scholarly journals Physico-Chemical Characterization of Agricultural Residues as Precursors for Activated Carbon Preparation

Author(s):  
Roberto Antonio Canales Flores ◽  
Francisco Prieto García ◽  
Elena María Otazo Sánchez ◽  
Ana María Bolarín Miró ◽  
Otilio Arturo Acevedo Sandoval

Biomass is a promising alternative and renewable energy source that can be transformed into other value-added products such as activated carbon. In this research, barley husk, corn cob and Agave salmiana leaves were characterized to determine their chemical composition and morphology to evaluate their potentiality as precursors of activated carbons. Based on the main composition results obtained, the biomass samples have suitable chemical and physical characteristics to be considered as good precursors of activated carbons, such as carbon contents greater than 40%, ash content less than 10%, moisture content less than 30%, high volatile contents with values from 75 to 80% and a porous and fibrous morphology. The results indicate that the main compositions in the biomass were cellulose and lignin. The cellulose content was more than lignin (15–26%) for the residues selected. Specifically, a-cellulose contents with values from 52% to 79%, β-cellulose contents of 13–44%, γ-cellulose contents less than 11%, and holocellulose contents of 82–83% were determined. The thermal decomposition for the biomass samples proceeded with five stages attributed to the evaporation of some volatile compounds (70–150 ºC), to the degradation of hemicellulose (180–230 ºC), to the cellulose volatilization (250–350 ºC), to the lignin decomposition (380–550 ºC), and to the degradation of complex polymers and inorganic salts, respectively. The stage corresponding to the cellulose decomposition showed rapid mass decreased in the three residues. This results show that the cellulose and lignin content is another important parameter to evaluate the pyrolysis characteristics of a good precursor of activated carbon.

2014 ◽  
Vol 9 (1) ◽  
pp. 166-174 ◽  
Author(s):  
Rajeshwar M. Shrestha ◽  
Margit Varga ◽  
Imre Varga ◽  
Amar P. Yadav ◽  
Bhadra P. Pokharel ◽  
...  

Activated carbons were prepared from Lapsi seed stone by the treatment with H2SO4 and HNO3 for the removal of Ni (II) ions from aqueous solution. Two activated carbon have been prepared from Lapsi seed stones by treating with conc.H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of Ni(II) ions. Chemical characterization of the resultant activated carbons was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxyl, lactones and phenols in the carbons. The optimum pH for nickel adsorption is found to be 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Ni (II) on the resultant activated carbons was 28.25.8 mg g-1 with H2SO4 and 69.49 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Ni (II) from water. DOI: http://dx.doi.org/10.3126/jie.v9i1.10680Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 166–174


2018 ◽  
Vol 154 ◽  
pp. 01005 ◽  
Author(s):  
Fauzan Nazif ◽  
Mahmud Sudibandriyo

Indonesia is one of the countries with the highest levels of air pollution in the world. Air pollution in Indonesia, especially in Jakarta due to the number of private vehicles increased at least 10% every year. This air pollution can have an impact on public health. One effort to do as a protection of people health is to use a mask. Activated carbon can be coated to mask in order to improve the effectiveness in reducing the pollutants. One good material used as material for activated carbon is coconut shell. Selection of coconut shell as the raw material of activated carbon is also based on cellulose content of 26.06%, hemicellulose content 27.07% and a lignin content of 29.40% in the dry state. This research was done in some variation such as activation methods, activated carbon mass, and adhesive material types. Based on pollutants adsorption test, mask with 6 grams of activated carbon, chemically activated, and used TEOS as adhesive is the best variation that able to adsorb as much 76,25% of CO2 Pollutants. Mask made in this research, has saturation time as long as 4 hours under high CO2 concentration.


2019 ◽  
Vol 11 (9) ◽  
pp. 2672 ◽  
Author(s):  
Antonio Macías-García ◽  
Justo García-Sanz-Calcedo ◽  
Juan Pablo Carrasco-Amador ◽  
Raúl Segura-Cruz

In recent years, pharmaceutical products have been causing a serious environmental problem in hospital wastewater and water purification plants. The elimination of these pollutants is difficult due to their resistance to biological degradation. Paracetamol has been detected in higher concentrations in hospital wastewater than in other buildings. Activated carbons are a good material for removing paracetamol from hospital wastewater. One of the starting materials to obtain activated carbons is kenaf, which is an easy plant to cultivate. To study the elimination of paracetamol from hospital wastewater by activated carbon, the textural and chemical characterization of activated carbon, as well as the kinetic study and the analysis of the paracetamol adsorption mechanism by the adsorbent, have been carried out. The activated carbon samples studied are micro-mesoporous, with high specific surface values. The chemical composition with presence of oxygen groups favours the adsorption process. The adsorption kinetics were adjusted to a pseudo-second order model. The adsorption mechanism followed the intraparticular diffusion model, carried out in two stages: a fast first stage on the surface of the adsorbent and a slow one inside the pore. Based on the kinetic study, the use of this type of carbon is a good application for the removal of paracetamol from hospital wastewater.


2014 ◽  
Vol 695 ◽  
pp. 12-15 ◽  
Author(s):  
A.M. Abioye ◽  
Farid Nasir Ani

Biochar was produced from oil palm shell via microwave-induced pyrolysis. The biochar was subsequently activated via microwave assisted CO2 activation. A simple single layer arrangement of the microwave absorber (coconut shell based activated carbon) and oil palm shell in the reactor was adopted during pyrolysis. In recent times, the treatment of oil palm biomass using microwave heating technology has been on the increase. Value added products such as bio-oil, gas, biochar and activated carbon are being produced while at the same time serving as waste management control. Biochar is seen as a promising climate mitigation tool. Activated carbons can be used as absorbent for the removal of pollutants from wastewaters, as air pollution control and as electrode for supercapacitor. This paper presents comparative study between the characteristics of oil palm shell biochar and oil palm shell activated carbon. BET surface area and Scanning Electron Microscopy (SEM) were analyzed to establish the characteristics of the biochar and activated carbon.


2013 ◽  
Vol 28 ◽  
pp. 94-101 ◽  
Author(s):  
Rajeshwar Man Shrestha ◽  
Raja Ram Pradhananga ◽  
Margit Varga ◽  
Imre Varga

The present study deals with the use of activated carbons prepared from Lapsi seed stone as adsorbents for the removal of Pb (II) ions from aqueous solution. Two series of carbon have been prepared from Lapsi seed stones by treating with conc. H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of metal ions. Chemical characterization of the resultant activated carbon was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxylic, lactonic, phenolic in the carbons. The effect of pH and initial metal ion concentration on the adsorption was studied in a batch process mode. The optimum pH for lead adsorption is found to be equal to 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Pb (II) on the resultant activated carbons was 277.8 mg g-1 with H2SO4 and 423.7 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Pb (II) from water. DOI: http://dx.doi.org/10.3126/jncs.v28i0.8114 Journal of Nepal Chemical Society Vol. 28, 2011 Page: 94-101 Uploaded Date: May 24, 2013


2020 ◽  
Vol 7 (3) ◽  
pp. 290-303
Author(s):  
Mayanglambam Manolata Devi ◽  
Nidhi Aggarwal ◽  
Shunmugavel Saravanamurugan

: Carbonaceous materials are proven to be vital in day-to-day life as well as in advanced science and technology applications. Rice straw, a secondary agricultural lignocellulosic biomass, has drawn great attention for the production of value-added carbonaceous material. Because, it can provide an alternative economic, greener and sustainable resource of carbon to non-renewable fossil fuelbased precursors while controlling the worsening situation of environmental pollution due to improper disposal and stubble burning. In this review, recent developments in the production of carbonaceous materials from rice straw are presented. Biochar and activated carbon were reported to be the prime carbonaceous materials prepared from the rice straw. Thus, pyrogenic preparation of biochar and the influence of its pyrolysis temperature to the yield, composition, surface area, porosity and morphology are preliminarily discussed. This is followed by a detailed discussion on the preparation of activated carbon with an emphasis on the influencing reaction factors for improving the characteristic properties of the activated carbons. Additionally, the major characterization techniques dealing with determining the surface area and porosity (BET analyzer) and microstructure (secondary electron microscope (SEM) and transmission electron microscope (TEM)) for both the carbonaceous materials are also discussed. Finally, major applications of both the carbonaceous materials are briefly reviewed. Thus, the present review clearly highlights the usefulness of agricultural lignocellulosic waste rice straw for the conversion of waste to value-added carbonaceous materials.


2015 ◽  
Vol 799-800 ◽  
pp. 47-51
Author(s):  
M.S. Mohammed Yahya ◽  
Jeyashelly Andas ◽  
Ghani Zaidi Ab

In this study, highly porous activated carbon was prepared fromCyrtospermachamissonispetioles via single step H3PO4activation. The effect of impregnation temperature (RT – 90 °C) on the yield, porosity and surface area was investigated. The synthesized activated carbons were characterized by Na2S2O3volumetric method, SEM/EDX and N2adsorption-desorption analyses. The optimization investigation clearly showed that the impregnation temperature affected on the yield and the specific surface area of the materials. Under the optimum impregnation temperature of 75 °C, the registered iodine number and BET surface area were 1129.23 mgg-1and 1390.41 m2g-1respectively with yield percentage of 35.82. This preliminary study proves the successful conversion of plant waste into value added porous materials.


Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7811
Author(s):  
Joanna Sreńscek-Nazzal ◽  
Adrianna Kamińska ◽  
Piotr Miądlicki ◽  
Agnieszka Wróblewska ◽  
Karolina Kiełbasa ◽  
...  

DT0-activated carbons modified with HCl and HNO3 acids, which were used for the first time in the catalytic process of alpha-pinene isomerization, are presented in this study. The carbon materials DT0, DT0_HCl, DT0_HNO3, and DT0_HCl_HNO3 were examined with the following methods: XRF, SEM, EDX, XPS, FT-IR, XRD, and N2 adsorption at −196 °C. It was shown that DT0_HCl_HNO3-activated carbon was the most active material in the alpha-pinene isomerization process. Detailed studies of alpha-pinene isomerization were carried out over this carbon by changing the reaction parameters such as time (5–180 min) and temperature (60–175 °C). The 100% conversion of alpha-pinene was achieved at the temperature of 160 °C and catalyst content of 5 wt% after 3 h over the DT0_HCl_HNO3 catalyst. Camphene and limonene were the main products of the alpha-pinene isomerization reaction.


2021 ◽  
Vol 3 (1) ◽  
pp. 169-173
Author(s):  
N. Selvanathan ◽  
N.S. Subki ◽  
M.A. Sulaiman

Dyes are used extensively in many industries making the research on color production more important. Despite that, dyes are important class of pollutant in which it is disposed in water resources and causes major environmental problems due to toxicity and carcinogenic property of dye. However, the disposed dye into the environment can be treated by several alternatives. In this study, activated carbon derived from pineapple crown, core and peel were prepared by chemical activation using phosphoric acid (H3PO4). Laboratory prepared activated carbons were used to identify the suitability of its application to adsord methylene blue and malachite green. The results indicated that the activated carbon derived from pineapple crown shows maximum adsorption of methylene blue (38.6%) and malachite green. This study shows a benefit of transforming agriculture waste to value added product and also helps to solve over abundance pineapple waste problem.


Sign in / Sign up

Export Citation Format

Share Document