Functional Texture Design and Texturing Processes

2016 ◽  
Vol 10 (1) ◽  
pp. 4-15 ◽  
Author(s):  
Nobuyuki Moronuki ◽  
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Cross Sectional ◽  
Nano Structure ◽  
Wide Range ◽  
The Hierarchical Structure ◽  
Cross Sectional Profile ◽  
Sectional Profile ◽  
Texture Design ◽  
Regular Patterns

Various functions can be obtained by applying regular patterns or textures to surfaces. Depending on the function, the required dimensions of the texture, such as the pitch, vary over a wide range: from nanometers for optical function to millimeters for friction. In addition, the high aspect ratio of the cross sectional profile or the hierarchical structure of a micro- or nano-structure is required to control the wettability, for example. This paper reviews various texturing processes as well as the functionalities thus attained and their application.

scholarly journals Disentangling the Main Components of Hydromorphological Modifications at Reach Scale in Rivers of Greece

Hydrology ◽  
2020 ◽  
Vol 7 (2) ◽  
pp. 22
Author(s):  
Konstantinos Stefanidis ◽  
Anna Latsiou ◽  
Theodora Kouvarda ◽  
Anastasia Lampou ◽  
Nektarios Kalaitzakis ◽  
...  
Keyword(s):  
Habitat Modification ◽  
Ecological Quality ◽  
Cross Sectional ◽  
Habitat Features ◽  
Wide Range ◽  
Cross Sectional Profile ◽  
Sectional Profile ◽  
Main Components ◽  
The Individual ◽  
River Habitat Survey

The Water Framework Directive (WFD) requires from member states to monitor hydromorphological features of rivers in order to assess their ecological quality. Thus, numerous hydromorphological assessment methods have been developed with most of them focusing on the dynamics of hydrology, geomorphology and riparian zone extent. Within the scope of this study, we assessed the hydromorphological features of 106 river reaches distributed among thirteen WFD River Basin Districts (RBDs) to identify the main drivers of hydromorphological perturbation at a national scale. The studied reaches reflect a wide range of natural variability as they include various types of watercourses extending from lowlands to mid-altitude and mountainous systems. We employed the River Habitat Survey (RHS), and we recorded hydromorphological features and modifications in both banks and the channel bed along 500 m for each reach. Then, the Habitat Modification Score (HMS) and the individual sub-scores that indicate the extent of specific modifications (e.g., bridges, fords, weirs, bank reprofiling, bank reinforcement, etc.) were calculated in order to a) assess the severity of the total artificial modification and b) to highlight the most common and severe causes of overall alteration. The results showed that alterations such as reprofiling and reinforcement of banks contributed the most to the total HMS followed by the presence of fords and bridges. Particularly, the bank alterations indicate a serious deterioration of the longitudinal profile of the reaches, while the occurrence of many fords and bridges is the main cause for perturbations that affect locally the stream cross-sectional profile. Overall, these results compile a first nationwide assessment of the hydromorphological status of Greek rivers in line with the WFD and set the basis for further research that will focus on the diversity of stream habitat features as a measure for the overall ecological quality.

Nanometer-Scale Dimensional Metrology With the Nist Calibrated Atomic Force Microscope

1999 ◽  
Vol 5 (S2) ◽  
pp. 958-959
Author(s):  
R. Dixson ◽  
R. Köning ◽  
V. W. Tsai ◽  
J. Fu ◽  
T. V. Vorburger
Keyword(s):  
Three Dimensional ◽  
Critical Dimension ◽  
Dimensional Metrology ◽  
Cross Sectional ◽  
Atomic Force ◽  
Reflected Light ◽  
Wide Range ◽  
Cross Sectional Profile ◽  
Sectional Profile ◽  
Depth Feature

Atomic force microscopes (AFMs), which generate three dimensional images with nanometer level resolution, are increasingly being used as tools for sub-micrometer dimensional metrology in a wide range of applications. Measurements commonly performed with AFMs are feature spacing (pitch), feature height (or depth), feature width (critical dimension), and surface roughness. To perform accurate measurements, the scales of an AFM must be calibrated regularly. Presently available standards for this purpose are calibrated using stylus instruments and optical techniques. The effectiveness of this approach, however, is limited by the differences in the working ranges of the various techniques and by questions of methods divergence. Such divergence may occur between measurements made by instruments using different techniques to measure the same feature. A reflected light microscope and an AFM, for example, may have differing sensitivity to the cross-sectional profile of measured lines. For sufficiently steep lines, an AFM tip will only contact the features near the tops.

X-Ray Replication of Submicrometer Linewidth Patterns

1977 ◽  
Vol 35 ◽  
pp. 136-137
Author(s):  
Henry I. Smith ◽  
D.C. Flanders
Keyword(s):  
Electron Beam Lithography ◽  
Cross Sectional ◽  
X Ray ◽  
Electron Backscattering ◽  
Spatial Frequencies ◽  
Cross Sectional Profile ◽  
Carbon Foils ◽  
Sectional Profile ◽  
And Control ◽  
Soft Radiation

Scanning electron beam lithography has been used for a number of years to write submicrometer linewidth patterns in radiation sensitive films (resist films) on substrates. On semi-infinite substrates, electron backscattering severely limits the exposure latitude and control of cross-sectional profile for patterns having fundamental spatial frequencies below about 4000 Å(l),Recently, STEM'S have been used to write patterns with linewidths below 100 Å. To avoid the detrimental effects of electron backscattering however, the substrates had to be carbon foils about 100 Å thick (2,3). X-ray lithography using the very soft radiation in the range 10 - 50 Å avoids the problem of backscattering and thus permits one to replicate on semi-infinite substrates patterns with linewidths of the order of 1000 Å and less, and in addition provides means for controlling cross-sectional profiles. X-radiation in the range 4-10 Å on the other hand is appropriate for replicating patterns in the linewidth range above about 3000 Å, and thus is most appropriate for microelectronic applications (4 - 6).

scholarly journals High-resolution particle separation by inertial focusing in high aspect ratio curved microfluidics

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Javier Cruz ◽  
Klas Hjort
Keyword(s):  
High Resolution ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Biological Fluids ◽  
Essential Feature ◽  
Particle Separation ◽  
Size Difference ◽  
Inertial Focusing ◽  
Complex Samples ◽  
Wide Range

AbstractThe ability to focus, separate and concentrate specific targets in a fluid is essential for the analysis of complex samples such as biological fluids, where a myriad of different particles may be present. Inertial focusing is a very promising technology for such tasks, and specially a recently presented variant, inertial focusing in High Aspect Ratio Curved systems (HARC systems), where the systems are easily engineered and focus the targets together in a stable position over a wide range of particle sizes and flow rates. However, although convenient for laser interrogation and concentration, by focusing all particles together, HARC systems lose an essential feature of inertial focusing: the possibility of particle separation by size. Within this work, we report that HARC systems not only do have the capacity to separate particles but can do so with extremely high resolution, which we demonstrate for particles with a size difference down to 80 nm. In addition to the concept for particle separation, a model considering the main flow, the secondary flow and a simplified expression for the lift force in HARC microchannels was developed and proven accurate for the prediction of the performance of the systems. The concept was also demonstrated experimentally with three different sub-micron particles (0.79, 0.92 and 1.0 µm in diameter) in silicon-glass microchannels, where the resolution in the separation could be modulated by the radius of the channel. With the capacity to focus sub-micron particles and to separate them with high resolution, we believe that inertial focusing in HARC systems is a technology with the potential to facilitate the analysis of complex fluid samples containing bioparticles like bacteria, viruses or eukaryotic organelles.

scholarly journals Bonding widths of Deposited Polymer Strands in Additive Manufacturing

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 871
Author(s):  
Cheng Luo ◽  
Manjarik Mrinal ◽  
Xiang Wang ◽  
Ye Hong
Keyword(s):  
Polymer Melt ◽  
Acrylonitrile Butadiene Styrene ◽  
High Viscosity ◽  
Numerical Results ◽  
Fused Filament Fabrication ◽  
Cross Sectional ◽  
Nozzle Height ◽  
Special Cases ◽  
Cross Sectional Profile ◽  
Sectional Profile

In this study, we explore the deformation of a polymer extrudate upon the deposition on a build platform, to determine the bonding widths between stacked strands in fused-filament fabrication. The considered polymer melt has an extremely high viscosity, which dominates in its deformation. Mainly considering the viscous effect, we derive analytical expressions of the flat width, compressed depth, bonding width and cross-sectional profile of the filament in four special cases, which have different combinations of extrusion speed, print speed and nozzle height. We further validate the derived relations, using our experimental results on acrylonitrile butadiene styrene (ABS), as well as existing experimental and numerical results on ABS and polylactic acid (PLA). Compared with existing theoretical and numerical results, our derived analytic relations are simple, which need less calculations. They can be used to quickly predict the geometries of the deposited strands, including the bonding widths.

scholarly journals Strength Analysis of Alternative Airframe Layouts of Regional Aircraft on the Basis of Automated Parametrical Models

Aerospace ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 80
Author(s):  
Dmitry V. Vedernikov ◽  
Alexander N. Shanygin ◽  
Yury S. Mirgorodsky ◽  
Mikhail D. Levchenkov
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
High Performance ◽  
Strength Analysis ◽  
Labor Input ◽  
Aerodynamic Loading ◽  
Aspect Ratios ◽  
Wide Range ◽  
Parametrical Design

This publication presents the results of complex parametrical strength investigations of typical wings for regional aircrafts obtained by means of the new version of the four-level algorithm (FLA) with the modified module responsible for the analysis of aerodynamic loading. This version of FLA, as well as a base one, is focused on significant decreasing time and labor input of a complex strength analysis of airframes by using simultaneously different principles of decomposition. The base version includes four-level decomposition of airframe and decomposition of strength tasks. The new one realizes additional decomposition of alternative variants of load cases during the process of determination of critical load cases. Such an algorithm is very suitable for strength analysis and designing airframes of regional aircrafts having a wide range of aerodynamic concepts. Results of validation of the new version of FLA for a high-aspect-ratio wing obtained in this work confirmed high performance of the algorithm in decreasing time and labor input of strength analysis of airframes at the preliminary stages of designing. During parametrical design investigation, some interesting results for strut-braced wings having high aspect ratios were obtained.

scholarly journals Self-ordered nanospike porous alumina fabricated under a new regime by an anodizing process in alkaline media

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mana Iwai ◽  
Tatsuya Kikuchi ◽  
Ryosuke O. Suzuki
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Porous Alumina ◽  
Three Dimensional ◽  
Alkaline Media ◽  
Alkaline Electrolyte ◽  
Subsequent Formation ◽  
Interpore Distance ◽  
Wide Range ◽  
Ordered Porous

AbstractHigh-aspect ratio ordered nanomaterial arrays exhibit several unique physicochemical and optical properties. Porous anodic aluminum oxide (AAO) is one of the most typical ordered porous structures and can be easily fabricated by applying an electrochemical anodizing process to Al. However, the dimensional and structural controllability of conventional porous AAOs is limited to a narrow range because there are only a few electrolytes that work in this process. Here, we provide a novel anodizing method using an alkaline electrolyte, sodium tetraborate (Na2B4O7), for the fabrication of a high-aspect ratio, self-ordered nanospike porous AAO structure. This self-ordered porous AAO structure possesses a wide range of the interpore distance under a new anodizing regime, and highly ordered porous AAO structures can be fabricated using pre-nanotexturing of Al. The vertical pore walls of porous AAOs have unique nanospikes measuring several tens of nanometers in periodicity, and we demonstrate that AAO can be used as a template for the fabrication of nanomaterials with a large surface area. We also reveal that stable anodizing without the occurrence of oxide burning and the subsequent formation of uniform self-ordered AAO structures can be achieved on complicated three-dimensional substrates.

Measurement of cross-sectional profile for sub-15nm hp LS patterns in nanoimprint templates using small-angle x-ray scattering

2020 ◽  
Author(s):  
Kazuki Hagihara ◽  
Eiji Yamanaka ◽  
Yoshiyasu Ito ◽  
Kiyoshi Ogata ◽  
Kazuhiko Omote ◽  
...  
Keyword(s):  
Small Angle ◽  
Cross Sectional ◽  
X Ray ◽  
X Ray Scattering ◽  
Cross Sectional Profile ◽  
Sectional Profile ◽  
Ray Scattering

Torsional Stiffness of a Thin-Walled Beam Braced by Pinned or Rigidly Fixed Transverse Diaphragms

1973 ◽  
Vol 15 (5) ◽  
pp. 351-356
Author(s):  
T. Harrison ◽  
J. M. Siddall
Keyword(s):  
Experimental Evidence ◽  
Theoretical Work ◽  
Torsional Stiffness ◽  
Cross Sectional ◽  
Cross Sectional Profile ◽  
Thin Walled ◽  
Sectional Profile ◽  
Good Agreement

The torsional stiffness of a thin-walled beam of open cross-sectional profile braced by evenly spaced transverse diaphragms is studied. Diaphragms rigidly fixed or attached by frictionless pins are treated and it is seen that, in either case, the only effect is to modify the St Venant torsional constant for the thin-walled beam. The theoretical work is supported by experimental evidence from two braced perspex channels which simulate the two assumed methods of attaching the diaphragms. Good agreement is demonstrated.

scholarly journals Influence of Geometric Parameters on Aerodynamic and Acoustic Performances of Bladeless Fans

2019 ◽  
Author(s):  
Ang Li ◽  
Jun Chen ◽  
Yangfan Liu ◽  
Stuart Bolton ◽  
Patricia Davies
Keyword(s):  
Cross Section ◽  
Fluid Dynamic ◽  
Geometric Parameters ◽  
Design Stage ◽  
Air Velocity ◽  
Cross Sectional ◽  
Future Design ◽  
Cross Sectional Profile ◽  
The Cross ◽  
Sectional Profile

Abstract In recent years, the bladeless fan that does not have visible impellers have been widely applied in household appliances. Since the customers are particularly sensitive to noise and the strength of wind generated by the fan, the aerodynamic and acoustic performances of the fan need to be accurately characterized in the design stage. In this study, computational fluid dynamic (CFD) and computational aeroacoustics (CAA) are applied to investigate the performances of different designs of a bladeless fan model. The influence of four parameters, namely the airfoil selection for cross-section of the wind channel, the slit width, the height of cross-section and the location of the slit, is investigated. The results indicate the streamwise air velocity increases significantly by narrowing the outlet, but the noise level increases simultaneously. In addition, the generated noise increases while the height of fan cross-section increases, and a 4mm height of the cross section is optimal for aerodynamic performance. When the slit is closer to the location of maximum thickness, the performances of the bladeless fan increases. Moreover, the performance is not changed significantly by changing the cross-sectional profile. Finally, the optimal geometric parameters are identified to guide the future design of the bladeless fan.

Sign in / Sign up

Export Citation Format

Share Document