Mechanism of Twin Formation During the Tetragonal to Orthorhombic Transformation In Yba2Cu3O7-X

1989 ◽  
Vol 169 ◽  
Author(s):  
Mehmet Sarikaya ◽  
Ilhan A. Aksay ◽  
Ryoichl Kikuchi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Growth Mechanism ◽  
Energy Minimization ◽  
Lattice Distortion ◽  
The Other ◽  
Transmission Electron ◽  
Twin Formation ◽  
Minimization Approach ◽  
Elastic Strains

AbstractThe formation of twins in the YBa2Cu3O7‐x system has been studied theoretically on the basis of transmission electron microscopy observations. The shape of the lips of the twinned domains is determined from two elastic strains, one associated with the twin boundary and the other with the lattice distortion at the lip region. The tangent of the angle at the tip which was calculated from the model agrees with experimental observations sufficiently well. The growth mechanism of the twinned domains is analyzed with an energy minimization approach. The similarities of transformation characteristics in this system to those of other systems are briefly discussed.

scholarly journals Synthesize and Characterization of Hollow Boron-Nitride Nanocages

2009 ◽  
Vol 2009 ◽  
pp. 1-4 ◽  
Author(s):  
W. S. Zhang ◽  
J. G. Zheng ◽  
W. F. Li ◽  
D. Y. Geng ◽  
Z. D. Zhang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Boron Nitride ◽  
Growth Mechanism ◽  
Spherical Shape ◽  
Amorphous Boron ◽  
Transmission Electron ◽  
Ammonia Atmosphere

The boron-nitride (BN) nanocages are synthesized by nitrogenation of amorphous boron nanoparticles at 1073 K under nitrogen and ammonia atmosphere. The BN nanocages exhibit a well-crystallized feature with nearly pentagonal or spherical shape, depending on their size. High-resolution transmission electron microscopy studies reveal that they are hollow nanocages. The growth mechanism of the BN nanocages is proposed.

Sporophytes, megaspores, and massulae of Azolla stanleyi from the Paleocene Joffre Bridge locality, Alberta

1994 ◽  
Vol 72 (3) ◽  
pp. 301-308 ◽  
Author(s):  
Georgia L. Hoffman ◽  
Ruth A. Stockey
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Key Words ◽  
Red Deer ◽  
The Other ◽  
Evolutionary Trends ◽  
Reproductive Structures ◽  
Transmission Electron ◽  
New Material

Several hundred vegetative and fertile specimens of Azolla Lam. have been recovered from the Paleocene Paskapoo Formation at the Joffre Bridge locality (Middle Tiffanian (Ti3) age) near Red Deer, Alberta. The spore complexes closely resemble those of the Paleocene A. stanleyi Jain & Hall, and the vegetative material is referred to that species. The specimens are unusually complete in that the remains of the fragile sporophyte are preserved, commonly with reproductive structures in place. Plants reaching up to 2.25 cm in length consist of alternately branched rhizomes bearing alternate, imbricate, sessile leaves. Leaves are ovate with entire margins, papillate surfaces, and a single midvein. Reproductive structures have been examined using light, scanning, and transmission electron microscopy. This new material is compared with the other Paleocene species for which sporophytes are known and discussed in terms of evolutionary trends for the genus. The specimens suggest that most of the vegetative characteristics of modern Azolla species were established by the middle Paleocene. Key words: Azolla, Salviniaceae, megaspore, massula, ultrastructure, Paleocene.

Pollen morphology of Sabinaria magnifica (Cryosophileae, Coryphoideae, Arecaceae)

Phytotaxa ◽  
2015 ◽  
Vol 207 (1) ◽  
pp. 135 ◽  
Author(s):  
Giovanni Raul Bogota ◽  
Carina Hoorn ◽  
Wim Star ◽  
Rob Langelaan ◽  
Hannah Banks ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Light Microscopy ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
The Other ◽  
Transmission Electron ◽  
Palm Species ◽  
Scanning Electron

Sabinaria magnifica is so far the only known species in the recently discovered tropical palm genus Sabinaria (Arecaceae). Here we present a complete description of the pollen morphology of this palm species based on light microscopy (LM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). We also made SEM-based comparisons of Sabinaria with other genera within the tribe Cryosophileae. Pollen grains of Sabinaria magnifica resemble the other genera in the heteropolar, slightly asymmetric monads, and the monosulcate and tectate exine with perforate surface. Nevertheless, there are some clear differences with Thrinax, Chelyocarpus and Cryosophila in terms of aperture and exine. S. magnifica differs from its closest relative, Itaya amicorum, in the exine structure. This study shows that a combination of microscope techniques is essential for the identification of different genera within the Cryosophileae and may also be a necessary when working with other palynologically less distinct palm genera. 

Effects of Dopants on the Nucleation and Growth of NiSi2 on Silicon

1987 ◽  
Vol 94 ◽  
Author(s):  
S. W. Lu ◽  
C. W. Nieh ◽  
J. J. Chu ◽  
L. J. Chen
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Low Temperatures ◽  
Nucleation And Growth ◽  
The Other ◽  
Size Factor ◽  
Atomic Size ◽  
Nickel Thin Films ◽  
Transmission Electron

ABSTRACTThe influences of implantation impurities, including BF2, B, F, As and P on the formation of epitaxial NiSi2 in nickel thin films on ion-implanted silicon have been investigated by transmission electron microscopy.The presence of BF2, B, and F atoms was observed to promote the epitaxial growth of NiSi2 at low temperatures. Little or no effect on the formation of NiSi2 was found in samples implanted with As or P ions.The results indicated that the influences of the implantation impurities are not likely to be electronic in origin. Good correlation, on the other hand, was found between the atomic size factor and resulting stress and NiSi2 epitaxy at low temperatures.

Multiple twinning of diamond synthesized by acetylene flame

2004 ◽  
Vol 219 (8) ◽  
Author(s):  
Sam Ick Son ◽  
Su Jin Chung
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Electron Back Scatter Diffraction ◽  
The Other ◽  
Hrtem Image ◽  
Transmission Electron ◽  
Domain Boundaries ◽  
Multiple Twinning ◽  
Ebsd Method

AbstractThe relation between the domains and domain boundaries of multiple twins of diamond were investigated by the electron back scatter diffraction (EBSD) method and high resolution transmission electron microscopy (HRTEM). Multiple twinned diamonds have two types of icosahedral morphologies. One is an almost perfect icosahedron in which all of the faces are {111} faces. The other is a hollow icosahedron similar to one of the Kepler-Poinsot polyhedrons. The indented negative trigonal faces are formed from the {100} faces of a cube. It was confirmed that the convex edges of the twinned icosahedron corresponded to the Σ3 boundaries, whereas the concave edges were assigned to the Σ9 twin boundary by means of the EBSD analysis.It was confirmed from the HRTEM image that a series of dislocations compensate for the mismatching angle which occurs after five successive twinning.

Phase Analysis of the Precipitates in an Alloy 600/182 Weld

2007 ◽  
Vol 119 ◽  
pp. 111-114 ◽  
Author(s):  
Yun Soo Lim ◽  
Hong Pyo Kim ◽  
Man Kyo Jung ◽  
Joung Soo Kim
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Boundaries ◽  
Phase Analysis ◽  
Fusion Zone ◽  
Base Metal ◽  
The Other ◽  
Alloy 600 ◽  
Other Hand ◽  
Transmission Electron

The precipitates in the base metal and the fusion zone of an Alloy 600/182 weld were characterized through a transmission electron microscopy. Precipitates in the Alloy 600 base metal were identified as Cr7C3. On the other hand, (Nb,Ti)C, Al-rich and Ti-rich oxides were found on the dendritic interfaces, and tiny Cr-rich M23C6 were distributed on the grain boundaries in the Alloy 182 fusion zone.

Characterization and Growth Mechanism of B12As2 Epitaxial Layers Grown on (1-100) 15R-SiC

2008 ◽  
Vol 1069 ◽  
Author(s):  
Hui Chen ◽  
Guan Wang ◽  
Michael Dudley ◽  
Zhou Xu ◽  
James. H. Edgar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Growth Mechanism ◽  
Heteroepitaxial Growth ◽  
High Quality ◽  
X Ray ◽  
Transmission Electron ◽  
Substrate Choice

ABSTRACTA systematic study is presented of the heteroepitaxial growth of B12As2 on m-plane 15R-SiC. In contrast to previous studies of B12As2 on other substrates, including (100) Si, (110) Si, (111) Si and (0001) 6H-SiC, single crystalline and untwinned B12As2 was achieved on m-plane 15R-SiC. Observations of IBA on m-plane (1100)15R-SiC by synchrotron white beam x-ray topography (SWBXT) and high resolution transmission electron microscopy (HRTEM) confirm the good quality of the films on the 15R-SiC substrates. The growth mechanism of IBA on m-plane 15R-SiC is discussed. This work demonstrates that m-plane 15R-SiC is potentially a good substrate choice to grow high quality B12As2 epilayers.

Formation of Oxide Nanotubes and Bamboo-Like Structures via Oxidation of Cu, Fe and Ni Nanowires

2010 ◽  
Vol 658 ◽  
pp. 232-235
Author(s):  
Gen Matsubayashi ◽  
Ryusuke Nakamura ◽  
Hiroaki Tsuchiya ◽  
Shinji Fujimoto ◽  
Hideo Nakajima
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Metal Ions ◽  
Formation Process ◽  
Oxidation Reaction ◽  
The Other ◽  
Metal Oxidation ◽  
Outward Diffusion ◽  
Transmission Electron ◽  
Uniform Diameter

The formation process of oxide nanotube via metal oxidation reaction was studied by transmission electron microscopy for Cu, Fe, and Ni nanowires. Cu2O and Fe3O4 nanotubes were formed after the oxidation of Cu and Fe nanowires with a diameter of 55 nm in air at 423 and 573 K for 3.6 ks, respectively. Both Cu2O and Fe3O4 nanotubes had a cylindrical interior pore with uniform diameter. On the other hand, Ni nanowires became bamboo-like structures of NiO with separate interior pores after oxidation at 673 K for 7.2 ks. The formation of the interior pores in Cu2O and Fe3O4 nanotubes and NiO bamboo-like structures can be explained by the rapid outward diffusion of metal ions through the oxide layers and the clustering of excess vacancies.

scholarly journals The Effect of Molybdenum on Precipitation Behaviour in Austenitic Strip-Cast Steels Containing Niobium

2020 ◽  
Author(s):  
Lu Jiang ◽  
Ross Marceau ◽  
Thomas Dorin ◽  
Huaying Yin ◽  
Xinjun Sun ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Energy Barrier ◽  
The Other ◽  
Transmission Electron ◽  
Cast Steels ◽  
Precipitation Behaviour ◽  
Strip Cast ◽  
Electron Energy Loss

Two low-C steels microalloyed with Nb were fabricated by simulated strip casting, one with Mo and the other without Mo. Both alloys were coiled at 900 °C to investigate the effect of Mo on the precipitation behaviour in austenite in low-C strip-cast Nb steels. The mechanical properties results show that during the coiling at 900 °C the hardness of both alloys increases and reaches a peak after 3000 s and then decreased after 10,000 s. Additionally, the hardness of the Mo-containing alloy is higher than that of the Mo-free alloy in all coiling conditions. Thermo-Calc predictions suggest that MC-type carbides exist in equilibrium at 900 °C, which are confirmed by transmission electron microscopy (TEM). TEM examination shows that precipitates are formed after 1000 s of coiling in both alloys and the size of the particles is refined by the addition of Mo. Energy dispersive spectroscopy (EDS) and electron energy loss spectroscopy (EELS) reveal that the carbides are enriched in Nb and N. The presence of Mo is also observed in the particles in the Nb-Mo steel during coiling. The concentration of Mo in the precipitates decreases with increasing particle size and coiling time. The precipitates in the Nb-Mo steel provide significant strengthening increments of up to 140 MPa, much higher than that in the Nb steel, ~ 96 MPa. A thermodynamic rationale is given, which explains that the enrichment of Mo in the precipitates reduces the interfacial energy between precipitates and matrix. This is likely to lower the energy barrier for their nucleation and also reduce the coarsening rate, thus leading to finer precipitates during coiling at 900 °C.

scholarly journals Growth Mechanism of Periodic-Structured MoS2 by Transmission Electron Microscopy

Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 135
Author(s):  
Arvind Mukundan ◽  
Yu-Ming Tsao ◽  
Sofya B. Artemkina ◽  
Vladimir E. Fedorov ◽  
Hsiang-Chen Wang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Growth Mechanism ◽  
Large Scale ◽  
Periodic Structures ◽  
Chemical Vapor ◽  
Composition Analysis ◽  
Transmission Electron ◽  
Growth Phenomenon ◽  
Periodic Growth

Molybdenum disulfide (MoS2) was grown on a laser-processed periodic-hole sapphire substrate through chemical vapor deposition. The main purpose was to investigate the mechanism of MoS2 growth in substrate with a periodic structure. By controlling the amount and position of the precursor, adjusting the growth temperature and time, and setting the flow rate of argon gas, MoS2 grew in the region of the periodic holes. A series of various growth layer analyses of MoS2 were then confirmed by Raman spectroscopy, photoluminescence spectroscopy, and atomic force microscopy. Finally, the growth mechanism was studied by transmission electron microscopy (TEM). The experimental results show that in the appropriate environment, MoS2 can be successfully grown on substrate with periodic holes, and the number of growth layers can be determined through measurements. By observing the growth mechanism, composition analysis, and selected area electron diffraction diagram by TEM, we comprehensively understand the growth phenomenon. The results of this research can serve as a reference for the large-scale periodic growth of MoS2. The production of periodic structures by laser drilling is advantageous, as it is relatively simpler than other methods.

Sign in / Sign up

Export Citation Format

Share Document