scholarly journals Oil as the result of lithogenesis complicated by intensification of tectonic-hydrothermal activity (on the example of Western Siberia)

2021 ◽  
Vol 21 (4) ◽  
pp. 264-273
Author(s):  
Aleksandr D. Korobov ◽  
◽  
Lydmila A. Korobova ◽  
Keyword(s):  
Western Siberia ◽  
Vitrinite Reflectance ◽  
Hydrothermal Activity ◽  
Natural System ◽  
Source Rocks ◽  
Lateral Migration ◽  
Liquid Hydrocarbons ◽  
Temperature Zone ◽  
Deposit Formation ◽  
Intensity Index

The paper is meant to prove that structural reconstruction of riftogenic basins is accompanied by the intensification of tectonichydrothermal activity. It controls the mobility of gaseous-liquid hydrocarbons during their primary and lateral migration in the process of deposit formation. The intensity index of tectonic-hydrothermal activation is equal to the ratio of maximum paleotemperatures of gaseous-liquid inclusions to the paleotemperatures calculated from vitrinite reflectance values. This parameter determined in the same intervals of a geologic section reflects the level of paleothermal incongruity in the natural system. It can be used to make predictive estimates of the areas for hydrocarbon materials. The values of this parameter vary in the range of 1.5–2.5 in promising riftogenic areas with the source rocks in the temperature zone of 80–160°С due to conducive heating.

Oil to Source Rock Correlation Using Biomarker Data Through Pattern Matching and Fingerprinting Analysis in “Kitkat” Field, Jabung Block, South Sumatra Basin

2020 ◽  
Author(s):  
S., R. Muthasyabiha
Keyword(s):  
Pattern Matching ◽  
Source Rock ◽  
Vitrinite Reflectance ◽  
Hydrocarbon Exploration ◽  
Source Rocks ◽  
Maturity Level ◽  
Fingerprinting Analysis ◽  
Kerogen Type ◽  
Oil Characteristics ◽  
Biomarker Data

Geochemical analysis is necessary to enable the optimization of hydrocarbon exploration. In this research, it is used to determine the oil characteristics and the type of source rock candidates that produces hydrocarbon in the “KITKAT” Field and also to understand the quality, quantity and maturity of proven source rocks. The evaluation of source rock was obtained from Rock-Eval Pyrolysis (REP) to determine the hydrocarbon type and analysis of the value of Total Organic Carbon (TOC) was performed to know the quantity of its organic content. Analysis of Tmax value and Vitrinite Reflectance (Ro) was also performed to know the maturity level of the source rock samples. Then the oil characteristics such as the depositional environment of source rock candidate and where the oil sample develops were obtained from pattern matching and fingerprinting analysis of Biomarker data GC/GCMS. Moreover, these data are used to know the correlation of oil to source rock. The result of source rock evaluation shows that the Talangakar Formation (TAF) has all these parameters as a source rock. Organic material from Upper Talangakar Formation (UTAF) comes from kerogen type II/III that is capable of producing oil and gas (Espitalie, 1985) and Lower Talangakar Formation (LTAF) comes from kerogen type III that is capable of producing gas. All intervals of TAF have a quantity value from very good–excellent considerable from the amount of TOC > 1% (Peters and Cassa, 1994). Source rock maturity level (Ro > 0.6) in UTAF is mature–late mature and LTAF is late mature–over mature (Peters and Cassa, 1994). Source rock from UTAF has deposited in the transition environment, and source rock from LTAF has deposited in the terrestrial environment. The correlation of oil to source rock shows that oil sample is positively correlated with the UTAF.

Burial History Reconstruction of the Appalachian Basin in Kentucky, West Virginia, Pennsylvania, and New York, Using 1D Petroleum System Models

2019 ◽  
Vol 56 (4) ◽  
pp. 365-396
Author(s):  
Debra Higley ◽  
Catherine Enomoto
Keyword(s):  
New York ◽  
Vitrinite Reflectance ◽  
Structural Complexity ◽  
Appalachian Basin ◽  
Source Rocks ◽  
Burial History ◽  
Gas Generation ◽  
Deep Basin ◽  
Utica Shale ◽  
Wet Gas

Nine 1D burial history models were built across the Appalachian basin to reconstruct the burial, erosional, and thermal maturation histories of contained petroleum source rocks. Models were calibrated to measured downhole temperatures, and to vitrinite reflectance (% Ro) data for Devonian through Pennsylvanian source rocks. The highest levels of thermal maturity in petroleum source rocks are within and proximal to the Rome trough in the deep basin, which are also within the confluence of increased structural complexity and associated faulting, overpressured Devonian shales, and thick intervals of salt in the underlying Silurian Salina Group. Models incorporate minor erosion from 260 to 140 million years ago (Ma) that allows for extended burial and heating of underlying strata. Two modeled times of increased erosion, from 140 to 90 Ma and 23 to 5.3 Ma, are followed by lesser erosion from 5.3 Ma to Present. Absent strata are mainly Permian shales and sandstone; thickness of these removed layers increased from about 6200 ft (1890 m) west of the Rome trough to as much as 9650 ft (2940 m) within the trough. The onset of oil generation based on 0.6% Ro ranges from 387 to 306 Ma for the Utica Shale, and 359 to 282 Ma for Middle Devonian to basal Mississippian shales. The ~1.2% Ro onset of wet gas generation ranges from 360 to 281 Ma in the Utica Shale, and 298 to 150 Ma for Devonian to lowermost Mississippian shales.

Hydrothermal activity in the Upper Permian Ravnefjeld Formation of central East Greenland – a study of sulphide morphotypes

1998 ◽  
pp. 81-87
Author(s):  
Jesper Kresten Nielsen ◽  
Mikael Pedersen
Keyword(s):  
Base Metal ◽  
Early Period ◽  
Sedimentary Basins ◽  
Hydrothermal Activity ◽  
Source Rocks ◽  
Upper Permian ◽  
Thermal Activity ◽  
East Greenland ◽  
The North ◽  
Alum Shale

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Kresten Nielsen, J., & Pedersen, M. (1998). Hydrothermal activity in the Upper Permian Ravnefjeld Formation of central East Greenland – a study of sulphide morphotypes. Geology of Greenland Survey Bulletin, 180, 81-87. https://doi.org/10.34194/ggub.v180.5090 _______________ Bituminous shales of the Ravnefjeld Formation were deposited in the subsiding East Greenland basin during the Upper Permian. The shales are exposed from Jameson Land in the south (71°N; Fig. 1) to Clavering Ø in the north (74°20′N) and have attracted considerable attention due to their high potential as hydrocarbon source rocks (Piasecki & Stemmerik 1991; Scholle et al. 1991; Christiansen et al. 1992, 1993a, b). Furthermore, enrichment of lead, zinc and copper has been known in the Ravnefjeld Formation on Wegener Halvø since 1968 (Lehnert-Thiel 1968; Fig. 1). This mineralisation was assumed to be of primary or early diagenetic origin due to similarities with the central European Kupferschiefer (Harpøth et al. 1986). Later studies, however, suggested base metal mineralisation in the immediately underlying carbonate reefs to be Tertiary in age (Stemmerik 1991). Due to geographical coincidence between the two types of mineralisation, a common history is a likely assumption, but a timing paradox exists. A part of the TUPOLAR project on the ‘Resources of the sedimentary basins of North and East Greenland’ has been dedicated to re-investigation of the mineralisation in the Ravnefjeld Formation in order to determine the genesis of the mineralisation and whether or not primary or early diagenetic base metal enrichment has taken place on Wegener Halvø, possibly in relation to an early period of hydrothermal activity. One approach to this is to study the various sulphides in the Ravnefjeld Formation; this is carried out in close co-operation with a current Ph.D. project at the University of Copenhagen, Denmark. Diagenetically formed pyrite is a common constituent of marine shales and the study of pyrite morphotypes has previously been successful from thermalli immature parts of elucidating depositional environment and thermal effects in the Alum Shale Formation of Scandinavia (Nielsen 1996; Nielsen et al. 1998). The present paper describes the preliminary results of a similar study on pyrite from thermally immature parts of the Ravnefjeld Formation which, combined with the study of textures of base metal sulphides in the Wegener Halvø area (Fig. 1), may provide an important step in the evaluation of the presence or absence of early thermal activity on (or below) the Upper Permian sea floor.

Evidence from the Changing Carbon Isotopic of Kerogen, Oil, and Gas during Hydrous Pyrolysis from Pinghu Formation, the Xihu Sag, East China Sea Basin

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8317
Author(s):  
Qiang Cao ◽  
Jiaren Ye ◽  
Yongchao Lu ◽  
Yang Tian ◽  
Jinshui Liu ◽  
...  
Keyword(s):  
Carbon Isotopes ◽  
Oil And Gas ◽  
Thermal Evolution ◽  
Vitrinite Reflectance ◽  
Heating Time ◽  
Source Rocks ◽  
Evolution Process ◽  
Carbon Isotopic ◽  
Hydrous Pyrolysis ◽  
Increasing Temperature

Semi-open hydrous pyrolysis experiments on coal-measure source rocks in the Xihu Sag were conducted to investigate the carbon isotope evolution of kerogen, bitumen, generated expelled oil, and gases with increasing thermal maturity. Seven corresponding experiments were conducted at 335 °C, 360 °C, 400 °C, 455 °C, 480 °C, 525 °C, and 575 °C, while other experimental factors, such as the heating time and rate, lithostatic and hydrodynamic pressures, and columnar original samples were kept the same. The results show that the simulated temperatures were positive for the measured vitrinite reflectance (Ro), with a correlation coefficient (R2) of 0.9861. With increasing temperatures, lower maturity, maturity, higher maturity, and post-maturity stages occurred at simulated temperatures (Ts) of 335–360 °C, 360–400 °C, 400–480 °C, and 480–575 °C, respectively. The increasing gas hydrocarbons with increasing temperature reflected the higher gas potential. Moreover, the carbon isotopes of kerogen, bitumen, expelled oil, and gases were associated with increased temperatures; among gases, methane was the most sensitive to maturity. Ignoring the intermediate reaction process, the thermal evolution process can be summarized as kerogen0(original) + bitumen0(original)→kerogenr (residual kerogen) + expelled oil (generated) + bitumenn+r (generated + residual) + C2+(generated + residual) + CH4(generated). Among these, bitumen, expelled oil, and C2-5 acted as reactants and products, whereas kerogen and methane were the reactants and products, respectively. Furthermore, the order of the carbon isotopes during the thermal evolution process was identified as: δ13C1 < 13C2-5 < δ13Cexpelled oil < δ13Cbitumen < δ13Ckerogen. Thus, the reaction and production mechanisms of carbon isotopes can be obtained based on their changing degree and yields in kerogen, bitumen, expelled oil, and gases. Furthermore, combining the analysis of the geochemical characteristics of the Pinghu Formation coal–oil-type gas in actual strata with these pyrolysis experiments, it was identified that this area also had substantial development potential. Therefore, this study provides theoretical support and guidance for the formation mechanism and exploration of oil and gas based on changing carbon isotopes.

Paleoredox conditions, hydrothermal history, and target vectoring in the Macmillan Pass base-metal district, Yukon, Canada: 2 – Pyrite paragenesis and mineral chemistry

2021 ◽  
Vol 59 (5) ◽  
pp. 1233-1259
Author(s):  
Claire Leighton ◽  
Daniel Layton-Matthews ◽  
Jan M. Peter ◽  
Michael G. Gadd ◽  
Alexandre Voinot ◽  
...  
Keyword(s):  
Trace Element ◽  
Inductively Coupled Plasma ◽  
Mineral Chemistry ◽  
Hydrothermal Activity ◽  
Unconsolidated Sediments ◽  
Lateral Migration ◽  
Sulfide Mineralization ◽  
Ambient Seawater ◽  
Clastic Sediment ◽  
Icp Ms

ABSTRACT The MacMillan Pass district in Yukon, Canada, hosts the Tom and Jason clastic sediment-hosted Zn-Pb-Ag-(Ba) deposits. Pyrite-bearing drill core samples were collected from seven drill holes that intersected sulfide mineralization and time-stratigraphically equivalent rocks at varied spatial distances extending up to 3 km away from the deposits to assess the relative timing of pyrite mineralization and the chemistry of pyrite paragenesis. There are four pyrite morphologies: framboids and polyframboids (Py1), subhedral to euhedral inclusion-free crystals (Py2a), silicate inclusion-bearing nodules with serrated edges (Py2b), and euhedral idiomorphic overgrowths on preexisting pyrite morphologies (Py3). These morphological varieties correspond in time from syngenetic to earliest diagenetic growth (Py1), early to late diagenetic growth (Py2a, Py2b), and metamorphic crystallization and/or recrystallization of previous textural varieties (Py3). A representative subset of pyrite grains was analyzed for trace element contents and distributions by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). Analyses by LA-ICP-MS reveal that each textural variety of pyrite has a distinct trace element composition that also varies depending on stratigraphic unit. A suite of clastic sediment-hosted sulfide mineralization-related elements was incorporated into Py2 within sulfide mineralized units at greater abundances than that in unmineralized units (e.g., Zn, As, Pb, Tl, Bi). Lead abundances and Pb/Se and As/Mo values in pyrite are the most robust vectoring tools documented. The timing for clastic sediment-hosted Zn-Pb mineralization was syn and/or post late diagenesis (Py2b). A Ba-enriched horizon was identified in rocks and this is interpreted to be the distal time-stratigraphic equivalent unit to Zn-Pb mineralization. The Ba-enriched horizon contains Py2 with anomalous metal (Tl, Co, Mn, Cd, Zn, Sb) contents and abundant macroscopic baryte, and it is interpreted to represent the distal expression of sulfide mineralization-forming hydrothermal activity. Four genetic models for mineralization are reviewed; however, the only model that is consistent with our whole rock and pyrite geochemistry involves venting of buoyant hydrothermal fluid, mixing with ambient seawater, and remaining or sinking into unconsolidated sediments, with lateral migration up to 2–3 km from the vent source.

scholarly journals Thermal Maturation Regime Revisited in the Dongying Depression, Bohai Bay Basin, East China

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Haiping Huang ◽  
Hong Zhang ◽  
Zheng Li ◽  
Mei Liu
Keyword(s):  
Organic Geochemistry ◽  
Vitrinite Reflectance ◽  
Source Rocks ◽  
East China ◽  
Burial Depth ◽  
Bohai Bay ◽  
Hydrocarbon Generation ◽  
Bohai Bay Basin ◽  
Dongying Depression ◽  
Hydrocarbon Maturation

To the accurate reconstruction of the hydrocarbon generation history in the Dongying Depression, Bohai Bay Basin, East China, core samples of the Eocene Shahejie Formation from 3 shale oil boreholes were analyzed using organic petrology and organic geochemistry methods. The shales are enriched in organic matter with good to excellent hydrocarbon generation potential. The maturity indicated by measured vitrinite reflectance (%Ro) falls in the range of 0.5–0.9% and increases with burial depth in each well. Changes in biomarker and aromatic hydrocarbon isomer distributions and biomarker concentrations are also unequivocally correlated with the thermal maturity of the source rocks. Maturity/depth relationships for hopanes, steranes, and aromatic hydrocarbons, constructed from core data indicate different well locations, have different thermal regimes. A systematic variability of maturity with geographical position along the depression has been illustrated, which is a dependence on the distance to the Tanlu Fault. Higher thermal gradient at the southern side of the Dongying Depression results in the same maturity level at shallower depth compared to the northern side. The significant regional thermal regime change from south to north in the Dongying Depression may exert an important impact on the timing of hydrocarbon maturation and expulsion at different locations. Different exploration strategies should be employed accordingly.

Residual Water Saturation of Source Rocks of the Bazhenov Formation Western Siberia, Russia

2021 ◽  
Author(s):  
Anton Vasilievich Glotov ◽  
Anton Gennadyevich Skripkin ◽  
Petr Borisovich Molokov ◽  
Nikolay Nilovich Mikhailov
Keyword(s):  
Western Siberia ◽  
Water Saturation ◽  
Source Rocks ◽  
Rock Properties ◽  
Low Permeability ◽  
Residual Water ◽  
Bazhenov Formation ◽  
Rock Formation ◽  
Low Permeability Reservoirs ◽  
Significant Underestimation

Abstract The article presents a new method of determining the residual water saturation of the Bazhenov Rock Formation using synchronous thermal analysis which is combined with gas IR and MS spectroscopy. The efficiency of the extraction-distillation method of determining open porous and residual saturation in comparison with the developed method which are considered in detail. Based on the results of studies in the properties of the Bazhenov Rock Formation, a significant underestimation of the residual water saturation in the existing guidelines for calculating reserves was found, and the structure of the saturation of rocks occurred to be typical for traditional low-permeability reservoirs. The values of open porous and residual water saturation along the section of the Bazhenov Formation vary greatly, which also contradicts the well-established opinion about the weak variability of the rock properties with depth.

scholarly journals Biomarkers and C and S Isotopes of the Permian to Triassic Solid Bitumen and Its Potential Source Rocks in NE Sichuan Basin

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Chunfang Cai ◽  
Chenlu Xu ◽  
Wenxiang He ◽  
Chunming Zhang ◽  
Hongxia Li
Keyword(s):  
Source Rock ◽  
Vitrinite Reflectance ◽  
Lower Triassic ◽  
Source Rocks ◽  
Upper Permian ◽  
Solid Bitumen ◽  
Lower Silurian ◽  
High Maturity ◽  
Gas Fields ◽  
Extractable Organic Matter

The potential parent source rocks except from Upper Permian Dalong Formation (P3d) for Upper Permian and Lower Triassic solid bitumen show high maturity to overmaturity with equivalent vitrinite reflectance (ERo) from 1.7% to 3.1% but have extractable organic matter likely not contaminated by younger source rocks. P3d source rocks were deposited under euxinic environments as indicated by the pyrite δ34S values as light as -34.5‰ and distribution of aryl isoprenoids, which were also detected from the Lower Silurian (S1l) source rock and the solid bitumen in the gas fields in the west not in the east. All the solid bitumen not altered by thermochemical sulfate reduction (TSR) has δ13C and δ34S values similar to part of the P3l kerogens and within the S1l kerogens. Thus, the eastern solid bitumen may have been derived from the P3l kerogens, and the western solid bitumen was likely to have precracking oils from P3l kerogens mixed with the S1l or P3d kerogens. This case-study tentatively shows that δ13C and δ34S values along with biomarkers have the potential to be used for the purpose of solid bitumen and source rock correlation in a rapidly buried basin, although further work should be done to confirm it.

STABLE HYDROGEN ISOTOPE RATIOS OF SEDIMENTARY HYDROCARBONS: A POTENTIAL METHOD FOR ASSESSING THERMAL MATURITY?

2005 ◽  
Vol 45 (1) ◽  
pp. 253
Author(s):  
D. Dawson ◽  
K. Grice ◽  
R. Alexander
Keyword(s):  
Vitrinite Reflectance ◽  
Potential Method ◽  
Source Rocks ◽  
Crude Oils ◽  
Thermal Maturity ◽  
Peak Oil ◽  
Data Set ◽  
High Maturity ◽  
The Difference ◽  
Hydrogen Isotope Ratios

A relationship has been identified between the maturity level of source rocks and the stable hydrogen isotopic compositions (δD) of extracted saturated hydrocarbons, based on the analysis of nine sediments and five crude oils from the Perth Basin (WA). The sediments cover the immature to late mature range. Distinct δD signatures are observed for the immature sediments where pristane and phytane are significantly depleted in deuterium (D) relative to the n-alkanes. With increasing maturity the difference between the δD values of n-alkanes and isoprenoids reduces as pristane and phytane become progressively enriched in D. The n-alkane–isoprenoid δD signature of the crude oils, including one from a different source facies, is similar to mature–late mature sediments representative of the peak oil–generative window. Enrichment of D in isoprenoids is attributed to isotopic exchange associated with thermal maturation. Average δD values of pristane and phytane correlate well with vitrinite reflectance, as does the biomarker maturity parameter Ts/Tm. The limited data set suggests that δD values of aliphatic hydrocarbons may be useful for establishing thermal maturity, particularly when other maturity parameters are not appropriate. Furthermore, we suggest δD values may be useful over a wider maturity range than traditional parameters, particularly at very high maturity where biomarker parameters are no longer effective.

COAL AS A SOURCE OF OIL AND GAS: A CASE STUDY FROM THE BASS BASIN, AUSTRALIA

2003 ◽  
Vol 43 (1) ◽  
pp. 117 ◽  
Author(s):  
C.J. Boreham ◽  
J.E. Blevin ◽  
A.P. Radlinski ◽  
K.R. Trigg
Keyword(s):  
Organic Matter ◽  
Oil And Gas ◽  
Middle Eocene ◽  
Vitrinite Reflectance ◽  
Mineral Resources ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Gas Generation ◽  
Australian Context ◽  
Effective Source

Only a few published geochemical studies have demonstrated that coals have sourced significant volumes of oil, while none have clearly implicated coals in the Australian context. As part of a broader collaborative project with Mineral Resources Tasmania on the petroleum prospectivity of the Bass Basin, this geochemical study has yielded strong evidence that Paleocene–Eocene coals have sourced the oil and gas in the Yolla, Pelican and Cormorant accumulations in the Bass Basin.Potential oil-prone source rocks in the Bass Basin have Hydrogen Indices (HIs) greater than 300 mg HC/g TOC. The coals within the Early–Middle Eocene succession commonly have HIs up to 500 mg HC/g TOC, and are associated with disseminated organic matter in claystones that are more gas-prone with HIs generally less than 300 mg HC/g TOC. Maturity of the coals is sufficient for oil and gas generation, with vitrinite reflectance (VR) up to 1.8 % at the base of Pelican–5. Igneous intrusions, mainly within Paleocene, Oligocene and Miocene sediments, produced locally elevated maturity levels with VR up to 5%.The key events in the process of petroleum generation and migration from the effective coaly source rocks in the Bass Basin are:the onset of oil generation at a VR of 0.65% (e.g. 2,450 m in Pelican–5);the onset of oil expulsion (primary migration) at a VR of 0.75% (e.g. 2,700–3,200 m in the Bass Basin; 2,850 m in Pelican–5);the main oil window between VR of 0.75 and 0.95% (e.g. 2,850–3,300 m in Pelican–5); and;the main gas window at VR >1.2% (e.g. >3,650 m in Pelican–5).Oils in the Bass Basin form a single oil population, although biodegradation of the Cormorant oil has resulted in its statistical placement in a separate oil family from that of the Pelican and Yolla crudes. Oil-to-source correlations show that the Paleocene–Early Eocene coals are effective source rocks in the Bass Basin, in contrast to previous work, which favoured disseminated organic matter in claystone as the sole potential source kerogen. This result represents the first demonstrated case of significant oil from coal in the Australian context. Natural gases at White Ibis–1 and Yolla–2 are associated with the liquid hydrocarbons in their respective fields, although the former gas is generated from a more mature source rock.The application of the methodologies used in this study to other Australian sedimentary basins where commercial oil is thought to be sourced from coaly kerogens (e.g. Bowen, Cooper and Gippsland basins) may further implicate coal as an effective source rock for oil.

Sign in / Sign up

Export Citation Format

Share Document