A Manifest Information Model for Firmware Updates in Internet of Things (IoT) Devices

2022 ◽  
Author(s):  
B. Moran ◽  
H. Tschofenig ◽  
H. Birkholz
Keyword(s):  
Internet Of Things ◽  
Information Model ◽  
Iot Devices

Bringing Security to The Smallest Embedded Systems

2017 ◽  
Author(s):  
JOSEPH YIU
Keyword(s):  
Internet Of Things ◽  
Embedded Systems ◽  
Low Cost ◽  
Security Requirements ◽  
The Internet ◽  
Security Measures ◽  
Significant Challenge ◽  
Iot Devices

The increasing need for security in microcontrollers Security has long been a significant challenge in microcontroller applications(MCUs). Traditionally, many microcontroller systems did not have strong security measures against remote attacks as most of them are not connected to the Internet, and many microcontrollers are deemed to be cheap and simple. With the growth of IoT (Internet of Things), security in low cost microcontrollers moved toward the spotlight and the security requirements of these IoT devices are now just as critical as high-end systems due to:

Agricultural Application of Web of Things Architecture

Impact ◽  
2019 ◽  
Vol 2019 (10) ◽  
pp. 61-63 ◽  
Author(s):  
Akihiro Fujii
Keyword(s):  
Internet Of Things ◽  
Agricultural Sector ◽  
Electronic Device ◽  
Specific Work ◽  
Science And Engineering ◽  
Unique Identifier ◽  
Agricultural Application ◽  
Iot Devices ◽  
The Internet Of Things ◽  
Type Pressure

The Internet of Things (IoT) is a term that describes a system of computing devices, digital machines, objects, animals or people that are interrelated. Each of the interrelated 'things' are given a unique identifier and the ability to transfer data over a network that does not require human-to-human or human-to-computer interaction. Examples of IoT in practice include a human with a heart monitor implant, an animal with a biochip transponder (an electronic device inserted under the skin that gives the animal a unique identification number) and a car that has built-in sensors which can alert the driver about any problems, such as when the type pressure is low. The concept of a network of devices was established as early as 1982, although the term 'Internet of Things' was almost certainly first coined by Kevin Ashton in 1999. Since then, IoT devices have become ubiquitous, certainly in some parts of the world. Although there have been significant developments in the technology associated with IoT, the concept is far from being fully realised. Indeed, the potential for the reach of IoT extends to areas which some would find surprising. Researchers at the Faculty of Science and Engineering, Hosei University in Japan, are exploring using IoT in the agricultural sector, with some specific work on the production of melons. For the advancement of IoT in agriculture, difficult and important issues are implementation of subtle activities into computers procedure. The researchers challenges are going on.

scholarly journals Internet of things issues related to psychiatry

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Scott Monteith ◽  
Tasha Glenn ◽  
John Geddes ◽  
Emanuel Severus ◽  
Peter C. Whybrow ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Cognitive Abilities ◽  
Healthcare Providers ◽  
Emotional Reactions ◽  
The Body ◽  
Psychiatric Research ◽  
Main Body ◽  
Personal Safety ◽  
Healthcare Organizations ◽  
Iot Devices

Abstract Background Internet of Things (IoT) devices for remote monitoring, diagnosis, and treatment are widely viewed as an important future direction for medicine, including for bipolar disorder and other mental illness. The number of smart, connected devices is expanding rapidly. IoT devices are being introduced in all aspects of everyday life, including devices in the home and wearables on the body. IoT devices are increasingly used in psychiatric research, and in the future may help to detect emotional reactions, mood states, stress, and cognitive abilities. This narrative review discusses some of the important fundamental issues related to the rapid growth of IoT devices. Main body Articles were searched between December 2019 and February 2020. Topics discussed include background on the growth of IoT, the security, safety and privacy issues related to IoT devices, and the new roles in the IoT economy for manufacturers, patients, and healthcare organizations. Conclusions The use of IoT devices will increase throughout psychiatry. The scale, complexity and passive nature of data collection with IoT devices presents unique challenges related to security, privacy and personal safety. While the IoT offers many potential benefits, there are risks associated with IoT devices, and from the connectivity between patients, healthcare providers, and device makers. Security, privacy and personal safety issues related to IoT devices are changing the roles of manufacturers, patients, physicians and healthcare IT organizations. Effective and safe use of IoT devices in psychiatry requires an understanding of these changes.

scholarly journals An efficient pruning scheme of deep neural networks for Internet of Things applications

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Chen Qi ◽  
Shibo Shen ◽  
Rongpeng Li ◽  
Zhifeng Zhao ◽  
Qing Liu ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Internet Of Things ◽  
Deep Neural Networks ◽  
Computational Cost ◽  
Superior Performance ◽  
Compact Structure ◽  
Resource Limited ◽  
Benchmark Datasets ◽  
Iot Devices

AbstractNowadays, deep neural networks (DNNs) have been rapidly deployed to realize a number of functionalities like sensing, imaging, classification, recognition, etc. However, the computational-intensive requirement of DNNs makes it difficult to be applicable for resource-limited Internet of Things (IoT) devices. In this paper, we propose a novel pruning-based paradigm that aims to reduce the computational cost of DNNs, by uncovering a more compact structure and learning the effective weights therein, on the basis of not compromising the expressive capability of DNNs. In particular, our algorithm can achieve efficient end-to-end training that transfers a redundant neural network to a compact one with a specifically targeted compression rate directly. We comprehensively evaluate our approach on various representative benchmark datasets and compared with typical advanced convolutional neural network (CNN) architectures. The experimental results verify the superior performance and robust effectiveness of our scheme. For example, when pruning VGG on CIFAR-10, our proposed scheme is able to significantly reduce its FLOPs (floating-point operations) and number of parameters with a proportion of 76.2% and 94.1%, respectively, while still maintaining a satisfactory accuracy. To sum up, our scheme could facilitate the integration of DNNs into the common machine-learning-based IoT framework and establish distributed training of neural networks in both cloud and edge.

scholarly journals Practical Cross-Layer Radio Frequency-Based Authentication Scheme for Internet of Things

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4034
Author(s):  
Arie Haenel ◽  
Yoram Haddad ◽  
Maryline Laurent ◽  
Zonghua Zhang
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Real Life ◽  
Computation Time ◽  
Cost Effective ◽  
Battery Life ◽  
Cross Layer ◽  
Security Level ◽  
Cost Of Energy ◽  
Iot Devices

The Internet of Things world is in need of practical solutions for its security. Existing security mechanisms for IoT are mostly not implemented due to complexity, budget, and energy-saving issues. This is especially true for IoT devices that are battery powered, and they should be cost effective to be deployed extensively in the field. In this work, we propose a new cross-layer approach combining existing authentication protocols and existing Physical Layer Radio Frequency Fingerprinting technologies to provide hybrid authentication mechanisms that are practically proved efficient in the field. Even though several Radio Frequency Fingerprinting methods have been proposed so far, as a support for multi-factor authentication or even on their own, practical solutions are still a challenge. The accuracy results achieved with even the best systems using expensive equipment are still not sufficient on real-life systems. Our approach proposes a hybrid protocol that can save energy and computation time on the IoT devices side, proportionally to the accuracy of the Radio Frequency Fingerprinting used, which has a measurable benefit while keeping an acceptable security level. We implemented a full system operating in real time and achieved an accuracy of 99.8% for the additional cost of energy, leading to a decrease of only ~20% in battery life.

scholarly journals Next Generation of SDN in Cloud-Fog for 5G and Beyond-Enabled Applications: Opportunities and Challenges

Network ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 28-49
Author(s):  
Ehsan Ahvar ◽  
Shohreh Ahvar ◽  
Syed Mohsan Raza ◽  
Jose Manuel Sanchez Vilchez ◽  
Gyu Myoung Lee
Keyword(s):  
Internet Of Things ◽  
Data Sharing ◽  
Mobile Networks ◽  
The Other ◽  
The Internet ◽  
Hybrid Cloud ◽  
Next Generation ◽  
Delay Constraints ◽  
Mission Critical ◽  
Iot Devices

In recent years, the number of objects connected to the internet have significantly increased. Increasing the number of connected devices to the internet is transforming today’s Internet of Things (IoT) into massive IoT of the future. It is predicted that, in a few years, a high communication and computation capacity will be required to meet the demands of massive IoT devices and applications requiring data sharing and processing. 5G and beyond mobile networks are expected to fulfill a part of these requirements by providing a data rate of up to terabits per second. It will be a key enabler to support massive IoT and emerging mission critical applications with strict delay constraints. On the other hand, the next generation of software-defined networking (SDN) with emerging cloudrelated technologies (e.g., fog and edge computing) can play an important role in supporting and implementing the above-mentioned applications. This paper sets out the potential opportunities and important challenges that must be addressed in considering options for using SDN in hybrid cloud-fog systems to support 5G and beyond-enabled applications.

scholarly journals State-of-the-Art Software-Based Remote Attestation: Opportunities and Open Issues for Internet of Things

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1598
Author(s):  
Sigurd Frej Joel Jørgensen Ankergård ◽  
Edlira Dushku ◽  
Nicola Dragoni
Keyword(s):  
Internet Of Things ◽  
Smart Cities ◽  
Cyber Attacks ◽  
Resource Constrained ◽  
Remote Attestation ◽  
Comprehensive Overview ◽  
Research Issues ◽  
Advantages And Disadvantages ◽  
Iot Devices ◽  
Specialized Hardware

The Internet of Things (IoT) ecosystem comprises billions of heterogeneous Internet-connected devices which are revolutionizing many domains, such as healthcare, transportation, smart cities, to mention only a few. Along with the unprecedented new opportunities, the IoT revolution is creating an enormous attack surface for potential sophisticated cyber attacks. In this context, Remote Attestation (RA) has gained wide interest as an important security technique to remotely detect adversarial presence and assure the legitimate state of an IoT device. While many RA approaches proposed in the literature make different assumptions regarding the architecture of IoT devices and adversary capabilities, most typical RA schemes rely on minimal Root of Trust by leveraging hardware that guarantees code and memory isolation. However, the presence of a specialized hardware is not always a realistic assumption, for instance, in the context of legacy IoT devices and resource-constrained IoT devices. In this paper, we survey and analyze existing software-based RA schemes (i.e., RA schemes not relying on specialized hardware components) through the lens of IoT. In particular, we provide a comprehensive overview of their design characteristics and security capabilities, analyzing their advantages and disadvantages. Finally, we discuss the opportunities that these RA schemes bring in attesting legacy and resource-constrained IoT devices, along with open research issues.

scholarly journals Developing an On-Demand Cloud-Based Sensing-as-a-Service System for Internet of Things

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Mihui Kim ◽  
Mihir Asthana ◽  
Siddhartha Bhargava ◽  
Kartik Krishnan Iyyer ◽  
Rohan Tangadpalliwar ◽  
...  
Keyword(s):  
Sensor Networks ◽  
Internet Of Things ◽  
Service System ◽  
Value Added ◽  
Computing System ◽  
Sensor Data ◽  
Dynamic Provisioning ◽  
On Demand ◽  
Cloud Computing System ◽  
Iot Devices

The increasing number of Internet of Things (IoT) devices with various sensors has resulted in a focus on Cloud-based sensing-as-a-service (CSaaS) as a new value-added service, for example, providing temperature-sensing data via a cloud computing system. However, the industry encounters various challenges in the dynamic provisioning of on-demand CSaaS on diverse sensor networks. We require a system that will provide users with standardized access to various sensor networks and a level of abstraction that hides the underlying complexity. In this study, we aim to develop a cloud-based solution to address the challenges mentioned earlier. Our solution, SenseCloud, includes asensor virtualizationmechanism that interfaces with diverse sensor networks, amultitenancymechanism that grants multiple users access to virtualized sensor networks while sharing the same underlying infrastructure, and adynamic provisioningmechanism to allow the users to leverage the vast pool of resources on demand and on a pay-per-use basis. We implement a prototype of SenseCloud by using real sensors and verify the feasibility of our system and its performance. SenseCloud bridges the gap between sensor providers and sensor data consumers who wish to utilize sensor data.

scholarly journals Mathematical model on distributed denial of service attack through Internet of things in a network

2019 ◽  
Vol 8 (1) ◽  
pp. 486-495 ◽  
Author(s):  
Bimal Kumar Mishra ◽  
Ajit Kumar Keshri ◽  
Dheeresh Kumar Mallick ◽  
Binay Kumar Mishra
Keyword(s):  
Mathematical Model ◽  
Internet Of Things ◽  
Equilibrium Points ◽  
Denial Of Service ◽  
Distributed Denial Of Service ◽  
Ddos Attacks ◽  
Denial Of Service Attack ◽  
Different Types ◽  
Service Attack ◽  
Iot Devices

Abstract Internet of Things (IoT) opens up the possibility of agglomerations of different types of devices, Internet and human elements to provide extreme interconnectivity among them towards achieving a completely connected world of things. The mainstream adaptation of IoT technology and its widespread use has also opened up a whole new platform for cyber perpetrators mostly used for distributed denial of service (DDoS) attacks. In this paper, under the influence of internal and external nodes, a two - fold epidemic model is developed where attack on IoT devices is first achieved and then IoT based distributed attack of malicious objects on targeted resources in a network has been established. This model is mainly based on Mirai botnet made of IoT devices which came into the limelight with three major DDoS attacks in 2016. The model is analyzed at equilibrium points to find the conditions for their local and global stability. Impact of external nodes on the over-all model is critically analyzed. Numerical simulations are performed to validate the vitality of the model developed.

Sign in / Sign up

Export Citation Format

Share Document