scholarly journals Second-crop cowpea under residual phosphorus doses in the Brazilian Amazon

2020 ◽  
Vol 50 ◽  
Author(s):  
Rubson da Costa Leite ◽  
Robson da Costa Leite ◽  
Manoel da Silva Cravo
Keyword(s):  
Experimental Design ◽  
Grain Yield ◽  
Vigna Unguiculata ◽  
Agricultural Production ◽  
Brazilian Amazon ◽  
Available Phosphorus ◽  
Residual P ◽  
Residual Phosphorus ◽  
Low Levels ◽  
Crop System

ABSTRACT The southeastern mesoregion of the Brazilian Pará state is an important soybean producer, and the second-crop system can increase the local agricultural production. However, Latosols with medium to very clayey texture predominate in the region and, despite being suitable for farming, they naturally have low levels of available phosphorus (P). This study aimed to evaluate the yield of second-crop cowpea [Vigna unguiculata (L.) Walp] under doses of residual P in a Yellow-Latosol. Two experiments were installed under field conditions. The experimental design was randomized blocks, with five treatments (residuals of 0, 50, 100, 150 and 200 kg ha-1 of P2O5) and four replications. The first experiment consisted of cultivating second-crop cowpea after the soybean harvest, with phosphate doses provided during the soybean planting, and the second of second-crop cowpea after the rice harvest, with phosphate doses provided during the rice planting. The 1,000-grain weight and production of pods, husks and grains were evaluated. The production of pods and husks were higher in the area with residual P. The highest yield was obtained in the residual dose of 200 kg ha-1 of P2O5, reaching a grain yield of 1,256 kg ha-1 after the soybean harvest and 885 kg ha-1 after the rice harvest.

scholarly journals Correlations and path analysis of yield components in cowpea

2014 ◽  
Vol 14 (2) ◽  
pp. 82-87 ◽  
Author(s):  
Adriano dos Santos ◽  
Gessí Ceccon ◽  
Livia Maria Chamma Davide ◽  
Agenor Martinho Correa ◽  
Valdecir Batista Alves
Keyword(s):  
Experimental Design ◽  
Grain Yield ◽  
Vigna Unguiculata ◽  
Indirect Effects ◽  
Yield Components ◽  
Indirect Selection ◽  
Direct And Indirect Effects ◽  
Genotypic And Phenotypic Correlations ◽  
Selection Of ◽  
Multiple Character

Obtaining correlations and direct and indirect effects of yield components is important for the selection of promising parental and segregating populations. The objective of this research was to estimate the genotypic and phenotypic correlations, and to analyze the direct and indirect effects of yield components on grain yield in 20 cowpea (Vigna unguiculata) genotypes. The experimental design was in randomized blocks with 20 treatments and 4 replications. The character showed low to moderate possibility of gain from indirect selection, with greater possibility for success when joining multiple character and a genotype of better performance.

scholarly journals Water Use Efficiencies of Different Maturity Group Soybean Cultivars in the Humid Mississippi Delta

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1496
Author(s):  
Srinivasa R. Pinnamaneni ◽  
Saseendran S. Anapalli ◽  
Daniel K. Fisher ◽  
Krishna N. Reddy
Keyword(s):  
Glycine Max ◽  
Water Resources ◽  
Experimental Design ◽  
Grain Yield ◽  
Water Use ◽  
Production System ◽  
Mississippi Delta ◽  
Maturity Group ◽  
Glycine Max L ◽  
Water Use Efficiencies

Introducing alternative cultivars with enhanced water use efficiencies can help alleviate pressure on groundwater for crop irrigations in Mississippi (MS) Delta. A two-year field study was conducted in 2019–2020 to compare the water use efficiencies (WUE) of recently released and pre-released soybean {Glycine max (L.) Merr.} cultivars in maturity group (MG) III (‘P37A78’, ‘LG03-4561-14’), IV (‘Dyna-gro 4516x’, ‘DS25-1, DT97-4290’), and V (‘S12-1362’, ‘S14-16306’) in the MS Delta. The experimental design was a split-plot with cultivar as the first factor and the second factor was water variant irrigation (IR) and no irrigation (RF, rainfed), replicated three times. The MG IV cultivar Dyna-gro 4516x recorded the highest grain yield and WUE: grain yields were 4.58 Mg ha−1 and 3.89 Mg ha−1 under IR and RF, respectively in 2019, and 4.74 Mg ha−1 and 4.35 Mg ha−1 in 2020. The WUE were 7.2 and 6.9 kg ha−1 mm−1, respectively, in 2019 under IR and RF, and 13.4 and 16.9 kg ha−1 mm−1 in 2020. The data reveals that ‘Dyna-gro 4516x’ (MG IV), ‘LG03-4561-14’ (MG III), and ‘P37A78’ (MG III) are best adapted to the early soybean production system (ESPS) in MS Delta region for sustainable production for conserving water resources.

scholarly journals Growth and yield performance of soybean with the application of Bradyrhyzobium inoculant via furrow and seed

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2387
Author(s):  
Santiel Alves Vieira Neto ◽  
Fábio Ribeiro Pires ◽  
João Carlos Madalão ◽  
Douglas Gomes Viana ◽  
Carlos César Evangelista de Menezes ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Agricultural Production ◽  
Aerial Part ◽  
Dry Matter ◽  
Growth And Yield ◽  
Recommended Dose ◽  
Yield Performance ◽  
Seed Inoculation ◽  
Dry Matter Weight

Given the high costs of agricultural production, especially due to the price of fertilisers, particularly nitrogen, the use of inoculants to supply nitrogen to soybean crops is a widely recommended practice. The objective of this study was to evaluate the feasibility of applying inoculants through seed and planting furrow in soil previously cultivated with soybean and Brazilian native “cerrado” biome soil under greenhouse conditions. Seven treatments were tested: 1) inoculation via seed (inoculant + fungicide + micronutrient), 2) treatment via seed (fungicide + micronutrient), 3) control (only seed), 4) inoculation via furrow-dose 1 (recommended dose), 5) inoculation via furrow-dose 2 (twice the recommended dose), 6) inoculation via furrow-dose 3 (three times the recommended dose) and 7) inoculation via furrow-dose 1 + seed inoculation. We evaluated plant height, fresh and dry matter weight of the aerial part and nodules, number of total, viable and non-viable nodules, number of pods per plant and grain yield. Inoculation was more effective when used in cerrado soil, but soybean performance in treatments without inoculation was higher in previously cultivated soil. Application through furrow proved to be a viable practice due to the similarity of the results obtained with the traditional application by seed.

scholarly journals Residual effects of superficial liming on tropical soil under no-tillage system

2016 ◽  
Vol 51 (9) ◽  
pp. 1633-1642 ◽  
Author(s):  
Claudio Hideo Martins da Costa ◽  
Carlos Alexandre Costa Crusciol ◽  
Jayme Ferrari Neto ◽  
Gustavo Spadotti Amaral Castro
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Block Design ◽  
Residual Effects ◽  
Available Phosphorus ◽  
Long Term Effects ◽  
Matter Production ◽  
Randomized Complete Block Design ◽  
Tillage System

Abstract The objective of this work was to evaluate the long-term effects of the surface application of lime on soil fertility and on the mineral nutrition and grain yield of soybean, and of black oat and sorghum in crop succession. The experiment was carried out on a clayey Oxisol, in a randomized complete block design, with four replicates. Treatments consisted of lime the rates of 0, 1,000, 2,000, and 4,000 kg ha-1, applied in October 2002 and November 2004. Soil samples were collected at five soil layers, down to 0.60-m depth. Surface liming was effective in reducing soil acidity and increasing Ca2+ and Mg2+ contents in the subsurface. Moreover, it increased available phosphorus contents and soil organic matter in the long term (48 to 60 months after the last lime application). Surface liming improved plant nutrition, mainly for N, Ca, and Mg, and increased dry matter production and grain yield of the crops, even in years with regular distribution of rainfall. The greatest productivities of soybean, black oat, and sorghum were obtained with the respective estimated lime doses of 4,000, 2,333, and 3,281 kg ha-1, for shoot dry matter, and of 2,550, 3,555, and over 4,000 kg ha-1, for grain yield.

scholarly journals Growth and Yield Performance of Cowpea (Vigna Unguiculata (L.) Walp) as influenced by Row-Spacing and Period of Weed interference in South-West Nigeria

2014 ◽  
Vol 6 (4) ◽  
pp. 188 ◽  
Author(s):  
Joseph Adigun ◽  
A. O. Osipitan ◽  
Segun Toyosi Lagoke ◽  
Raphael Olusegun Adeyemi ◽  
Stephen Olaoluwa Afolami
Keyword(s):  
Grain Yield ◽  
Vigna Unguiculata ◽  
Growth Parameter ◽  
Crop Growth ◽  
Growth And Yield ◽  
Row Spacing ◽  
Grain Yields ◽  
Weed Interference ◽  
Weed Infestation ◽  
Weed Removal

Weed problem appears to be the most deleterious factor causing between 25 and 60% reduction in potential yield of cowpea. Field trials were therefore conducted to study the effect of inter-row spacing and period of weed interference on growth and yield of cowpea (Vigna unguiculata (L) Walp) at the Teaching and Research Farm of the Federal University of Agriculture, Abeokuta (07° 15'; 03° 25' E) in South Western Nigeria during the early and late wet seasons of 2009. The experiment consisted of eight main plots of weed interference which included initial weed removal for 3, 6, 9, and 12 weeks after sowing (WAS) and subsequently weed –infested until harvest as well as initial weed infestation for corresponding periods and thereafter kept weed free until harvest. There were also sub-plot treatments of three inter-row spacing of 60, 75, and 90 cm. All treatments in different combinations were laid out in a split-plot design with three replications. In both trials, the use of inter-row spacing of 60 cm resulted in significant reduction in weed growth as evident in lower weed dry matter production and subsequent higher cowpea pod and grain yields than those of 75 and 90 cm inter-row spacing. Initial weed infestation of up to 3 WAS did not have any adverse effect on crop growth and cowpea grain yields provided the weeds were subsequently removed. On the other hand, cowpea grain yield loss was not significantly averted by keeping the crop weed free for only 3 WAS without subsequent weed removal. In this study, initial weed-infestation for 6 WAS and beyond significantly depressed various crop growth parameter and cowpea grain yield compared with the crop kept weed free throughout its life cycle. In order to obtain optimum yields similar to that of the weed free cowpea field, it was required to keep the crop weed free for 6 WAS and beyond. However, frequent weeding beyond 9 weeks after sowing did not improve cowpea yield significantly and as a matter of fact it may even result in reduction of cowpea grain yield due to mechanical damage of hoe weeding. The practical implication of this finding is that early weeding starting from 3 WAS is very crucial for cowpea production while the critical period of weed removal for optimum yield in cowpea is between 3 and 9 WAS in the forest-savannah transitional zone of south Western Nigeria.

scholarly journals AGRONOMIC CHARACTERISTICS AND GRAIN YIELD OF SORGHUM AND MAIZE HYBRIDS GROWN WITH DIFFERENT SOWING TIMES1

2021 ◽  
Vol 34 (4) ◽  
pp. 780-790
Author(s):  
PAULO VINICIUS DEMENECK VIEIRA ◽  
PAULO SÉRGIO LOURENÇO DE FREITAS ◽  
ANDRÉ LUIZ BISCAIA RIBEIRO DA SILVA ◽  
ANA CLAUDIA SOSSAI SOUZA ◽  
JULIANA MARQUES VORONIAK
Keyword(s):  
Experimental Design ◽  
Grain Yield ◽  
Leaf Area Index ◽  
Maize Crop ◽  
Area Index ◽  
Maize Hybrids ◽  
Agronomic Characteristics ◽  
West Region ◽  
Spikelets Per Panicle ◽  
Grown Plant

ABSTRACT Sorghum is a commonly grown plant in the Central-West region of Brazil as a second crop; however, it is grown almost exclusively as a second crop after maize in the state of Paraná (South region). The growth of sorghum crops is an option for areas or times in which the growth of maize crops can be risky. Thus, the objective of this work was to evaluate the agronomic characteristics of eight sorghum hybrids (ADV-123, ADV-114, 1G100, 50A10, 1G244, 50A40, 50A50, and 1G282) grown in three sowing times in two agricultural years: 2014 (February 20, March 02, and March 03) and 2015 (February 09, February 19, and March 01), and four maize hybrids in 2014 (DKB-330-Pro, P-3431-HX, Formula-TL, and AG-9010-Pro) and five maize hybrids in 2015 (DKB-330-Pro, P-3431-HX, Formula-TL, DKB-275-Pro, and DKB-290-Pro), in the same sowing times used for sorghum. A randomized complete block experimental design with a split-plot factorial arrangement was used, with the sowing times in the plots and the hybrids in the sub-plots. The variables evaluated were: number of days from sowing to flowering, leaf area index, 1,000-grain weight, grain yield, number of spikelets per panicle, for the sorghum crop; and number of rows per ear and number of grains per row, for the maize crop. The comparison between the two crops showed that the sorghum maintained higher production stability in the different sowing times.

scholarly journals Doses and times of nitrogen application via leaf in the production of corn for silage in the Southern Amazon

2021 ◽  
Vol 38 (2) ◽  
pp. 21-260
Author(s):  
Fellipe Lemes da Rosa ◽  
Oscar Mitsuo Yamashita ◽  
Marco Camillo de Carvalho ◽  
Rivanildo Dallacort ◽  
Adriano Maltezo da Rocha ◽  
...  
Keyword(s):  
Experimental Design ◽  
Foliar Application ◽  
Brazilian Amazon ◽  
Nitrogen Application ◽  
Soil Fertilization ◽  
Foliar Nitrogen ◽  
Production Factors ◽  
N Rates ◽  
Leaf Fertilizer ◽  
Different Doses

The objective was to evaluate the application of foliar nitrogen in different doses and times, as a complement to soil fertilization. The work was conducted in a rural area of the municipality of Terra Nova do Norte – MT, located in the southern of brazilian Amazon. The treatments were a combination of foliar applications of nitrogen at doses of 0, 250, 500 and 750 mL.ha-1, and two application times with different intervals: 15 and 40 days after emergence; and 25 and 40 days after the emergency. The experimental design was a randomized block with four replications, in a factorial 4 x 2, totaling eight treatments. It was found that the variables green mass productivity and dried plant and ear and ear length responded positively as the N rates and application times. It was also observed that the foliar application of nitrogen increased the productivity of corn for silage, and better results are obtained from 750 mL.ha-1 of the studied leaf fertilizer. There was no increase in production factors when the foliar application of nitrogen was split.

scholarly journals Fertilización Con Potasio Y Fosfitos, Sobre El Rendimiento De Maíz Duro (Zea Mays) En La Zona Subcentral Litoral

2018 ◽  
Vol 14 (15) ◽  
pp. 46
Author(s):  
Álvaro Lamilla Arana ◽  
Eduardo Colina Navarrete ◽  
Carlos Castro Arteaga ◽  
Danilo Santana Aragone ◽  
Guillermo García Vásquez ◽  
...  
Keyword(s):  
Zea Mays ◽  
Experimental Design ◽  
Grain Yield ◽  
Plant Height ◽  
Zea Mays L ◽  
Potassium Sulfate ◽  
Hybrid Corn ◽  
Calcium Magnesium ◽  
San Juan County ◽  
Muriate Of Potash

The investigation evaluated the effect of fertilizers potásicos with fosfitos on the yield of grain of hard corn (Zea mays L.), in the Property "Santiago", located in the Km 26 way Babahoyo-San Juan, county of Los Ríos. A rehearsal settled down in the hybrid corn DK-7088, measuring the answer from the corn to the application of fertilizers potasic and fhosphite, to determine the dose with more effect on the production. 19 treatments were proven with Chloride of potassium, Sulfate of potassium and Nitrate of potassium, with fhosphite of Calcium, Magnesium and Potassium, more a witness without applications. The used experimental design was complete Blocks at random in three repetitions, the evaluated variables were subjected to the variancia analysis, and the test was applied from Tukey to 95% of probability. The evaluated parameters were: plant height, days to flowering, longitude and ear diameter and yield for hectare. Found increases in grain yield with three treatments, highlighting the treatment with the application of muriate of potash in conjunction with Calcium phosphide (9451,65 kg ha1 ). The results indicate the possibility of increases of more than 49% in relation to the witness (6339 kg ha1 ) where there was applied the treatments.

Sign in / Sign up

Export Citation Format

Share Document