scholarly journals Effect of Silicon Carbide on the Mechanical and Thermal Properties of Snake Grass/Sisal Fiber Reinforced Hybrid Epoxy Composites

2021 ◽  
Vol 24 (2) ◽  
pp. 120-128
Author(s):  
M Vijayakumar ◽  
K Kumaresan ◽  
R Gopal ◽  
S D Vetrivel ◽  
V Vijayan
Keyword(s):  
Silicon Carbide ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Epoxy Composites ◽  
Sisal Fiber ◽  
Mechanical And Thermal Properties ◽  
Potential Candidate ◽  
Compression Moulding ◽  
Energy Devices ◽  
Percentage Of Water Absorption

In this study, an attempt was made to develop and characterize Snake Grass Fiber (SGF)/Silicon Carbide (SiC)/epoxy and Snake Grass Fiber/Sisal Fiber (SF)/Silicon Carbide/epoxy hybrid composites using a compression moulding technique. Mechanical characteristics of the produced hybrid composites such as tensile, flexural, and hardness tests were analyzed. Also experiments have been carried out to predict the thermal stability of the fabricated composite samples. The interface between fiber and matrix was examined by using Scanning Electron Microscopy (SEM). Among SGF/SiC/epoxy and SGF/SF/SiC/epoxy composites, it has been observed that hybrid composite SGF/SF/SiC/epoxy exhibits the higher hardness of 82 Shore-D, tensile strength of 51 MPa and flexural strength of 73 MPa. In contrast to the mechanical properties, the percentage of water absorption was lower in the SGF/SiC/epoxy hybrid composite. It is proven from the results that the SGF/SF/SiC/epoxy hybrid composites will enhance the strength of the composites. This composite material is also a potential candidate for the hardware of energy devices including electrochemical energy along with Fuel Cell systems.

Behavior of epoxy reinforced banana glass fiber hybrid composite with nanoclay interference

2021 ◽  
pp. 095440622110357
Author(s):  
Sudhagar M ◽  
Kannan TK ◽  
Benjamin Lazarus S ◽  
Rajasekar R ◽  
Sachin S Raj
Keyword(s):  
Glass Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Wear Behavior ◽  
Hybrid Nanocomposites ◽  
Compression Moulding ◽  
Banana Fiber ◽  
Optimum Result ◽  
Character Study ◽  
Novel Material

Recent years, Polymer matrix hybrid composites have a greater attention in industry and research due to growing demand for versatile applications. The present work focused on the development of epoxy based hybrid nanocomposites. Nanoclay is another novel material that is widely used in the research. In this investigation, nanoclay dispersed hybrid composite materials has been studied for mechanical and wear behavior. Glass fiber and banana fiber combined epoxy laminates (EGB) were reinforced with nanoclay at different weight fractions of 2%, 4%, 6%, and 8% using compression moulding. The enhanced properties of the nanoclay hybrid composites were analyzed with other specimens. Water absorption character study was also conducted. Morphological study was performed using Scanning Electron Microscope. It was observed that an optimum result attained with 4 wt% nanoclay reinforced composite with an increase in tensile strength of 8.62%, flexural strength of 30.19%, and impact strength of 48.15% when compared to EGB. Further the wear resistance of 4 wt% nanoclay hybrid composite showed an increase of 19.4% than the EGB composite.

scholarly journals Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1501 ◽  
Author(s):  
Soundhar Arumugam ◽  
Jayakrishna Kandasamy ◽  
Ain Umaira Md Shah ◽  
Mohamed Thariq Hameed Sultan ◽  
Syafiqah Nur Azrie Safri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Bone Fracture ◽  
Hybrid Composite ◽  
Bone Structure ◽  
Hybrid Composites ◽  
Sisal Fiber ◽  
Composite Scaffolds ◽  
Study Results

This study aims to explore the mechanical properties of hybrid glass fiber (GF)/sisal fiber (SF)/chitosan (CTS) composite material for orthopedic long bone plate applications. The GF/SF/CTS hybrid composite possesses a unique sandwich structure and comprises GF/CTS/epoxy as the external layers and SF/CTS/epoxy as the inner layers. The composite plate resembles the human bone structure (spongy internal cancellous matrix and rigid external cortical). The mechanical properties of the prepared hybrid sandwich composites samples were evaluated using tensile, flexural, micro hardness, and compression tests. The scanning electron microscopic (SEM) images were studied to analyze the failure mechanism of these composite samples. Besides, contact angle (CA) and water absorption tests were conducted using the sessile drop method to examine the wettability properties of the SF/CTS/epoxy and GF/SF/CTS/epoxy composites. Additionally, the porosity of the GF/SF/CTS composite scaffold samples were determined by using the ethanol infiltration method. The mechanical test results show that the GF/SF/CTS hybrid composites exhibit the bending strength of 343 MPa, ultimate tensile strength of 146 MPa, and compressive strength of 380 MPa with higher Young’s modulus in the bending tests (21.56 GPa) compared to the tensile (6646 MPa) and compressive modulus (2046 MPa). Wettability study results reveal that the GF/SF/CTS composite scaffolds were hydrophobic (CA = 92.41° ± 1.71°) with less water absorption of 3.436% compared to the SF/CTS composites (6.953%). The SF/CTS composites show a hydrophilic character (CA = 54.28° ± 3.06°). The experimental tests prove that the GF/SF/CTS hybrid composite can be used for orthopedic bone fracture plate applications in future.

Dry Sliding Friction and Wear Behaviour of Reinforced Hybrid Composites of Uniaxial Glass Fiber with Silicon Carbide, Aluminium Oxide and Graphite

2016 ◽  
Vol 852 ◽  
pp. 411-415
Author(s):  
T. Narendiranath Babu ◽  
Prasham Jain ◽  
Bipin Kumar Sharma
Keyword(s):  
Silicon Carbide ◽  
Glass Fiber ◽  
Glass Fibre ◽  
Hybrid Composite ◽  
Friction And Wear ◽  
Hybrid Composites ◽  
Aluminium Oxide ◽  
Wear Behaviour ◽  
Dry Sliding ◽  
Pin On Disc

In recent years, both industrial and academic world are focussing their attention towards the development of sustainable composites, reinforced with fibres. In particular, among the fibres that can be used as reinforcement, the uniaxial glass fiber ones represent the most interesting for their properties. The aim of this work is to illustrate the results of friction and wear behaviour of uniaxial glass fibers with silicon carbide, aluminium oxide and graphite as the fillers. Moreover, its main manufacturing technologies have been described. The major component of these hybrid composite is uniaxial glass fibre with Epoxy LY556 (Resin). Hardener HY951 is used for hardening and support. Resin + Hardener are mixed in the ratio 10:1 and the mixture made up is called Matrix. Test materials of glass Fibre with varying compositions of 15% Al2O3 + SiC and glass fibre with varying compositions of 15% Graphite + SiC have been prepared by applying the matrix on glass cloth which is wrapped around the mandrel. The samples were tested in a pin-on-disc machine to determine the friction and wear losses. Further, the samples were tested on a pin-on-disc machine and frictional characteristics were monitored by varying speed and loads. Thus, the friction and wear characteristics have also been found out for the two specimens. From the experimental test results, it is observed that Al2O3 +Sic exihibits lower wear loss than SiC + Graphite under dry sliding conditions. Based on the observations, this hybrid composite are recommended to the manufacturing of the aircraft structures.

scholarly journals Optimization of Sisal Fiber, Glass Fiber and Alumina- Based Hybrid Composite for Flexural Strength Using Taguchi Technique

2021 ◽  
Vol 9 (10) ◽  
pp. 474-483
Author(s):  
Veenapani R
Keyword(s):  
Flexural Strength ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
The Other ◽  
Synthetic Fiber ◽  
Sisal Fiber ◽  
Taguchi Technique ◽  
Fiber Glass ◽  
Main Effect

Abstract: In the current study, flexural strength of combination of natural and synthetic fiber with particle filled hybrid composites have been studied. The flexural strength of the hybrid composite mainly depends on the proportion of the sisal fiber weight, glass fiber weight and alumina weight. Taguchi technique has been applied to find the optimized parameters of the developed hybrid composites. Results were obtained for the L9 orthogonal combination from experimentation. The results were analysed with the help of Signal/Noise (S/N) Ratio, Main effect plot and Analysis of variance (ANOVA) using Mini Tab 19. Regression equation are developed for all three reinforcements separately. From the current study it was observed that the flexural strength of the hybrid composite mainly depends on the sisal fiber precent that the other two reinforcements. Based on the experimental observations the maximum ultimate flexural strength was found to be 145.97 MPa for optimised input parameters as 20% of sisal fiber, 20% of glass fiber and 2% of alumina. Keywords: Taguchi technique, ANOVA, Flexural strength, Sisal fiber, Glass Fiber, Alumina

scholarly journals Effect of fiber content and their hybridization on bending and torsional strength of hybrid epoxy composites reinforced with carbon and sugar palm fibers

Polimery ◽  
2021 ◽  
Vol 66 (1) ◽  
pp. 36-43 ◽  
Author(s):  
N. M. Z. Nik Baihaqi ◽  
A. Khalina ◽  
N. Mohd Nurazzi ◽  
H. A. Aisyah ◽  
S. M. Sapuan ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Torsion Test ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
The Matrix ◽  
Carbon Fiber Reinforced Composites ◽  
Carbon Fiber Reinforced

This study aims to investigate the effect of fiber hybridization of sugar palm yarn fiber with carbon fiber reinforced epoxy composites. In this work, sugar palm yarn composites were reinforced with epoxy at varying fiber loads of 5, 10, 15, and 20 wt % using the hand lay-up process. The hybrid composites were fabricated from two types of fabric: sugar palm yarn of 250 tex and carbon fiber as the reinforcements, and epoxy resin as the matrix. The ratios of 85 : 15 and 80 : 20 were selected for the ratio between the matrix and reinforcement in the hybrid composite. The ratios of 50 : 50 and 60 : 40 were selected for the ratio between sugar palm yarn and carbon fiber. The mechanical properties of the composites were characterized according to the flexural test (ASTM D790) and torsion test (ASTM D5279). It was found that the increasing flexural and torsion properties of the non-hybrid composite at fiber loading of 15 wt % were 7.40% and 75.61%, respectively, compared to other fiber loading composites. For hybrid composites, the experimental results reveal that the highest flexural and torsion properties were achieved at the ratio of 85/15 reinforcement and 60/40 for the fiber ratio of hybrid sugar palm yarn/carbon fiber-reinforced composites. The results from this study suggest that the hybrid composite has a better performance regarding both flexural and torsion properties. The different ratio between matrix and reinforcement has a significant effect on the performance of sugar palm composites. It can be concluded that this type of composite can be utilized for beam, construction applications, and automotive components that demand high flexural strength and high torsional forces.

scholarly journals Effect of Kevlar Fiber and Nano Sio2 on Mechanical Andthermal Properties of Hybrid Composites

2021 ◽  
Vol 37 (3) ◽  
pp. 531-540
Author(s):  
P.S. Yadav ◽  
Rajesh Purohit ◽  
Anil Kothari ◽  
R. S. Rajput
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Thermal Properties ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Mechanical And Thermal Properties ◽  
Nano Sio2 ◽  
Kevlar Fiber ◽  
Heat Deflection Temperature ◽  
Scanning Electron

The aim of the current investigation is an analysis of the mechanical and thermal properties of epoxy/ nano-silica/ Kevlar fiber hybrid composites. The ultrasonic vibration-assisted hand layup process was used for the preparation of composite with different weight percentages (1%, 2%, 3%, and 4%) of Nano SiO2 particles and 2 layers of the Kevlar fiber. For the evolution of mechanical properties tensile tests, hardness tests, impact tests, and flexural tests were done. For evaluation of morphological analysis Field Emission-Scanning Electron Microscopy, X-RD, and FT-IR tests were performed. A heat deflection temperature test was performed for the evaluation of the thermal characteristic of the hybrid composite. The results show the improvement of mechanical and thermal properties of the hybrid composite with increasing wt.% of nano SiO2 particles in the hybrid composites. As per the observation of experimental results, the Field Emission-Scanning Electron Microscopy,Fourier Transform Infrared Spectroscopy, and X-ray diffraction test also show the enhancement of surface morphology and chemical structure of hybrid composites. The heat diffraction test shows the improvement of thermal resistance and heat absorption capability.As per the observation of experimental results, the tensile strength, hardness, and impact strength increased up to 98%, 16%, and 42% respectively. The flexural test shows the improvement of flexural modulus and stresses 46% and 35% respectively. The heat deflection temperature of hybrid composite improves up to 30%.

Thermal and Mechanical Properties of Epoxy Resin Functionalized Copper and Graphene Hybrids using In-situ Polymerization Method

2020 ◽  
Vol 16 ◽  
Author(s):  
Nadia A. Ali ◽  
Alaa M. Abd-Elnaiem ◽  
Seenaa I. Hussein ◽  
Asmaa Sh. Khalil ◽  
Hatem R. Alamri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Wear Resistance ◽  
Epoxy Resin ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Weight Ratio ◽  
Epoxy Composites ◽  
Thermal And Mechanical Properties ◽  
Maximum Hardness

Objective: In this work, graphene (Gr) or/and Cu particles are used to improve the thermal and mechanical properties of epoxy resin. Methods: Various contents of Gr powder (0.1, 0.3, and 0.5 wt%), Cu powder (10, 30, and 50 wt%) were loaded to epoxy to form Gr/epoxy and Cu/epoxy composites, respectively. In addition, hybrids epoxy/Cu/Gr samples were prepared with a selection of lowest (0.1 and 10) and highest (0.5 and 50) ratios of Gr, and Cu, respectively. Results: The thermal conductivity increases with the increasing weight ratio of Gr and Cu as compared to the pure epoxy. The Thermogravimetric analysis (TGA) of epoxy composites and hybrid composites reveals an improvement in the thermal stability. In addition, the mechanical properties such as hardness shore D and the wear resistance are enhanced for both the epoxy composites and hybrids composites. However, the Ep+0.5wt%Gr+50wt%Cu hybrid composite has the maximum hardness 84, thermal conductivity of 3.84 W/m.K, it shows the lowest wear resistance 2.7×10-6 mm3/Nm at loading 10 N. Conclusion: The hybrid composite containing 0.5wt%Gr and 50wt%Cu shows the maximum hardness and thermal conductivity, as well as the lowest wear resistance when compared to other composites. The physical properties of the hybrid composite can be controlled by the host blend, and hence the morphology, and interfacial characteristics.

Mechanical, Absorption and Swelling Properties of Vinyl Ester Based Natural Fibre Hybrid Composites

2021 ◽  
Author(s):  
Nadeem Ahmed Nasimudeen ◽  
Sharwine Karounamourthy ◽  
Joshua Selvarathinam ◽  
Senthil Muthu Kumar Thiagamani ◽  
Harikrishnan Pulikkalparambil ◽  
...  
Keyword(s):  
Impact Strength ◽  
Hybrid Composite ◽  
Vinyl Ester ◽  
Moisture Absorption ◽  
Hybrid Composites ◽  
Natural Fibre ◽  
Potential Candidate ◽  
Swelling Properties ◽  
Flexural Testing ◽  
Structural Applications

Natural fibres such as Banana (B), Jute (J) and Kenaf (K) were hybridized in different stacking sequences in vinyl ester. The composites with hybridized fibres were tested to evaluate their tensile, flexural and impact properties. Further, they were also tested for their water absorption and thickness swelling behavior. The hybridization of the fibre mats had an encouraging outcome on the mechanical behavior. The JKBKBJ hybrid composite possessed the maximum tensile strength (34.12 MPa) while maximum stiffness of 1.667 GPa was observed for the KBJJBK hybrid composites. The observations from the flexural testing indicated that the hybrid composites resisted the flexural load for higher displacement. All the hybrid configurations presented better impact strength over the composites reinforced with kenaf and jute fibres. Among the hybrid composites investigated, the KJBBJK hybrid composite displayed highest impact strength (12.32 kJ/m2). The improved strength, stiffness and lower moisture absorption properties make the composites with hybridized fibres a potential candidate for the light weight structural applications.

scholarly journals Processing and characterization of UHMWPE composite fibres with alumina particles in poly(ethylene-vinyl acetate) matrix

2017 ◽  
Vol 31 (5) ◽  
pp. 689-708 ◽  
Author(s):  
Jelena Zec ◽  
Nataša Tomić ◽  
Milorad Zrilić ◽  
Smilja Marković ◽  
Dušica Stojanović ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Iron Oxide ◽  
Vinyl Acetate ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Ethylene Vinyl Acetate ◽  
Mechanical And Thermal Properties ◽  
Structural Examination ◽  
Alumina Particles ◽  
Poly Ethylene

Processing of hybrid composites represents a challenge for engineers where the aim is to establish compatibility among several materials. The aim of this study is to evaluate the effects of different sizes and morphologies of alumina fillers on the mechanical and thermal properties of the composite fibres based on ultra-high molecular weight polyethylene fibres (UHMWPE). These fibres have an outstanding elastic modulus and they are compatible with nonpolar sequences of the poly(ethylene-co-vinyl acetate) (EVA) matrix. Compared to the fibres, inferior mechanical properties of the matrix can be improved using alumina particles. Commercial aluminium oxide (Al2O3) nanoparticles, commercial whiskers and synthesized particles of Al2O3 doped with iron oxide, incorporated in different weight percentages, were used as fillers. The UHMWPE fibres were impregnated using the solution of EVA in toluene with dispersed particles. Fourier transform infrared spectroscopy and field emission scanning electron microscope were used for structural examination. Tensile testing revealed increasing of modulus of elasticity and strengths of obtained hybrid composite fibres. Thermal gravimetry showed improved thermal stability up to 350°C of the hybrid composite fibres with alumina particles doped with iron oxide. Results of tested samples showed that the best mechanical properties were for hybrid composite fibres with 1 wt% of iron doped alumina filler.

scholarly journals Research on Mechanical Behavior of AMMC (Al-SiC) Composite in Disc Brake

2019 ◽  
Vol 8 (6S3) ◽  
pp. 1432-1437
Keyword(s):  
Silicon Carbide ◽  
Hybrid Composites ◽  
Stir Casting ◽  
Disc Brake ◽  
Mechanical And Thermal Properties ◽  
Pure Aluminium ◽  
Casting Technique ◽  
Automobile Components ◽  
And Performance ◽  
Industrial Needs

To meet the materials demand and performance of automobile components it is necessary of developing composite materials. Aluminium Metal Matrix Composite (AMMC) are utilized to meet the industrial needs. AMMC is the mixture of aluminium and silicon carbide with minimum quantity of other materials like magnesium, aluminium oxide, graphite which are mixed in precise quantity to increase the chemical, mechanical and thermal properties of material. This paper deals with the investigation of mechanical behaviour and properties of AMMC produced by stir casting technique where silicon carbide is reinforced with alloy 6061 for using in Disc Brake. The tensile, flexural, hardness and impact tests were performed and the results showed that the hybrid composites had better properties than pure aluminium and this kind of material may be subjected to use in Disc Brake. The microstructure of the hybrid composites were analyzed using Optical Microscopy.

Sign in / Sign up

Export Citation Format

Share Document