scholarly journals Assessment of vibration amplitude and transmembrane pressure on vibratory shear enhanced membrane filtration for treating dairy wastewater

2021 ◽  
Vol 50 (1) ◽  
pp. 42-53
Author(s):  
Sz. Gy. Szerencsés ◽  
S. Beszédes ◽  
Zs. László ◽  
G. Veréb ◽  
D. Szalay ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Vibration Amplitude ◽  
Membrane Filtration ◽  
Oxygen Demand ◽  
Dairy Wastewater ◽  
Transmembrane Pressure ◽  
Operational Parameters ◽  
Limit Values ◽  
Energy And Environment

AbstractIn this study, statistical analysis was performed to investigate the influence of operational parameters based on experimental results. The research aimed to know whether a long-term discontinuous module vibration operation is possible without adversely affecting filtration efficiency. Polymer membranes were compared by surface characteristics with contact angle measurements and selected for further membrane filtration experiments for dairy wastewater treatment. The effect of the main operational parameters, membrane module vibration amplitude (Avibr.) and transmembrane pressure (TMP), was investigated using a vibratory shear enhanced processing (VSEP) module with ultrafiltration (UF) and nanofiltration (NF) membranes. Components of the permeates, including chemical oxygen demand (COD), were measured, and membrane rejections were calculated to compare with threshold limit values. The results suggest that proper combination of Avibr. and TMP could mitigate membrane fouling. However, discontinuous module vibration resulted in more clogged membrane with lower fluxes, but slightly higher rejections. We conclude that investigating the significance of operational parameters is necessary for a wider, more energy and environment-friendly application in wastewater treatment.

scholarly journals Membrane Filtration as Post-Treatment of Rotating Biological Contactor for Wastewater Treatment

2021 ◽  
Vol 13 (13) ◽  
pp. 7287
Author(s):  
Sharjeel Waqas ◽  
Muhammad Roil Bilad ◽  
Nurul Huda ◽  
Noorfidza Yub Harun ◽  
Nik Abdul Hadi Md Nordin ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Membrane Filtration ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Post Treatment ◽  
Rotating Biological Contactor ◽  
Promising Alternative ◽  
Biological Performance ◽  
Development And Environment

A rotating biological contactor (RBC) offers a low energy footprint but suffers from performance instability, making it less popular for domestic wastewater treatment. This paper presents a study on an RBC integrated with membrane technology in which membrane filtration was used as a post-treatment step (RBC–ME) to achieve enhanced biological performance. The RBC and RBC–ME systems were operated under different hydraulic retention times (HRTs) of 12, 18, 24, and 48 h, and the effects of HRT on biological performance and effluent filterability were assessed. The results show that RBC–ME demonstrates superior biological performance than the standalone RBC. The RBC–ME bioreactor achieved 87.9 ± 3.2% of chemical oxygen demand (COD), 98.9 ± 1.1% ammonium, 45.2 ± 0.7% total nitrogen (TN), and 97.9 ± 0.1% turbidity removals. A comparison of the HRTs showed that COD and TN removal efficiency was the highest at 48 h, with 92.4 ± 2.4% and 48.6 ± 1.3% removal efficiencies, respectively. The longer HRTs also lead to better RBC effluent filterability. The steady-state permeability increased respectively by 2.4%, 9.5%, and 19.1% at HRTs of 18, 24, and 48 h, compared to 12 h. Our analysis of membrane fouling shows that fouling resistance decreased at higher HRTs. Overall, RBC–ME offered a promising alternative for traditional suspended growth processes with higher microbial activity and enhanced biological performance, which is in line with the requirements of sustainable development and environment-friendly treatment.

scholarly journals Membrane Fouling Controlled by Adjustment of Biological Treatment Parameters in Step-Aerating MBR

Membranes ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 553
Author(s):  
Dimitra C. Banti ◽  
Manassis Mitrakas ◽  
Petros Samaras
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Municipal Wastewater ◽  
Operating Conditions ◽  
Transmembrane Pressure ◽  
Aeration Tank ◽  
Filamentous Bacteria ◽  
Membrane Performance ◽  
Low Concentrations ◽  
Fouling Reduction

A promising solution for membrane fouling reduction in membrane bioreactors (MBRs) could be the adjustment of operating parameters of the MBR, such as hydraulic retention time (HRT), food/microorganisms (F/M) loading and dissolved oxygen (DO) concentration, aiming to modify the sludge morphology to the direction of improvement of the membrane filtration. In this work, these parameters were investigated in a step-aerating pilot MBR that treated municipal wastewater, in order to control the filamentous population. When F/M loading in the first aeration tank (AT1) was ≤0.65 ± 0.2 g COD/g MLSS/d at 20 ± 3 °C, DO = 2.5 ± 0.1 mg/L and HRT = 1.6 h, the filamentous bacteria were controlled effectively at a moderate filament index of 1.5–3. The moderate population of filamentous bacteria improved the membrane performance, leading to low transmembrane pressure (TMP) at values ≤2 kPa for a great period, while at the control MBR the TMP gradually increased reaching 14 kPa. Soluble microbial products (SMP), were also maintained at low concentrations, contributing additionally to the reduction of ΤΜP. Finally, the step-aerating MBR process and the selected imposed operating conditions of HRT, F/M and DO improved the MBR performance in terms of fouling control, facilitating its future wider application.

scholarly journals Evaluation of Anaerobic Digestion of Dairy Wastewater in an Innovative Multi-Section Horizontal Flow Reactor

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2392 ◽  
Author(s):  
Marcin Dębowski ◽  
Marcin Zieliński ◽  
Marta Kisielewska ◽  
Joanna Kazimierowicz
Keyword(s):  
Wastewater Treatment ◽  
Anaerobic Digestion ◽  
Flow Reactor ◽  
Biogas Production ◽  
Oxygen Demand ◽  
Methane Content ◽  
Dairy Wastewater ◽  
Horizontal Flow ◽  
Organic Loading Rate ◽  
Biogas Yield

The aim of this study was the performance evaluation of anaerobic digestion of dairy wastewater in a multi-section horizontal flow reactor (HFAR) equipped with microwave and ultrasonic generators to stimulate biochemical processes. The effects of increasing organic loading rate (OLR) ranging from 1.0 g chemical oxygen demand (COD)/L·d to 4.0 g COD/L·d on treatment performance, biogas production, and percentage of methane yield were determined. The highest organic compounds removals (about 85% as COD and total organic carbon—TOC) were obtained at OLR of 1.0–2.0 g COD/L·d. The highest biogas yield of 0.33 ± 0.03 L/g COD removed and methane content in biogas of 68.1 ± 5.8% were recorded at OLR of 1.0 g COD/L·d, while at OLR of 2.0 g COD/L·d it was 0.31 ± 0.02 L/COD removed and 66.3 ± 5.7%, respectively. Increasing of the OLR led to a reduction in biogas productivity as well as a decrease in methane content in biogas. The best technological effects were recorded in series with an operating mode of ultrasonic generators of 2 min work/28 min break. More intensive sonication reduced the efficiency of anaerobic digestion of dairy wastewater as well as biogas production. A low nutrient removal efficiency was observed in all tested series of the experiment, which ranged from 2.04 ± 0.38 to 4.59 ± 0.68% for phosphorus and from 9.67 ± 3.36 to 20.36 ± 0.32% for nitrogen. The effects obtained in the study (referring to the efficiency of wastewater treatment, biogas production, as well as to the results of economic analysis) proved that the HFAR can be competitive to existing industrial technologies for food wastewater treatment.

Methanogenic Archaea structure under different operational parameters of anaerobic dairy wastewater treatment

2012 ◽  
Vol 29 ◽  
pp. S183
Author(s):  
Magdalena Zielińska ◽  
Agnieszka Cydzik-Kwiatkowska ◽  
Marcin Zieliński ◽  
Marcin Dębowski
Keyword(s):  
Wastewater Treatment ◽  
Methanogenic Archaea ◽  
Dairy Wastewater ◽  
Operational Parameters

Electrically enhanced MBR system for total nutrient removal in remote northern applications

2012 ◽  
Vol 65 (4) ◽  
pp. 737-742 ◽  
Author(s):  
V. Wei ◽  
M. Elektorowicz ◽  
J. A. Oleszkiewicz
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Extracellular Polymeric Substances ◽  
Climatic Conditions ◽  
Transmembrane Pressure ◽  
Treatment Technology ◽  
Electrically Enhanced ◽  
P Removal

Thousands of sparsely populated communities scatter in the remote areas of northern Canada. It is economically preferable to adopt the decentralized systems to treat the domestic wastewater because of the vast human inhabitant distribution and cold climatic conditions. Electro-technologies such as electrofiltration, elctrofloatation, electrocoagulation and electrokinetic separation have been applied in water and conventional wastewater treatment for decades due to the minimum requirements of chemicals as well as ease of operation. The membrane bioreactor (MBR) is gaining popularity in recent years as an alternative water/wastewater treatment technology. However, few studies have been conducted to hyphenate these two technologies. The purpose of this work is to design a novel electrically enhanced membrane bioreactor (EMBR) as an alternative decentralized wastewater treatment system with improved nutrient removal and reduced membrane fouling. Two identical submerged membranes (GE ZW-1 hollow fiber module) were used for the experiment, with one as a control. The EMBR and control MBR were operated for 4 months at room temperature (20 ± 2 °C) with synthetic feed and 2 months at 10 °C with real sewage. The following results were observed: (1) the transmembrane pressure (TMP) increased significantly more slowly in the EMBR and the interval between the cleaning cycles of the EMBR increased at least twice; (2) the dissolved chemical oxygen demand (COD) or total organic carbon (TOC) in the EMBR biomass was reduced from 30 to 51%, correspondingly, concentrations of the extracellular polymeric substances (EPS), the major suspicious membrane foulants, decreased by 26–46% in the EMBR; (3) both control and EMBR removed >99% of ammonium-N and >95% of dissolved COD, in addition, ortho-P removal in the EMBR was >90%, compared with 47–61% of ortho-P removal in the MBR; and (4) the advantage of the EMBR over the conventional MBR in terms of membrane fouling retardation and phosphorus removal was further demonstrated at an operating temperature of 10 °C when fed with real sewage. The EMBR system has the potential for highly automated control and minimal maintenance, which is particularly suitable for remote northern applications.

scholarly journals Effect of vibration on the efficiency of ultrafiltration

2021 ◽  
Vol 15 (1) ◽  
pp. 37-44
Author(s):  
Szabolcs Gyula Szerencsés ◽  
Sándor Beszédes ◽  
Zsuzsanna László ◽  
Gábor Veréb ◽  
Balázs Szegedi ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Energy Demand ◽  
Membrane Filtration ◽  
The European Union ◽  
Treatment Technology ◽  
Filtration Resistance ◽  
Filtration System ◽  
Total Filtration ◽  
Sustainable Wastewater Treatment

Nowadays, several environmental challenges are present to cope with. One with outstanding importance is the protection of our water supplies, therefore examination of wastewater treatment technology is a priority, especially in the European Union. In this work, the effect of membrane module vibration amplitude on the efficiency of ultrafiltration (UF) was investigated in a vibratory shear enhanced membrane filtration system. Based on the results of model dairy effluent UF and statistical analysis, the maximum vibration level available resulted in the most efficient filtration process, due to the most significant reduction of membrane fouling. From our results it was observed that the permeate fluxes more than doubled, specific energy demand was roughly halved, with almost identical retentions for organic matter, and total filtration resistance was reduced to less than half. Results also showed that setting the optimal operating parameters, an advantageous, efficiency focused, and sustainable wastewater treatment technology can be established.

scholarly journals Impacts of the specific cake resistance on mbr fouling for wastewater treatment

2021 ◽  
Vol 72 (7) ◽  
pp. 841-849
Author(s):  
Guigui Christelle ◽  
Nga Vu Thi Thu
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Municipal Wastewater ◽  
Peak Height ◽  
Transmembrane Pressure ◽  
Strongly Correlated ◽  
Municipal Wastewater Treatment ◽  
Fouling Resistance ◽  
Sustainable Operation ◽  
Specific Cake Resistance

Membrane bioreactor (MBR) has been increasingly used for municipal wastewater treatment and reuse due to its good effluent quality. However, membrane fouling remains the major limitation of MBR. Understanding fouling is still a key issue for a more sustainable operation of MBRs. Thus, this research presents the influence of specific cake resistance (α) on the fouling propensity in the MBR. Correlation between α value with fouling resistance (Rf), fouling rate (dTMP/dt), especially of peak height 100-1000 kDa protein-like SMPs was investigated. The result reported that the α value was strongly correlated with the dTMP/dt in the MBR (R2 value of close to 1). In this study, however, there is an obvious discrepancy between the fouling resistance calculated from the resistance in the series model and the α value in the supernatant filtration. These observations demonstrated that the fouling propensities of the membrane could be monitored by the transmembrane pressure and the fouling characteristics, include fouling resistance and specific cake resistance in the filtration cell.

scholarly journals UV and bacteriophages as a chemical-free approach for cleaning membranes from anaerobic bioreactors

2020 ◽  
Author(s):  
Giantommaso Scarascia ◽  
Luca Fortunato ◽  
Yevhen Myshkevych ◽  
Hong Cheng ◽  
TorOve Leiknes ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Bioreactor ◽  
Combined Treatment ◽  
Chemical Cleaning ◽  
High Quality ◽  
Anaerobic Membrane Bioreactor ◽  
Membrane Biofouling ◽  
Uv C

ABSTRACTAnaerobic membrane bioreactor (AnMBR) for wastewater treatment has attracted much interest due to its efficacy in providing high quality effluent with minimal energy costs. However, membrane biofouling represents the main bottleneck for AnMBR because it diminishes flux and necessitates frequent replacement of membranes. In this study, we assessed the feasibility of combining bacteriophages and UV-C irradiation to provide a chemical-free approach to remove biofoulants on the membrane. The combination of bacteriophage and UV-C resulted in better log cells removal and twice higher extracellular polymeric substance (EPS) concentration reduction in mature biofoulants compared to UV-C. A reduction in the relative abundance of Acinetobacter spp. and selected gram-positive bacteria associated with the membrane biofilm was also achieved by the new cleaning approach. Microscopic analysis further revealed the formation of cavities in the biofilm due to bacteriophages and UV-C irradiation, which would be beneficial to maintain water flux through the membrane. When the combined treatment was further compared with the common chemical cleaning procedure, a similar reduction on the cell numbers was observed (1.4 log). However, combined treatment was less effective in removing EPS compared with chemical cleaning. These results suggest that the combination of UV-C and bacteriophage have an additive effect in biofouling reduction, representing a potential chemical-free method to remove reversible biofoulants on membrane fitted in an anaerobic membrane bioreactor.SIGNIFICANCEAnaerobic membrane bioreactors can achieve high quality effluent with a reduced energy consumption. However, biofouling represents the main bottleneck for membrane filtration efficiency. Biofouling is commonly reduced through chemical treatment. These agents are often detrimental for the environment and health safety due to the formation of toxic byproducts. Therefore, we present a new approach, based on the additive antifouling action of bacteriophages infection and UV-C irradiation, to reduce anaerobic membrane biofouling. This new strategy could potentially delay the occurrence of membrane fouling by removing the reversible fouling layers on membranes, in turn reducing the frequencies and amount of chemicals needed throughout the course of wastewater treatment.

scholarly journals Effect of Photooxidation on Nanofiltration Membrane Fouling During Wastewater Treatment from the Confectionery Industry

Water ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 793
Author(s):  
Anna Marszałek ◽  
Ewa Puszczało
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Cross Flow ◽  
Oxygen Demand ◽  
Industrial Applications ◽  
Treated Wastewater ◽  
Toc Removal ◽  
Before And After ◽  
Wastewater Quality ◽  
Uv Lamp

The research in this article aimed to present the possibilities of wastewater treatment coming from the confectionery plant in the nanofiltration (NF) process and the use of photooxidation to mitigate membrane fouling. The process was carried out initially in a dead-end flow system, where the most favorable membrane was selected. Next, the purification efficiency and blocking intensity of this membrane in the system were compared with cross flow. The next research involved the use of a photolytic oxidation process to pretreat sugar wastewater. UV radiation was emitted by a medium pressure mercury UV lamp model TQ 150 V. The effectiveness of the process was also evaluated based on the degree of pollutant load removal. The evaluation of the efficiency of a treatment process was based on the change of wastewater quality indicators before and after the membrane process. The following parameters were controlled: color, COD (chemical oxygen demand), TOC (total organic carbon), absorbance of UV254, nitrate, phosphate, ammonium, conductivity, and pH. During the course of pressure filtration, the following properties of the membrane were determined: the dependence of the volumetric flux of the permeate on the process duration, the permeability of the membrane, as well as the contact angle of the membranes. It was found that the use of UV reduced the phenomenon of fouling of nanofiltration membranes. The value of the permeate volumetric flow after the hour of running the process increased by 17%. However, no impact of UV on the efficiency of wastewater treatment was found. However, the NF process provided the required quality of treated wastewater that can be reused in industrial applications. The NF process resulted in a total decrease in absorbance, 99% TOC removal, and 98% color removal.

Treatment of waste thermal waters by ozonation and nanofiltraton

2013 ◽  
Vol 67 (6) ◽  
pp. 1272-1279 ◽  
Author(s):  
Z. L. Kiss ◽  
A. Szép ◽  
S. Kertész ◽  
C. Hodúr ◽  
Z. László
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Separation ◽  
Oxygen Demand ◽  
Organic Content ◽  
Ozone Treatment ◽  
Thermal Waters ◽  
Toxic Compounds ◽  
Ozone Pretreatment ◽  
High Organic Content

After their use for heating, e.g. in greenhouses, waste thermal waters may cause environmental problems due to their high contents of ions, and in some cases organic matter (associated with an oxygen demand) or toxic compounds. The aims of this work were to decrease the high organic content of waste thermal water by a combination of ozone treatment and membrane separation, and to investigate the accompanying membrane fouling. The results demonstrated that the chemical oxygen demand and the total organic content can be effectively decreased by a combination of ozone pretreatment and membrane filtration. Ozone treatment is more effective for phenol elimination than nanofiltration alone: with a combination of the two processes, 100% elimination efficiency can be achieved. The fouling index b proved to correlate well with the fouling and polarization layer resistances.

Sign in / Sign up

Export Citation Format

Share Document