scholarly journals EVALUATION OF RAILWAY BALLAST LAYER CONSOLIDATION AFTER MAINTENANCE WORKS

2019 ◽  
Vol 59 (1) ◽  
pp. 77-87 ◽  
Author(s):  
Mykola Sysyn ◽  
Olga Nabochenko ◽  
Vitalii Kovalchuk ◽  
Ulf Gerber
Keyword(s):  
Statistical Analysis ◽  
Dynamic Analysis ◽  
Impulse Response ◽  
Complex Dynamic ◽  
Railway Ballast ◽  
Seismic Method ◽  
Automated Evaluation ◽  
Dynamic Interpretation ◽  
Different Types ◽  
Degree Of Consolidation

The results of the study of the ballast layer consolidation after the work of ballast-tamping machines of different types are given in the article. The existing methods of determining the degree of consolidation of the ballast layer are analysed. The seismic method was improved by means of a complex dynamic and kinematic interpretation of the impulse response. For the dynamic interpretation with the use of statistical analysis, the features are selected so that they correspond to the degree of consolidation of the ballast layer. On the basis of researches, a device and software were developed that allow an automated evaluation of the ballast layer consolidation based on the kinematic and dynamic analysis of the measured impulse response. The measurements of the degree of the ballast layer consolidation after an operation of ballast-consolidation machines in different sequences allowed establishing the efficiency of the consolidation and the feasibility of the machines’ application.

scholarly journals Potential Effects of Human Papillomavirus Type Substitution, Superinfection Exclusion and Latency on the Efficacy of the Current L1 Prophylactic Vaccines

Viruses ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 22
Author(s):  
Ian N. Hampson ◽  
Anthony W. Oliver ◽  
Lynne Hampson
Keyword(s):  
Life Cycle ◽  
High Risk ◽  
Outcome Data ◽  
Benign Lesions ◽  
Complex Dynamic ◽  
Papilloma Virus ◽  
Superinfection Exclusion ◽  
Different Types ◽  
Hpv Types ◽  
Type Substitution

There are >200 different types of human papilloma virus (HPV) of which >51 infect genital epithelium, with ~14 of these classed as high-risk being more commonly associated with cervical cancer. During development of the disease, high-risk types have an increased tendency to develop a truncated non-replicative life cycle, whereas low-risk, non-cancer-associated HPV types are either asymptomatic or cause benign lesions completing their full replicative life cycle. HPVs can also be present as non-replicative so-called “latent” infections and they can also show superinfection exclusion, where cells with pre-existing infections with one type cannot be infected with a different HPV type. Thus, the HPV repertoire and replication status present in an individual can form a complex dynamic meta-community which changes with respect to both time and exposure to different HPV types. In light of these considerations, it is not clear how current prophylactic HPV vaccines will affect this system and the potential for iatrogenic outcomes is discussed in light of recent outcome data.

Modeling a multi-layered blockchain framework for digital services that governments can implement

2021 ◽  
pp. 1-13
Author(s):  
Fernando Rebollar ◽  
Rocío Aldeco-Perez ◽  
Marco A. Ramos
Keyword(s):  
Statistical Analysis ◽  
General Population ◽  
Information Security ◽  
High Rate ◽  
The Internet ◽  
Sufficient Information ◽  
Electronic Network ◽  
Digital Services ◽  
Different Types ◽  
Cryptographic Techniques

The general population increasingly uses digital services, meaning services which are delivered over the internet or an electronic network, and events such as pandemics have accelerated the need of using new digital services. Governments have also increased their number of digital services, however, these digital services still lack of sufficient information security, particularly integrity. Blockchain uses cryptographic techniques that allow decentralization and increase the integrity of the information it handles, but it still has disadvantages in terms of efficiency, making it incapable of implementing some digital services where a high rate of transactions are required. In order to increase its efficient, a multi-layer proposal based on blockchain is presented. It has four layers, where each layer specializes in a different type of information and uses properties of public blockchain and private blockchain. An statistical analysis is performed and the proposal is modeled showing that it maintains and even increases the integrity of the information while preserving the efficiency of transactions. Besides, the proposal can be flexible and adapt to different types of digital services. It also considers that voluntary nodes participate in the decentralization of information making it more secure, verifiable, transparent and reliable.

Who Wins and Who Loses in the Provincial Courts of Appeal? A Statistical Analysis, 1920–1990

1994 ◽  
Vol 9 (2) ◽  
pp. 21-40 ◽  
Author(s):  
Peter McCormick
Keyword(s):  
United States ◽  
Statistical Analysis ◽  
Great Britain ◽  
Data Base ◽  
The United States ◽  
Different Types ◽  
Party Capability ◽  
Time Periods ◽  
Appeal Courts ◽  
Different Levels

AbstractGiven the visibility and obvious importance of judicial power in the age of the Charter, it is important to develop the conceptual vocabulary for desribing and assessing this power. One such concept that has been applied to the study of appeal courts in the United States and Great Britain is “party capability”, a theory which suggests that different types of litigant will enjoy different levels of success as both appellant and respondent. Using a data base derived from the reported decisions of the provincial courts of appeal for the second and seventh year of each decade since the 1920s, this article applies party capability theory to the performance of the highest courts of the ten provinces; comparisons are attempted across regions and across time periods, as well as with the findings of similar studies of American and British courts.

scholarly journals The Biosphere Reserves of Spain during 2008-2014: Implementation and Key Aspects for its Management

2019 ◽  
Vol 16 (83) ◽  
Author(s):  
Paula Andrea Castaño-Quintero ◽  
María Victoria Gil-Cerezo ◽  
Carmen Galán Soldevilla ◽  
Eugenio Domínguez-Vilches
Keyword(s):  
Statistical Analysis ◽  
Monitoring Programme ◽  
Second Phase ◽  
Biosphere Reserves ◽  
Degree Of Consolidation ◽  
Two Phases ◽  
Key Aspects

The Spanish Network of Biosphere Reserves (SNBR) has a monitoring programme enabling its degree of consolidation to be ascertained, as well as the levels of implementation and territorial assimilation of the Biosphere Reserves that it comprises. The statistical analysis carried out on the results of the SNBR implementation indicators for the period 2008–2014 stand out three fundamental aspects: i) two phases of implementation, ii) the improvements in the indicator scores in the second phase, and iii) the influence of the indicators on the levels of implementation achieved. Some key aspects are noted that could contribute to the enhancement of the implementation of these reserves.

scholarly journals Uncertainties in complex dynamic environments

2014 ◽  
Vol Volume 2 ◽  
Author(s):  
Hasmik Atoyan ◽  
Jean-Marc Robert ◽  
Jean-Rémi Duquet
Keyword(s):  
Decision Making ◽  
Decision Support ◽  
User Interfaces ◽  
Dynamic Environments ◽  
Decision Making Process ◽  
Uncertain Information ◽  
Complex Environments ◽  
Complex Dynamic ◽  
Different Types ◽  
Machine Systems

The utilization of Decision Support Systems (DSS) in complex dynamic environments leads the human operator almost inevitably to having to face several types of uncertainties. Thus it is essential for system designers to clearly understand the different types of uncertainties that could exist in human-machine systems of complex environments, to know their impacts on the operator's trust in the systems and decision-making process, and to have guidelines on how to present uncertain information on user interfaces. It is also essential for them to have an overview of the different stages, levels, and types of system automation, and to know their possible impacts on the creation of different types of uncertainties. This paper investigates these topics and aim at helping researchers and practitioners to deal with uncertainties in complex environments.

Comparative Cellular Localization of Sugar Residues in Bull (Bos taurus) and Donkey (Equus asinus) Testes Using Lectin Histochemistry

2021 ◽  
pp. 1-10
Author(s):  
Mahmoud S. Gewaily ◽  
Mohamed Kassab ◽  
Asmaa Aboelnour ◽  
Essam A. Almadaly ◽  
Ahmed E. Noreldin
Keyword(s):  
Statistical Analysis ◽  
Odds Ratio ◽  
Cellular Localization ◽  
Bos Taurus ◽  
Lectin Histochemistry ◽  
Cell Type ◽  
Equus Asinus ◽  
Different Types ◽  
Cellular Components

Lectins are glycoproteins of a non-immune origin often used as histochemical reagents to study the distribution of glycoconjugates in different types of tissues. In this study, we performed a comparative cellular localization of sugar residues in bull and donkey testes using immunofluorescent lectin histochemistry. We inspected the cellular localization of the glycoconjugates within the testes using 11 biotin-labeled lectins (LCA, ConA, PNA, WGA, DBA, SBA, ECA, BPL, PTL-II, UEA-1, and PHA-E4) classified under six groups. Although the basic testicular structure in both species was similar, the cellular components showed different lectin localization patterns. The statistical analysis revealed no significant association between the intensity of labeling and different variables, including group and type of lectin and type of cell examined, at p < 0.05. However, a stronger response tended to occur in the donkey than in the bull testes (odds ratio: 1.3). These findings may be associated with the different cellular compositions of the glycoproteins and modification changes during spermatogenesis. Moreover, glycoconjugate profiling through lectin histochemistry can characterize some cell-type selective markers that will be helpful in studying bull and donkey spermatogenesis.

The three-dimensional impulse response of a boundary layer to different types of wall excitation

2018 ◽  
Vol 30 (12) ◽  
pp. 124103 ◽  
Author(s):  
Prasannabalaji Sundaram ◽  
Tapan K. Sengupta ◽  
Swagata Bhaumik
Keyword(s):  
Boundary Layer ◽  
Impulse Response ◽  
Three Dimensional ◽  
Different Types

Dynamic Analysis of the Structure of Automobile Components, Obtained by Powder Metallurgy

2020 ◽  
Vol 896 ◽  
pp. 119-126
Author(s):  
Anca Didu ◽  
Nicolae Dumitru ◽  
Cristina Ileana Pascu ◽  
Violeta Cristina Contoloru
Keyword(s):  
Dynamic Analysis ◽  
Dynamic Models ◽  
Combustion Engine ◽  
Practical Interest ◽  
Wide Field ◽  
Connecting Rod ◽  
Time Frequency ◽  
Different Types ◽  
Automobile Components

The analysis of the dynamic behavior of parts from the structure of the cationing mechanism of an internal combustion engine in 4 steps is followed. Thus, kinetic and dynamic models were developed for the motor mechanism considered as an assembly consisting of crankshaft, connecting rods, bearings and pistons. Dynamic models were built mainly in the Ansys program, based on the finite element method. The following problems were addressed, namely the dynamic analysis, with the determination of the response in time for displacements, stresses and deformations and also the vibration analysis in order to analyze the frequency response for the kinematic parameters of the whole system, but also of the component elements. Dynamic models for the numerical processing of the two types of analyzes were designed in a parameterized system with multiple possibilities of working on different time, frequency or different types of loadings and connection conditions. The purpose of this paper is to study the dynamic response of the main elements of the mechanism, for different types of materials. Given the wide field of applicability in automobiles, the technology for obtaining parts from sintered powders, the studies were realized for the cases when the connecting rod and the bearings are made of metallic powders, respectively of steel, to be extended for more complex cases, when we consider the influence of lubricant and temperature distribution in areas of practical interest.

Sign in / Sign up

Export Citation Format

Share Document