Controlling Cell Growth by Nanoparticles

2006 ◽  
Vol 950 ◽  
Author(s):  
Sergiy Zankovych ◽  
Joerg Bossert ◽  
Ines Thiele ◽  
Klaus D. Jandt ◽  
Liga Berzina-Cimdina

ABSTRACTWe report preliminary results of using nanoparticles to control cell attachment and growth. We present the way to create titanium surfaces with different roughness in a rage between 2 nm and 117 nm by using nanoparticles as a superficial layer and varying the evaporation parameters. We examined cell proliferation on titanium substrates with increased surface roughness compared to smooth titanium surface. We used nanoparticles to create a micrometer-sized lateral layout onto substrates preliminary structured by microcontact printing. We demonstrate controlled cell growth on substrates laterally structured with nanoparticles.

2009 ◽  
Vol 24 (3) ◽  
pp. 200-205 ◽  
Author(s):  
Taís Somacal Novaes Silva ◽  
Denise Cantarelli Machado ◽  
Christian Viezzer ◽  
Aurelício Novaes Silva Júnior ◽  
Marília Gerhardt de Oliveira

PURPOSE: To assess the proliferation and differentiation of human bone marrow-derived cells cultured on titanium surfaces with different roughness characteristics. METHODS: Cells obtained from the iliac crest of an adult human donor were routinely processed and cultured on titanium surfaces of varying roughness, according to their preparation method: polishing only (smooth surface) and polishing followed by etching with HF/HNO3 for 15 and 30 minutes (rough surfaces). Surfaces were assessed using scanning electronic microscopy and profilometry. RESULTS: Titanium disks etched with acid for 15 minutes allowed greater cell proliferation in all culture periods. The level of osteopontin and osteocalcin expression was increased in both acid-etched groups, which indicates an advanced stage of differentiation of cells into osteoblasts. CONCLUSIONS: Increased surface roughness accelerates the differentiation of undifferentiated mesenchymal cells into osteogenic lineage cells, but does not necessarily favor cell proliferation. An intermediate surface roughness of 0.5µm (acid etching for 15 minutes) favors both initial and final cell responses.


2012 ◽  
Vol 487 ◽  
pp. 730-734 ◽  
Author(s):  
Chang Jiang Pan ◽  
Yu Dong Nie ◽  
Yun Xiao Dong

In this paper, two kinds of stamps (squares (a×a)) separated by spacing b, the values of a and b were varied from 2.5 µm to 50 µm), i.e. positive and negative stamps, were prepared. The stamps inked with the rhodamine-labeled bovine serum albumin (BSA) were then microcontacted with the aldehyde-functionalized titanium surfaces. Water contact angle and X-ray photoelectron spectrum (XPS) indicated that BSA can be covalently immobilized on aldehyde modified titanium surface by microcontact printing. The experimental results of CLSM showed that the patterns with resolution from 2.5 µm to 50 µm were obtained successfully. Both positive stamp and negative stamp were deformed when the value of a was less than or equal to 5 µm, which resulted in replication errors. Furthermore, the larger spacing (50 µm) resulted in stamp collapse when the value a of the positive stamp was less than or equal to 10 µm, leading to whole fluorescence on substrates.


2021 ◽  
Vol 118 (4) ◽  
pp. e2016778118
Author(s):  
Zebulon G. Levine ◽  
Sarah C. Potter ◽  
Cassandra M. Joiner ◽  
George Q. Fei ◽  
Behnam Nabet ◽  
...  

O-GlcNAc transferase (OGT), found in the nucleus and cytoplasm of all mammalian cell types, is essential for cell proliferation. Why OGT is required for cell growth is not known. OGT performs two enzymatic reactions in the same active site. In one, it glycosylates thousands of different proteins, and in the other, it proteolytically cleaves another essential protein involved in gene expression. Deconvoluting OGT’s myriad cellular roles has been challenging because genetic deletion is lethal; complementation methods have not been established. Here, we developed approaches to replace endogenous OGT with separation-of-function variants to investigate the importance of OGT’s enzymatic activities for cell viability. Using genetic complementation, we found that OGT’s glycosyltransferase function is required for cell growth but its protease function is dispensable. We next used complementation to construct a cell line with degron-tagged wild-type OGT. When OGT was degraded to very low levels, cells stopped proliferating but remained viable. Adding back catalytically inactive OGT rescued growth. Therefore, OGT has an essential noncatalytic role that is necessary for cell proliferation. By developing a method to quantify how OGT’s catalytic and noncatalytic activities affect protein abundance, we found that OGT’s noncatalytic functions often affect different proteins from its catalytic functions. Proteins involved in oxidative phosphorylation and the actin cytoskeleton were especially impacted by the noncatalytic functions. We conclude that OGT integrates both catalytic and noncatalytic functions to control cell physiology.


2005 ◽  
Vol 284-286 ◽  
pp. 117-120 ◽  
Author(s):  
Elisabeth Engel ◽  
L. Asin ◽  
J.A. Delgado ◽  
C. Aparicio ◽  
Josep A. Planell ◽  
...  

Calcium phosphate cements (CPC) are being applied as bone regeneration materials. New methods are being developed to create macroporosity, in order enhance the angiogenesis, bone colonization and biodegradation of the material. In this study the effect of the incorporation of albumen as foaming agent in an a-tricalcium phosphate (a-TCP) cement, in terms of the surface roughness and in vitro cell response, was studied. The addition of albumen to CPC cements increased the surface roughness of the cements. Cell cultures, using MG63 osteoblasts, were performed and showed that cell attachment was not affected by the presence of albumen. However, cell proliferation was significantly increased in the albumen-containing cements.


Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1827 ◽  
Author(s):  
Vaclav Babuska ◽  
Jan Palan ◽  
Jana Kolaja Dobra ◽  
Vlastimil Kulda ◽  
Michal Duchek ◽  
...  

Nanostructured titanium has become a useful material for biomedical applications such as dental implants. Certain surface properties (grain size, roughness, wettability) are highly expected to promote cell adhesion and osseointegration. The aim of this study was to compare the biocompatibilities of several titanium materials using human osteoblast cell line hFOB 1.19. Eight different types of specimens were examined: machined commercially pure grade 2 (cpTi2) and 4 (cpTi4) titanium, nanostructured titanium of the same grades (nTi2, nTi4), and corresponding specimens with laser-treated surfaces (cpTi2L, cpTi4L, nTi2L, nTi4L). Their surface topography was evaluated by means of scanning electron microscopy. Surface roughness was measured using a mechanical contact profilometer. Specimens with laser-treated surfaces had significantly higher surface roughness. Wettability was measured by the drop contact angle method. Nanostructured samples had significantly higher wettability. Cell proliferation after 48 hours from plating was assessed by viability and proliferation assay. The highest proliferation of osteoblasts was found in nTi4 specimens. The analysis of cell proliferation revealed a difference between machined and laser-treated specimens. The mean proliferation was lower on the laser-treated titanium materials. Although plain laser treatment increases surface roughness and wettability, it does not seem to lead to improved biocompatibility.


2014 ◽  
Vol 936 ◽  
pp. 663-668 ◽  
Author(s):  
Guo Xin Tan ◽  
Ying Tan ◽  
Cheng Yun Ning ◽  
Lin Zhang ◽  
Lei Zhou ◽  
...  

Gelatin methacrylate (GelMA) hydrogel comprised of modified natural extracellular matrix (ECM) components, making it a potentially attractive material for surface modification. In this paper, we hypothesize that establishing a GelMA hydrogel coating on titanium surface will accelerate osseointegration. Titanium substrates were silanized with 3-Aminopropyltriethoxysilane (APTES), which was treated by alkali-heated treatment firstly. The GelMA hydrogel coating was constructed on the silanized titanium surface by in situ photopolymerization under UV illumination. Adsorption of bovine serum albumin (BSA) onto modifed titanium surfaces was investigated. The results showed that GelMA-coated titanium adsorbed greater amount of protein than other Ti surfaces. The differences in protein adsorption behavior could result in very different initial cellular behavior on GelMA-coated titanium implant surfaces.


Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 51
Author(s):  
Takahiro Shuto ◽  
Yuichi Mine ◽  
Seicho Makihira ◽  
Hiroki Nikawa ◽  
Takanori Wachi ◽  
...  

Fluoride and abrasives in toothpastes may cause corrosion and deterioration of the titanium used for implants and other prostheses. The purpose of this study was to investigate how the presence or absence and types of fluoride and abrasives affected the titanium surface texture. Brushing with toothpastes was performed on pure-titanium discs using an abrasive testing machine. Unprocessed titanium discs without brushing were used as control samples. Surface roughness, color, and gloss of titanium were measured and the differences compared with the control were analyzed. Additionally, titanium surfaces and abrasives in toothpastes were observed using a scanning electron microscope to compare the surface texture of each sample. Some toothpastes (abrasive+) significantly increased the difference in surface roughness, color, and gloss, compared with ultrapure water. Toothpaste (fluoride+/abrasive+) that had many polygonal abrasive particles led to the largest color differences and exhibited notable scratches and a larger number of contaminant- or corrosion-like black spots. In contrast, brushing with toothpaste without fluoride or abrasives (fluoride−/abrasive−) caused little change to the titanium surface. These results suggest that both fluoride and abrasives in toothpaste used for brushing may be factors that affect surface texture and corrosion resistance of titanium.


2020 ◽  
Author(s):  
Zebulon G. Levine ◽  
Sarah C. Potter ◽  
Cassandra M. Joiner ◽  
George Q. Fei ◽  
Behnam Nabet ◽  
...  

AbstractO-GlcNAc transferase (OGT), found in the nucleus and cytoplasm of all mammalian cell types, is essential for cell proliferation. Why OGT is required for cell growth is not known. OGT performs two enzymatic reactions in the same active site. In one, it glycosylates thousands of different proteins, and in the other, it proteolytically cleaves another essential protein involved in gene expression. Deconvoluting OGT’s myriad cellular roles has been challenging because genetic deletion is lethal; complementation methods have not been established. Here, we developed approaches to replace endogenous OGT with separation-of-function variants to investigate the importance of OGT’s enzymatic activities for cell viability. Using genetic complementation, we found that OGT’s glycosyltransferase function is required for cell growth but its protease function is dispensable. We next used complementation to construct a cell line with degron-tagged wild-type OGT. When OGT was degraded to very low levels, cells stopped proliferating but remained viable. Adding back catalytically-inactive OGT rescued growth. Therefore, OGT has an essential noncatalytic role that is necessary for cell proliferation. By developing a method to quantify how OGT’s catalytic and noncatalytic activities affect protein abundance, we found that OGT’s noncatalytic functions often affect different proteins from its catalytic functions. Proteins involved in oxidative phosphorylation and the actin cytoskeleton were especially impacted by the noncatalytic functions. We conclude that OGT integrates both catalytic and noncatalytic functions to control cell physiology.SignificanceMammalian cells contain only one glycosyltransferase, OGT, that operates in the nucleus and cytoplasm rather than the secretory pathway. OGT is required for cell proliferation, but a basic unanswered question is what OGT functions are essential. This question is challenging to address because OGT has thousands of glycosylation substrates, two different enzymatic activities, and a large number of binding partners. Here, by establishing genetic tools to replace endogenous OGT with variants that preserve only a subset of its activities, we show that only a low level of glycosylation activity is required to maintain cell viability; however, cell proliferation requires noncatalytic OGT function(s). The ability to replace OGT with variants provides a path to identifying its essential substrates and binding partners.


Author(s):  
Marzellus Große Holthaus ◽  
Kurosch Rezwan

Different micropatterning techniques were applied to elucidate the potential for cell proliferation studies on calcium phosphate surfaces. Sintered hydroxyapatite (HA) platelets were microstructured by three different techniques: Aerosol jet printing (M3D®), laser ablation and microcontact printing via polydimethylsiloxane (PDMS) stamps. The microstructures were designed as channels between 1000 and 3000 micron in length, 10 to 220 micron in width and 5 to 110 micron in height. An optical profilometer, a Scanning Electron Microscope (SEM) and X-ray diffraction were used to characterize the microstructures. Cell proliferation tests were carried out by incubating the microstructured ceramic samples in complete cell media for a maximum of seven days. Osteoblast-like cells (MG-63) were used for testing. Each sample was immersed in media in which the cells were already seeded. Imaging was performed by SEM and Fluorescence Microscopy. The cells proliferated on all three differently fabricated microstructures. Cell growth was observed in the microchannels as well as on the microchannel walls or spacers. In particular it turned out, that the microtopology can provoke the cells to elongate aligned to the direction of the microchannels. Non-directional growth was observed on non-structured areas. All three differently fabricated hydroxyapatite microstructuring methods seem to be attractive and promising techniques for use in bone cell growth studies. The applied fabrication techniques show many advantages for fundamental research in the field of cell interaction with ceramic microstructures and may exhibit possible methods of structuring implant surfaces.


2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
P. Santiago-Medina ◽  
P. A. Sundaram ◽  
N. Diffoot-Carlo

Titanium and titanium alloys are currently accepted as the gold standard in dental applications. Their excellent biocompatibility has been attributed to the inert titanium surface through the formation of a thin native oxide which has been correlated to the excellent corrosion resistance of this material in body fluids. Whether this titanium oxide layer is essential to the outstanding biocompatibility of titanium surfaces in orthopedic biomaterial applications is still a moot point. To study this critical aspect further, human fetal osteoblasts were cultured on thermally oxidized and microarc oxidized (MAO) surfaces and cell differentiation, a key indicator in bone tissue growth, was quantified by measuring the expression of alkaline phosphatase (ALP) using a commercial assay kit. Cell attachment was similar on all the oxidized surfaces although ALP expression was highest on the oxidized titanium alloy surfaces. Untreated titanium alloy surfaces showed a distinctly lower degree of ALP activity. This indicates that titanium oxide clearly upregulates ALP expression in human fetal osteoblasts and may be a key bioactive factor that causes the excellent biocompatibility of titanium alloys. This result may make it imperative to incorporate titanium oxide in all hard tissue applications involving titanium and other alloys.


Sign in / Sign up

Export Citation Format

Share Document