scholarly journals Flour quality and kernel hardness connection in winter wheat

2016 ◽  
Vol 9 (1) ◽  
pp. 33-40 ◽  
Author(s):  
B. P. Szabó ◽  
E. Gyimes ◽  
A. Véha ◽  
Zs. H. Horváth

Abstract Kernel hardness is controlled by friabilin protein and it depends on the relation between protein matrix and starch granules. Friabilin is present in high concentration in soft grain varieties and in low concentration in hard grain varieties. The high gluten, hard wheat our generally contains about 12.0–13.0% crude protein under Mid-European conditions. The relationship between wheat protein content and kernel texture is usually positive and kernel texture influences the power consumption during milling. Hard-textured wheat grains require more grinding energy than soft-textured grains. The aim of our research was to determine the possible relationship between kernel hardness and various other parameters of the our (dough visco-elastic characteristics, wet gluten, water absorption, our recovery, alveograph). We used Perten SKCS 4100 to determine the kernel hardness, while the Perten 3303 mill was used to establish Particle Size Index (PSI). Registered and widely used Hungarian wheat varieties (7 of HRWW and 4 of SRWW) were applied in the study. Twin correlations were used to determine the relationship among the various traits. According to the results, there is a very strong correlation between milling energy and kernel hardness (r = 0:99): The correlation between hardness index and the examined our parameters was also significant (r = 0:81–0:87). We found strong correlation between the milling energy and water absorption (r = 0:88) of our. The associations found in this study will help the better understanding of the technological aspects concerning wheat grain and our quality.


2013 ◽  
Vol 7 (1-2) ◽  
pp. 59-63 ◽  
Author(s):  
Balázs P. Szabó

The aim of this research was the investigation of winter wheat varieties, the kernel hardness and the dough features. We determined the kernel hardness with two dynamic methods. We measured the parameters of flour. The correlations among hardness index and the examined flour parameters were also significant (r=0.816-0.876). We found strong correlation between the grinding energy (eg) and water absorption (r=0.878) of the flour. Hardness Index – wet gluten (r=0.833), and Hardness Index – water absorption (r=0.876), Hardness Index – P value of alveograph (r=0.816) showed also positive correlations. We found correlation the water absorption and P value of alveograph (r=0.873).



1996 ◽  
Vol 34 (3-4) ◽  
pp. 469-473
Author(s):  
Paul Lowe ◽  
Michael Brown ◽  
Kathleen Hudson

There appears to be a limited experience world-wide in the application of thermal drying technology to processing raw undigested sludge. This limited experience has shown that the products from raw sludge processing have a much lower bulk density than those from digested sludge. The apparent reason for this phenomenon demonstrated by this work, is the high concentration of fibres in the raw undigested sludge. Different sludges show varying degrees of fibre concentration with a decrease in fibre content as the proportion of secondary sludge increases. The relationship between the bulk density of the product and the fibre content are given and this shows that as the fibre content increases the bulk density of the product will fall. It is recommended that a compaction/pelletisation stage is included in the process stream for high fibre sludges.



2019 ◽  
Vol 15 (3) ◽  
pp. 228-233
Author(s):  
Prabhavathi Supriya ◽  
Kandikere R. Sridhar

Background: Utilization of wild legumes has received prime importance in the recent past to compensate the scarcity of protein-rich foods as well as to tackle the protein energy malnutrition. Ripened split beans of Canavalia maritima devoid of seed coat and testa serve as traditional nutraceutical source for the coastal dwellers of Southwest India. Objective: The present study projects proximal and functional attributes of uncooked and cooked ripened split beans of C. maritima to be used in the preparation of functional foods. Methods: Proximal properties (moisture, crude protein, total lipids, crude fibre, carbohydrates and calorific value) and functional properties (protein solubility, gelation capacity, water-absorption, oilabsorption, emulsion qualities and foam qualities) of split beans were evaluated by standard methods. Results: Cooking did not significantly changed the crude protein, total lipids, ash, carbohydrates and calorific value, while it significantly increased the crude fibre. The protein solubility, water-absorption capacity, foam capacity and foam stability were significantly higher in uncooked than cooked beans. The cooked beans were superior to uncooked beans in least gelation concentration, low oil-absorption capacity, emulsion activity and emulsion stability. Conclusion: The functional properties of split bean flours were influenced by the proximal components like crude protein, total lipids and crude fibre. The energy-rich ripened split beans of C. maritima can serve as a new potential source for production of value added functional foods owing to their rich protein, rich carbohydrates, low-lipid and potential bioactive attributes.



Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2535
Author(s):  
Ji-Bong Choi ◽  
Yu-Kyoung Kim ◽  
Seon-Mi Byeon ◽  
Jung-Eun Park ◽  
Tae-Sung Bae ◽  
...  

In this study, a hydrogel using single and double crosslinking was prepared using GelMA, a natural polymer, and the effect was evaluated when the double crosslinked hydrogel and tannic acid were treated. The resulting hydrogel was subjected to physicochemical property evaluation, biocompatibility evaluation, and animal testing. The free radicals generated through APS/TEMED have a scaffold form with a porous structure in the hydrogel, and have a more stable structure through photo crosslinking. The double crosslinked hydrogel had improved mechanical strength and better results in cell compatibility tests than the single crosslinked group. Moreover, in the hydrogel transplanted into the femur of a rat, the double crosslinked group showed an osteoinductive response due to the attachment of bone minerals after 4 and 8 weeks, but the single crosslinked group did not show an osteoinductive response due to rapid degradation. Treatment with a high concentration of tannic acid showed significantly improved mechanical strength through H-bonding. However, cell adhesion and proliferation were limited compared to the untreated group due to the limitation of water absorption capacity, and no osteoinduction reaction was observed. As a result, it was confirmed that the treatment of high-concentration tannic acid significantly improved mechanical strength, but it was not a suitable method for improving bone induction due to the limitation of water absorption.



2021 ◽  
Vol 8 (1) ◽  
pp. 109-118
Author(s):  
Erica Lenticchia ◽  
Amedeo Manuello Bertetto ◽  
Rosario Ceravolo

Abstract In the present paper, the acoustic emission (AE) device is used with an innovative approach, based on the calculation of P-wave propagation velocity (vp ), to detect the stiffness characteristics and the diffused damage of in-service old concrete structures. The paper presents the result of a recent testing campaign carried out on the slant pillars composing the vertical bearing structures designed by Pier Luigi Nervi in one of his most iconic buildings: the Hall B of Torino Esposizioni. In order to investigate the properties of these inclined pillars, localizations of artificial sources (hammer impacts), by the triangulation procedure, were performed on three different inclined elements characterized by stiffness discrepancies due to different causes: the casting procedures, executed in different stages, and the enlargement of the hall happened a few years later the beginning of the construction. In the present work, the relationship between the velocity of AE signals and the elastic characteristics (principally elastic modulus, E) is evaluated in order to discriminate the stiffness level of the slanted pillars. The procedure presented made it possible to develop an innovative investigation method able to estimate, by means of AE, the state of conservation and the elastic properties and the damage level of the monitored concrete and reinforced concrete structures.



2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Hui Meng ◽  
Yunping Zhou ◽  
Yunxia Jiang

AbstractObjectivesThe results of existing studies on bisphenol A (BPA) and puberty timing did not reach a consensus. Thereby we performed this meta-analytic study to explore the association between BPA exposure in urine and puberty timing.MethodsMeta-analysis of the pooled odds ratios (OR), prevalence ratios (PR) or hazards ratios (HR) with 95% confidence intervals (CI) were calculated and estimated using fixed-effects or random-effects models based on between-study heterogeneity.ResultsA total of 10 studies involving 5621 subjects were finally included. The meta-analysis showed that BPA exposure was weakly associated with thelarche (PR: 0.96, 95% CI: 0.93–0.99), while no association was found between BPA exposure and menarche (HR: 0.99, 95% CI: 0.89–1.12; OR: 1.02, 95% CI: 0.73–1.43), and pubarche (OR: 1.00, 95% CI: 0.79–1.26; PR: 1.00, 95% CI: 0.95–1.05).ConclusionsThere was no strong correlation between BPA exposure and puberty timing. Further studies with large sample sizes are needed to verify the relationship between BPA and puberty timing.



2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
C Delgado ◽  
M Delgado-Lelievre ◽  
D Lelievre ◽  
A Delgado-Almeida

Abstract Introduction The sodium voltage-gated channel alpha subunit 7 (SCN7A) has been associated to renal Na regulation and hypertension. This study explores the relationship between blood pressure (BP) and urinary overnight Na/K ratio (UONaK) in hypertensives (HT) and normotensive (NT) subjects from from National Heart, Lung and Blood Institute funded, Family Blood Pressure Program (FBPP) that were genotyped for 3 SNPs for SCN7A: CV2161217, CV 356958 and CV433036. Hypothesis Genetic variations in the SCNA7 are differently associated to BP and UONaK in HT and NT. Methods 1,749 subjects genotyped for SCN7A SNPs CV2161217, CV 356958 and CV433036 were analyzed from FBPP. Subjects with diastolic BP (DBP) ≥80 or systolic BP (SBP) ≥130 mmHg were classified HTN; subjects with SBP <130 and DBP <80 mmHg were classified as NT. UONAK was calculated by dividing overnight Na by K concentration. Correlation analysis done with partial variables (use of antihypertensive drug, use of diuretics, overnight urine creatinine). Results For the CV2161217, HTN group (n=1,030), 52% had C/C, 39% C/T and 9% T/T. In NT group (n=719), 52% had C/C, 38% C/T and 10% T/T. In the HT group, subjects with CC genotype showed strong correlation between DBP and UONaK (Fig 1a) while no significant correlation with SBP. Those with CT genotype maintained the correlation between SBP and UONaK (r=0.10, p=0.03) with no correlation with SBP. The TT showed no correlation between UONaK and SBP or DBP. In the NT, subjects with TT genotype showed strong correlation between DBP and UONaK (Fig 1b) and with SB (r=0.256, p=0.03). Those with CT or TT genotypes showed no correlation between UONaK and SBP or DBP. Similar finding were obtained for CV356958 SNP; no similar association was observed in the CV433036 SNP. Conclusions Subjects with the genetic variations in the SCNA7, such as CV2161217 and CV 356958 SNPs, showed significant correlation between blood pressure and overnight urinary sodium potassium. This finding could have important implications in non dipping status observed in some hypertensive patients. Funding Acknowledgement Type of funding source: None



1999 ◽  
Vol 47 (2) ◽  
pp. 181-190 ◽  
Author(s):  
A. Bersényi ◽  
S. Fekete ◽  
I. Hullár ◽  
I. Kádár ◽  
M. Szilágyi ◽  
...  

Carrots were grown on soils polluted by heavy metal salts. Each particular microelement reached a high concentration [molybdenum (Mo) 39.00, cadmium (Cd) 2.30, lead (Pb) 4.01, mercury (Hg) 30.00, and selenium (Se) 36.20 mg/kg dry matter] in the carrot. In a metabolic balance trial conducted with 15 male and 15 female New Zealand White rabbits, the control animals (n = 5) were fed ad libitum with concentrate as basal diet, while the other rabbits received the basal diet and carrots containing the particular microelement. Blood samples were taken to determine the activity of serum enzymes. To investigate the metabolism of Mo, Cd, Pb, Hg and Se, samples were taken from the heart, liver, lungs, kidneys, spleen, ovaries/testicles, entire digestive tract, adipose tissue, femur, hair, faeces and urine. Carrot had significantly higher digestibility for all nutrients than the rabbit concentrate. Carrot samples of high Pb content had the lowest digestibility of crude protein. The microelements differed in their rate of accumulation in the organs examined: Mo and Cd accumulated in the kidneys, Pb in the kidneys, liver, bones and lungs, Hg in the kidneys and liver, while Se in the liver, kidneys and heart. The proportions of microelements eliminated from the body either via the faeces and urine (Mo 80.18% and Se 47.41%) or via the faeces (Cd 37.86%, Pb 66.39%, Hg 64.65%) were determined. Pathohistological examination revealed that the rate of spermatogenesis was reduced in the Mo, Cd, Pb and Hg groups compared to the control. Lead, Cd and Hg intake resulted in a considerable decrease in gamma-glutamyltransferase (GGT) and in an increase of alkaline phosphatase (ALP) activity because of damages to the kidneys and bones. All experimental treatments decreased the activity of cholinesterase (CHE) because of lesions in the liver.



2007 ◽  
Vol 342-343 ◽  
pp. 621-624
Author(s):  
Hyeon Ki Choi ◽  
Si Yeol Kim ◽  
Won Hak Cho

We investigated the relationship between kinematic and kinetic characteristics of foot joints resisting ground reaction force (GRF). Passive elastic characteristics of joint were obtained from the experiment using three cameras and one force plate. The relationship between joint angle and moment was mathematically modeled by using least square method. The calculated ranges of motion were 7o for TM joint, 4o for TT joint and 20o for MP joint. With the model that relates joint angle and plantar pressure, we could get the kinematic data of the joints which are not available from conventional motion analysis. The model can be used not only for biomechanical analysis which simulates gait but also for the clinical evaluations.



2010 ◽  
Vol 8 (4) ◽  
pp. 867-876 ◽  
Author(s):  
Akemi Shibuya ◽  
Jansen Zuanon ◽  
Maria Lúcia G. de Araújo ◽  
Sho Tanaka

The relationship between the distribution of the lateral line canals and their functionality has not been well examined in elasmobranchs, especially among Neotropical freshwater stingrays of the family Potamotrygonidae. The spatial distribution of the canals and their tubules and the quantification of the neuromasts were analyzed in preserved specimens of Potamotrygon motoro, P. orbignyi, Potamotrygon sp. "cururu", and Paratrygon aiereba from the middle Negro River, Amazonas, Brazil. The hyomandibular, infraorbital, posterior lateral line, mandibular, nasal and supraorbital canals were characterized and their pores and neuromasts quantified. The ventral canals are known to facilitate the accurate localization of prey items under the body, and our results indicate that the dorsal canals may be employed in identifying the presence of predators or potential prey positioned above the stingray's body. The presence of non-pored canals in the ventral region may be compensated by the high concentration of neuromasts found in the same area, which possibly allow the accurate detection of mechanical stimuli. The concentration of non-pored canals near the mouth indicates their importance in locating and capturing prey buried in the bottom substrate, possibly aided by the presence of vesicles of Savi.



Sign in / Sign up

Export Citation Format

Share Document