-57, December, 2015

Sign in / Sign up

Export Citation Format

Share Document