scholarly journals Band Gap Analysis of Ca3MgSi2O8:Dy3+ Nanorod Arrays By A Solid State Reaction Method

2021 ◽  
Author(s):  
Pradeep Dewangan ◽  
D. P. Bisen ◽  
Nameeta Brahme ◽  
Shweta Sharma ◽  
Raunak Kumar Tamrakar ◽  
...  
Keyword(s):  
Solid State ◽  
Band Gap ◽  
Crystal Size ◽  
Gap Analysis ◽  
Solid State Reaction Method ◽  
Nanorod Arrays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tauc Plot ◽  
Transmission Electron

Abstract Present study throuws light on solid state synthesis, phase and band properties of a Dy3+ doped Ca3MgSi2O8. Crystal phase of the phosphor was characterized by X-ray diffraction (XRD) and surface morphology was crystal size was determined by using scanning elelctron microscopy (SEM), and transmission electron microscopy (TEM) respectively. To detemine the band gap behaviour of the crystal absorption spectra was used, which was further analyzed by using Tauc plot. The band gap is calculated ≈4.5eV, which decreases on increasing doping concentration of Dy3+.

Structural changes in titanium dioxide nanocrystals during plastic deformation

2005 ◽  
Vol 38 (5) ◽  
pp. 749-756 ◽  
Author(s):  
Ulrich Gesenhues
Keyword(s):  
Structural Changes ◽  
Crystal Size ◽  
Lower Layer ◽  
High Energy ◽  
Primary Crystal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hall Method ◽  
Means Of Transmission

The polygonization of 200 nm rutile crystals during dry ball-milling at 10gwas monitored in detail by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD). The TEM results showed how to modify the Williamson–Hall method for a successful evaluation of crystal size and microstrain from XRD profiles. Macrostrain development was determined from the minute shift of the most intense reflection. In addition, changes in pycnometrical density were monitored. Accordingly, the primary crystal is disintegrated during milling into a mosaic of 12–35 nm pieces where the grain boundaries induce up to 1.2% microstrain in a lower layer of 6 nm thickness. Macrostrain in the interior of the crystals rises to 0.03%. The pycnometrical density, reflecting the packing density of atoms in the grain boundary, decreases steadily by 1.1%. The results bear relevance to our understanding of plastic flow and the mechanism of phase transitions of metal oxides during high-energy milling.

scholarly journals Structure and electric properties of cerium substituted SrBi1.8Ce0.2Nb2O9 and SrBi1.8Ce0.2Ta2O9 ceramics

2016 ◽  
Vol 10 (3) ◽  
pp. 183-188 ◽  
Author(s):  
Mohamed Afqir ◽  
Amina Tachafine ◽  
Didier Fasquelle ◽  
Mohamed Elaatmani ◽  
Jean-Claude Carru ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Solid State ◽  
Room Temperature ◽  
Single Phase ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Lcr Meter ◽  
Curie Temperature Tc

SrBi1.8Ce0.2Nb2O9 (SBCN) and SrBi1.8Ce0.2Ta2O9 (SBCT) powders were prepared via solid-state reaction method. X-ray diffraction analysis reveals that the SBCN and SBCT powders have the single phase orthorhom-bic Aurivillius structure at room temperature. The contribution of Raman scattering and FTIR spectroscopy of these samples were relatively smooth and resemble each other. The calcined powders were uniaxially pressed and sintered at 1250?C for 8 h to obtaine dense ceramics. Dielectric constant, loss tangent and AC conductivity of the sintered Ce-doped SrBi2Nb2O9 and SrBi2Ta2O9 ceramics were measured by LCR meter. The Ce-doped SBN (SBCN) ceramics have a higher Curie temperature (TC) and dielectric constant at TC (380?C and ?? ~3510) compared to the Ce-doped SBT (SBCT) ceramics (330?C and ?? ~115) when measured at 100Hz. However, the Ce-doped SBT (SBCT) ceramics have lower conductivity and dielectric loss.

scholarly journals Making and Characterization of Limnpo4 Using Solid State Reaction Method for Lithium Ion Battery Cathodes

2019 ◽  
pp. 583-588
Author(s):  
Adelyna Oktavia ◽  
Kurnia Sembiring ◽  
Slamet Priyono
Keyword(s):  
Solid State ◽  
Lithium Ion Battery ◽  
Lithium Ion ◽  
Solid State Reaction Method ◽  
Raw Material ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
X Ray ◽  
General Investigation

Hospho-material of olivine, LiMnPO4 identified as promising for cathode material generation next Lithium-ion battery and has been successfully synthesized by solid-state method with Li2Co3, 2MnO2, 2NH4H2PO4 as raw material. The influence of initial concentration of precursors at kalsinasi temperatures (400-800 ° C) flows with nitrogen. The purity and composition phase verified by x-ray diffraction analysis (XRD), scanning electron microscopy (SEM), spectroscopy, energy Dispersive x-ray Analysis (EDS), Raman spectra. General investigation shows that there is a correlation between the concentration of precursors, the temperature and the temperature of sintering kalsinasi that can be exploited to design lithium-ion next generation.

Thermal enhancement of 2H11/2→4I15/2 up-conversion luminescence of Er3+ doped K2Yb(PO4)(MoO4) phosphors

2021 ◽  
Author(s):  
Hongqiang Cui ◽  
Yongze Cao ◽  
Lei Zhang ◽  
Yuhang Zhang ◽  
Siying Ran ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Solid State Reaction ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Orthorhombic Crystal ◽  
Orthorhombic Crystal Structure ◽  
Reaction Method ◽  
X Ray ◽  
Thermal Enhancement

Er3+ with different concentrations doped K2Yb(PO4)(MoO4) phosphors were prepared by a solid-state reaction method, and the layered orthorhombic crystal structure of the samples was confirmed by X-ray diffraction (XRD). Under...

Changes in Crystallite Size of Tricalcium Silicate during the Laboratory Grinding

2021 ◽  
Vol 321 ◽  
pp. 23-27
Author(s):  
Simona Ravaszová ◽  
Karel Dvořák
Keyword(s):  
Solid State ◽  
Crystallite Size ◽  
Solid State Reaction ◽  
Solid State Reaction Method ◽  
Tricalcium Silicate ◽  
Planetary Mill ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Grinding Time

The paper is focused on one of the most important component of Portland clinker-on the tricalcium silicate. The study reported in this article is focuses on the changes in crystallite size of synthetic tricalcium silicate obtained using solid state reaction method. Crystallite size changes are monitored during the grinding in three types of laboratory mills in two different conditions. Changing in crystallite size at various grinding time up to 120 minutes are studied with the aid of X-ray diffraction and using the Scherrer equation. It has been found that the most efficient laboratory mill in terms of speed and fineness of the material was the planetary mill.

scholarly journals Enhanced Photocatalytic Activity of Vanadium-Doped SnO2 Nanoparticles in Rhodamine B Degradation

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
H. Letifi ◽  
Y. Litaiem ◽  
D. Dridi ◽  
S. Ammar ◽  
R. Chtourou
Keyword(s):  
Photocatalytic Activity ◽  
Rhodamine B ◽  
Crystal Size ◽  
Sno2 Nanoparticles ◽  
X Ray Diffraction ◽  
Optical Studies ◽  
Vanadium Concentration ◽  
X Ray ◽  
Transmission Electron ◽  
20 Nm

In this paper, we have reported a novel photocatalytic study of vanadium-doped SnO2 nanoparticles (SnO2: V NPs) in rhodamine B degradation. These NPs have been prepared with vanadium concentrations varying from 0% to 4% via the coprecipitation method. Structural, morphological, and optical properties of the prepared nanoparticles have been investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscope (TEM), and UV-Vis and photoluminescence (PL) spectroscopy. Structural properties showed that both undoped and SnO2: V NPs exhibited the tetragonal structure, and the average crystal size has been decreased from 20 nm to 10 nm with the increasing doping level of vanadium. Optical studies showed that the absorption edge of SnO2: V NPs showed a redshift with the increasing vanadium concentration. This redshift leads to the decrease in the optical band gap from 3.25 eV to 2.55 eV. A quenching in luminescence intensity has been observed in SnO2: V NPs, as compared to the undoped sample. Rhodamine B dye (RhB) has been used to study the photocatalytic degradation of all synthesized NPs. As compared to undoped SnO2 NPs, the photocatalytic activity of SnO2: V NPs has been improved. RhB dye was considerably degraded by 95% within 150 min over on the SnO2: V NPs.

Preparation of PVC/Kaolin Nanocomposites through Solid State Shear Compounding Based on Pan-Milling

2011 ◽  
Vol 694 ◽  
pp. 350-354 ◽  
Author(s):  
Kan She Li ◽  
Ying Hong Chen ◽  
Hong Mei Niu ◽  
Jian Jun Chen
Keyword(s):  
Electron Microscopy ◽  
Tensile Strength ◽  
Solid State ◽  
Impact Strength ◽  
Ambient Temperature ◽  
Mechanical Tests ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Filled Composite

Solid state shear compounding technology (S3C) based on pan-milling is an effective method to prepare polymer/layered mineral composites with nano intercalating structure. The PVC/Kaolin compounding powders were successfully prepared by pan-milling at ambient temperature, and then the PVC/Kaolin nanocomposites were processed by moulding The structure and properties of PVC/Kaolin compounding powder and nanocomposites were investigated by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and mechanical tests. The results showed that the mechanical properties of PVC/Kaolin nanocomposites prepared through S3C based on pan-milling 30 cycles at ambient temperature including elongation, tensile strength and notched impact strength were remarkably improved compared with conventional filled composites. The elongation of PVC / Kaolin nanocomposites with 4 %wt. Kaolin was 274.6%, which is 187.3 % higher than that for a conventional filled composite. The tensile strength was 54.0 MPa, which is 6.3 MPa higher than that for a conventional filled composite. The tensile strength of the nanocomposites with 8 %wt. Kaolin was 57.5 MPa, which is 9.1 MPa higher than that for a conventional filled composite. At the same time, the notched impact strength was 4.9 kJ/m2, which is 1.0 kJ/m2 higher than a conventional filled composite. Strengthening and toughening for PVC were synchronously realized. XRD, SEM and TEM verified that S3C based on pan-milling realized synchronously pulverizing, dispersion and compounding of PVC with kaolin Through 25-30 cycles pan-milling, PVC and Kaolin powders imbedded each other and made into uniform PVC/Kaolin compounding powders and nanocomposites. The strip flake of Kaolin particles with thickness less than 50 nanometer and the aspect ratio of 10 times dispersed homogeneously in the PVC matrix.

Superconducting Compound Hg0.8Sb0.2Ba2Ca2Cu3O8+δ Compared with Hg0.8Sb0.2Ba2Ca1Cu2O6+δ to Evaluate Transition Temperature

2020 ◽  
Vol 18 (11) ◽  
pp. 14-18
Author(s):  
Abbas K. Saadon ◽  
Kareem A. Jasim ◽  
Auday H. Shaban
Keyword(s):  
High Temperature ◽  
Transition Temperature ◽  
Solid State ◽  
Solid State Reaction ◽  
Hot Spot ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Superconducting Compound

The high temperature superconductor’s compounds are one of the hot spot field of science, due to their applications in industries. Hg0.8Sb0.2Ba2Ca2Cu3O8+δ and Hg0.8Sb0.2Ba2Ca1Cu2O6+δ, were manufactured using a doable-step of solid state reaction method. The samples were sintered at 800 ° C. The transition temperatures Tc are found from electrically resistively by using four probe techniques. The resistivity become zero when the transition temperature Tc(offset) have 131 and 119 K, and the onset temperature Tc(onset) have 139 K for Hg0.8Sb0.2Ba2Ca2Cu3O8+δ and 132 K for Hg0.8Sb0.2Ba2Ca1Cu2O6+δ. Analysis of X-ray diffraction showed a tetragonal structure with lattice parameters changes for all samples.

Mechanism of Achieving Nanocrystalline AIRu By Ball Milling

1988 ◽  
Vol 132 ◽  
Author(s):  
E. Hellstern ◽  
H. J. Fecht ◽  
C. Garland ◽  
W. L. Johnson ◽  
W. M. Keck
Keyword(s):  
Ball Milling ◽  
Crystal Size ◽  
Shear Bands ◽  
Nanocrystalline Structure ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Energy Ball ◽  
Small Grains

ABSTRACTWe investigated through X- ray diffraction and transmission electron microscopy the crystal refinement of the intermetallic compound AIRu by high- energy ball milling. The deformation process causes a decrease of crystal size to 5–7 rum and an increase of atomic level strain. This deformation is localized in shear bands with a thickness of 0.5 to 1 micron. Within these bands the crystal lattice breaks into small grains with a typical size of 8–14 rum. Further deformation leads to a final nanocrystalline structure with randomly oriented crystallite grains separated by high- angle grain boundaries.

Study on Band Gap Energy of F Doped TiO2 Nanotubes

2017 ◽  
Vol 889 ◽  
pp. 234-238
Author(s):  
Mohd Hasmizam Razali ◽  
Nur Arifah Ismail ◽  
Mahani Yusoff
Keyword(s):  
Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
Small Diameter ◽  
Ultra Violet ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Gap Energy ◽  
Transmission Electron ◽  
Xrd Patterns

Pure and F doped TiO2 nanotubes was synthesized using simple hydrothermal method. The hydrothermal was conducted using teflon-liner autoclave and maintained at 150oC for 24 hours. The characterization of synthesised product was carried out using x-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive of x-ray spectroscopy (EDX) and ultra violet – visible light diffuse reflectance spectroscopy (UV-Vis DRS) for band gap measurements. XRD patterns indicated that anatase TiO2 phase was remained after F doping suggested that fluorine was highly dispersed into TiO2 by substituted with O in the TiO2 lattice to formed TiO2-xFx solid solution. Morphology investigation using TEM found out small diameter of nanotubes structure within 8 – 10 nm of pure and F doped TiO2 nanotubes. The band gap energy (Eg) of both nanotubes samples were almost similar proposing that F doping does not modify the band gap energy.

Sign in / Sign up

Export Citation Format

Share Document