Low-cost moulage in Healthcare Simulation: Review of Its Use, Utility, and Perceptions

Author(s):  
Aamena Jariwala ◽  
Youness Zidoun ◽  
Jalal Alfroukh ◽  
Sharon Mascarenhas ◽  
Nabil Zary

Background: Simulation plays a crucial role in health studies, as it helps medical students apply their theoretical knowledge in real-life situations. Moulage is one of the techniques that helps in making simulation more realistic or high-fidelity. It uses special effects to emulate wounds for a better understanding of what the wound is like visually. Still, moulage is expensive, time-consuming, resource-intensive, and requires the training of staff, which is why we need to find low-cost substitutes for moulage materials. Method: When searching the database “PubMed” for the terms “Low-cost and Medical moulage”, we retrieved 222 studies, out of which when excluding results not related to low-cost, we obtained 62 studies, from which when removing studies that do not contain information regarding moulage, we found two papers, after referring to citations and cited articles of those papers, we ended up with six studies. Based on the selected articles and additional articles sourced from their reference list, a total of 11 studies were included in the review. Results: We understand that moulage is a technique that helps make simulations come alive, but the resources required to use it are at times, expensive, which is why we need to find methods to do low-cost moulage, and many studies address that it can be as simple as using homemade ingredients. Students from a previous study have talked about their opinions regarding the realistic component of moulage and whether if it is any different from other moulages. Most of the students agreed that the moulage ranked well in face and content validity. However, further innovations must be introduced in the field to be widely spread and lead to newer opportunities. Conclusion: Although the research done under moulage is limited, it is accepted that moulage is helpful for simulation-based studies and that low-cost moulage can help make medical studies a better experience for students studying it. Students have a favorable opinion on the realistic aspect of the low-cost moulage applied to them. Newer methods can be introduced to moulage, and it can be implemented in low-income countries.

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3774
Author(s):  
Pavlos Topalidis ◽  
Cristina Florea ◽  
Esther-Sevil Eigl ◽  
Anton Kurapov ◽  
Carlos Alberto Beltran Leon ◽  
...  

The purpose of the present study was to evaluate the performance of a low-cost commercial smartwatch, the Xiaomi Mi Band (MB), in extracting physical activity and sleep-related measures and show its potential use in addressing questions that require large-scale real-time data and/or intercultural data including low-income countries. We evaluated physical activity and sleep-related measures and discussed the potential application of such devices for large-scale step and sleep data acquisition. To that end, we conducted two separate studies. In Study 1, we evaluated the performance of MB by comparing it to the GT3X (ActiGraph, wGT3X-BT), a scientific actigraph used in research, as well as subjective sleep reports. In Study 2, we distributed the MB across four countries (Austria, Germany, Cuba, and Ukraine) and investigated physical activity and sleep among these countries. The results of Study 1 indicated that MB step counts correlated highly with the scientific GT3X device, but did display biases. In addition, the MB-derived wake-up and total-sleep-times showed high agreement with subjective reports, but partly deviated from GT3X predictions. Study 2 revealed similar MB step counts across countries, but significant later wake-up and bedtimes for Ukraine than the other countries. We hope that our studies will stimulate future large-scale sensor-based physical activity and sleep research studies, including various cultures.


2018 ◽  
Vol 49 (3) ◽  
pp. 201-212
Author(s):  
Ana Carolina Amaya Arias ◽  
Óscar Zuluaga ◽  
Douglas Idárraga ◽  
Javier Hernando Eslava Schmalbach

Introduction: Most maternal deaths that occur in developing countries are considered unfair and can be avoided. In 2008, The World Health Organization (WHO) proposed a checklist for childbirth care, in order to assess whether a simple, low-cost intervention had an impact on maternal and neonatal mortality in low-income countries. Objective: To translate, adapt and validate the content of the WHO Safe Childbirth Checklist (SCC) for its use in Colombia Methods: The checklist was translated and adapted to the Colombian context. It was subsequently validated by a panel of experts composed of 17 health workers with experience in maternal and neonatal care and safety. Reliability among judges was estimated (Rwg) and items were modified or added to each section of the list according to the results. Results: Modifications were made to 28 items, while 19 new items were added, and none was removed. The most important modifications were made to the management guidelines included in each item, and the items added refer to risks inherent to our environment. Conclusion: The Colombian version of the SCC will be a useful tool to improve maternal and neonatal care and thereby contribute to reducing maternal and neonatal morbidity and mortality in our country.


Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 429 ◽  
Author(s):  
Charles Nanseu-Njiki ◽  
Willis Gwenzi ◽  
Martin Pengou ◽  
Mohammad Rahman ◽  
Chicgoua Noubactep

Inadequate access to safe drinking water is one of the most pervasive problems currently afflicting the developing world. Scientists and engineers are called to present affordable but efficient solutions, particularly applicable to small communities. Filtration systems based on metallic iron (Fe0) are discussed in the literature as one such viable solution, whether as a stand-alone system or as a complement to slow sand filters (SSFs). Fe0 filters can also be improved by incorporating biochar to form Fe0-biochar filtration systems with potentially higher contaminant removal efficiencies than those based on Fe0 or biochar alone. These three low-cost and chemical-free systems (Fe0, biochar, SSFs) have the potential to provide universal access to safe drinking water. However, a well-structured systematic research is needed to design robust and efficient water treatment systems based on these affordable filter materials. This communication highlights the technology being developed to use Fe0-based systems for decentralized safe drinking water provision. Future research directions for the design of the next generation Fe0-based systems are highlighted. It is shown that Fe0 enhances the efficiency of SSFs, while biochar has the potential to alleviate the loss of porosity and uncertainties arising from the non-linear kinetics of iron corrosion. Fe0-based systems are an affordable and applicable technology for small communities in low-income countries, which could contribute to attaining self-reliance in clean water supply and universal public health.


2014 ◽  
Vol 5 (1) ◽  
pp. 28-38 ◽  
Author(s):  
L. Guerrero-Latorre ◽  
M. Rusiñol ◽  
A. Hundesa ◽  
M. Garcia-Valles ◽  
S. Martinez ◽  
...  

Household-based water treatment (HWT) is increasingly being promoted to improve water quality and, therefore, health status in low-income countries. Ceramic water filters (CWFs) are used in many regions as sustainable HWT and have been proven to meet World Health Organization (WHO) microbiological performance targets for bacterial removal (2–4 log); however, the described viral removal efficiencies are insufficient to significantly reduce the associated risk of viral infection. With the objective of improving the viral removal efficiencies of ceramic water filters, new prototypes with different oxide compositions and firing atmospheres have been developed and evaluated. For removal efficiencies human adenoviruses, MS2 bacteriophage and Escherichia coli were quantified in all prototypes. A new model of CWF that was fired in a reductive atmosphere presented virus and bacteria removal efficiencies greater than 3.0 log and 2.5 log, respectively, which would fulfill the viral targets that are recommended by the WHO. Ceramic characterization of the selected filters, which were fired in a reductive atmosphere, showed that a larger specific surface area than those of control filters and higher fraction of a positive Z-potential fraction are the most likely explanations for this increase in virus removal.


2017 ◽  
Vol 4 ◽  
pp. 205566831770642
Author(s):  
Kazuhiko Sasaki ◽  
Jutamat Pinitlertsakun ◽  
Pakwan Nualnim ◽  
Gary Guerra ◽  
Yuttapichai Sansook ◽  
...  

Background The alignment of the lower limb prosthesis is an integral part of the prosthetic fitting. A properly aligned prosthesis contributes to optimal gait and overall function of the patient. The current offering of alignment componentry is expensive for low-income countries. The purpose of this study was to develop a lightweight and low-cost alignment coupler for the lower limb prosthesis. Methods An alignment coupler called the reversible adjustable coupling was designed and manufactured. Measurements of total anterior/posterior and medial/lateral and rotation in prostheses were recorded and mechanical testing performed. Swiftness and difficulty of use was also recorded. Results The reversible adjustable coupling permitted acceptable ranges of anterior/posterior and medial/lateral translation and 30° of internal and external rotation of prosthetic componentry. Repetitive loading of the coupling at a speed of 1 Hz under 1.28 kN load for 2000 cycles was successful, as were static and strength tests. Discussion The coupler provided acceptable ranges of anterior/posterior and medial/lateral and rotation adjustment and is acceptable for potential use in the alignment of both exoskeletal and endoskeletal prosthesis. The final weight of the component was 166 g and cost of $55.00 USD is affordable for low-income countries for use in clinical and educational settings.


2015 ◽  
Vol 49 (3) ◽  
pp. 147-154
Author(s):  
Zakariya Kaneesamkandi

High initial cost is one of the reasons why consumers think twice before investing on the conventional solar water heating systems, especially in low income countries. Integrated collector storage systems are available at a lesser cost, but with a penalty of decreased efficiency. In this paper, yet another attempt to reduce cost of solar water heating system has been made by using independent plane reflectors along with an insulated storage tank provided with a heat absorbing aperture. With no tracking arrangement, this system uses only the intense beam radiation available from 9:00 AM to 3:00 PM with a concentration factor of 10. A theoretical study was conducted using commercial computational fluid dynamics software which was followed by an experimental validation of the results. The theoretical results were in agreement with the experimental results. The efficiency of this system was less than collector storage systems reported in the literature by about 10-15%. Maximum average tank temperature of 350 K and efficiency of 0.61 was obtained. Overall loss coefficient was identical with that of existing integrated collector storage systems. DOI: http://dx.doi.org/10.3329/bjsir.v49i3.22128 Bangladesh J. Sci. Ind. Res. 49(3), 147-154, 2014


2018 ◽  
Vol 1 (5) ◽  
pp. 7-11
Author(s):  
Andreas Petropoulos

Introduction: Preventive medicine is the ideal way in dealing with frequent and fatal diseases. Congenital heart disease (CHD) is responsible for the largest proportion of mortality caused by birth defects in the first year of life. Actual numbers and mortality from CHD is increasing. In the developed world the treatment of CHD has escalating costs for health care systems and private covered patients, while in low-income countries the resources are minimal. Prevention/early detection is urgently needed to tackle the increasing needs. Aim: To justify why pulse oximetry (pox) is the best available, early detecting postnatal screening test currently. Conclusion: Although CHD’s are both frequent and carry a high morbidity and mortality, we still lack a single, easy to apply, non-invasive and low-cost screening test, worldwide. The most advantageous method for minimizing CHD deaths worldwide seems to be currently, the combination of clinical assessment with pox. Original publication: https://crimsonpublishers.com/ojchd/pdf/OJCHD.000510.pdf Open Journal of Cardiology and Heart Diseases.


2019 ◽  
Author(s):  
Emmanuel Egiru ◽  
Francis Okello ◽  
Juliet Ikiror ◽  
Linda Acom ◽  
Kate SM Loe ◽  
...  

Abstract Background Complications of prematurity are the leading cause of deaths in children under the age of five. The predominant reason for these preterm deaths is respiratory distress syndrome (RDS). In low-income countries (LICs) there are limited treatment options for RDS. Due to their simplicity and affordability, low-cost bubble continuous positive airway pressure (bCPAP) devices have been introduced in neonatal units in LICs to treat RDS. This study is the first observational study from a LIC to compare outcomes of preterm neonates in pre- and post-CPAP periods. Methods This was a retrospective study in Mbale Regional Referral Hospital Neonatal Unit (MRRH-NNU), a government hospital in eastern Uganda. Two study periods were identified. A 14-month study period beginning at the opening of MRRH-NNU and covering the period until bCPAP was introduced (pre-bCPAP) and an 18-month period after bCPAP was introduced (post-bCPAP). After the introduction of bCPAP, it was applied to preterm neonates with RDS when clinically indicated and if a device was available. Clinical features and outcomes of all neonates <1500g were compared before and after the introduction of bCPAP. Results The admission records of 377 preterm neonates <1500g were obtained. 158 were admitted in pre-bCPAP period and 219 after. The mortality rate in pre- bCPAP period was 39.2% (62/158) compared with 26.5% (58/219, P=0.012) in post-bCPAP period. There were no differences in birthweight, sex, presence of signs of respiratory distress or apnoea between the two groups. Conclusion Specialized and resource-appropriate neonatal care that appropriately addresses the challenges of healthcare provision in LICs has the potential to reduce neonatal deaths. The use of a low-cost bCPAP to treat RDS in preterm neonates <1500g resulted in a significant improvement in their survival in a neonatal unit in eastern Uganda. Implementing bCPAP with adequate training and supervision could significantly reduce preterm mortality in LICs.


2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Pedro Surriabre ◽  
Andrea Torrico ◽  
Tania Vargas ◽  
Fuantina Ugarte ◽  
Patricia Rodriguez ◽  
...  

Abstract Background HPV test implementation as a primary screening tool has the potential to decrease cervical cancer incidence as shown by several studies around the world. However, in many low-resource settings, the HPV test introduction has been backed down mainly due to its price. In this study, we present a novel low-cost strategy involving simple devices and techniques for high-risk human papillomavirus (HR-HPV) detection. The analytical performance to detect HR-HPV infections of this novel strategy was assessed by comparing it with the Hybrid Capture 2 system (HC2), which is used as gold standard. Methods Paired-cervical samples were collected from 541 women assisting to gynecological services in an outpatient clinic. One sample was transported in the Hybrid Capture Standard Transport Medium for HR-HPV detection by the HC2. The second sample was transported on glass slide for detection by PCR-based techniques (GP-EIA, BSGP-EIA and pU 1 M-L/2R). Results The level of agreement between the PCR-based techniques and HC2 system was determined with the Cohen’s kappa value. The kappa values between HC2 and GP-EIA, BSGP-EIA and pU 1 M-L/2R were 0.71 (CI 95% 0.63–0.78), 0.78 (CI 95% 0.71–0.84) and 0.63 (CI 95% 0.55–0.72), respectively. However, when the results from both BSGP-EIA and pU 1 M-L/2R were combined, the level of agreement with HC2 was increased to 0.82 (CI 95% 0.76–0.88), reflecting a very good agreement between the two HR-HPV detection strategies. Furthermore, the sensitivity of both techniques combined was also increased compared to the BSGP-EIA (88.7% vs 77.4%) and the pU (88.7 vs 60.9%) without penalizing the specificity obtained with the BSGP-EIA (95.1% vs 96.9%) and the pU (95.1% vs 96.5%). Conclusions This novel strategy, combining two PCR-based techniques for HR-HPV detection, could be useful for cervical cancer screening in self-collected samples in low-income countries.


2015 ◽  
Vol 5 (3) ◽  
pp. 511-515
Author(s):  
Edwin Van Teijlingen ◽  
Padam Simkhada

On too many occasions researchers conduct public health and/or epidemiological studies in low-income countries without the appropriate in-country ethical approval.  This article reflects on some of the underlying reasons for not applying for ethical approval.  The piece concludes that we need to start by educating our (junior) researchers and research students about the importance of research ethics.  We conclude with a number of recommendations for researchers, scientific journal editors and reviewers and ethical committees in high-income countries to bring the message home to researchers that ethical approval should be sought in low-income countries if and when required!


Sign in / Sign up

Export Citation Format

Share Document