Valorisation of by-Products/Waste of Agro-Food Industry by the Pyrolysis Process

2016 ◽  
Vol 3 (1) ◽  
pp. 1-11 ◽  
Author(s):  
D. Fino ◽  
◽  
Y.S. Camacho ◽  
S Bensaid ◽  
B. Ruggeri ◽  
...  
Keyword(s):  
Food Industry ◽  
Pyrolysis Process ◽  
By Products

scholarly journals Monomers, Materials and Energy from Coffee By-Products: A Review

2021 ◽  
Vol 13 (12) ◽  
pp. 6921
Author(s):  
Laura Sisti ◽  
Annamaria Celli ◽  
Grazia Totaro ◽  
Patrizia Cinelli ◽  
Francesca Signori ◽  
...  
Keyword(s):  
Circular Economy ◽  
Food Industry ◽  
Food Packaging ◽  
Low Cost ◽  
Biofuel Production ◽  
Material Technology ◽  
Coffee Production ◽  
Coffee Pulp ◽  
Coffee Waste ◽  
By Products

In recent years, the circular economy and sustainability have gained attention in the food industry aimed at recycling food industrial waste and residues. For example, several plant-based materials are nowadays used in packaging and biofuel production. Among them, by-products and waste from coffee processing constitute a largely available, low cost, good quality resource. Coffee production includes many steps, in which by-products are generated including coffee pulp, coffee husks, silver skin and spent coffee. This review aims to analyze the reasons why coffee waste can be considered as a valuable source in recycling strategies for the sustainable production of bio-based chemicals, materials and fuels. It addresses the most recent advances in monomer, polymer and plastic filler productions and applications based on the development of viable biorefinery technologies. The exploration of strategies to unlock the potential of this biomass for fuel productions is also revised. Coffee by-products valorization is a clear example of waste biorefinery. Future applications in areas such as biomedicine, food packaging and material technology should be taken into consideration. However, further efforts in techno-economic analysis and the assessment of the feasibility of valorization processes on an industrial scale are needed.

scholarly journals Valorization of food industry waste and by-products using 3D printing: A study on the development of value-added functional cookies

Future Foods ◽  
2021 ◽  
pp. 100036
Author(s):  
Bhagya Jagadiswaran ◽  
Vishvaa Alagarasan ◽  
Priyadharshini Palanivelu ◽  
Radhika Theagarajan ◽  
J.A. Moses ◽  
...  
Keyword(s):  
3D Printing ◽  
Food Industry ◽  
Value Added ◽  
Industry Waste ◽  
Food Industry Waste ◽  
By Products

scholarly journals Anthocyanins Recovered from Agri-Food By-Products Using Innovative Processes: Trends, Challenges, and Perspectives for Their Application in Food Systems

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2632
Author(s):  
Henrique Silvano Arruda ◽  
Eric Keven Silva ◽  
Nayara Macêdo Peixoto Araujo ◽  
Gustavo Araujo Pereira ◽  
Glaucia Maria Pastore ◽  
...  
Keyword(s):  
Food Systems ◽  
Food Industry ◽  
Biological Properties ◽  
Extraction Techniques ◽  
Naturally Occurring ◽  
Current Review ◽  
Natural Colorants ◽  
Conventional Extraction ◽  
The Stability ◽  
By Products

Anthocyanins are naturally occurring phytochemicals that have attracted growing interest from consumers and the food industry due to their multiple biological properties and technological applications. Nevertheless, conventional extraction techniques based on thermal technologies can compromise both the recovery and stability of anthocyanins, reducing their global yield and/or limiting their application in food systems. The current review provides an overview of the main innovative processes (e.g., pulsed electric field, microwave, and ultrasound) used to recover anthocyanins from agri-food waste/by-products and the mechanisms involved in anthocyanin extraction and their impacts on the stability of these compounds. Moreover, trends and perspectives of anthocyanins’ applications in food systems, such as antioxidants, natural colorants, preservatives, and active and smart packaging components, are addressed. Challenges behind anthocyanin implementation in food systems are displayed and potential solutions to overcome these drawbacks are proposed.

scholarly journals Biodegradable Chitosan Films with ZnO Nanoparticles Synthesized Using Food Industry By-Products—Production and Characterization

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 646
Author(s):  
Victor Gomes Lauriano Souza ◽  
Marta M. Alves ◽  
Catarina F. Santos ◽  
Isabel A. C. Ribeiro ◽  
Carolina Rodrigues ◽  
...  
Keyword(s):  
Zinc Oxide Nanoparticles ◽  
Food Industry ◽  
Low Cost ◽  
Young Modulus ◽  
Barrier Properties ◽  
Zno Nps ◽  
Elongation At Break ◽  
Chitosan Films ◽  
By Products ◽  
Different Levels

This work aimed to produce bionanocomposites of chitosan incorporated with zinc oxide nanoparticles (ZnO NPs) synthesized using food industry by-products and to characterize them. Such nanoparticles are highlighted due to their low cost, antimicrobial activity, accessibility, and sustainability synthesis. Four different levels of ZnO NPs (0, 0.5, 1.0, and 2.0% w/w of chitosan) were tested, and the bionanocomposites were characterized in terms of their hydrophobicity, mechanical, optical, and barrier properties. Overall, the incorporation of ZnO NPs changed the composites from brittle to ductile, with enhanced elongation at break and reduced Young Modulus and tensile strength. Thus, ZnO NPs acted as plasticizer, turning the films more flexible, due to the presence of organic compounds on the NPs. This also favored permeability of oxygen and of water vapor, but the good barrier properties were maintained. Optical properties did not change statistically with the ZnO NPs incorporation. Thus, the characterization presented in this paper may contribute to support a decision on the choice of the material’s final application.

Probiotic properties of ice creams produced with dietary fibres from by-products of the food industry

2017 ◽  
Vol 71 (1) ◽  
pp. 174-182 ◽  
Author(s):  
Ahmet Ayar ◽  
Hatice Siçramaz ◽  
Serpil Öztürk ◽  
Suzan Öztürk Yilmaz
Keyword(s):  
Food Industry ◽  
Probiotic Properties ◽  
Dietary Fibres ◽  
Ice Creams ◽  
By Products

scholarly journals Selected properties of biodegradable material produced from thermoplastic starch with by-products of food industry addition

2017 ◽  
Vol 19 (2) ◽  
pp. 51-55 ◽  
Author(s):  
Ewa Zdybel ◽  
Ewa Tomaszewska-Ciosk ◽  
Mateusz Gertchen ◽  
Wioletta Drożdż
Keyword(s):  
Thermal Conductivity ◽  
Food Industry ◽  
Thermoplastic Starch ◽  
Extrusion Process ◽  
Apple Pomace ◽  
Biodegradable Material ◽  
Solubility In Water ◽  
Conductivity Water ◽  
Fruit Pomace ◽  
By Products

Abstract In this work extrusion process were used to create thermoplastic starch and to mix obtained starch with linen, quince and apple pomace at the same time. Obtained starch beads were formed in shapes. In experimental material was determined thermal conductivity, water absorption and the solubility in water. It is possible to get the biodegradable material produced from thermoplastic starch with an addition of fruit pomace. Adding pomace and glycerine to the biodegradable material made from starch change of susceptibility on water action. In the case of materials containing pomace, glycerine addition decreases the susceptibility on water action compared to the material manufactured with pomace addition but without glycerine. In the material containing pomace, glycerine addition caused the increase of the thermal insulation time compared to the material with pomace but no glycerine in it.

scholarly journals The Ethical Merits of the Use of By-products in Agriculture

1970 ◽  
Vol 66 (1) ◽  
Author(s):  
Stefan AERTS ◽  
Ruben BOONEN ◽  
Johan DE TAVERNIER ◽  
Dirk LIPS
Keyword(s):  
Food Industry ◽  
Biomass Energy ◽  
Relative Importance ◽  
Ethical Aspects ◽  
Feed Manufacturing ◽  
Target Animal ◽  
Feed Production ◽  
Direct And Indirect Impacts ◽  
Indirect Impacts ◽  
By Products

A dramatic gain in efficiency is an absolute necessity if we are to overcome the agricultural challenges of the third millennium. One of the ways that could lead to such a gain in efficiency is a renewed and augmented use of by-products. In an agricultural context the food industry is a major source of potentially valuable by-products. For other Western European countries VALORBIN (2003a) mentions 5 million tons in Denmark, 11 million in The Netherlands, and 14 million tons in Germany. 70 to 80 % of food industry by-products are reused in feed manufacturing. In all applications, two important ethical aspects seem to overarch all others, being (the care for) public health, and the need for recycling. Both aspects will be important with all by-products and all applications, but their relative importance will differ. This does not mean that zero-risk or maximum recycling need to be the goal. In both aspects environmental considerations are included. It is important to keep an eye out for direct and indirect impacts on other products. A hierarchy seems to exists, in which reuse as food has priority over use as feed or biomass (energy or green chemistry), and with a sustained faith as waste as the least preferable option. The by-products that one wants to use in feed production, will have to be selected based on type (e.g. category 3 animal by-products should be safe), traceability (single sourced products are preferred) and goal (e.g. is the target animal omnivorous).

scholarly journals Evaluation of Fatty Acids Profile as a Useful Tool towards Valorization of By-Products of Agri-Food Industry

Foods ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2867
Author(s):  
Rui Ferreira ◽  
Sílvia Lourenço ◽  
André Lopes ◽  
Carlos Andrade ◽  
José S. Câmara ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Food Industry ◽  
Saturated Fatty Acids ◽  
Monounsaturated Fatty Acids ◽  
Scientific Basis ◽  
Grape Pomace ◽  
Added Value ◽  
Fatty Acids Profile ◽  
Potential Applications ◽  
By Products

Worldwide, the food industry generates a large number of by-products from a wide variety of sources. These by-products represent an interesting and economical source of added value components with potential functionalities and/or bioactivities, which might be explored for industrial purposes, encouraging and promoting the circular economy concept. In this context, the current work aimed to evaluate the fatty acids (FAs) profile using gas chromatography–flame ionization detector (GC–FID) and Fourier Transform Infrared (FTIR), as well as the determination of related health lipid indices (e.g., atherogenic (AI) and thrombogenic (TI)) as a powerful strategy to investigate the potential applications of different agri-food by-products for human nutrition and animal feeding. This work results showed that polyunsaturated fatty acids (PUFAs) are the predominant group in grape pomace (72.7%), grape bunches (54.3%), and brewer’s spent grain (BSG, 59.0%), whereas carrot peels are dominated by monounsaturated fatty acids (MUFAs, 47.3%), and grape stems (46.2%), lees (from 50.8 to 74.1%), and potato peels (77.2%) by saturated fatty acids (SFAs). These findings represent a scientific basis for exploring the nutritional properties of agri-food by-products. Special attention should be given to grape pomace, grape bunches, and BSG since they have a high content of PUFAs (from 54.3 to 72.7%) and lower AI (from 0.11 to 0.38) and TI (from 0.30 to 0.56) indexes, suggesting their potential to provide a variety of health benefits against cardiovascular diseases including well-established hypotriglyceridemia and anti-inflammatory effects, products to which they are added.

Sign in / Sign up

Export Citation Format

Share Document