scholarly journals Development of personalized cell-populated vascular graft in vitro

2021 ◽  
Vol 10 (2) ◽  
pp. 89-93
Author(s):  
M. Yu. Khanova ◽  
E. A. Velikanova ◽  
T. V. Glushkova ◽  
V. G. Matveeva
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Small Diameter ◽  
Vascular Prosthesis ◽  
Pulsating Flow ◽  
Mechanical Stimuli ◽  
Endothelial Monolayer ◽  
Vascular Prostheses ◽  
Static Conditions

Aim. To create a personalized cell-populated small-diameter vascular prosthesis in a pulsating bioreactor.Methods. Tubular grafts were made by electrospinning from mixtures of biodegradable polymers, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(εcaprolactone) (PCL). The inner surface is modified with fibrin. Tubular scaffolds were colonized with cultured colony-forming endothelial cells and grown under static conditions for 2 days. Then, the cell-populated prostheses continued to be cultivated for 5 days in a pulsating bioreactor system with a final shear stress of 2.85 dynes/cm².Results. The advantages of the cultivation of cell-populated vascular prostheses in a pulsating bioreactor have been revealed. The selected mode of cultivation of cellpopulated vascular prostheses under conditions of a pulsating flow with a shear stress of 2.85 dynes/cm² did not have a damaging effect on the integrity of the endothelial monolayer. Moving unidirectional mechanical stimuli of chaotic orientation fibers of F-actin changed to a predominant orientation in the direction of flow, and also increased the expression of F-actin, Talin focal adhesion protein, and specific endothelial markers CD309, CD31, vWF.Conclusion. The creation of a personalized cell-populated small-diameter vascular prosthesis with a functional endothelial monolayer is possible due to the use of autologous endothelial cells, autologous fibrin, and cultivation under conditions of a pulsating flow.

Endothelialization of PTFE vascular grafts under flow induces significant cell changes

2001 ◽  
Vol 24 (4) ◽  
pp. 235-242 ◽  
Author(s):  
A. Rademacher ◽  
M. Paulitschke ◽  
R. Meyer ◽  
R. Hetzer
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Cell Layer ◽  
Culture Media ◽  
Vascular Grafts ◽  
Small Diameter ◽  
Ptfe Graft ◽  
Static Conditions

Background To minimize thrombogeneity of small diameter PTFE grafts they are usually coated in vitro with endothelial cells under static culture conditions. The disadvantage of this technique is that a cell layer is formed that fails to withstand shear stress typical in normal blood flow. Method Since the in vivo functional and structural status of endothelial cells correlates with the applied shear stress, we developed a computer-controlled perfusion system to seed and culture cells on PTFE-grafts up to a confluent monolayer under the influence of increasing shear stress. The confluence of endothelial coating was defined by immunohistological staining of cross sections, and by upper light microscopy of flattened graft samples. In addition, the expression of fibronectin as an important adhesion molecule was estimated. Results and discussion The application of pulsatile shear stress (6.6 dyn/cm2, 5 min) to grafts endothelialized under perfusion (n = 7) did not lead to a disruption of the confluent cell layer. In contrast, a 5 min long shear stress of 3 dyn/cm2was sufficient to wash more than 50% of cells off the PTFE-graft cultured under static conditions (n = 6). The perfusion cultures showed a significantly higher proliferation rate in comparison with static cultures. This effect was reproducibile in both serum-containing and serum-free culture media. The expression of fibronectin by endothelial cells was significantly higher in the perfused graft compared to the static one. These results suggest the practicability of endothelialized PTFE vascular grafts, preconditioned to shear rates similar to the in vivo situation, as an alternative bypass material in cardiac surgery.

Identification of atheroprone shear stress responsive regulatory elements in endothelial cells

2019 ◽  
Vol 115 (10) ◽  
pp. 1487-1499 ◽  
Author(s):  
Olga Bondareva ◽  
Roman Tsaryk ◽  
Vesna Bojovic ◽  
Maria Odenthal-Schnittler ◽  
Arndt F Siekmann ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Umbilical Vein ◽  
Regulatory Element ◽  
Hippo Pathway ◽  
Regulatory Elements ◽  
Binding Motif ◽  
Motif Analysis ◽  
Static Conditions

Abstract Aims Oscillatory shear stress (OSS) is an atheroprone haemodynamic force that occurs in areas of vessel irregularities and is implicated in the pathogenesis of atherosclerosis. Changes in signalling and transcriptional programme in response to OSS have been vigorously studied; however, the underlying changes in the chromatin landscape controlling transcription remain to be elucidated. Here, we investigated the changes in the regulatory element (RE) landscape of endothelial cells under atheroprone OSS conditions in an in vitro model. Methods and results Analyses of H3K27ac chromatin immunoprecipitation-Seq enrichment and RNA-Seq in primary human umbilical vein endothelial cells 6 h after onset of OSS identified 2806 differential responsive REs and 33 differentially expressed genes compared with control cells kept under static conditions. Furthermore, gene ontology analyses of putative RE-associated genes uncovered enrichment of WNT/HIPPO pathway and cytoskeleton reorganization signatures. Transcription factor (TF) binding motif analysis within RE sequences identified over-representation of ETS, Zinc finger, and activator protein 1 TF families that regulate cell cycle, proliferation, and apoptosis, implicating them in the development of atherosclerosis. Importantly, we confirmed the activation of EGR1 as well as the YAP/TAZ complex early (6 h) after onset of OSS in both cultured human vein and artery endothelial cells and, by undertaking luciferase assays, functionally verified their role in RE activation in response to OSS. Conclusions Based on the identification and verification of specific responsive REs early upon OSS exposure, we propose an expanded mechanism of how OSS might contribute to the development of atherosclerosis.

Tissue Factor Activity Is Upregulated in Human Endothelial Cells Exposed to Oscillatory Shear Stress

2002 ◽  
Vol 87 (06) ◽  
pp. 1062-1068 ◽  
Author(s):  
Paolo Silacci ◽  
Karima Bouzourene ◽  
François Daniel ◽  
Hans Brunner ◽  
Daniel Hayoz ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Protein Expression ◽  
Tissue Factor ◽  
Critical Role ◽  
Oscillatory Shear ◽  
Human Endothelial Cells ◽  
Static Conditions ◽  
Oscillatory Shear Stress

SummaryHemodynamic forces play a critical role in the pathogenesis of atherosclerosis as evidenced by the focal nature of the disease. Oscillatory shear stress characterizes the hemodynamic environment of plaque-prone areas as opposed to unidirectional shear stress typical of plaque-free areas. These particular flow conditions modulate atherosclerosis-related genes. Tissue factor (TF) initiates blood coagulation, contributes to vascular remodeling, and is therefore a potential contributor in the development/progression of atherosclerosis. We investigated the effect of oscillatory and unidirectional flows on TF using an in vitro perfusion system. Human endothelial cells exposed for 24 h to oscillatory shear stress, significantly increased TF mRNA, and TF protein expression (1.5-and 1.75-fold, respectively, p <0.01), and surface TF activity (twofolds-increase). Expression of TF inhibitor (TFPI), mRNA and protein, remained unchanged as compared to static conditions. Conversely, cells exposed to unidirectional shear, showed a decrease in TF activity with a significant increase in TFPI mRNA and protein expression (1.5-and 1.8-fold, respectively, p <0.01). These results show for the first time that pulsatile oscillatory shear stress induces a procoagulant phenotype of endothelial cells which may favor formation/progression of atherothrombotic lesions.

Bemiparin and Fluid Flow Modulate the Expression, Activity and Release of Tissue Factor Pathway Inhibitor in Human Endothelial Cells In Vitro

2001 ◽  
Vol 86 (12) ◽  
pp. 1547-1554 ◽  
Author(s):  
Andrew Westmuckett ◽  
Vijay Kakkar ◽  
Tsutomu Hamuro ◽  
Florea Lupu ◽  
Cristina Lupu
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Cell Surface ◽  
Tissue Factor ◽  
Tissue Factor Pathway Inhibitor ◽  
Arterial Flow ◽  
Immunogold Electron Microscopy ◽  
Tissue Factor Pathway ◽  
Static Conditions

SummaryWe investigated the localisation, gene expression, and activity of tissue factor pathway inhibitor (TFPI) in endothelial cells (EC) grown in static conditions or under shear stress, in the presence of unfractionated heparin (UFH) and two low-molecular-weight heparins (LMWHs), dalteparin and bemiparin (a second generation of LMWHs). All three preparations induced increased release, cellular redistribution, and enhanced activity of TFPI on the cell surface in static EC. In EC grown under shear stress (0.27, 4.1 and 19 dyne/cm2) and incubated with each heparin for 24 h, the release of TFPI was significantly correlated with the level of flow for bemiparin and dalteparin, but not for UFH. For all three levels of flow tested, bemiparin induced the highest secretion and increase of both cellular TFPI and cell surface activity of the inhibitor. The expression of TFPI mRNA, determined by Northern blotting, was specifically modulated by heparins. All three preparations increased the expression of TFPI by 60 to 120% in EC under minimal flow, but only bemiparin enhanced TFPI mRNA in EC under the arterial flow. Immunogold electron microscopy revealed that EC exhibited strong cellular labelling for TFPI when grown under arterial flow in the presence of bemiparin. We conclude that in EC subjected to shear stress in vitro bemiparin is more efficient than UFH or dalteparin in modulating the expression, release and activity of TFPI. We therefore suggest that bemiparin may be superior over the conventional heparins in maintaining the anticoagulant properties of the endothelium.

Effects of shear stress on adhesive interaction between neutrophils and cultured endothelial cells

1987 ◽  
Vol 63 (5) ◽  
pp. 2031-2041 ◽  
Author(s):  
G. S. Worthen ◽  
L. A. Smedly ◽  
M. G. Tonnesen ◽  
D. Ellis ◽  
N. F. Voelkel ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Endothelial Cell ◽  
Neutrophil Migration ◽  
Adhesive Interaction ◽  
Hydrodynamic Shear ◽  
Neutrophil Adherence ◽  
Pulmonary Arterial ◽  
Static Conditions

The effect of hydrodynamic shear stress on the adhesive interaction between neutrophils and endothelial cells in vitro was investigated using an apparatus similar to a cone-in-plate viscometer. Isolated bovine neutrophils were labeled with 111In and incubated with monolayers of cultured bovine pulmonary arterial endothelial cells in the presence of different degrees of shear stress. Physiologically relevant shear (less than 2 dyn/cm2) was associated with marked decrease in neutrophil adherence. Stimulation with 10% bovine zymosan-activated plasma increased adherence under static conditions but failed to increase adherence conducted during the application of shear stress. Inhibition of endothelial cell prostacyclin production by meclofenamate or aspirin failed to alter the response to shear. Incubation of neutrophils under static conditions for 10, but not 5, min however, markedly enhanced subsequent resistance to shear, suggesting that a time-dependent reaction between neutrophil and endothelial cell was required to induce an increase in the strength of adherence. Analysis of neutrophil migration underneath the monolayer indicated that such migration in no way accounted for resistance to shear, particularly since shear resistance was enhanced on serum-coated plastic as well as endothelial cells. We conclude that hemodynamic factors may play an important role in modulating neutrophil adherence to endothelium in both normal and inflammatory states.

Naturally Produced Extracellular Matrix Is an Excellent Substrate for Canine Endothelial Cell Proliferation and Resistance to Shear Stress on PTFE Vascular Grafts

1997 ◽  
Vol 78 (05) ◽  
pp. 1392-1398 ◽  
Author(s):  
A Schneider ◽  
M Chandra ◽  
G Lazarovici ◽  
I Vlodavsky ◽  
G Merin ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Endothelial Cells ◽  
Shear Stress ◽  
Endothelial Cell ◽  
Cell Attachment ◽  
Thrombus Formation ◽  
Endothelial Cell Proliferation ◽  
Ptfe Graft ◽  
Vascular Prostheses ◽  
Endothelial Cell Attachment

SummaryPurpose: Successful development of a vascular prosthesis lined with endothelial cells (EC) may depend on the ability of the attached cells to resist shear forces after implantation. The present study was designed to investigate EC detachment from extracellular matrix (ECM) precoated vascular prostheses, caused by shear stress in vitro and to test the performance of these grafts in vivo. Methods: Bovine aortic endothelial cells were seeded inside untreated polytetrafluoro-ethylene (PTFE) vascular graft (10 X 0.6 cm), PTFE graft precoated with fibronectin (FN), or PTFE precoated with FN and a naturally produced ECM (106 cells/graft). Sixteen hours after seeding the medium was replaced and unattached cells counted. The strength of endothelial cell attachment was evaluated by subjecting the grafts to a physiologic shear stress of 15 dynes/cm2 for 1 h. The detached cells were collected and quantitated. PTFE or EC preseeded ECM coated grafts were implanted in the common carotid arteries of dogs. Results: While little or no differences were found in the extent of endothelial cell attachment to the various grafts (79%, 87% and 94% of the cells attached to PTFE, FN precoated PTFE, or FN+ECM precoated PTFE, respectively), the number of cells retained after a shear stress was significanly increased on ECM coated PTFE (20%, 54% and 85% on PTFE, FN coated PTFE, and FN+ECM coated PTFE, respectively, p <0.01). Implantation experiments in dogs revealed a significant increase in EC coverage and a reduced incidence of thrombus formation on ECM coated grafts that were seeded with autologous saphenous vein endothelial cells prior to implantation. Conclusion: ECM coating significantly increased the strength of endothelial cell attachment to vascular prostheses subjected to shear stress. The presence of adhesive macromolecules and potent endothelial cell growth promoting factors may render the ECM a promising substrate for vascular prostheses.

scholarly journals Investigation of Wall Shear Stress in Cardiovascular Research and in Clinical Practice—From Bench to Bedside

2021 ◽  
Vol 22 (11) ◽  
pp. 5635
Author(s):  
Katharina Urschel ◽  
Miyuki Tauchi ◽  
Stephan Achenbach ◽  
Barbara Dietel
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Cell Function ◽  
Computational Techniques ◽  
Apical Surface ◽  
Cardiovascular Research ◽  
Endothelial Cell Function ◽  
Wall Shear

In the 1900s, researchers established animal models experimentally to induce atherosclerosis by feeding them with a cholesterol-rich diet. It is now accepted that high circulating cholesterol is one of the main causes of atherosclerosis; however, plaque localization cannot be explained solely by hyperlipidemia. A tremendous amount of studies has demonstrated that hemodynamic forces modify endothelial athero-susceptibility phenotypes. Endothelial cells possess mechanosensors on the apical surface to detect a blood stream-induced force on the vessel wall, known as “wall shear stress (WSS)”, and induce cellular and molecular responses. Investigations to elucidate the mechanisms of this process are on-going: on the one hand, hemodynamics in complex vessel systems have been described in detail, owing to the recent progress in imaging and computational techniques. On the other hand, investigations using unique in vitro chamber systems with various flow applications have enhanced the understanding of WSS-induced changes in endothelial cell function and the involvement of the glycocalyx, the apical surface layer of endothelial cells, in this process. In the clinical setting, attempts have been made to measure WSS and/or glycocalyx degradation non-invasively, for the purpose of their diagnostic utilization. An increasing body of evidence shows that WSS, as well as serum glycocalyx components, can serve as a predicting factor for atherosclerosis development and, most importantly, for the rupture of plaques in patients with high risk of coronary heart disease.

scholarly journals Mechanical Strain-Enabled Reconstitution of Dynamic Environment in Organ-on-a-Chip Platforms: A Review

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 765
Author(s):  
Qianbin Zhao ◽  
Tim Cole ◽  
Yuxin Zhang ◽  
Shi-Yang Tang
Keyword(s):  
Cell Culture ◽  
Shear Stress ◽  
Cultured Cells ◽  
Mechanical Strain ◽  
3D Cell Culture ◽  
Small Scale ◽  
Mechanical Stimuli ◽  
Human Organ ◽  
Organ On A Chip

Organ-on-a-chip (OOC) uses the microfluidic 3D cell culture principle to reproduce organ- or tissue-level functionality at a small scale instead of replicating the entire human organ. This provides an alternative to animal models for drug development and environmental toxicology screening. In addition to the biomimetic 3D microarchitecture and cell–cell interactions, it has been demonstrated that mechanical stimuli such as shear stress and mechanical strain significantly influence cell behavior and their response to pharmaceuticals. Microfluidics is capable of precisely manipulating the fluid of a microenvironment within a 3D cell culture platform. As a result, many OOC prototypes leverage microfluidic technology to reproduce the mechanically dynamic microenvironment on-chip and achieve enhanced in vitro functional organ models. Unlike shear stress that can be readily generated and precisely controlled using commercial pumping systems, dynamic systems for generating proper levels of mechanical strains are more complicated, and often require miniaturization and specialized designs. As such, this review proposes to summarize innovative microfluidic OOC platforms utilizing mechanical actuators that induce deflection of cultured cells/tissues for replicating the dynamic microenvironment of human organs.

scholarly journals The Influence of a Knitted Hydrophilic Prosthesis of Blood Vessels on the Activation of Coagulation System—In Vitro Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1600
Author(s):  
Maria Szymonowicz ◽  
Maciej Dobrzynski ◽  
Sara Targonska ◽  
Agnieszka Rusak ◽  
Zbigniew Rybak ◽  
...  
Keyword(s):  
Blood Vessels ◽  
Initial Period ◽  
In Vitro Study ◽  
Vascular Prosthesis ◽  
Coagulation System ◽  
Factor Xii ◽  
Scanning Calorimetry ◽  
Vascular Prostheses ◽  
Control Value

The replacement of affected blood vessels of the polymer material can cause imbalances in the blood haemostatic system. Changes in blood after the implantation of vascular grafts depend not only on the chemical composition but also on the degree of surface wettability. The Dallon® H unsealed hydrophilic knitted vascular prosthesis double velour was assessed at work and compare with hydrophobic vascular prosthesis Dallon®. Spectrophotometric studies were performed in the infrared and differential scanning calorimetry, which confirmed the effectiveness of the process of modifying vascular prostheses. Determination of the parameters of coagulation time of blood after contact in vitro with Dallon® H vascular prosthesis was also carried out. Prolongation of activated thromboplastin time, decreased activity of factor XII, IX and VIII, were observed. The prolonged thrombin and fibrinogen were reduced in the initial period of the experiment. The activity of plasminogen and antithrombin III and protein C were at the level of control value. The observed changes in the values of determined parameters blood coagulation do not exceed the range of referential values for those indexes. The observed changes are the result of considerable blood absorptiveness by the prosthesis of blood vessels and their sealing.

Effect of glycocalyx on shear-dependent albumin uptake in endothelial cells

2004 ◽  
Vol 287 (5) ◽  
pp. H2287-H2294 ◽  
Author(s):  
Akinori Ueda ◽  
Manabu Shimomura ◽  
Mariko Ikeda ◽  
Ryuhei Yamaguchi ◽  
Kazuo Tanishita
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Laser Scanning ◽  
Low Density Lipoprotein ◽  
Density Lipoprotein ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Interface Barrier ◽  
Uptake Process ◽  
Static Conditions

The glycocalyx layer on the surface of an endothelial cell is an interface barrier for uptake of macromolecules, such as low-density lipoprotein and albumin, in the cell. The shear-dependent uptake of macromolecules thus might govern the function of the glycocalyx layer. We therefore studied the effect of glycocalyx on the shear-dependent uptake of macromolecules into endothelial cells. Bovine aorta endothelial cells were exposed to shear stress stimulus ranging from 0.5 to 3.0 Pa for 48 h. The albumin uptake into the cells was then measured using confocal laser scanning microscopy, and the microstructure of glycocalyx was observed using electron microscopy. Compared with the uptake into endothelial cells under static conditions (no shear stress stimulus), the albumin uptake at a shear stress of 1.0 Pa increased by 16% and at 3.0 Pa decreased by 27%. Compared with static conditions, the thickness of the glycocalyx layer increased by 70% and the glycocalyx charge increased by 80% at a shear stress of 3.0 Pa. The albumin uptake at a shear stress of 3.0 Pa for cells with a neutralized (no charge) glycocalyx layer was almost twice that of cells with charged layer. These findings indicate that glycocalyx influences the albumin uptake at higher shear stress and that glycocalyx properties (thickness and charge level) are involved with the shear-dependent albumin uptake process.

Sign in / Sign up

Export Citation Format

Share Document