scholarly journals Process Optimization and Adsorptive Mechanism for Reactive Blue 19 Dye by Magnetic Crosslinked Chitosan/MgO/Fe3O4 Biocomposite

2021 ◽  
Author(s):  
Ali H. Jawad ◽  
Rangabhashiyam S ◽  
Ahmed Saud Abdulhameed ◽  
Syed Shatir A. Syed-Hassan ◽  
Zeid A. ALOthman ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Textile Dye ◽  
Adsorption Parameters ◽  
Solution Ph ◽  
Equilibrium Study ◽  
Reactive Blue 19 ◽  
Pseudo Second Order ◽  
Adsorptive Mechanism

Abstract A new biocomposite magnetic crosslinked glutaraldehyde-chitosan/MgO/Fe3O4 (CTS-GL/MgO/Fe3O4) adsorbent was prepared and applied for the removal of reactive blue 19 (RB 19) synthetic textile dye. The prepared CTS-GL/MgO/Fe3O4 was subjected to the several instrumental characterizations such as XRD, FTIR, SEM-EDX, pH-potentiometric titration, and pHpzc analyses. The influence of the input adsorption parameters such as A: CTS-GL/MgO/Fe3O4 dosage, B: initial solution pH, C: process temperature, and D: contact time on RB 19 removal efficiency was statistically optimized using Box-Behnken design (BBD). The analysis of variance (ANOVA) indicates the presence of five significant statistical interactions between input adsorption parameters i.e. (AB, AC, AD, BC, and BD). The adsorption kinetic and equilibrium study reveals a good to the pseudo-second-order model, and multilayer adsorption as proven by Freundlich isotherm model, respectively. The maximum adsorption capacity of CTS-GL/MgO/Fe3O4 towards RB19 was found to be 193.2 mg/g at 45 ºC. This work highlights the development of feasible and recoverable magnetic biocompsite adsorbent with desirable adsorption capacity towards textile dyes with good separation ability by using an external magnetic field.

Kinetics of lead ion biosorption from aqueous solution onto lyophilized Aspergillus niveus

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Hülya Karaca ◽  
Turgay Tay ◽  
Merih Kıvanç
Keyword(s):  
Adsorption Capacity ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Lead Ions ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Aspergillus Niveus ◽  
Pseudo Second Order

The biosorption of lead ions (Pb2+) onto lyophilized fungus Aspergillus niveus was investigated in aqueous solutions in a batch system with respect to pH, contact time and initial concentration of the ions at 30 °C. The maximum adsorption capacity of lyophilized A. niveus was found to be 92.6 mg g−1 at pH 5.1 and the biosorption equilibrium was established about in 30 min. The adsorption capacity obtained is one of the highest value among those reported in the literature. The kinetic data were analyzed using the pseudo-first-order kinetic, pseudo-second-order kinetic, and intraparticle diffusion equations. Kinetic parameters, such as rate constants, equilibrium adsorption capacities, and related correlation coefficients for the kinetic models were calculated and discussed. It was found that the adsorption of lead ions onto lyophilized A. niveus biomass fit the pseudo-second-order kinetic model well. The Langmuir and Freundlich isotherm parameters for the lead ion adsorption were applied and the Langmuir model agreed better with the adsorption of lead ions onto lyophilized A. niveus.

scholarly journals Dysprosium Removal from Water Using Active Carbons Obtained from Spent Coffee Ground

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1372 ◽  
Author(s):  
Lorena Alcaraz ◽  
María Esther Escudero ◽  
Francisco José Alguacil ◽  
Irene Llorente ◽  
Ana Urbieta ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Potassium Hydroxide ◽  
Activated Carbons ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Microporous Material ◽  
Spent Coffee Ground ◽  
Coffee Ground ◽  
Pseudo Second Order

This paper describes the physicochemical study of the adsorption of dysprosium (Dy3+) in aqueous solution onto two types of activated carbons synthesized from spent coffee ground. Potassium hydroxide (KOH)-activated carbon is a microporous material with a specific Brunauer–Emmett–Teller (BET) surface area of 2330 m2·g−1 and pores with a diameter of 3.2 nm. Carbon activated with water vapor and N2 is a solid mesoporous, with pores of 5.7 nm in diameter and a specific surface of 982 m2·g−1. A significant dependence of the adsorption capacity on the solution pH was found, but it does not significantly depend on the dysprosium concentration nor on the temperature. A maximum adsorption capacity of 31.26 mg·g−1 and 33.52 mg·g−1 for the chemically and physically activated carbons, respectively, were found. In both cases, the results obtained from adsorption isotherms and kinetic study were better a fit to the Langmuir model and pseudo-second-order kinetics. In addition, thermodynamic results indicate that dysprosium adsorption onto both activated carbons is an exothermic, spontaneous, and favorable process.

Equilibrium and Kinetics Studies for Adsorption of Cu(II) from Aqueous Solution by Modified Phosphogypusum

2012 ◽  
Vol 518-523 ◽  
pp. 369-375 ◽  
Author(s):  
Yue Hong Yang ◽  
Dun Tao Shu ◽  
Ting Dong Fu ◽  
Huai Yu Zhang
Keyword(s):  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Wet Process ◽  
Removal Capacity ◽  
Adsorbate Concentration ◽  
Equilibrium And Kinetics ◽  
Pseudo Second Order ◽  
Best Fit

The purpose of this study was to investigate the adsorption of Cu(II) on phosphogypsum, a waste material from the manufacture of phosphoric acid by wet process. The removal capacity of phosphogypsum for Cu(II) ions was studied as a function of solution pH, contact time, adsorbent dosage and adsorbate concentration. Before batch adsorption study, phosphogypsum was pre-conditioned by calcine without water. The Langmuir and Freundlich theories were used to describe the Cu(II) adsorption process, and the Freundlich isotherm showed the best fit to the process. The adsorptions of Cu(II) followed pseudo-second-order kinetics. Maximum adsorption capacity of lime-preconditioned phosphogypsum was found to be 2.824 mg/g. The results showed that the phoshogypsum is a suitable adsorbent for the removal of Cu(II) ions from aqueous solutions.

Adsorption of cadmium(II) from aqueous solution onto activated carbon

1997 ◽  
Vol 35 (7) ◽  
pp. 205-211 ◽  
Author(s):  
R. Leyva-Ramos ◽  
J. R. Rangel-Mendez ◽  
J. Mendoza-Barron ◽  
L. Fuentes-Rubio ◽  
R. M. Guerrero-Coronado
Keyword(s):  
Activated Carbon ◽  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Carbon Surface ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Ph Values ◽  
Average Percent Deviation ◽  
Initial Ph

The adsorption isotherm of cadmium on activated carbon was measured in a batch adsorber. Effects of temperature and solution pH on the adsorption isotherm were investigated by determining the adsorption isotherm at temperatures of 10, 25, and 40°C and at initial pH values from 2 to 8. Langmuir isotherm better fitted the experimental data since the average percent deviation was lower than with the Freundlich isotherm It was noticed that the amount of Cd2+ adsorbed was reduced about 3 times by increasing the temperature from 10 to 40°C. It was found that Cd2+ was not adsorbed on activated carbon at pH of 2 or lower and that Cd2+ was precipitated out as Cd(OH)2 at pH values above 9. Maximum adsorption capacity was observed at pH of 8 and the adsorption capacity was decreased about 12 times by reducing the initial pH from 8 to 3. According to the cadmium speciation diagram the predominant species below pH of 8 is Cd2+. Thus, cadmium was adsorbed on the activated carbon surface as Cd2+. It was concluded that the adsorption capacity is a strong function of pH and temperature.

scholarly journals Self-Regeneration Hybrid Hydrogel for Bisphenol A Adsorption in Water

2021 ◽  
Author(s):  
Mingyue Piao ◽  
Hongxue Du ◽  
Yuwei Sun ◽  
Honghui Teng
Keyword(s):  
Bisphenol A ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Significant Loss ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Hybrid Hydrogel ◽  
Polyethylene Glycol Diacrylate ◽  
Glycol Diacrylate ◽  
Pseudo Second Order

Abstract Hybrid hydrogel was synthesized by immobilizing TiO2 in polyethylene glycol diacrylate (TiO2@PEGDA) as an efficient adsorbent with photocatalysis property for bisphenol A (BPA) elimination. TiO2@PEGDA exhibited spherical and rough structure with limited crystallinity and abundant functional groups. The contact angle was 61.96°, indicating that TiO2@PEGDA is hydrophilic. The swelling capacity of TiO2@PEGDA (9.0%) was decreased compared with pristine PEGDA (15.6%). Adsorption results demonstrated that the maximum adsorption capacity of TiO2@PEGDA (101.4 mg/g) for BPA was slightly higher than pristine PEGDA (97.68 mg/g). The adsorption capacity was independent with pH at pH ＜ 8.0, and decreased obviously when the value of pH was higher than 8.0. The adsorption behavior was fitted well with the pseudo-second-order kinetic and the Freundlich isotherm model. Both ΔG0 and ΔH0 were negative, indicating that BPA adsorbed on TiO2@PEGDA was an exothermic and spontaneous process. Regeneration study was performed by photocatalysis, and the adsorption capacity was 85.6% compared with the initial capacity after four cycles of illumination, indicating that TiO2@PEGDA could be recycled without significant loss of adsorption capacity. Consequently, TiO2@PEGDA can serve as an eco-friendly and promising material for efficiently adsorbing BPA with self-clean property.

scholarly journals Development of Natural Cation Exchanger for the Treatment of Lead ions from Aqueous Solution

2013 ◽  
Vol 29 ◽  
pp. 34-43
Author(s):  
Puspa Lal Homagai
Keyword(s):  
Adsorption Capacity ◽  
Sugarcane Bagasse ◽  
Active Sites ◽  
Freundlich Isotherm ◽  
Saccharum Officinarum ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Fast Kinetics ◽  
Pseudo Second Order

Cellulose, hemicelluloses and lignin are the main constituents found in sugarcane (Saccharum officinarum) bagasse having many surface active sites containing hydroxyl and/or phenolic groups which are effective for chemical modification. The biowaste was first charred with concentrated sulphuric acid and then the charred aminated sugarcane bagasse (CASB) was prepared by reduction followed by oxidation. The developed bio-sorbent was characterized by SEM, TGA/DTA, FTIR and elemental analysis. Batch adsorption methods were carried out to determine Pb+2 sorption capacities at different pH ranges and sorbate concentrations. The maximum adsorption capacity for Pb+2 was found to be 323 mg g-1 with an efficiency of 98% at pH 4.The experimental data showed a good fit to Langmuir isotherm as compared to Freundlich isotherm models. The kinetics was best fitted with the pseudo-second order model. The adsorption equilibrium was attained within 20 min. The high adsorption capacity and fast kinetics results of the charred aminated sugarcane bagasse indicated that it might be potential adsorbent for the removal of lead from contaminated water. DOI: http://dx.doi.org/10.3126/jncs.v29i0.9235Journal of Nepal Chemical SocietyVol. 29, 2012Page: 34-43Uploaded date : 12/3/2013

scholarly journals Adsorption of Cu(II) by Poly-γ-glutamate/Apatite Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 962
Author(s):  
Kuo-Yu Chen ◽  
Wei-Yu Zeng
Keyword(s):  
Adsorption Capacity ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Initial Adsorption ◽  
Adsorption Equilibrium Data

Poly-γ-glutamate/apatite (PGA-AP) nanoparticles were prepared by chemical coprecipitation method in the presence of various concentrations of poly-γ-glutamate (γ-PGA). Powder X-ray diffraction pattern and energy-dispersive spectroscopy revealed that the main crystal phase of PGA-AP was hydroxyapatite. The immobilization of γ-PGA on PGA-AP was confirmed by Fourier transform infrared spectroscopy and the relative amount of γ-PGA incorporation into PGA-AP was determined by thermal gravimetric analysis. Dynamic light scattering measurements indicated that the particle size of PGA-AP nanoparticles increased remarkably with the decrease of γ-PGA content. The adsorption of aqueous Cu(II) onto the PGA-AP nanoparticles was investigated in batch experiments with varying contact time, solution pH and temperature. Results illustrated that the adsorption of Cu(II) was very rapid during the initial adsorption period. The adsorption capacity of PGA-AP nanoparticles for Cu(II) was increased with the increase in the γ-PGA content, solution pH and temperature. At a pH of 6 and 60 °C, a higher equilibrium adsorption capacity of about 74.80 mg/g was obtained. The kinetic studies indicated that Cu(II) adsorption onto PGA-AP nanoparticles obeyed well the pseudo-second order model. The Langmuir isotherm model was fitted well to the adsorption equilibrium data. The results indicated that the adsorption behavior of PGA-AP nanoparticles for Cu(II) was mainly a monolayer chemical adsorption process. The maximum adsorption capacity of PGA-AP nanoparticles was estimated to be 78.99 mg/g.

scholarly journals Corn stalk as starting material to prepare a novel adsorbent via SET-LRP and its adsorption performance for Pb(II) and Cu(II)

2020 ◽  
Vol 7 (3) ◽  
pp. 191811
Author(s):  
Yazhen Wang ◽  
Shuang Li ◽  
Liqun Ma ◽  
Shaobo Dong ◽  
Li Liu
Keyword(s):  
Adsorption Capacity ◽  
Potassium Hydroxide ◽  
Adsorption Process ◽  
Hydroxylamine Hydrochloride ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Corn Stalk ◽  
Order Model ◽  
Adsorption Performance ◽  
Pseudo Second Order

Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH 2 OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g –1 and 94.72 mg g −1 , and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.

scholarly journals Adsorptive removal of Ni2+ and Cd2+ from wastewater using a green longan hull adsorbent

2017 ◽  
Vol 36 (1-2) ◽  
pp. 762-773 ◽  
Author(s):  
Xingmei Guo ◽  
Sihan Tang ◽  
Yan Song ◽  
Junmin Nan
Keyword(s):  
Metal Ions ◽  
Adsorption Capacity ◽  
Adsorption Mechanism ◽  
Maximum Adsorption Capacity ◽  
Adsorptive Removal ◽  
Langmuir Adsorption ◽  
Monolayer Adsorption ◽  
Pseudo Second Order ◽  
Adsorptive Mechanism ◽  
Optimized Conditions

The adsorptive removal of Ni2+ and Cd2+ at concentrations of approximately 50 mg L−1 in wastewater is investigated using an agricultural adsorbent, longan hull, and the adsorptive mechanism is characterized. The maximum adsorption capacity of approximately 4.19 mg g−1 Cd2+ was obtained under the optimized conditions of room temperature, pH 5.0, and a solid-to-liquid ratio of 1:30 in approximately 15 min. For Ni2+, the maximum adsorption capacity of approximately 3.96 mg g−1 was obtained at pH 4.7 in approximately 20 min. The adsorption kinetics for both metal ions on the longan hull can be described by a pseudo second-order rate model and are well fitted to the Langmuir adsorption isotherm. The adsorption mechanism of the longan hull to Ni2+ and Cd2+ ions is shown to be a monolayer adsorption of metal ions onto the absorbent surface. Thereinto, the longan hull adsorbent contains N–H, C–H, C=O, and C=C functional groups that can form ligands when loaded with Ni2+ and Cd2+, which reduces the fluorescence of the dried longan hull material.

Biosorption of Basic Textile Dye from Aqueous Solution Using Pongamia pinnata as Adsorbent

2018 ◽  
Vol 877 ◽  
pp. 13-19
Author(s):  
Bhargavi Gunturu ◽  
Geethalakshmi Ramakrishnan ◽  
Renganathan Sahadevan
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Mass Transfer Rate ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Textile Dye ◽  
Dye Uptake ◽  
Adsorption Parameters

In the present study, the efficiency of biosorbent derived form Pongamiapinata to remove a basic textile dye Methylene Blue from an aqueous solution was evaluated in batch system. The influence of adsorption parameters such as biosorbent dosage (0.2-1.0g/L), PH (2-10) and initial dye concentration (30-110 mg/L) on the biosorption process was studied. It was noticed that adsorbent dosage has negative effect on dye uptake, could be due to reduced mass transfer rate of dye on to adsorbent. High equilibrium uptake was observed at PH 8. However, initial dye concentration has shown linear relationship with dye uptake. As the dye concentration increases, the number of dye molecules available to be adsorbed on to adsorbent surface increases. Equilibrium isotherms for the adsorption of methylene blue was analyzed through Langmuir and Freundlich isotherm models. The data best fit with Freundlich model than Langmuir isotherm model, suggesting the adsorption was by multilayer mechanism. Maximum adsorption capacity (Q ̊) was found to be 40.49mg/g. It can be concluded from the study that the adsorbent derived from P.pinnata can be a potential low cost competent of activated carbon for textile dyes removal.

Sign in / Sign up

Export Citation Format

Share Document