scholarly journals An Efficient and Sustainable Approach to Prepare Carboxylated Cellulose Nanocrystals for Rubber Reinforcement Featuring Dual Crosslinking Networks

2021 ◽  
Author(s):  
Jie Hu ◽  
Zhengqing Kong ◽  
Ke Liu ◽  
Jinli Qin ◽  
Yuhong Tao ◽  
...  
Keyword(s):  
Cellulose Nanocrystals ◽  
High Performance ◽  
Chemical Reactivity ◽  
Epoxy Group ◽  
Crosslinking Agent ◽  
Covalent Bond ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Carboxyl Groups ◽  
Butadiene Rubber

Abstract The surface functionalization of CNCs and the construction of strong interfacial adhesion between CNCs and rubber matrix are effective way to achieve high performance rubber/CNCs nanocomposites. Herein, carboxylation of sulphated cellulose nanocrystals (CNC-OSO3H) was conducted in aqueous medium by using citric acid as modifier. Large amount of carboxyl groups was successfully grafted on the surface of CNC-OSO3H, which endows the carboxylated CNC-OSO3H (abbreviate as CNC-CA) with higher chemical reactivity and thermal stability. Subsequently, carboxylated styrene butadiene rubber (XSBR)/CNC-CA nanocomposites with dual crosslinking design were prepared by using polyethylene glycol diglycidyl ether (PEGDE) as the crosslinking agent and CNC-CA as the reinforcing fillers. FTIR investigation found that in the obtained nanocomposites, the carboxyl groups on CNC-CA and XSBR formed hydrogen bonds (physical crosslinking) with each other, and the carboxyl groups formed covalent bond with the epoxy group on PEGDE simultaneously. The coexistence of physical and chemical crosslinking improved the interface compatibility between CNC-CA and XSBR matrix, accelerated the homogenous dispersion of CNC-CA and realized the crosslinking of the matrix itself. As expected, XSBR/CNC-CA nanocomposites with dual crosslinking network showed remarkable enhancement in tensile strength (up to 500%), modulus (up to 151%), work of fracture (up to 348%). This work provides both a facile and green approach to obtain carboxylated CNCs and a convenient method for the preparation of high-performance rubber nanocomposites with multiple interactions.

scholarly journals Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1085
Author(s):  
Patricia Castaño-Rivera ◽  
Isabel Calle-Holguín ◽  
Johanna Castaño ◽  
Gustavo Cabrera-Barjas ◽  
Karen Galvez-Garrido ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
High Performance ◽  
Rubber Matrix ◽  
Butadiene Rubber ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rubber Blends ◽  
Ft Ir ◽  
Chloroprene Rubber

Organoclay nanoparticles (Cloisite® C10A, Cloisite® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physical mechanical properties of nanocomposites was determined and correlated with its structure, compatibility and cure properties using Fourier Transformed Infrared (FT-IR), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and rheometric analysis. Physical mechanical properties were improved by organoclays at 5–7 phr. Nanocomposites with organoclays exhibited a remarkable increase up to 46% in abrasion resistance. The improvement in properties was attributed to good organoclay dispersion in the rubber matrix and to the compatibility between them and the chloroprene rubber. Carbon black at a 40 phr load was not the optimal concentration to interact with organoclays. The present study confirmed that organoclays can be a reinforcing filler for high performance applications in rubber nanocomposites.

Highly epoxidized soybean oil in replacement of mineral oil for high performance on silica-filled tread rubber compounds

2021 ◽  
pp. 009524432110290
Author(s):  
Leandro Hernán Esposito ◽  
Angel José Marzocca
Keyword(s):  
Soybean Oil ◽  
High Performance ◽  
Rolling Resistance ◽  
Wear Test ◽  
Mineral Oil ◽  
Epoxidized Soybean Oil ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Compound ◽  
The Impact

The potential replacement of a treated residual aromatic extract mineral oil (TRAE) by a highly epoxidized soybean oil (ESO) into a silica-filled styrene-butadiene rubber compound was investigated. In order to determine if ESO compounds performance are suitable for tread tire applications, processing properties cure and characteristics were evaluated. The impact of ESO amount on the silica dispersion was confirmed by Payne Effect. The presence of chemical or physical interactions between ESO and silica improves the filler dispersion, enabling the compound processability and affecting the cure kinetic rate. An adjusted rubber compound with 2 phr of ESO and 2 phr of sulfur presented the higher stiffness and strength values with lower weight loss from a wear test compared with TRAE compound at an equal amount of oil and curing package. Furthermore, wet grip and rolling resistance predictors of both compounds gave comparable results, maintaining a better performance and reducing the dependence of mineral oil for tire tread compounds.

scholarly journals Hybrid Silica-Based Fillers in Nanocomposites: Influence of Isotropic/Isotropic and Isotropic/Anisotropic Fillers on Mechanical Properties of Styrene-Butadiene (SBR)-Based Rubber

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2413
Author(s):  
Mariapaola Staropoli ◽  
Vincent Rogé ◽  
Enzo Moretto ◽  
Joffrey Didierjean ◽  
Marc Michel ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silica Nanoparticles ◽  
Synergetic Effect ◽  
Mechanical Analysis ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Precipitated Silica ◽  
Scanning Transmission ◽  
Styrene Butadiene

The improvement of mechanical properties of polymer-based nanocomposites is usually obtained through a strong polymer–silica interaction. Most often, precipitated silica nanoparticles are used as filler. In this work, we study the synergetic effect occurring between dual silica-based fillers in a styrene-butadiene rubber (SBR)/polybutadiene (PBD) rubber matrix. Precipitated Highly Dispersed Silica (HDS) nanoparticles (10 nm) have been associated with spherical Stöber silica nanoparticles (250 nm) and anisotropic nano-Sepiolite. By imaging filler at nano scale through Scanning Transmission Electron Microscopy, we have shown that anisotropic fillers align only in presence of a critical amount of HDS. The dynamic mechanical analysis of rubber compounds confirms that this alignment leads to a stiffer nanocomposite when compared to Sepiolite alone. On the contrary, spherical 250 nm nanoparticles inhibit percolation network and reduce the nanocomposite stiffness.

Particle Size, Structure and Powdering Process of Calcium Carbonate Nanoparticles Filled Powdered Styrene-Butadiene Rubber

2011 ◽  
Vol 415-417 ◽  
pp. 237-242
Author(s):  
Zhou Da Zhang ◽  
Xue Mei Chen ◽  
Guo Liang Qu
Keyword(s):  
Particle Size ◽  
Calcium Carbonate ◽  
Size Structure ◽  
Average Diameter ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Particle Structure ◽  
Styrene Butadiene ◽  
New Particles

Calcium carbonate nanoparticles (nano-CaCO3) filled powdered styrene-butadiene rubber (P(SBR/CaCO3) was prepared by adding nano-CaCO3 particles, encapsulant and coagulant to styrene-butadiene rubber (SBR) latex by coacervation, and the particle size distribution, structure were studied. Scanning electron microscopy (SEM) was used to investigate the (P(SBR/CaCO3) particle structure, and a powdering model was proposed to describe the powdering process. The process includes: (i) the latex particles associated with the dispersed nano-CaCO3 particles (adsorption process) to form “new particles” and (ii) the formation of P(SBR/CaCO3) by coagulating “new particles”. The SEM results also shown that the nano-CaCO3 and rubber matrix have formed a macroscopic homogenization in the (P(SBR/CaCO3) particles and nano-CaCO3 dispersed uniformly in the rubber matrix with an average diameter of approximately 50 nm.

scholarly journals Influence of Eco-Friendly Processing Aids on Silica-Based Rubber Composites

2020 ◽  
Vol 10 (20) ◽  
pp. 7244
Author(s):  
Sung Ho Song
Keyword(s):  
Mechanical Properties ◽  
Rolling Resistance ◽  
Fatigue Properties ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Dispersing Agent ◽  
Styrene Butadiene ◽  
Processing Aids

As eco-friendly “green tires” are being developed in the tire industry, conventionally used carbon black is being replaced with silica in rubber compounds. Generally, as a lubricant and dispersing agent, processing aids containing zinc ions have been employed as additives. However, as zinc is a heavy metal, alternative eco-friendly processing aids are required to satisfy worldwide environmental concerns. Furthermore, non-toxic, degradable, and renewable processing aids are required to improve the mechanical properties of the rubber composites. In this study, we evaluated the effects of diverse silica-based processing aids containing hydrocarbon, benzene, and hydroxyl functional groups on the mechanical properties of rubber composites. Among them, rubber composites that used amphiphilic terpene phenol resin (TPR) with hydrophilic silica showed compatibility with the hydrophobic rubber matrix and were revealed to improve the mechanical and fatigue properties. Furthermore, owing to the enhanced dispersion of silica in the rubber matrix, the TPR/styrene butadiene rubber composites exhibited enhanced wet grip and rolling resistance. These results indicated that TPR had multifunctional effects at low levels and has the potential for use as a processing aid in silica-based rubber composites in tire engineering applications.

scholarly journals Hybrid Interface in Sepiolite Rubber Nanocomposites: Role of Self-Assembled Nanostructure in Controlling Dissipative Phenomena

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 486 ◽  
Author(s):  
Elkid Cobani ◽  
Irene Tagliaro ◽  
Marco Geppi ◽  
Luca Giannini ◽  
Philippe Leclère ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Nuclear Magnetic Resonance Analysis ◽  
Butadiene Rubber ◽  
Resonance Analysis ◽  
Self Assembled ◽  
Styrene Butadiene ◽  
The Impact

Sepiolite (Sep)–styrene butadiene rubber (SBR) nanocomposites were prepared by using nano-sized sepiolite (NS-SepS9) fibers, obtained by applying a controlled surface acid treatment, also in the presence of a silane coupling agent (NS-SilSepS9). Sep/SBR nanocomposites were used as a model to study the influence of the modified sepiolite filler on the formation of immobilized rubber at the clay-rubber interface and the role of a self-assembled nanostructure in tuning the mechanical properties. A detailed investigation at the macro and nanoscale of such self-assembled structures was performed in terms of the organization and networking of Sep fibers in the rubber matrix, the nature of both the filler–filler and filler–rubber interactions, and the impact of these features on the reduced dissipative phenomena. An integrated multi-technique approach, based on dynamic measurements, nuclear magnetic resonance analysis, and morphological investigation, assessed that the macroscopic mechanical properties of clay nanocomposites can be remarkably enhanced by self-assembled filler structures, whose formation can be favored by manipulating the chemistry at the hybrid interfaces between the clay particles and the polymers.

Sign in / Sign up

Export Citation Format

Share Document