scholarly journals Productive performance and industrial quality of wheat genotypes grown in two environments

2016 ◽  
Vol 20 (9) ◽  
pp. 856-861
Author(s):  
Omar Possatto Junior ◽  
Marcos V. Faria ◽  
Marcelo C. Mendes ◽  
Evandrei S. Rossi ◽  
Rodrigo Oliboni ◽  
...  
Keyword(s):  
Sodium Dodecyl ◽  
Wheat Breeding ◽  
Productive Performance ◽  
Thousand Grain Weight ◽  
Flour Protein ◽  
Commercial Cultivars ◽  
Protein Flour ◽  
Grain Yield Components ◽  
Selection Of

ABSTRACT Wheat flour can be allocated for manufacturing various products, but each purpose requires specificities defined by the industrial quality. The objective of this study was to evaluate the performance of experimental lines and commercial cultivars of wheat, in South and Southeast of Brazil and to identify genotypes with favorable characteristics of industrial quality. Twenty lines in the stage of cultivation and use and three commercial cultivars were evaluated for grain yield components (hectoliter weight and thousand-grain weight) and features related to the industrial quality of the flour (protein, flour stability, sedimentation with sodium dodecyl sulfate and color). The genotypes CRX/CD104//ALC, LAJ96010/JSP//ALC and CRX/ALC//ALC showed favorable characteristics for biscuit production, while the genotypes ORL97061/ORL00241//CD104, SUZ6/WEAVER//TUI/3/SUP/4/CD104, ORL99396/ORL97061//SUP, CRX/CD104//ALC, ORL98231/IOR00131//ÔNIX, ORL94346/ALC//AVT/3/ÔNIX, CEP0033/ÔNIX/3/ÔNIX*2//TC14/2*SPEAR, Campo Real/VAN//ÔNIX, ORL97061/CD 104 and PMP/ORL98231//CRX have aptitude for baking. The evaluations were efficient for the classification and selection of genotypes in the wheat breeding program.

scholarly journals Competition of onion genotypes in the soil and climatic conditions of Guarapuava, State of Paraná

2021 ◽  
Vol 43 ◽  
pp. e53105
Author(s):  
Marcela Padilha Iastremski ◽  
Juliano Tadeu Vilela de Resende ◽  
Cristhiano Kopanski Camargo ◽  
Marcos Guilherme Ruthes ◽  
Marco Antonio Pereira Santos
Keyword(s):  
Experimental Design ◽  
Climatic Conditions ◽  
Early Flowering ◽  
Agronomic Performance ◽  
Productive Performance ◽  
Yield And Quality ◽  
Experimental Area ◽  
Commercial Cultivars ◽  
Total Productivity

The use of genotypes more adapted to climatic conditions can contribute to increase the yield of onion producers. The goal of this study was to evaluate the agronomic performance of 15 onion genotypes in the soil and climatic conditions of Guarapuava, state of Paraná. The study was conducted in the experimental area of Horticulture, Cedeteg campus, Universidade Estadual do Centro-Oeste (UNICENTRO), Guarapuava, state of Paraná, Brazil, from July to November 2018. The experimental design used was randomized blocks, with four replications, and the treatments consisted of four commercial cultivars Optima F1, Bella Dura, Sirius F1, Soberana F1 and eleven experimental genotypes N1, N2, N3, N4, N5, N6, N7, N8, N9, AF4241 and AF4243. Biometric characteristics of the plants, production components and early flowering were evaluated. Plants presented between 6 and 9 leaves, in which N1, N3, N4 and N6 had less than 7 leaves, differing statistically from the others. The cultivar Optima F1 and the genotypes N2, N3, N5, N6, N7 and N8 presented the tallest plants, with 66.1 to 76.0 cm. The pseudostem diameter did not differ significantly between genotypes, showing values between 15.2 and 20.4 mm. Total productivity was higher in genotypes N2, N6, N5, N4, N3, N7 with values from 43.6 to 50.3 t ha-1. The highest average bulb mass was found in N2, N4, N6, Sirius F1, Optima F1 and Soberana F1, with 74.2 to 91.1 g bulb-1. Regarding the commercial classification, the genotypes N2, N4, N5, N6 and the cultivars Sirius F1 and Soberana F1 presented more than 50% bulbs of classes 3+3C+4. Early flowering did not occur in any of the analyzed genotypes. The use of cultivars with high productive performance and adapted to climatic conditions, when handled properly, can result in greater yield and quality of bulbs.

F3 response to F2 selection for quality and its effect on F3 yield distribution

1989 ◽  
Vol 40 (1) ◽  
pp. 33 ◽  
Author(s):  
L O'Brien ◽  
JF Panozzo ◽  
JA Ronalds
Keyword(s):  
Protein Content ◽  
Sodium Dodecyl ◽  
Negative Relationship ◽  
Wheat Breeding ◽  
Small Scale ◽  
Dough Strength ◽  
Fermentation Time ◽  
Yield Distribution ◽  
Flour Protein ◽  
Sedimentation Volume

Seed of F2 single plant selections from two crosses was evaluated using a number of small-scale quality tests.F2 quality test values were significantly correlated with farinograph and extensograph properties in the F3, but no one test was correlated with all of the physical dough measures. The Pelshenke time and the proportion of residue protein were the small-scale measures most consistently correlated with dough strength (farinograph dough breakdown and extensograph maximum resistance) in the F3 and between the F2 and F3 generations.Applications of independent culling in the F2 for each test did not alter the subsequent nature of the F3 yield distribution except for flour protein content and Zeleny volume, where there was a preferential loss of lines from the higher yielding end. This resulted from the negative correlations between flour protein content and yield, both within the F3 (r=-0.66**) and between the F2 and F3 (r= -0-44**). The negative relationship between grain yield and Zeleny volume was due to the effect of protein content on Zeleny volume.Application of quality testing regimes that estimated grain hardness, protein content and dough strength in the F2 did not adversely affect the nature of the F3 yield distribution, yet permitted up to 71% of the population to be removed because of unsatisfactory balance of quality attributes. These results have considerable implications for the planning of wheat breeding programmes.Additional keywords: Bread wheat (Triticum aestivum L.), sodium dodecyl sulfate sedimentation volume, Zeleny sedimentation volume, Pelshenke wheatmeal fermentation time, residue protein content.

scholarly journals The bread making quality of Finnish spring wheats - a proposal for classification

1993 ◽  
Vol 2 (6) ◽  
pp. 507-515
Author(s):  
Jari Peltonen ◽  
Tapio Juutti ◽  
Juha Suopelto
Keyword(s):  
Quality Criteria ◽  
Triticum Aestivum L ◽  
Wheat Breeding ◽  
Bread Making ◽  
High Class ◽  
Dough Quality ◽  
Flour Protein ◽  
Class 1 ◽  
Very High

The purpose of the present study was to provide bread making quality criteria for spring wheat (Triticum aestivum L.) grown in Finland. The bread making quality of a total of 101 wheat samples was related to flour protein concentration and dough quality determined by the farinograph valorimeter value. Nine quality classes of wheat, similar to the German system of wheat classification, were used as a basis. Because Finnish wheat breeding and cultivation primarily aim at producing grain for bread making, it was not considered necessary to define the quality classes of wheat unsuitable for bread making. Therefore, the number of quality classes were restricted to five: (class 1) medium, (class 2) medium to high, (class 3) high, (class 4) high to very high, and (class 5) very high baking quality. The influence of the environment on the quality traits should be taken into account by comparing the cultivars with a representative control cultivar.

ON THE EXPERT’S RIGHT TO BE PRESENT AT LEGAL PROCEEDINGS

2016 ◽  
Vol 15 ◽  
pp. 163-171
Author(s):  
M. G. Shcherbakovskiy
Keyword(s):  
Initial Data ◽  
Legal Proceedings ◽  
Reliable Assessment ◽  
Data Acquiring ◽  
Selection Of

The article discusses the reasonsfor an expert to participate in legal proceedings. The gnoseological reason for that consists of the bad quality of materials subject to examination that renders the examination either completely impossible or compromises objective, reasoned and reliable assessment of the findings. The procedural reason consists ofa proscription for an expert to collect evidence himself or herself. The author investigates into the ways of how an expert can participate in legal proceedings. If the defense invites an expert to participate in the proceedings, then it is recommended that his or her involvement should be in the presence of attesting witnesses and recorded in the protocol. In the course of the legal proceedings an expert has the following tasks: adding initial data, acquiring new initial data, understanding the situation of the incident, acquiring new objects to be studied, including samples for examination. An expert’s participation in legal proceedings differs from the participation of a specialist or an examination on the scene of the incident. The author describes the tasks that an expert solves in the course of legal proceedings, the peculiarities ofan investigation experiment practices, the selection of samples for an examination, inspection, interrogation.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

DESIGN, SIMULATION AND IMPLEMENTATION MONITORING SYSTEM FOR SYSTEM CONTROL C4 FEEDING PUMP FOR FEED VAPORIZATION IN THE BUTADIENE PLANT

2020 ◽  
Vol 1 (1) ◽  
pp. 31-35
Author(s):  
Fahmi Yunistyawan ◽  
Yunistyawan J Berchmans ◽  
Gembong Baskoro
Keyword(s):  
Motor Control ◽  
Control System ◽  
Field Operator ◽  
System Control ◽  
Variable Speed ◽  
Variable Speed Drive ◽  
Software And Hardware ◽  
Discharge Pressure ◽  
Selection Of

This study implements the auto start control system on an electric motor 3 phase C4Feeding pump when the discharge pressure is low-low (4.3 kg /cm²). The C4 feeding pumpmotor was initially manually operated from the local control station, this was very ineffectiveand inefficient because it still relied on the field operator to operate the pump motor and whenthe plant was in normal operating it is very risk if the field operator late to operate motor then itwill impact to quality of the product, and if the delay time to operate motor is too long then planthave to shut down, therefore improvement is needed in the C4 feeding pump motor controlsystem. In this paper, various types of 3-phase motor control are explained which allow it to beapplied to the C4 feeding pump motor that are on-off, inverter, and variable speed drive andefficient selection of the three systems control of the motor. Software and hardware used in thisthesis work are DCS CENTUM VP Yokogawa.

Thomas More’s Correspondence in a Spanish Ambiance

Moreana ◽  
2002 ◽  
Vol 39 (Number 149) (1) ◽  
pp. 41-60 ◽  
Author(s):  
Eugenio M. Olivares Merino
Keyword(s):  
The Subject ◽  
Selection Of

The recent reprinting of Álvaro de Silva’s 1998 edition of a selection of More’s letters prompts the author to examine the subject of Spanish translations of More, and of de Silva’s general commentary on More’s correspondence and on his relationship to other humanists. The author reflects on aspects of More’s personality as exposed in his letters and uses what he finds as a corrective to several biographical misconceptions. He points out the strengths and weaknesses of de Silva’s work and compares it with that of other translators, particularly Elizabeth Rogers, and notes the particularly Spanish quality of de Silva’s edition.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Spatial Autocorrelation in the Study of Neighbourhoods towards Smart Cities: Empirical Evidence from Kerman, Iran

2012 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Asra Hosseini
Keyword(s):  
Spatial Autocorrelation ◽  
Urban Areas ◽  
Smart Cities ◽  
Moran’S I ◽  
Moran's I ◽  
Urban Planner ◽  
Universal Feature ◽  
Autocorrelation Method ◽  
Selection Of

From earliest cities to the present, spatial division into residential zones and neighbourhoods is the universal feature of urban areas. This study explored issue of measuring neighbourhoods through spatial autocorrelation method based on Moran's I index in respect of achieving to best neighbourhoods' model for forming cities smarter. The research carried out by selection of 35 neighbourhoods only within central part of traditional city of Kerman in Iran. The results illustrate, 75% of neighbourhoods' area in the inner city of Kerman had clustered pattern, and it shows reduction in Moran's index is associated with disproportional distribution of density and increasing in Moran's I and Z-score have monotonic relation with more dense areas and clustered pattern. It may be more efficient for urban planner to focus on spatial autocorrelation to foster neighbourhood cohesion rather than emphasis on suburban area. It is recommended characteristics of historic neighbourhoods can be successfully linked to redevelopment plans toward making city smarter, and also people's quality of life can be related to the way that neighbourhoods' patterns are defined. 

Sign in / Sign up

Export Citation Format

Share Document