scholarly journals Hierarchical and optimization methods for the characterization of tomato genotypes

2019 ◽  
Vol 23 (1) ◽  
pp. 27-32 ◽  
Author(s):  
Joicy V. M. Peixoto ◽  
Rafaela S. de Almeida ◽  
Jaine P. R. da Rocha ◽  
Gabriel M. Maciel ◽  
Nádya C. Santos ◽  
...  
Keyword(s):  
Block Design ◽  
Interspecific Cross ◽  
Optimization Methods ◽  
Leaf Miner ◽  
Wild Accession ◽  
Recurrent Parent ◽  
Commercial Line ◽  
Different Levels ◽  
Tomato Genotypes

ABSTRACT The correct characterization of germplasm banks is fundamental for breeders to succeed in breeding programs. Several studies have sought to obtain genotypes with resistance to pests. However, there is no consensus about which methodology is the most appropriate to characterize a germplasm bank of tomato with different levels of resistance to pests. The objective of this study was to compare methods of multivariate analysis for the evaluation of genetic diversity in tomato genotypes with different levels of resistance to pests. The experiments were conducted at the Vegetable Experimental Station of the Federal University of Uberlândia - Monte Carmelo campus (18º 42’ 43.19” South latitude and 47º 29’ 55.8” West longitude, 873 m altitude), in the period from April 2013 to November 2016. Sixteen genotypes were evaluated from the interspecific cross between LA-716 (S. pennellii) versus pre-commercial line (UFU-057) followed by backcrossing and self-fertilization, along with the pre-commercial line UFU-057 (recurrent parent) Santa Clara and the wild accession S. pennellii (donor genitor). The contents of acylsugar, foliar trichomes, South American tomato pinworm and leaf miner repellency tests were analyzed. The experimental design was the randomized block design totaling 76 plots (19 genotypes x 4 blocks). It was concluded that there was genetic variability among the evaluated genotypes. The method of graphic dispersion by principal components revealed a greater power of discrimination. Genotypes UFU-057F2RC27#4.3, UFU-057F2RC28#2.2 and UFU-057F2RC27#4.7 contain the highest levels of acylsugar, resistance to Liriomyza spp. and T. absoluta.

scholarly journals Characterization of tomato accessions for resistance to early blight

2011 ◽  
Vol 11 (2) ◽  
pp. 174-180 ◽  
Author(s):  
José Fernando Jurca Grigolli ◽  
Mirian Maristela Kubota ◽  
Daniel Pedrosa Alves ◽  
Gabriel Belfort Rodrigues ◽  
Carine Rezende Cardoso ◽  
...  
Keyword(s):  
Early Blight ◽  
Block Design ◽  
Research Field ◽  
Diseased Leaf ◽  
Breeding Programs ◽  
Progress Curve ◽  
Randomized Block Design ◽  
Diseased Leaf Area ◽  
Tomato Genotypes

The purpose of this study was to characterize 50 tomato genotypes of the Vegetable Genebank of the Federal University of Viçosa. They were evaluated together with the controls Débora, Fanny and Santa Clara, in a randomized block design with two replications. The experiment was conducted in a research field of the UFV, from February to May 2007. We evaluated the disease severity, which is the percentage of diseased leaf area. The severity values were transformed into area under the disease progress curve (AUDPC), improving the result visualization. The analysis of variance and grouping of AUDPC means by the Scott-Knott test at 5 % significance were performed. The accessions BGH-2081, BGH-2034, BGH-700, BGH-2057, BGH-2035, BGH-2054, BGH-2018, BGH-2065, BGH-2008, and BGH-2032 had a lower mean AUDPC than the controls and are therefore indicated for future breeding programs.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

scholarly journals Simultaneous determination of various platycosides in Four Platycodon grandiflorum cultivars by UPLC-QTOF/MS

2019 ◽  
Vol 62 (1) ◽  
Author(s):  
Dae Young Lee ◽  
Bo-Ram Choi ◽  
Jae Won Lee ◽  
Yurry Um ◽  
Dahye Yoon ◽  
...  
Keyword(s):  
Principal Component ◽  
Ultra Performance Liquid Chromatography ◽  
Platycodon Grandiflorum ◽  
Pentacyclic Triterpenoid ◽  
Flight Mass Spectrometry ◽  
Platycodi Radix ◽  
Isomeric Pairs ◽  
Different Levels

Abstract In Platycodi Radix (root of Platycodon grandiflorum), there are a number of platycosides that consist of a pentacyclic triterpenoid aglycone and two sugar moieties. Due to the pharmacological activities of platycosides, it is critical to assess their contents in PR, and develop an effective method to profile various platycosides is required. In this study, an analytical method based on ultra performance liquid chromatography coupled with quadrupole time-of-flight/mass spectrometry (UPLC-QTOF/MS) with an in-house library was developed and applied to profile various platycosides from four different Platycodi Radix cultivars. As a result, platycosides, including six isomeric pairs, were successfully analyzed in the PRs. In the principal component analysis, several platycosides were represented as main variables to differentiate the four Platycodi Radix cultivars. Their different levels of platycosides were also represented by relative quantification. Finally, this study indicated the proposed method based on the UPLC-QTOF/MS can be an effective tool for identifying the detail characterization of various platycosides in the Platycodi Radix.

scholarly journals Spectral Decomposition of the Flow and Characterization of the Sound Signals through Stenoses with Different Levels of Severity

2021 ◽  
Vol 8 (3) ◽  
pp. 41
Author(s):  
Fardin Khalili ◽  
Peshala T. Gamage ◽  
Amirtahà Taebi ◽  
Mark E. Johnson ◽  
Randal B. Roberts ◽  
...  
Keyword(s):  
Pressure Fluctuations ◽  
High Energy ◽  
Sound Sources ◽  
Severity Level ◽  
Non Invasive ◽  
Flow Through ◽  
Severity Of The Disease ◽  
Proper Orthogonal ◽  
Different Levels

Treatments of atherosclerosis depend on the severity of the disease at the diagnosis time. Non-invasive diagnosis techniques, capable of detecting stenosis at early stages, are essential to reduce associated costs and mortality rates. We used computational fluid dynamics and acoustics analysis to extensively investigate the sound sources arising from high-turbulent fluctuating flow through stenosis. The frequency spectral analysis and proper orthogonal decomposition unveiled the frequency contents of the fluctuations for different severities and decomposed the flow into several frequency bandwidths. Results showed that high-intensity turbulent pressure fluctuations appeared inside the stenosis for severities above 70%, concentrated at plaque surface, and immediately in the post-stenotic region. Analysis of these fluctuations with the progression of the stenosis indicated that (a) there was a distinct break frequency for each severity level, ranging from 40 to 230 Hz, (b) acoustic spatial-frequency maps demonstrated the variation of the frequency content with respect to the distance from the stenosis, and (c) high-energy, high-frequency fluctuations existed inside the stenosis only for severe cases. This information can be essential for predicting the severity level of progressive stenosis, comprehending the nature of the sound sources, and determining the location of the stenosis with respect to the point of measurements.

Efficacy of Different Level of Systemic Fungicides on Management of Rice Blast at Baitadi, Nepal

2020 ◽  
Vol 7 ◽  
pp. 33-42
Author(s):  
Ashok Acharya ◽  
Prabin Ghimire ◽  
Dhurba Raj Joshi ◽  
Kishor Shrestha ◽  
Govinda Sijapati ◽  
...  
Keyword(s):  
Disease Severity ◽  
Rice Blast ◽  
Fungal Pathogens ◽  
Block Design ◽  
Rice Variety ◽  
Disease Suppression ◽  
Systemic Fungicide ◽  
Disease Development ◽  
Systemic Fungicides ◽  
Different Levels

Rice blast (Pyriculariaoryzae Cavara) is one of the most devastating diseases affecting the rice crop in across the world. Systemic fungicides are used for the suppression of blast diseases caused by fungal pathogens. Propiconazole and Carbendazim are commercial chemical control products available in markets for the control of the fungal pathogen. An experiment was conducted to examine the effectiveness of systemic fungicide on suppression of rice blast incidence in farmers' field during wet seasons in 2016. The treatments consisted of the use of different levels of propiconazole and Carbendazim on ‘Rato Basmati’ a landrace rice variety. The experiments were arranged in a randomized complete block design with three replications. The disease was scored according to the standard scale developed by the International Rice Research Institute (IRRI). Disease severity and Area under Disease Progressive curve (AUDPC) was computed based on that scale score. Propiconazole and Carbendazim at different levels reduce disease development than no treatment (control). But its efficacy was not consistent. The magnitude of disease suppression by Propiconazole was high as compared to Carbendazim. The application of propiconazole at the rate of 1.5 ml effectively reduced disease severity and AUDPC at different dates. So propiconazole at the rate of 1.5 ml thrice at weekly intervals is effective to reduce the disease development

Response of Groundnut (Arachis hypogaea L.) to Different Levels and Time of Phosphogypsum Nutrition

2021 ◽  
Author(s):  
Sheri Vaishnav ◽  
M.R. Ananda ◽  
H.M. Atheekur Rehaman ◽  
C. Seenappa ◽  
H.C. Prakasha
Keyword(s):  
Arachis Hypogaea ◽  
Block Design ◽  
Additional Source ◽  
Yield Attributes ◽  
Oilseed Crops ◽  
Sulphur Nutrition ◽  
Arachis Hypogaea L ◽  
Field Unit ◽  
Different Levels ◽  
Sulphur Uptake

Background: Groundnut is one of the most important oilseed crops of India. Improving productivity of groundnut to meet the domestic vegetable oil demand through balanced fertilization is the prime challenge lying before the agronomists in the country. With the aim of evaluating phosphogypsum as a source of sulphur nutrition in groundnut, a field experiment entitled “Response of groundnut (Arachis hypogaea L.) to different levels and time of phosphogypsum nutrition” was conducted at Agronomy field unit, University of Agricultural Sciences Bangalore, during kharif-2019. Methods: Experiment was laid out in randomised complete block design (RCBD) with eleven treatments, of which eight have different combinations of phosphogypsum applied as basal and in split (30 DAS) and one with gypsum as basal alone. Whereas, the remaining two treatments, without any additional source of sulphur are included for comparison. Result: Among eleven treatments, application of phosphogypsum @ 125 kg S eq ha-1 in split recorded highest yield attributes, pod yield (2063 kg ha-1), kernel yield (1418 kg ha-1) and sulphur uptake (11.33 kg ha-1). Which were on par with 100 kg S eq ha-1 in split (2014, 1380 and 10.39 kg ha-1, respectively). All other treatments recorded lower values with lowest in treatments without any additional sulphur source.

Johanna Seibt’s Process Ontology of Categorical Inference: On Nomological Axiomatics and Category Projection

Metaphysica ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ekin Erkan
Keyword(s):  
Limit Point ◽  
Formal Structure ◽  
Empirical Science ◽  
Semantic Structure ◽  
Structural Level ◽  
Process Ontology ◽  
Representational System ◽  
Cognitive Hierarchy ◽  
Different Levels

Abstract Drawing from a Sellarsian realist-naturalist epistemology, we trace different levels of cognitive hierarchy procedures through which a representational system learns to update its own states and improve its ‘map-making’ capabilities from pre-conscious operations which modulate base-localization functions, to patterns of epistemic revision and integration at the conceptual and theoretical levels, producing a nomological double of its world. We show how ontological theorization becomes diachronically coordinated with and constrained by empirical science, and how the formal-quantitative kernel of scientific theories corresponds to qualitative-conceptual determinations at the structural level. Following Johanna Seibt’s characterization of ontology as a theory of categorial inference, we trace the preservation of inferential semantic structure across ontological theories in relation to model languages and provide provisional indications to coordinate Seibt’s account with a convergent realist assessment of systematic modeling, defining the epistemological conditions for articulating the preservation of formal structure in theories toward a limit-point of enquiry.

Phenotypic and genotypic characterization of tomato genotypes for resistance to root-knot nematode, Meloidogyne incognita

2020 ◽  
Vol 100 (1) ◽  
pp. 28
Author(s):  
Anupam ◽  
Narpinderjeet Kaur Dhillon ◽  
Sukhjeet Kaur ◽  
Salesh Kumar Jindal ◽  
Harwinder Singh Buttar
Keyword(s):  
Meloidogyne Incognita ◽  
Root Knot Nematode ◽  
Genotypic Characterization ◽  
Tomato Genotypes ◽  
Phenotypic And Genotypic Characterization

scholarly journals Different levels of shade on population of grasshoppers and its oviposition preference on heliconias

2018 ◽  
Vol 48 (2) ◽  
Author(s):  
Ana Cristina Bittar ◽  
Elen de Lima Aguiar-Menezes ◽  
José Guilherme Marinho Guerra ◽  
Janaína Ribeiro Costa Rouws ◽  
Luiz Augusto de Aguiar ◽  
...  
Keyword(s):  
Block Design ◽  
Oviposition Preference ◽  
Production Parameters ◽  
Lateral Buds ◽  
Randomized Block Design ◽  
Light Requirements ◽  
Four Levels ◽  
Preferred Species ◽  
Different Levels

ABSTRACT: Grasshoppers of the families Acrididae and Romaleidae (Orthoptera) are among the insects that defoliate heliconias and have been gaining status as pests of commercial crops of these plants in Brazil. The objectives of the present study were to identify the grasshopper defoliating heliconias in the municipality of Santo Antônio de Pádua, RJ (Brazil), to evaluate the effect of different levels of shade on the population of this grasshopper and the production parameters of heliconias, and to determine if this grasshopper has an oviposition preference among the heliconias evaluated. The experiment was in a completely randomized block design, in subdivided plots (four levels of shade in the plot, 0%, 30%, 50% and 80%, and four species of Heliconia: H. psittacorum, H. stricta, H. wagneriana and H. psittacorum x H. spathocircinata ‘Golden Torch’ in the subplot), with four replications. The grasshopper was identified as Cornops frenatum frenatum (Acrididae). An increase in shade resulted in a decrease in the number of oviposition holes from the grasshopper and the number of lateral buds. Shade did not influence the number of C. f. frenatum nymphs and adults and the number of flower stems. H. wagneriana was the most preferred species for oviposition by C. f. frenatum. Results suggested using screens to shade heliconia plants can help control C. f. frenatum populations, however, the light requirements of the heliconias should be considered to guarantee productivity.

Torsional characterization of ropes used offshore

2008 ◽  
Vol 43 (2) ◽  
pp. 121-139 ◽  
Author(s):  
I M L Ridge
Keyword(s):  
Experimental Data ◽  
Torsional Response ◽  
In Series ◽  
Different Levels

The first part of this paper presents a general discussion of the various problems which must be addressed when combining different ropes in series or, in some cases, in using a rope in conditions where it is rotationally unrestrained. The paper will pay particular attention to the various classes of rope used in the offshore environment and their main torsional characteristics. In the second part, equipment is shown which is suitable for the measurement of the torsional response of various rope constructions at different levels of twist. Experimental data are presented for a variety of rope constructions at sizes comparable with those used in offshore applications. Comparison is made with data obtained in similar previous studies but with smaller‐diameter ropes.

Sign in / Sign up

Export Citation Format

Share Document